How can I force an image to open fully on screen within action?

In PS CS5 when I open an image with height dimension in range of 1405-1411 or 1873-1882, the image opens half off the bottom of the screen.  Width does opt seem to matter.  
I assume this is a bug, but until fixed I am trying to work around.
For manual editing the vertical fit screen button or zooming out causes the image to come on screen, but is neither of these display options will record in an action. 
When an image is opened half off screen, a Place command does not place accurately for these images.  Thus an action that includes a Place does not run correctly for these images. 
So either I want to find a setting (nothing in preferences that I can find) to force the image to open on screen, or find a command that will run in an action that causes image to come on screen, while not interefering with images that open normally.                     

The insert menu item command, which I had overlooked (perhaps because it is grayed out to virtual invisibility until action is actively recording), solved the problem.
Thanks.
FYI I had tried all the screen mode options.  Made no difference.  
Also FYI a screenshot.  A little less than 1/2 of the image is off screen

Similar Messages

  • Photos in album are only a hash-marked outline the image only shows when scrolling how can I see the image and open the photo?

    Photos in iPhoto album are only a hash-marked outline the image only shows when scrolling how can I see the image and open the photo?

    Make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Select the options identified in the screenshot. 
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    OT

  • How can I force PDF's to open in IE?

    I have Windows 7 machines with IE8, Reader 11 with current patches.  No matter what setting I choose in manage add-ons, PDF's open in Adobe Reader, instead of in IE.  I have reset IE, repaired Adobe Reader and verified settings many times.  How can I force PDF's to open in IE?

    Yes - those were the first steps.  I have also tried the accessiblity assistant options and that also did not allow PDF's to open in Internet Explorer.  I was only able to correct it on one machine by fully removing Adobe Reader 11.0.04, removing the HKCU registry for Adobe and reinstalling.  This is not feasible on 1300 machines.  I would prefer a reg file that I can push, if I can identify which registry entries affect PDF opening in Internet Explorer.

  • How can I force Indesign cs5 to open cs5 documents when both cs5 and cs6 is installed?

    We are using Indesign with cs5-specific plugins. Due to that we have both cs5 and cs 6 installed on our workstations. Trying to assign cs5 documents (INDD) to cs5, windows refuses to let us choose indesign.exe (cs5). How can we force cs5 to be the chosen application for .indd?

    The best way is using Soxy:
    http://www.rorohiko.com/wordpress/downloads/lightning-brain-soxy/

  • How do I force the reader to open to full screen?

    Is there a setting that forces the reader to open to a full screen when I open a doc from within a web site? It goes to the task bar first then having to click on it to see it full screen.
    Thanks,
    Mark

    If you close Firefox while in full screen mode then Firefox should start the next time in full screen mode as well.
    If that doesn't happen the see:
    *http://kb.mozillazine.org/Corrupt_localstore.rdf

  • How can I keep pictures images from  opening up in the body of an email

    Every time I attach a pic in mac mail, it opens in the body of the email.  I never had this issue with Outlook.
    I typically attach several pics at a time, the email becomes very messy.  Any suggestions on how to keep it from opening.
    I am using jpeg images.
    Plantguy1

    It depends.
    When you copy an image from a website in Firefox (right-click > Copy Image), Firefox stores the HTML code that website is using to display the image. Then when you paste into Yahoo mail, Yahoo uses that code to display the image in your message, by linking out to the source site.
    However, if you copy the image from a source other than a web page, Yahoo mail (webmail interface) can't use this technique and although it sometimes seems to show the image in the post, when I send, I just get a strange "inline image" notation in its place.
    If you access your Yahoo mail on a device in a dedicated mail client, then you usually would have more options because the mail program will encode the image into the message.

  • How can I force update image sequences?

