How can I generate IDOC(WPUUMS) from XML file in POSDM or in SAP Retail

Hallo Retail expert,
I have following scenario,
I have Retail Store who send me their daily sales report through Wincor Nixdorf Point of sale. There i am using standard POSLOG2 to SEEBURGER(its a middleware which act as Converter) xml format and then i post that data first in POSDM and then with BAPI i transfer or book that data to SAP Retail.
Above is the one scenario which is working.
This is the Second scenario.......
I have some external Retail store, they dont have Wincor Nixdorf POS, so they send me their Sales Report through SEEBURGER(its a middle Hardware which act as Converter) and SEEBURGER Convert that Sales data to XML format. My question is....
How can i upload or Convert a XML File into IDOC (WPUUMS)in SAP or in POSDM?
any new suggestion are welcome.
Thank you all in advance.
regards,
Niel

Hi,
1. To get the required XML Schema, use transaction code WE60 to go to the IDoc documentation -> enter the IDoc type you want to use (WPUUMS01). Flag control and data record. Then display the XSD by choosing Documentation -> XML Schema from the menue bar. Now you can donwload the XSD for usage in Seeburger.
2. Create your mapping from the POS format into the IDoc XML format in Seeburger.
3. Create an XML File Port in ERP or POS DM using transaction code WE21.
3. To inbound the XML file from Seeburger into POS DM or SAP Retail Seeburger should trigger the function module EDI_DATA_INCOMING. Parameters for this FM are the Pathname to the XML file and the Portname you just created. Based on the port name the FM can derive the port type xml and the data will be handled as XML data.
Regards Carsten

Similar Messages

How can I set button colors from xml file data?

I am reading an xml file to create a group of buttons. I am
also using repeater to create the group of buttons.
I am getting the buttons created, but am unable to set the
fill color properly. I keep getting the error "Implicit coercion of
a value of type String to an unrelated type Array" if I try to plug
in r.currentItem.value, even when I used an Actionscript function
to convert from a String to an array of 2 uints. Is there a simple
type casting solution to this I'm just not getting?
Any help would be greatly appreciated!
The xml file has the following format:
<colors>
<color>
<name>Canteloupe</name>
<value>0xFFCC66</value>
</color>
<color>
<name>Banana</name>
<value>0xFFFF66</value>
</color>
<color>
<name>Lemon</name>
<value>0xFFFF00</value>
</color>
<color>
<name>Honeydew</name>
<value>0xCCFF66</value>
</color>
</colors>
The code I have so far is:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
initialize="colors.send()" layout="absolute">
<mx:HTTPService id="colors"
url="assets/colors_standard.xml" resultFormat="e4x"/>
<mx:XMLListCollection id="xlc_colors"
source="{colors.lastResult.color}"/>
<mx:TabNavigator left="0" top="0" right="0"
bottom="0">
<mx:Canvas label="Tab 1" width="100%" height="100%">
<mx:Accordion width="200" left="0" top="0" bottom="0">
<mx:Canvas label="Colors" width="100%" height="100%">
<mx:Label text="Current Color Selection" left="10"
right="10" top="10" height="20" fontWeight="bold"/>
<mx:Button label="Update Colors" left="10" right="10"
top="227" height="22" id="button_colors_update"/>
<mx:Canvas height="189" left="10" right="10" top="30"
borderStyle="outset" backgroundColor="#e9e9e9">
<mx:Tile id="tile_standard" direction="horizontal"
tileWidth="25" tileHeight="25" horizontalAlign="center"
verticalAlign="middle" borderStyle="outset" left="10" right="10"
top="10" height="134" backgroundColor="#ffffff">
<mx:Repeater id="r" dataProvider="{xlc_colors}">
<mx:Button toolTip="{r.currentItem.name}" height="15"
width="15" x="10" y="10"/>
</mx:Repeater>
</mx:Tile>
<mx:Button label="Additional Colors"
id="button_colors_online" height="22" left="10" right="10"
bottom="10"/>
</mx:Canvas>
</mx:Canvas>
</mx:Accordion>
</mx:Canvas>
</mx:TabNavigator>
</mx:Application>

