How can I fully administrate a TC that is being used by multiple users

Each MacBook can now add or delete accounts users in the TC with the AirPort Utility. How can I decide who is the only administrator of the TC?
Thanks

The idea is if you set a password on the TC that nobody else knows,, they cannot change the settings because they cannot actually access the settings.
I repair TC and lots of them come in with password set. I can access the TC screen to see what is happening.. but I cannot change settings. Not unless I do soft reset.
If that isn't working for you, you are not setting the right password.
Set the main TC password.
Once you set that password .. any user attempting access will be asked for the password. Don't tell them.

Similar Messages

How can I remove an iCloud backup that is being used to restore a iDevice, How can I remove an iCloud backup that is being used to restore a iDevice

Hello,
I purchased a new iPhone 5S yesterday and started to use a former iPhone 4S iCloud backup to restore it but as it took 2.5Go of "others" space I decided to reset the iPhone and start from scratch.
I have now properlly restored my new iPhone and would like to remove the old iCloud backup but when I try to erase it (from iCloud submenu or my Mac's iCloud "manage account") it says that it can't be removed as it is being used to restore an iDevice. Is there a way to do that ?
Thanks in advance
Boris

If the lock only came from restore of someone else's backup, you can get rid of that by doing factory restore. That will not help you if your story is not true.

I have Pandora uno that I been playing every month but I don't have the iPhone where I donwload the app now I have a different phone how can I transfer to the one that I'm using now

Ihave pandora uno that i been playing every month but I don't have the iPhone where I donwload the app now I have a different phone how can I transfer to the one that I'm using now

Not sure if you are asking how to obtain the Pandora app on the new phone? If so, the following has information for a variety of phone types including an iPhone: http://www.pandora.com/everywhere/mobile

HT1688 How can I put a secondairy email that my kids use for there apple account? I need to use this one to to get my maill.

How can I put a secondairy email that my kids use for there apple account

As it seems Gmail doesn't accept kids email accounts, but hotmail and yahoo are said to do. I've not managed to set up one for my daughter though! good luck!

How can I tell where my CC licenses are being used?

I own several CC-for-teams seats, but they are activated and deactivated on many computers constantly.
How can I keep track of what licenses are in use on my computers? Are the MAC addresses or hostnames stored someplace?
If I need to retreive a license, must I do so by user (email address), or can I revoke a license from a machine instead?
For that matter, does Adobe offer per-machine or concurrent licensing as an alternative to CC-for-teams? How do Enterprise users manage?
Thanks,
Yet-another-CC-user

Hi DEQRTWDWYQD,
The CC is based on Adobe ID.Each CC Adobe Id entitles you for two installs, so the moment it is tried to be installed on the third computer, it gives you a prompt to deactivate from the previous machines..
If you want to retreive a license, you have to revoke the invite from the Admin console by clicking on the cross in front of the Email Adress.
As of now the enterprise users manage by deploying packages from the creative Cloud Packager.
This link can used for reference:
http://www.adobe.com/products/creativecloud/faq.html
http://helpx.adobe.com/creative-cloud/packager.html
http://helpx.adobe.com/creative-cloud/packager/creative-cloud-packager-faq.html
Regards,
Rajshree

How can I see the phone number that a contact used to call me?

I have several contacts in the addressbook of my iPhone 4 (iOS 5.0.1) for which I have entered multiple phone numbers. In the call history the names of my contacts are shown, which is fine. To call someone back based on the history I would like to know which number was used to call me. Is there a way to get to this information?

It will say "mobile" Home", etc under the name.
You can also tap the blue arrow and see the highlighted number.
iPhone User Guide (For iOS 5.0 Software)

How can I check if my Apple ID is being used on another device

How can I find out what devises are logged into my Apple ID? I think my account has been logged into an Ipad without my consent

If you believe that has happened, change your password. There's no way to verify that such has happened.

How can I burn a Word document that will be used on a PC?

Hello,
I have to burn a Word document onto a disk for a friend who is using either PC or a Mac. It will eventually go to a publisher. I haven't burned a .doc in ages and can't remember how to do it. Do I want to use a CD-R and not a DVD-R? Also can I use Toast and choose the PC option or should I use Disk Utility? If disk utility how do I do it? I just want to make sure it will work on a PC if that is what will be used to extract it?