    I am using Premiere to composite various image sequences from a 3D program, Blender.  Many times I export a draft version from Blender, import the sequence to Premiere, place it in the time line, then I find that I want to make some changes in Blender and re-render some of the frames.  Of the frames that I re-render, Premiere only updates some of them.
    I did a test where I re-rendered a section with a different background color to the scene.  In Premiere it updated the first three frames, then the fourth was the old image, 5th and 6th were new, 7th was old, 8th and 9th were new, and so on.  It did this for the entire updated image sequence, using a combination of old and new frames.
    I did the above test three times.  The first time I saw mixed frames, the second time everything imported fine, the third time I got the mixed frames again.
    If I restart premiere, then it goes through the "media pending" screen for all of my media and it then shows the correct updated frames, but that would be inconvenient to have to restart premiere every time I want to see my new frames.
    I am using Premiere Pro CS5.0.3, on a 2.66 Ghz Quad-Core Mac Pro with 8GB of RAM.  The files are located on an eSATA RAID 5 array.
    Is there a way I can force Premiere to update the frames in the image sequences?
    Does anyone else have these problems?  What do you do when dealing with many image sequences that you update frequently?
    Thanks for any help.

    Is there a way I can force Premiere to update the frames in the image sequences?
    Three choices.
    1. Don't leave Premiere open while rendering in another
    application (this is what I do).
    Overwritten files will update when you launch Premiere.
    2. Right-click your image sequence in the Project window,
    select "Make Offline...>Media Files Remain on Disk>OK.
    Then, right-click your image sequence in the Project window,
    select "Link Media...
    3. Close then re-open your project without exiting Premiere.
    File>Close (Ctrl>W), then re-open same project.

  • How can I force a link to open in a new tab on a Mac!?

    On Mac, CMD + Click only opens a link in a new tab if that link is located on that same subdomain and domain. If the link goes to another domain or subdomain it will just ignore the click!!!
    For example, on www.cnn.com I can CMD+Click on a number of article and they will open in a new tab. However, if the article is to a money.cnn.com or to some other website my CMD+click will be ignored.
    Also, would be nice to do the same in gmail. Actually, in gmail the link opens in another tab, but you are forced into that tab, so again the expected behavior of opening in another tab while remaining on the current page is being ignored.
    Seems to be an ongoing issue for a few years a no one has provided a decent answer other than install a plug-in. Also, several 'about:config' options I've read about only talk about behavior when opening a new window, nothing dealing with the ignored clicks.

    guig2, thanks for the response, but I don't believe this will help. Of the TABs options in preferences the only possibly relevant one is to force a link that would normally open in a new window to open as a tab instead.
    As for the plugin the two 'secret options' it talks about, I have already tried, which are basically a twist on the preference options.
    It also seems from the reviews of the plugin that it doesn't always work, or doesn't allow you to select which site open in a new tab, which is what I want.
    Is there some way to force firefox to interpret CMD+Click as a right-click->"Open in new tab," basically the context menu always works and is the expected behavior for CMD+Click (which doesn't always do this, possible due to the page modifying the behavior).

  • How can I force pop-ups being opened in a new tab

    We've a new software which always opens a pop-up window when clicking on the Java links. The content of such a re-sizable window perfectly fits into a new tab.
    I'd like to force those new windows into a new tab.
    Pop-up blocker is active and that internal site is in the exception list.
    So it would be nice to have an option field for that in the general settings or in the Pop-up blocker settings.
    This is no bug, but could be a new feature of Firefox (like in IE).
    Thanks &
    Kind regards,
    Peter Marbler

    The easy way is to install 'Tab mix plus' addon and under 'links' set 'Java script & pop up restriction' to 'open all pop ups in tabs'.
    You can also use https://addons.mozilla.org/en-US/firefox/addon/tab-mix-plus/ to tweak a bunch of other tab settings.
    There is always about:config but more often than not there is the easy way, an addon that will do it for you.

  • How can I force Excel hyperlinks to open Acrobat Pro rather than Acrobat Reader?

    My Excel (2010) hyperlinks to PDF file always open the Reader...but I want these files to open in Acrobat Pro (X) so I can use all the tools.
    Is this possible?
    Can I uninstall the reader? Will that force Pro to be the default file opener?
    Thanks.
    SS

    Open Acrobat -> Click to 'Edit' menu -> Preferences -> General (Category)
    Now click on "Select Default PDF Handler" button choose Acrobat X from the drop-down and then click apply.
    It will reset Acrobat X as a default viewer and your all link will open in Acrobat then.

