How can I force update image sequences?

I am using Premiere to composite various image sequences from a 3D program, Blender. Many times I export a draft version from Blender, import the sequence to Premiere, place it in the time line, then I find that I want to make some changes in Blender and re-render some of the frames. Of the frames that I re-render, Premiere only updates some of them.
I did a test where I re-rendered a section with a different background color to the scene. In Premiere it updated the first three frames, then the fourth was the old image, 5th and 6th were new, 7th was old, 8th and 9th were new, and so on. It did this for the entire updated image sequence, using a combination of old and new frames.
I did the above test three times. The first time I saw mixed frames, the second time everything imported fine, the third time I got the mixed frames again.
If I restart premiere, then it goes through the "media pending" screen for all of my media and it then shows the correct updated frames, but that would be inconvenient to have to restart premiere every time I want to see my new frames.
I am using Premiere Pro CS5.0.3, on a 2.66 Ghz Quad-Core Mac Pro with 8GB of RAM. The files are located on an eSATA RAID 5 array.
Is there a way I can force Premiere to update the frames in the image sequences?
Does anyone else have these problems? What do you do when dealing with many image sequences that you update frequently?
Thanks for any help.

Is there a way I can force Premiere to update the frames in the image sequences?
Three choices.
1. Don't leave Premiere open while rendering in another
application (this is what I do).
Overwritten files will update when you launch Premiere.
2. Right-click your image sequence in the Project window,
select "Make Offline...>Media Files Remain on Disk>OK.
Then, right-click your image sequence in the Project window,
select "Link Media...
3. Close then re-open your project without exiting Premiere.
File>Close (Ctrl>W), then re-open same project.

Similar Messages

How can I force an image to open fully on screen within action?

In PS CS5 when I open an image with height dimension in range of 1405-1411 or 1873-1882, the image opens half off the bottom of the screen. Width does opt seem to matter.
I assume this is a bug, but until fixed I am trying to work around.
For manual editing the vertical fit screen button or zooming out causes the image to come on screen, but is neither of these display options will record in an action.
When an image is opened half off screen, a Place command does not place accurately for these images. Thus an action that includes a Place does not run correctly for these images.
So either I want to find a setting (nothing in preferences that I can find) to force the image to open on screen, or find a command that will run in an action that causes image to come on screen, while not interefering with images that open normally.

The insert menu item command, which I had overlooked (perhaps because it is grayed out to virtual invisibility until action is actively recording), solved the problem.
Thanks.
FYI I had tried all the screen mode options. Made no difference.
Also FYI a screenshot. A little less than 1/2 of the image is off screen

I had over 200 e-mails. I went to my webmail and deleted most of them. However, my iPhone still shows 200 e-mails. How can I force my iPhone to update from the e-mail server? Or will I have to delete each e-mail from my iPhone as well? Thanks.

I had over 200 e-mails. I went to my webmail and deleted most of them. However, my iPhone still shows 200 e-mails. How can I force my iPhone to update from the e-mail server? Or will I have to delete each e-mail from my iPhone as well? Thanks.

You may have to try deleting all the music from your phone (by going to Settings>General>Usage>Music, swipping All Music and tapping Delete), then sync it all back on with iTunes in order to fix this.

Photoshop CC (2014) claims to be up to date, although it is still running Camera Raw 8.6.0.254. How can I force an update to ACR 9?

How can I force PS CC (2014) to update Camera Raw?

I finally got through to Adobe Support chat, and got a direct link to the update. Problem solved.

How can I force-install iOs5/6 apps on my iPod Touch?

Hi, I have an iPod touch version 4.3.5 (ML1). Model is MC540C.
The App Store sometimes bars me from installing apps because the app has a minimum requirement of iOS 5 or 6. How can I force my iPod to install these apps anyway?

No, it is more than the screen dimension.
You have a 4G iPod, why not update?
To update:
iOS 4: Updating your device to iOS 5 or later
You need iTunes 10.7 or later on the computer

How can I save the images to the iPhone anywhere

Hello I own Time capsule 3 tb. How can I save the images to the iPhone anywhere in Time capsule
note i used fileexplorer when Outside the home isee Outside Message " error connection failed with the error operation time out "
Thanks

Most Simple Back Up:
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store
If you want to back up the Photos only:
Export them using the File -> Export command.
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue.

When I try to same an image under the command 'save as' it will only let me save as file types 'firefox document' or 'all files' and when I try to look at them later they dont work. How can I save an image as the same file type it is on the web site?!

When I try to save an image under the command 'save as' it will only let me save as file types 'firefox document' or 'all files' and when I try to look at them later they dont work. How can I save an image as the same file type it is on the web site?!
== This happened ==
Every time Firefox opened
== I updated to one of the firefox versions (Not sure which one it was)

Thanks Alex, but sadly I already tried that. Neither .docx or .xlsx files show up in the content list. They both show as a Chrome HTML document so changing how Firefox addresses those doesn't help since it thinks its the same type of file. I don't think I can manually add files into the "Content Type" left side nav.

How can I transafer my images please from PC to iphone 4s

how can I transafer my images ,please, from PC to iphone 4s.I dont understand how can I do it. Where is the options to add photos..I just remember that I must synchronize something..I've tried to find in internet but I see another interface of itunes on all kind of videos? I have anotherinterface in itunes.Ive allready update my itunes and iphone and have a latest version of IOS ..What is f...g that?please help me..