Thanks atta707!
If I send an array of 2 uints via a function call that
converts from String to Number to uint in an Actionscript function
and try to feed that into fillColors via:
<mx:Script>
<![CDATA[
public function fillcolors (_colorvalue:String):uint {
return uint(Number(_colorvalue));
]]>
</mx:Script>
<mx:Button height="15" width="15"
toolTip="{r.currentItem.name}" x="10" y="10"
fillColors="[fillcolors({r.currentItem.value}),fillcolors({r.currentItem.value})]"
I still get the "Implicit coercion of a value of type String
to an unrelated type Array." on the line that creates the button. I
have tried returning an Array of two uints with the Actionscript
funtion and get the same result.
<mx:Script>
<![CDATA[
public function fillcolors (_colorvalue:String):Array {
return new Array(uint(Number(_colorvalue)),
uint(Number(_colorvalue)));
]]>
</mx:Script>
<mx:Button toolTip="{r.currentItem.name}" height="15"
width="15" x="10" y="10"
fillColors="[fillcolors({r.currentItem.value})]"/>
Am I mistaken in my conversion of r.currentItem.value to
fillColors as arguments? Sorry about the newbie question - the
error I get makes me think it is a type conversion issue, but I
can't seem to get this to work/compile. If fillColors is expecting
an Array, should the Actionscript function returning an Array at
least get this to compile?

How can I generate and/or retrieve log files from iPad

How can I generate and/or retrieve log files from iPad?
OBS!
There are NO files apearing in ~/Library/Logs/CrashReporter/MobileDevice/<name of iPad> so where else can i find it?
I want to force it to produce a log, or find it within the iPad.
It is needed for support of an app.

Not sure on porting out the log data, but you can find it under General->About->Diagnostic&Usage->Diagnostic&Usage Data. It will give you a list of your log data, and you can get additional details by selecting the applicable log you are looking for. Hope this helps.

How can I script moving paths from one file to another?

Hello. I have 1 image with various color correction layers. The other is the exact same size but only contains paths. How can I script moving paths from one file to another? Thanks, in advance, for any help you can offer. Thanks!

Thanks! This one actually worked for me. Thanks for your help.
http://forums.adobe.com/message/3305389#3305389

How can I remove one page from adobe file

How can I remove one page from adobe file, when I try to remove the page a dialgue box say "some pages are being used, so they can not be ereased"?

Tools>Pages>Delete pages

How Can I Attach and Link an XML file to a 3D Model in a PDF?

How Can I Attach and Link an XML file to a 3D Model in a PDF?
What I am trying to do is find out how to have a 3D model and a parts list linked to it within the PDF file. I would also like to be able to add to the parts list if at all possible once the pdf has been created. A template to create future PDF's with the 3D model and list might also be useful.
I am not entirely sure if this is all possible within a PDF file, but I have viewed a PDF (Adidas Trainer) example which has a Excel file attached to it which links to the 3D model. I have also had a look at partner products such as Lattice, Tetra4D, Anark, which can do animations and all sorts, but frankly it seems a bit overkill for what I am looking to do.
Please, any help would be appreciated. Thanks

AlliCT59 wrote:
> Shared Object sounds like it would work, but hten agian,
I'm really stuck!
>
> Thanks for any help.
>
> Allison
I wrote about it while ago, let me paste the whole thing.
This example has simple
buttons which upon click go to new sites and in the same time
place record in form
of *.SOL file on user drive. That record is read when you hit
the next button and
based on that the button will be selected as the one last
clicked.
You could use the very same thing just instead of suppressing
button simply gotoAndPlay frame
to continue the part you need.
http://groups.google.com/group/macromedia.flash.actionscript/browse_thread/thread/36649453 1f4fd02d/245a57d0cdaa1d29?lnk=st&q=&rnum=3&hl=en#245a57d0cdaa1d29
The source is in a different place, i re-upload for you :
http://www.flashfugitive.com/stuff/SharedObj_urlcheck/
fla file
http://www.flashfugitive.com/stuff/SharedObj_urlcheck/beentourl.fla
Best Regards
Urami
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

How can I generate my own InDesign ePub file without the encryption.xml file?

