How can i found which program consume more memory in server

Dear Experts,
please do needful on below issue
in my servers one server is very slow i checked in all arear
but i didnot found any issues on my servers
now i have one doubt
is their any problem in abapers coading
so i need to check how much memory it will takes for sql statments
i dont know how can i get this requirment
so please tel me how can i check sql statments which they consuming more memory in my server
Regards

Hi,
please do needful on below issue
For the same, I suppose ?
Use Transaction ST03, choose the period (day, week or month), select "Memory Use Statistics" and sort by "Average Total Memory Usage " or "Maximum Extended Memory Usage".
Check specially if some programs use Private Memory.
Regards,
Olivier

Similar Messages

IOS obviously allows only 10 Apps to be Chosen in The "Open in" function. How can I control which Apps ( if more than 10 are installed) can be selected?

iOS obviously allows only 10 Apps to be Chosen in The "Open in" function. How can I control which Apps ( if more than 10 are installed) can be selected?

I think that is influenced by the order in which the apps are installed on the iPad (I believe that it's the most recent 10 ?) - but as I haven't got more than 10 apps that support any document/file type I can't check.
If you want to able to edit the list, then you could try leaving feedback for Apple : http://www.apple.com/feedback/ipad.html

How can I determine which programs/files are using disc space?

A question for the professionals:
What program on my MacBook Pro can I run to determine which programs and files are taking up the percentage of disc space? I am running at 72 gb, which is great, but I need to know what is using up the rest of it. Thank you in advance to any helpful solutions.
Matthew

activity monitor for RAM (its already in your utilities folder) http://support.apple.com/kb/HT1342. OmniDiscSweeper for hard drive http://www.omnigroup.com/products/omnidisksweeper/ (needs to be downloaded)

How can I inform which program to use to open a Docx when it doesn't show in my dropdown list in attachments?

When I attempt to open a Docx type file Thunderbird is attempting to open the document with an old version of Office (2003). I have upgraded to (2013). I have followed the suggestions of going to Tools, Options and Attachments to assign which program should be used to open which type of item. Microsoft isn't even in the list at all. How do I fix this?

In Tools > Options > Attachments > incoming tab
delete the action for docx documents - located in the Action drop down selection.
It will remove it from the list.
* Then select email with docx attachment.
* Right click on attachment and select 'Open'
It will ask what to do
* Select 'Open With'
If TB does not select as default: MicroSoft Office Word
* click on drop down and select 'Other'
If MicroSoft Office Word is still not available:
* click on 'Browse' to locate the WINWORD.EXE file
If running Windows OS 32bit then it will be in this location :
* C:\Program Files\Microsoft Office\Office15\WINWORD.EXE
If running Windows OS 64bit then it will be in this location :
* C:\Program Files(86)\Microsoft Office\Office15\WINWORD.EXE
* Then click on click on 'Open'
* select: 'Do this automatically for files like this from now on' click on OK"

Using Windows8, how can you change which program to import photos from iphone?

When I bought a Windows8 PC (Lenovo Yoga) and synched iphone the first time, it defautled to the Photo App on my PC. I no longer seem to get the pop up window I used to get under Windows7 asking me if it should use the default program to select and import photos. Now it directly opens the photo app and asks which to import. I'm sure its there somewhere but I can't find any way to change which tool is used. Any suggestions would be greatly appreciated.

There is only one way
see here
http://support.apple.com/kb/HT4083
also works with Win8

How to find top 10 SQL statments which are consuming more cpu time.

hi all,
Is there any command or script to monitor the top 10 sql statments which are consuming more cpu time.
I know by using AWR REPORT we can find it, i want the command or script to find the top cpu utilization sql statments.
Regards
Subhash.

Subhash,
A quick and dirty Google search could have get you started with the following:
Thread: how to get top CPU consuming sql oracle 10g
Re: how to get top CPU consuming sql oracle 10g
Oracle SQL top sessions
http://www.dba-oracle.com/oracle10g_tuning/t_sql_top_sessions.htm
"How to Find top 10 expensive sql's", version 9.2.0
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:73325450402303
HTH,
Thierry

Program which is consuming more heap

Hi Guys,
I am getting 'java output of memory' error regularly.My heap size is 1GB
Guys,can you help me to find the program which is consuming more heap?
Thanks

Please mention the details of the application release, database version and OS.
I am getting 'java output of memory' error regularly.My heap size is 1GBHow do you get this error? What is the complete error message?
Guys,can you help me to find the program which is consuming more heap?Is the issue with concurrent programs? If yes, is it with seeded/custom ones or both? What are the types of those concurrent programs? Please elaborate more. If the issue with the OPP, please post the complete error message from the OPP log file.
Thanks,
Hussein

I would like to read a text file in which the decimal numbers are using dots instead of commas. Is there a way of converting this in labVIEW, or how can I get the program to enterpret the figures in the correct way?