Also, the reason your iTunes interface may look different may be covered by the following in iTunes: Syncing photos
Click the Device button in the upper right corner. (If viewing the iTunes Store, click the Library button in the upper-right corner first.) If you don't see your device, choose Hide Sidebar from the View menu.

Itunes and proxy settings. Itunes keeps the proxy setting from IE and I can't adapt it due to company policy. How can I force itunes to use firefox?

itunes can not connect to server and I can't find its proxy settings.
So I think it uses these from IE and those are blocked by company policy.
So, how can I force itunes to use the firefox settings

I fixed this issue (with help from tech support) and it involved several things.
After adding a song to iTunes, right-click on the song in iTunes and select "Update iTunes Match."
OR go to the iTunes menu-->Store-->Update iTunes Match.
Maybe that's the reason, it just hadn't updated to the cloud.
OR maybe it's not a high-enough bitrate file. This happens to me because most of my tunes are home-recorded.
Sometimes converting to .mp3 or Create AAC version might work. (You do this with a right-click in iTunes, and then you will want to remove the original file from iTunes.)
There is an iTunes Preferences setting, under General Preferences called Import Settings. Try setting it to AAC Encoder and iTunes Plus. That (I think) causes imports to be slightly better quality.
Good luck! The tech support person at Apple is requesting that a knowlege-base article be written about this.

When I switch back to an ongoing application, from the switcher, it reverts to its own 'homepage' rather than the stay at the state/stage I left it at. How can I force applications to maintain the current state?

iPhone 4S with the latest updates 8.1.3 (12B466) installed.
When I switch back to an ongoing application, from the switcher, it reverts to its own 'homepage' rather than the stay at the state/stage I left it at.
How can I force applications to maintain the current state?
I am in the process of getting enough screenshots to demonstrate further.

ios7 keeps refreshing apps after switching
solcwd

How can I use an image as a folder background on icon

vista updated firefox - how can I use an image as a folder background for an icon of that folder (for desktop)

This is not a Firefox related issue or Firefox setting etc. This is a windows or OS setting, I provided the link below on how to change this in Windows Vista.
See:
'''[http://answers.microsoft.com/en-us/windows/forum/windows_vista-desktop/how-do-i-change-the-folder-icon-in-vista-to-one/01261170-4e02-4c4b-8c02-141d1524ad3e?auth=1]'''

How can I read the image from database into form

hi everyone
if I have table like this
create table test
(id number(10),
pic long raw);
in this table record
in form If I have block non database
how can i read the image into non database item
I try with this code but no good
select pic into :photo from test where id=5;
photo its non database item kind image
how can i invoke image into item
thanks alooooooot

Hello,
You can't select image with select query. You need to create another database block from test table which has item binds with database pic column. Now in where condition in test block's property you have to write id=5. Change test block's properties UPDATE ALLOWED, INSERT ALLOWED, DELETE ALLOWED to NO. Only Query allowed property set to YES.
Now in your particular trigger write the code
GO_BLOCK('test');
Execute_Query;
please mark if it help you or correct
Regards,
Danish

How can I save the images and movies on a external Disk from iphoto program, to protect the images when problems occur in the laptop,

How can I save the images and movies on a external Disk from iphoto program, to protect the images when problems occur in the laptop,

Most Simple Back Up:
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex: Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically.
Example of such apps: Chronosync - but there are many others. Search on MacUpdate or the App Store
If you want to back up the Photos only:
Export them using the File -> Export command.
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue.

How can I force PS Touch to sync?

How can I force PS Touch to sync? It only syncs randomly, about once or twice a day, even if no file is open. So, it is usually an out-of-date picture of what I have stored on the Creative Cloud. I have tried toggling the sync switch, quitting and restarting the app, deleting and reinstalling the app, signing in and out of Creative Cloud, and backing in and out of folders. I am at 6% of my storage limit, and 89% of my rope.

Q: When you save a new PSTouch project to the PSTouch gallery (with sync on) what is the sync status showing? In Progress? Completed?
A: It starts with "in progress" then switches immediately to 0% complete, and stays that way permenantly, even when left to sync for more than 24 hours. On the same iPad, I also have Adobe Ideas, Adobe Collage, Adobe Proto -- all sync perfectly. Also working fine on this iPad -- Adobe Revel and Adobe Content Viewer.
Q: What happens when you rename a PSTouch file in the CreativeCloud browser. Are the changes synced back to your PSTouch app.
A: No. Nothing at all will sync from the Creative Cloud, and nothing at all syncs from the PSTouch App to the Cloud either. I am, however, able to download images from the CC into PSTouch, but the resulting files won't sync back, I must email them to another device to add them back to the CC. The view of the Creative Cloud in the main PSTouch browser window is always out of date, several days old by now.
Q: What kind of files are missed during sync? Are those files named with special characters.
A: All files and folders are missed during the sync, because the sync does not occur. No files sync at all. File name examples: brochure.indd image.jpg image.psdx Folder Name
Q: Are you on a wifi network?
A: Yes, definitely connected to my functioning high speed WiFi.
Thanks Gruele

An App is corrupt on my iPhone. It will not delete in the usual way (jiggle then X) and it prevents the sync from completing - how can I force its removal?

An App is corrupt on my iPhone. It will not delete in the usual way (jiggle then X) and it prevents the sync from completing - how can I force its removal?

Hi, Anyone who has this problem: This is now resolved on my phone simply by the prudent timing of the phone software update to 7.1. This update cleared the corrupt map and loaded the original - all my cares went away !! It looks like a Restore would probably work as well, on this basis.

How can I force update image sequences?

Similar Messages

Maybe you are looking for