My bookstore (B&N) will not accept my ePub file because it doesn't want the file encryption.xml included. How can I generate an InDesign ePub file, for my own books, without it? Is there a check box somewhere? I've searched through the ePub export box and the file info boxes—no luck.
Error message from B&N's PubIt.com:
We have found a file name called encryption.xml within your ePub file container, which means that part of, or all of, your file is encrypted. We do not accept any encryptions within ePub source files. Upon closing this message, please remove the encryption.xml file from your ePub, and you may attempt to upload your ePub file again.
If you wish to apply DRM to your title, go to Section 4, question H and select Yes. PubIt! will apply DRM to your title after you have uploaded your ePub file without encryption.
Thanks for your help…

Unfortunately you will find the option to uncheck "Embeddable Fonts" within ID CC 2014 only if you are creating an ePub with reflowable layout, but not if you are creating a "fixed layout" ePub.
I went with the suggestion of the eCanCrusher and was pleasantly surprised how easy to use this free tool is. You basically just drag your ePub over the icon of the App and it creates a folder in which you find the encryption.xml within the META-INF folder. Once you erased it you drag the folder over the icon of the App and through this you will get a new encryption-free ePub which now passes iTunes Connect Book Proofer test.
But then - opening the ePub without it's encryption within iBooks (on ipad) the text has moved, spaces between words are gone for no reason, words are even sticking into each other - it looks unacceptable! It does look OK on the iBook desktop app, however.
My solution was to change the font from Myriad to Verdana. I had changed the fonts before, because - whatever font I had used - it's reproduction on the ipad was messed up, and Myriad was the first one that I tried that looked alright, though, not so much after removing the encryption.xml. Unfortunately everything changes when you change fonts within a fixed layout ePub and all line breaks have to be revised now...
I also tried to remove the embedded fonts from inside the ePub, like someone else suggested, but that didn't help with the Book Proofer. It's really the encryption.xml that needs to be removed.
I wish that I now finally can submit successfully to Apple and wish that Adobe would have a better relationship with Apple to solve issues like that.

How can I generate SSL Keys from a Oracle 9iAS server version 1.0.2.2.0

How can I generate SSL Keys for use on Oracle 9iAS server
version 1.0.2.2.0. I have tried using the open_ssl method but
was unsuccessful.

<?xml version="1.0" encoding="UTF-8" ?>
<nodes>
<node>
<category_id>3</category_id>
<parent_id>2</parent_id>
<name>Mobile</name>
<is_active>1</is_active>
<position>1</position>
<level>2</level>
<children>
<node name="Nokia" category_id="6" parent_id="3" is_active="1" position="1" level="3">
<node name="Nokia N79" category_id="7" parent_id="3" is_active="1" position="2" level="3" />
<node name="Nokia N95" category_id="7" parent_id="3" is_active="1" position="2" level="3" />
<node name="Nokia N97" category_id="7" parent_id="3" is_active="1" position="2" level="3" />
</node>
<node name="Samsung" category_id="7" parent_id="3" is_active="1" position="2" level="3">
</node>
</children>
</node>
<node>
<category_id>4</category_id>
<parent_id>2</parent_id>
<name>Laptop</name>
<is_active>1</is_active>
<position>2</position>
<level>2</level>
<children></children>
</node>
<node>
<category_id>5</category_id>
<parent_id>2</parent_id>
<name>Monitor</name>
<is_active>1</is_active>
<position>3</position>
<level>2</level>
<children></children>
</node>
<node>
<category_id>8</category_id>
<parent_id>2</parent_id>
<name>Camera</name>
<is_active>1</is_active>
<position>4</position>
<level>2</level>
<children></children>
</node>
</nodes>
Is this correct format to create dynamic menu?

How can I use a photo from my files as a screen saver?

I have an LG monitor about 10" high and 16" wide. How can I send a photo from my Adobe files to my desktop as a screen saver. Because of the odd dimensions of this monitor, the one I have as a screensaver now does not show the entire photo. I need instructions how to choose one of my photos, send it to the monitor as a screen saver, and make it the correct size to show the entire photo.