The program doest enterpret my figures from the text file in the correct way since the numbers contain dots instead of commas. Is there a way to fix this in labVIEW, or do I have to change the files before reading them in the program? Thanks beforehend!

You must go in the labview option menu, you can select 'use the local
separator' in the front side submenu (LV6i).
If you use the "From Exponential/Fract/Eng" vi, you are able to select this
opton (with a boolean) without changing the labview parameters.
(sorry for my english)
Lange Jerome
FRANCE
"Nina" a ecrit dans le message news:
[email protected]..
> I would like to read a text file in which the decimal numbers are
> using dots instead of commas. Is there a way of converting this in
> labVIEW, or how can I get the program to enterpret the figures in the
> correct way?
>
> The program doest enterpret my figures from the text file in the
> correct way since the numbers contain dots instea
d of commas. Is there
> a way to fix this in labVIEW, or do I have to change the files before
> reading them in the program? Thanks beforehend!

How can I find the program which is calling my SAPscript??

How can I find the program(std/Custom) which is calling my SAPscript form??
Regards,
Shashank.

Hi
check in NACE transaction or TNAPR table
reward points to all helpful answers
kiran.M

Can I choose which programs or apps upload data to iCloud?

My iCloud account tells me that my 5GB are full (that's right from the start when I updated the software to iOS5 :-S) Well, I noticed that there are actually just a few apps that I would want to make data backups for in iCloud. Can I choose which programs use that function? The only option I found so far is to turn the data backup function off or on, for ALL the apps. But I only want to use it for a FEW ones! Is this supported in iOS5??
PS. How come it gets full so quickly? The programs that uses most data (Hipstamatic for example) use only barely 0,5GB. So what I can see the 5GB shouldn't be full yet. What have I missed?

I think starting from the second home screen, the new app will be placed in the first available space. If this is the case, you would be able to control the placement manually by making sure your landing screen has empty icon slots and all previous screens, with the exception of the first one, have all of the icon slots occupied. I did run across an app that seemed like it would allow the user to create placeholder icons on the home screens but I can not think of the keywords to pull it up now. There are several icon creators/enhancers that may do the same thing. You can use one of these apps or use the Safari button to Add to Home Screen, to fill up the screens. You could even use a folder to store and deploy your screen filler icons. It seems like it would be more trouble than it's worth but I do have my home screens assigned for different roles. Hopefully Apple will continue to refine the user interface.

How can I determine which image was clicked in 3D carousel?