IT's a non-issue, assuming you have recent versions of OSx and MS Office. Just use the Finder to burn the disc. PC Word reads Mac Word just fine, with some rare exceptions.
-insert blank CD-R, because they are the cheapest, unless your Word doc is more than 700MB.
-drag .doc document into the mounted, untitled CD-R icon.
-using any of several methods (which can vary a bit depending on your OS), use the Finder to burn the CD-R. One way is to click once on the CDR icon, then go to the FInder/File menu and select Burn CD. In OSX.5.x, there are Burn commands in the window for the CDR (i.e. double click on the CDR icon for the root window).
A window should open, asking if you want to burn this disc so that any computer (Mac or PC) can read it.
edit: your Toast method you did while I was typing sounds like it should work, too.
Message was edited by: louie

How can I count only text fields that have been used?

Hi,
I'm using Livecycle Designer for a dynamic form. I have a section of the form that contains field for the user to enter goals and then rate the goal. I'd like to count only the text fields with entries and then have the total number of rates divided by the number of text field entries.
Row 1 , column 1 -- Goal is to pick up 5 apples.   Row 1, column 2 - the rate given is 5
Row 2, column 1 - Goal is to pick up 5 pears. Row 1, column 2 - the rate given is 5
Two goals for a total rating of 10     --- 10 divided by 2 = 5
Is it possible to count only those fields that are populated?
Also, is it possible to create an error message if the user entered 5 goals but only rated 4 of them?

You could do a simple check for null and increase a counting variable if there's a value in the field. Here's a sample:
var goalCount = 0;
if (field1.rawValue != null){
     goalCount = goalCount + 1;
if (field2.rawValue != null){
     goalCount = goalCount + 1;
if (field3.rawValue... etc.
this.rawValue = totalPoints/goalCount;
where totalPoints is a sum of the values in the goal fields. This script is javascript and should be placed in the calculate event of the field showing your average score.

How can I avoid an iPad appears in iTunes when I have multiple users in lion?

Hi,
I have 2 users accounts in Lion, and in both I have iTunes always open. Also have 2 iPads. Both have the sync by wifi enable.
One of the iPads, once was synchronized with the iTunes of one of the users accounts cable, and now want that only tries to sync with the itunes of the oyher user account, because it always try to sync with the first one, and not apearing in the other till I eject and change to the other account.
Thank you
Best regards
Salva

Welcome to the Apple Community.
You would only need homesharing on your iPad if you want to use the remote app (which is quite handy actually). To be able to use the iPad with the Apple TV, you use AirPlay, but the iPad won't show up in a list on the Apple TV, you send content from the iPad itself.
Assuming both devices are on the same network and that AirPlay is not turned off on the Apple TV, then simply tap on the screen when you are watching content you wish to stream to your Apple TV, then tap the airplay icon that appears in the control bar, choose the Apple TV from the menu that appears.
When displaying the content you wish to mirror on the iPad 2 (or better), iPad Mini, iPhone 4S (or better), double tap the home button (quickly) and swipe the bottom row of apps to the right to reveal the playback controls, tap the AirPlay icon and select your Apple TV from the list of available devices.

How can i determine if a UOM conversion is being used in a query?

I need to find all the queries that are using a QTY UOM conversion. i tried to do a where used and it didn't return anything.

Hi,
Check function module RSZ_I_BASIC_CHA_WHERE_USED
also check this (try the program)
Where-used list of an attribute (either display or navigational)
From AHP
Hope it would help.
Regards,
Satya

How do I know if my disk caching is being used?