  • How can I force a popup to open in a new tab instead of opening a new window?

    I want to keep any links that I click from opening a new window, ie. if I click on a link in an open tab that opens a new window, I want it to open in a new tab instead. I am on Firefox 5.0.

    You can look at the browser.link.open_newwindow prefs on the about:config page.
    * http://kb.mozillazine.org/browser.link.open_newwindow.restriction (0)
    * http://kb.mozillazine.org/browser.link.open_newwindow (3)
    To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
    If you see a warning then you can confirm that you want to access that page.<br />
    *Use the Filter bar at to top of the about:config page to locate a preference more easily.
    *Preferences that have been modified show as bold(user set).
    *Preferences can be reset to the default or changed via the right-click context menu.

  • How can I force child windows to open on the same display as the parent?

    I have a MacBook running Lion.
    I use an external monitor. My work involves using a lot webapps and I frequently have popups I need to see and use. If I am on the external monitor, the popups always go the main laptop screen. (I have the laptop open.)
    I use Chrome and haven't had much luck googling a fix because child and parent tend to bring up results about parental controls which is not my issue.
    Any ideas?
    Thanks.

    Which screen displays the menu and the dock? If it's not your external screen, you can choose it as your main screen by going to System Prefs > Displays and dragging the white line on top of the internal screen to the external one. However if you do that you will have the same problem with your laptop screen...

  • How can I force a document to open on page one?

    Using Acrobat pro 8.0 and Windows XP. I have a 2 page fill-in form that I have inherited that has no security. It always opens on page 2. I want it to open on page one. In preferences I’ve specified that it should open on the last page viewed. I’ve explored view/navigation panels and found nothing that will alter the opening sequence. Regardless of what I do it opens on page 2.

    View the PDF's Document Properties under the Initial View tab. Perhaps the "Open to page" value has been set to page 2.
    Be well...

  • How can I force mailto: links to open my webmail client in a new tab?

    I have configured Firefox 5 to use my Hotmail account as the default client when clicking 'mailto:' links. I would like to know if it is possible to have my webmail client open in a new tab by default when composing a message, so as not to navigate away from the page I was viewing.

    Open a new tab. In the address bar type; '''''About:Config''''' and press
    enter. If you get a page that warns you about continuing, press the
    '''''I will be careful''''' button. In the search bar, type; '''''Newtab'''''.
    Look for; '''''Browser.newtab.url'''''. Right click and select '''''Modify'''''.
    Type; '''''About:home''''' (or what ever page you want) and press
    enter. That should do it.
    .

  • How can I get an image to open from Lr 4.4 and edit in CS4 with the Lr edits intact?

    I get a warning message in Lr saying I need to update my camera raw to 7.4 and have done so. No change though.

    That's impossible. CS4 only supports ACR up to 5.6 and LR 4.4 equals ACR 6.7.
    Mylenium

Maybe you are looking for

  • How to create multiple tabs of report in 1 crystal report file

    Hi, Is there any feature in Crystal report 2008 on creating multiple tabs of report similar to Web-I? If there is, could you give me help on this. Thank you in advance. Rose

  • How to use 1 profile on server for multiple PCs

    Is it possible to move an existing profile (at all!) to a home server and configure it as the default - if not only - profile on other installations on other PCs, thus avoiding sync-related plug-ins?

  • Assign several customers to return Vendor?

    Hello, we are shipping back goods to the Vendor for repair. We flag the vendor as a return vendor and the system creates a customer (ship-to) automatically. Is it however possible to assign more than one customer in case we have more ship-to addresse

  • TAXINN - Excise Calculation - FM

    Dear Friends, in my company we are using TAXINJ , but now we shifted to TAXINN .. for Excise Calculation i used the FM - "J_1I6_DETERMINE_EXCISE_RATE" but i think its calcu.. only for TAXINJ . in new TAXINN its not giving me output.. In TAXINJ its de

  • How do i clear address bar history?

    I tried Ctrl+Shift+Delete and selected all the options and set the time range to everything but it still auto fills the address bar when i type.