I have been modifying some 3D carousel code that I found in hopes that I can get it such that when image "resolv2.jpg" (or any of my other images) is clicked on at the front of my carousel, it goes to a specific webpage. By just replacing "moveBack(event.target) from the toggler section of the code with "navigateToURL:(newURLRequest('http://google.com'), the target DOES sucessfully go to google when clicked on. However, I want to modify this code by altering the else statement to say something to the effect of "else if event.target (clicked on object) is 'resolv2.jpg' THEN go to google". So essentially, my question is how can I determine which image was clicked? Here is the entire code with the area I was altering bolded:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="vertical" applicationComplete="init();" backgroundGradientColors="[#000033, #000033]" backgroundGradientAlphas="[1.0, 1.0]">
<mx:Script>
          <![CDATA[
//Import Papervision Classes
               import org.papervision3d.scenes.*;
               import org.papervision3d.cameras.*;
               import org.papervision3d.objects.*;
               import org.papervision3d.objects.primitives.*;
               import org.papervision3d.materials.*;
               import org.papervision3d.materials.shadematerials.*;
               import org.papervision3d.materials.utils.MaterialsList;
               import org.papervision3d.lights.*;
               import org.papervision3d.render.*;
               import org.papervision3d.view.*;
               import org.papervision3d.events.*;
               import org.papervision3d.core.*;
               import org.papervision3d.lights.PointLight3D;
               import flash.filters.DropShadowFilter;
                     import caurina.transitions.*;
                     private var numOfItems:int = 5;
                     private var radius:Number = 600;
                     private var anglePer:Number = (Math.PI*2) / numOfItems;
                     //private var dsf:DropShadowFilter = new DropShadowFilter(10, 45, 0x000000, 0.3, 6, 6, 1, 3);
               public var angleX:Number = anglePer;
         public var dest:Number = 1;
               private var theLight:PointLight3D;
        //Papervision Engine
               private var viewport:Viewport3D;
               private var scene:Scene3D;
               private var camera:Camera3D;
               private var renderer:BasicRenderEngine;
         private var planeArray:Array = new Array();
         [Bindable]
         public var object:Object;
         private var arrayPlane:Object;
         private var p:Plane;
         //Initiation function
         private function init():void
         viewport = new Viewport3D(pv3dCanvas.width, pv3dCanvas.height, false, true);
         pv3dCanvas.rawChildren.addChild(viewport);
         viewport.buttonMode=true;
         renderer = new BasicRenderEngine();
         scene = new Scene3D();
         camera = new Camera3D();
         camera.zoom = 2;
         createObjects();
         addEventListeners();
//Create Objects function
          private function createObjects():void{
          for(var i:uint=1; i<=numOfItems; i++)
                    /* var shadow:DropShadowFilter = new DropShadowFilter();
                    shadow.distance = 10;
        shadow.angle = 25; */
                    var bam:BitmapFileMaterial = new BitmapFileMaterial("images/resolv"+i+".jpg");
                    bam.oneSide = false;
                    bam.smooth = true;
        bam.interactive = true;
                    p = new Plane(bam, 220, 200, 2, 2);
                    p.x = Math.cos(i*anglePer) * radius;
                    p.z = Math.sin(i*anglePer) * radius;
                    p.rotationY = (-i*anglePer) * (180/Math.PI) + 270;
                    scene.addChild(p);
                    //p.filters=[shadow];
                    p.extra={pIdent:"in"};
                    p.addEventListener(InteractiveScene3DEvent.OBJECT_PRESS, toggler);
        planeArray[i] = p;
          // create lighting
        theLight = new PointLight3D();
        scene.addChild(theLight);
        theLight.y = pv3dCanvas.height;
          private function toggler(event:InteractiveScene3DEvent):void
                        // if the cube's position is "in", move it out else move it back
                        if (event.target.extra.pIdent == "in")
                                moveOut(event.target);
                        else
                               moveBack(event.target);
                private function moveOut(object:Object):void
                          trace(object +" my object");
                        // for each cube that was not selected, remove the click event listener
                        for each (var arrayPlane:Object in planeArray)
                                if (arrayPlane != object)
                                        arrayPlane.removeEventListener(InteractiveScene3DEvent.OBJECT_PRESS, toggler);
                        //right.enabled=false;
                        //left.enabled=false;
                        // move the selected cube out 1000 and rotate 90 degrees once it has finished moving out
                        Tweener.addTween(object, {scaleX:1.2, time:0.5, transition:"easeInOutSine", onComplete:rotateCube, onCompleteParams:[object]});
                        Tweener.addTween(object, {scaleY:1.2, time:0.5, transition:"easeInOutSine", onComplete:rotateCube, onCompleteParams:[object]});
                        // set the cube's position to "out"
                        object.extra = {pIdent:"out"};
                        // move the camera out 1000 and move it the to same y coordinate as the selected cube
                        //Tweener.addTween(camera, {x:1000, y:object.y, rotationX:0, time:0.5, transition:"easeInOutSine"});
                private function moveBack(object:Object):void
                        // for each cube that was not selected, add the click event listener back
                        for each (var arrayPlane:Object in planeArray)
                                if (arrayPlane != object)
                                        arrayPlane.addEventListener(InteractiveScene3DEvent.OBJECT_PRESS, toggler);
                        // move the selected cube back to 0 and rotate 90 degrees once it has finished moving back
                        Tweener.addTween(object, {scaleX:1, time:0.5, transition:"easeInOutSine", onComplete:rotateCube, onCompleteParams:[object]});
                        Tweener.addTween(object, {scaleY:1, time:0.5, transition:"easeInOutSine", onComplete:rotateCube, onCompleteParams:[object]});
                        // set the cube's position to "in"
                        object.extra = {pIdent:"in"};
                        // move the camera back to its original position
                        //Tweener.addTween(camera, {x:0, y:1000, rotationX:-30, time:0.5, transition:"easeInOutSine"});
                        //right.enabled=true;
                        //left.enabled=true;
                private function goBack():void
                        // for each cube that was not selected, add the click event listener back
                        for each (var arrayPlane:Object in planeArray)
                                if (arrayPlane != object)
                                        arrayPlane.addEventListener(InteractiveScene3DEvent.OBJECT_PRESS, toggler);
                private function rotateCube(object:Object):void
                        //object.rotationX = 0;
                        //Tweener.addTween(object, {rotationZ:0, time:0.5, transition:"easeOutSine"});
          private function addEventListeners():void{
    this.addEventListener(Event.ENTER_FRAME, render);
//Enter Frame Listener function
private function render(e:Event):void{
                 renderer.renderScene(scene, camera, viewport);
                 camera.x = Math.cos(angleX) * 800;
                 camera.z = Math.sin(angleX) * 800;
private function moveRight():void
          dest++;
          Tweener.addTween(this, {angleX:dest*anglePer, time:0.5});
          //goBack();
private function moveLeft():void
          dest--;
          Tweener.addTween(this, {angleX:dest*anglePer, time:0.5});
          //goBack();
          ]]>
</mx:Script>
          <mx:Canvas width="1014" height="661">
          <mx:Canvas id="pv3dCanvas" x="503" y="20" width="400" height="204" borderColor="#110101" backgroundColor="#841414" alpha="1.0" backgroundAlpha="0.57">
          </mx:Canvas>
          <mx:Button x="804" y="232" label="right" id="right" click="moveRight(),goBack()"/>
          <mx:Button x="582" y="232" label="left" id="left" click="moveLeft(),goBack()" />
          </mx:Canvas>
</mx:Application>