Hi everybody, I would like to know how can I confirm if my disk caching is being used? And if it is not. How can I make it works?
Here are the specifications of my desktop:
Product Name: h8-1440t
OS: Windows 8.1 Pro with Media Center 64-bit
Microprocessor: Intel(R) Core(TM) i7-3930K CPU @ 3.20GHz
RAM: 16.0GB DDR3 @ 797MHz (9-10-9-26)
Motherboard:  PEGATRON CORPORATION 2ACE (SOCKET 0) 36 °C
Graphics:
HP x2301 (1920x1080@60Hz)
3072MB NVIDIA GeForce GT 640 (MSI) 52 °C
Storage:
931GB Western Digital WDC WD10EZEX-60ZF5A0 (SATA) 29 °C
931GB Western Digital WDC WD10EZEX-60ZF5A0 (SATA) 29 °C
14GB SanDisk SDSA5GK-016G-1006 (SSD)
Optical Drives:
hp BD-RE BH38L
hp DVD A DH16ACSHR
Audio:
IDT High Definition Audio CODEC
======
Additionally:
Hard drives:
-WDC WD10EZEX-60ZF5A0
     Manufacturer Western Digital
     Heads 16
     Cylinders 121,601
     Tracks 31,008,255
     Sectors 1,953,520,065
     SATA type SATA-III 6.0Gb/s
     Device type Fixed
     ATA Standard ACS2
     Serial Number WD-WCC1S1164451
     Firmware Version Number 80.00A80
     LBA Size 48-bit LBA
     Power On Count 2145 times
     Power On Time 204.6 days
     Speed 7200 RPM
     Features S.M.A.R.T., NCQ
     Max. Transfer Mode SATA III 6.0Gb/s
     Used Transfer Mode SATA III 6.0Gb/s
     Interface SATA
     Capacity 931 GB
     Real size 1,000,204,886,016 bytes
     RAID Type None
      S.M.A.R.T
       Status Good
       Temperature 29 °C
       Temperature Range OK (less than 50 °C)
        S.M.A.R.T attributes
      Partition 0
       Partition ID Disk #0, Partition #0
       File System NTFS
       Volume Serial Number FE384C77
       Size 1022 MB
       Used Space 384 MB (37%)
       Free Space 638 MB (63%)
      Partition 1
       Partition ID Disk #0, Partition #1
       Size 360 MB
      Partition 2
       Partition ID Disk #0, Partition #2
       Disk Letter C:
       File System NTFS
       Volume Serial Number 8878D4A2
       Size 908 GB
       Used Space 406 GB (44%)
       Free Space 502 GB (56%)
      Partition 3
       Partition ID Disk #0, Partition #3
       File System NTFS
       Volume Serial Number 80C60E18
       Size 349 MB
       Used Space 296 MB (84%)
       Free Space 53 MB (16%)
      Partition 4
       Partition ID Disk #0, Partition #4
       Disk Letter D:
       File System NTFS
       Volume Serial Number 56971929
       Size 21 GB
       Used Space 18.4 GB (87%)
       Free Space 2.58 GB (13%)
- WDC WD10EZEX-60ZF5A0
     Manufacturer Western Digital
     Heads 16
     Cylinders 121,601
     Tracks 31,008,255
     Sectors 1,953,520,065
     SATA type SATA-III 6.0Gb/s
     Device type Fixed
     ATA Standard ACS2
     Serial Number WD-WCC1S1282644
     Firmware Version Number 80.00A80
     LBA Size 48-bit LBA
     Power On Count 2145 times
     Power On Time 204.6 days
     Speed 7200 RPM
     Features S.M.A.R.T., NCQ
     Max. Transfer Mode SATA III 6.0Gb/s
     Used Transfer Mode SATA III 6.0Gb/s
     Interface SATA
     Capacity 931 GB
     Real size 1,000,204,886,016 bytes
     RAID Type None
      S.M.A.R.T
       Status Good
       Temperature 29 °C
       Temperature Range OK (less than 50 °C)
        S.M.A.R.T attributes
      Partition 0
       Partition ID Disk #1, Partition #0
       Disk Letter E:
       File System NTFS
       Volume Serial Number 4847795E
       Size 931 GB
       Used Space 687 GB (73%)
       Free Space 244 GB (27%)
-SanDisk SDSA5GK-016G-1006
     Manufacturer SanDisk
     Heads 16
     Cylinders 1,946
     Tracks 496,230
     Sectors 31,262,490
     SATA type SATA-III 6.0Gb/s
     Device type Fixed
     ATA Standard ACS2
     Serial Number 124370401347
     Firmware Version Number CS.54.06
     LBA Size 48-bit LBA
     Power On Count 2141 times
     Power On Time 62.4 days
     Speed Not used (SSD Drive)
     Features S.M.A.R.T., APM, NCQ, TRIM, SSD
     Max. Transfer Mode SATA III 6.0Gb/s
     Used Transfer Mode SATA II 3.0Gb/s
     Interface SATA
     Capacity 14.9 GB
     Real size 16,013,942,784 bytes
     RAID Type None
      S.M.A.R.T
       Status Good
        S.M.A.R.T attributes
      Partition 0
       Partition ID Disk #2, Partition #0
       Size 14.9 GB