Your answer may be correct, but I am very much a beginner to actionscript, and I was wondering moreso if it is possible to determine the root/url (i.e. images/resolv2.jpg)? Or even if InteractiveScene3DEvent calls a variable that holds this url? However, specifically, I'm just wondering if the actionscript itself could determine the url in a line of code such as "if object == BitmapFileMaterial("/images/resolv2.jpg"); "? Also, here's a copy of InteractiveScene3DEvent in more detail if you think that will help:
public class InteractiveScene3DEvent extends Event
                     * Dispatched when a container in the ISM recieves a MouseEvent.CLICK event
                    * @eventType mouseClick
                    public static const OBJECT_CLICK:String = "mouseClick";
                     * Dispatched when a container in the ISM receives an MouseEvent.MOUSE_OVER event
                    * @eventType mouseOver
                    public static const OBJECT_OVER:String = "mouseOver";
                     * Dispatched when a container in the ISM receives an MouseEvent.MOUSE_OUT event
                    * @eventType mouseOut
                    public static const OBJECT_OUT:String = "mouseOut";
                     * Dispatched when a container in the ISM receives a MouseEvent.MOUSE_MOVE event
                    * @eventType mouseMove
                    public static const OBJECT_MOVE:String = "mouseMove";
                     * Dispatched when a container in the ISM receives a MouseEvent.MOUSE_PRESS event
                    * @eventType mousePress
                    public static const OBJECT_PRESS:String = "mousePress";
                     * Dispatched when a container in the ISM receives a MouseEvent.MOUSE_RELEASE event
                    * @eventType mouseRelease
                    public static const OBJECT_RELEASE:String = "mouseRelease";
                     * Dispatched when the main container of the ISM is clicked
                    * @eventType mouseReleaseOutside
                    public static const OBJECT_RELEASE_OUTSIDE:String = "mouseReleaseOutside";
                     * Dispatched when a container is created in the ISM for drawing and mouse interaction purposes
                    * @eventType objectAdded
                    public static const OBJECT_ADDED:String = "objectAdded";
                    public var displayObject3D                                        :DisplayObject3D = null;
                    public var sprite                                                            :Sprite = null;
                    public var face3d                                                            :Triangle3D = null;
                    public var x                                                                      :Number = 0;
                    public var y                                                                      :Number = 0;
                    public var renderHitData:RenderHitData;
                    public function InteractiveScene3DEvent(type:String, container3d:DisplayObject3D=null, sprite:Sprite=null, face3d:Triangle3D=null,x:Number=0, y:Number=0, renderhitData:RenderHitData = null, bubbles:Boolean=false, cancelable:Boolean=false)
                              super(type, bubbles, cancelable);
                              this.displayObject3D = container3d;
                              this.sprite = sprite;
                              this.face3d = face3d;
                              this.x = x;
                              this.y = y;
                              this.renderHitData = renderhitData;
Thank you so much!

How to identify TOP 5 SQL consuming more CPU time without using statspack

How to identify the TOP 5 SQL queries which are consuming more CPU time during the timespan of 24 hours for entire database. There are N number of users who have issued sql queries, out of which few users have disconnected and few user are still connected to the database(I need to consider all sessions). My database version is 9.0.1. I don't want to use statspack. Is there any way to identify TOP 5 SQL consuming more CPU time without affecting the performance of the database. Can any one help me on this? Its urgent!!.

My database version is 9.0.1. I don't want
to use statspack. Is there any way to identify TOP 5
SQL consuming more CPU time without affecting the
performance of the database. Can any one help me on
this? Its urgent!!.I cant understand why you dont want to use statspack. As it is very easy to use and very quick to identify bottlenecks. Try using statspack. Its really wonderful.
Particularly in your case statspack is the best.
Regards,
Sanju.

I have one library with around 50 Projects (this represent around 1500 pictures) I gave to hundred of them a specific keyword how can I found them ?

I have one library with around 50 Projects (this represent around 1500 pictures)
I gave to hundreds of them a specific keyword how can I found them ?
Marc

If it is ok for you I would like to ask you another question.
With the filter settings removes I discover that I have more then 10'000 pictures !!!!!!!!
As I'm organized to have one archive files per year, I'm discovering a lot of pictures which have a keywords "from MobileMe". Is that correct to assume that is represent the pictures from the old world from mobile.me ?
Sorry but I can't help with this, I never used mobile me so I'm not sure how it worked.
It seems safe to assume that the images tagged with the MobileMe keyword were in your MobileMe galeries but exactly what that indicates I can't say.
regards

I am moving to Alice Springs, Australia, this summer from the U.S. I would like to get the new iPad. How can I found out if I will be able to access all the functionality in Alice? Will I need to purchase a local plan of some sort?

I am moving to Alice Springs, Australia, this summer from the U.S. I would like to get the new iPad to use while traveling back and forth from the U.S. to Australia, and within Australia. How can I found out if I will be able to access all the functionality of the iPad in Alice? Will I need to purchase a local plan of some sort? I have never owned an Apple product before -- I'm a newby!

Aside form the limitation of LTE to the 700MHz and 2.1GHz bands (which rules out LTE in Europe I gather, at least as it stands now) the new iPad should let you use a GSM 3g/2g/edge network anywhere. The CDMA Verizon model will only be able to use it's native CDMA radio band in the USA (that radio will be locked to Verizon), but it's international GSM radio is the same as the AT&T model.
Keep in mind though that by far the cheapest option when abroad is to take advantage of free wifi as much as possible (well, that is always the cheapest option, since it is free). I know several people who have taken their wifi-only iPads and iPad2s to Europe and said they did not find the lack of 3G really inconvenient at all as most towns had plenty of free or cheap wifi access all over the place.
And in 3 years, your iPad will be at least 2-3 generations behind, LTE will have already been replaced by 5G or whatever the next new generation of cellular ends up being named (and the "young" kids will be wondering what the heck 3G even means or meant - dang that stuff was from the olden days!), and you can pitch that ancient piece of technology and start things all over again

How can I determine which computer a share is connected to in /Volumes from terminal or a script?

I run a set of virtual machines via Fusion on an iMac that we run automated tests on for our website. There is a folder on each VM called /Automation that is shared.
I have a python script that runs on the host, that will find an open VM, start it up and then mount the VM's /Automation folder. So if there is only 1 VM powered on, the folder shows up in /Volumes as /Volumes/Automation. The problem is when there are 2 or more VM's powered on, because then the shares start being named /Volumes/Automation-1 and Automation-2 etc. So my question is, how can I determine which computer each share belongs to from terminal or a script?
In other words, I'm looking for something like:
/Volumes/Automation = "FirstVirtualMachineName.local"
/Volumes/Automation-1 = "SecondVirtualMachineName.local"
Is there any way to determine which computer a mounted share is connected to? In the past, I've just unmounted all /Automation folders, and then mounted them in a particular order, but that's unreliable and messy in my opinion. If anyone knows a better way, please let me know. Any help is appreciated.
Thanks,

Well I think I have a workable solution. It's not perfect, but I think it will do the trick. I can put a spotlight comment on the folder similar to 'HostName=OSX-Automation-1.local' and can then retrieve that value from our server with the following python snippet:
import subprocess
out,err = subprocess.Popen(['osascript','-e','tell application \"Finder\" to get comment of \"Macintosh HD:Volumes:Automation-1\"'],stdout=subprocess.PIPE, stderr=subprocess.PIPE).communciate()
So I could just loop through each 'Automation*' folder in /Volumes and grab the name from the spotlight attributes on the directories. I don't think I really need to worry about the comments being overwritten, but I may have one of our launch daemons that run on the VM check that spotlight comment once a minute or something to ensure that the correct value is there.
If it ends up not working well in practice, I'm going to give your suggestion about a config script a shot. It would require a little more up front work, but seems as if it would be pretty solid after that.
Thanks again for helping me think it through

How can i found which program consume more memory in server

Similar Messages

Maybe you are looking for