Hello @JoBla,
Thank you for the information, and welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how you are wondering if your desktop computer's hard disk is caching is being used, and I would be happy to assist you in this matter!
For caching on your computer, you will have needed to install one of the following drives:
1 TB, 7200 rpm, SATA
2 TB, 7200 rpm, SATA
3 TB, 7200 rpm, SATA
1 TB, 7200 rpm, SATA + 16 GB Disk Caching Solid State Drive
2 TB, 7200 rpm, SATA + 16 GB Disk Caching Solid State Drive
3 TB, 7200 rpm, SATA + 16 GB Disk Caching Solid State Drive
128 GB SATA Solid State Drive
256 GB SATA Solid State Drive
It is likely that this caching drive will be shown in Disk Management, which can be accessed by following this document on Partitioning and Naming Drives (Windows 8). It is important to note that an mSATA drive will not be visible in Windows, if you have one installed. You will also need to have Intel RST software installed.
I hope this helps!
Best Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

I use to administrate my DSL modem via an ip-address. When I enter it into FF8 I am asked where to save the file. Why and how can I prevent FF8 from doing that?

I use to administrate my DSL modem via an ip-address. When I enter it into FF8 I am asked where to save the file. Why and how can I prevent FF8 from doing that?
And now anytime I am entering an ip-address I am asked if I want to download the file.

It happens when the modem server doesn't send the file as text/html, but with another MIME type.<br />
I tried the index.html addition in case the server might send that file as text/html.<br />
If your DSL modem has a support website then you can try to ask there for advice about how to configure the modem server.

How can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,-

how can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,…"

It sounds like if you open Preferences in Word there will be a place where you can specify where to store autorecover files. Right now it sounds like it's pointing to somewhere that doesn't exist.

I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?

I think I have it working on my iPhone 5. But, I do not see how I can control the exit point that I would like for the VPN. Are all the exit points shown in the VPN setting now going to work with Open VPN, or do they remain PPTP? If I am reading correctly, they look like they remain PPTP. If I cannot control the exit point for open VPN, which exit point is the default in the profile you provided me?I note that Open VPN Connect does not work with any of the new 64 bit devices like the iPhone 5S, the iPad Air, and the new iPad MIni. Is there any chance that you guys will come up with an update for your app so that open VPN can be made to work on all iOS devices? That would be nice, particularly if the Open VPN Connect app does not give me a choice of exit points.Thanks,
I do not see where to enter IP addresses in the Open VPN setup. Also, how can I set it up so that I can choose different servers in the same way as I can currently choose them with my VPN app but for PPTP?
Just a quick note to tell you that Open VPN has updated their app so that it is compatible with 64 bit ARM devices like the iPhone 5S, the iPad Air, and the iPad Mini Retina.That does not resolve the problem of how to easily choose among the various possibilities for the exit server. We need to find an easy way to choose.

Thank you for trying the new Firefox. I'm sorry that you’re unhappy with the new design.
I understand your frustration and surprise at the removal of these features but I can't undo these changes. I'm just a support volunteer and I do not work for Mozilla. But you can send any feedback about these changes to http://input.mozilla.org/feedback. Firefox developers collect data submitted through there then present it at the weekly Firefox meeting
I recommend you try to adjust to 29 and see if you can't make it work for you before you downgrade to a less secure and soon outdated version of Firefox.
Here are a few suggestions for restoring the old design. I hope you’ll find one that works for you:
*Use the [https://addons.mozilla.org/en-US/firefox/addon/classicthemerestorer/ Classic Theme Restorer] to bring back the old design. Learn more here: [[How to make the new Firefox look like the old Firefox]]
*Use the [https://addons.mozilla.org/en-US/firefox/addon/the-addon-bar/ Add-on Bar Restored] to bring back the add-on bar. Learn more here: [[What happened to the Add-on Bar?]]

How can I fully administrate a TC that is being used by multiple users

Similar Messages

Maybe you are looking for