You'll need to download the song from your cd to your my music folder, then open Itunes files add files or folder to the library then you find your song from your my music folder. Then you will have to create the ringtone:
http://http://www.ehow.com/how_2160460_custom-iphone-ringtones-free.html
follow the instruction to create then sync the ringtones.

How can i cut the audio from 1 file and put it on another?

I have these2 files of the same movie, 1 is amazing quality but theres no audio. the other is crummy quality but has perfect audio. How can I cut the audio from the good audio version and paste it onto the good video file?
btw i have quicktime pro is that changes anything

Open the movie and press "Command J". This will bring up the properties window. Click on the Audio Track or Video Track and the "Extract/Delete" buttons will light up. Click "Delete" and it'll delete the currently selected track, click "Extract" and it will extract the selected track into a new movie. Just use Delete on the correct track and you're halfway there.
Then, select the movie that is just an Audio Track now, do "Command A" then "Command C" to copy the audio track. Go to the movie that's just a video track, move the insertion point to the beginning of the video then do "Option Command V" to add the Audio Track to the Video Track side by side.

How to delete a perticular node from xml file using java code

Hii All,
Now i am trying to delete a perticular node from xml file.Like...
XML file:
<Licence>
<SERVER>
<was id="1">1</was>
<was id="2">2</was>
</SERVER>
</LICENCE>
I am working in messaging service using JABBER framework with whiteboard facility.
Here Some commands i have created to add,modify,delete nodes from xml file.They Are
1.If u want to add a new node then.
create Licence.SERVER <ss id="3">ddd</ss> lic.xml
(here u want to add a new node called "ss" under Licence.SERVER.
And lic.xml is tyhe xml file name where it was saved.
2.If u want to delete a node(Suppose <was id="1">),then the command should be
delete Licence.SERVER.was:id='"1" lic.xml
A problem arises that here it find two was attributes.And it delete the last was attribute,not the requested node.
PLEASE HELP ME IN SOLVING THIS CODE..
------------------------------------

Looks like you clicked on "Post" before you pasted in the code you were talking about.

How to generate Java objects from XML files with out scema compilation

Dear participants,
My name is Raghavendra , i have a requirement of reading XML files Dynamically and parse them and create java types for manipulation . i will not be provided with sxd files (no schema compilation )coz no one knows how many types of structures are there. i want a generic solution. Please Help.
Thanks ,
Raghavendra Ach
you can mail me to " [email protected]"

georgemc wrote:
You could also look at something like Apache Digester, which will parse your XML and populate Java objects with the data. A slightly steeper learning curve than the lower-level APIs such as JDOM, but that's outweighed by the lesser development effortdon't think that would work for the original problem, which seemed to indicate that the xml had an unknown structure.

How to parse and retrieve records from xml files into columns in Table

Hi
I attached the thing what i tried.
Table to hold the XML COntent:
create table xmlfile(xml_con sys.xmltype);
Inserting Xml file content into the Above table:
insert into xmlfile values(sys.xmltype.CreateXml('<Root><name>RAM</name><age>23</age></Root>'))
SQL> select * from xmlfile;
XML_CON
<Root>
<name>RAM</name>
<age>23</age>
</Root>
SQL> select extractValue(xml_con, '/Root/name') content from xmlfile;
CONTENT
RAM
This one works fine
But if the file content is as below( contains MUltiple Records)
insert into xmlfile values(sys.xmltype.CreateXml('<Root><Record><name>RAM</name><age>23</age></Record><Record><name>SAM</name><age>23</age></Record></Root>'))
SQL> select extractValue(xml_con, '/Root/Record/name') content from xmlfile;
ERROR at line 1:
ORA-19025: EXTRACTVALUE returns value of only one node
Can anyone help me 4 this issue-How to extract multiple records from the XML file inthis manner(from PL/SQL without using JAVA)
OR
If there is anyother way to do this please tell me?

SQL> SELECT EXTRACTVALUE (COLUMN_VALUE, '//name') NAME,
 EXTRACTVALUE (COLUMN_VALUE, '//age') age
FROM TABLE
 (XMLSEQUENCE
 (EXTRACT
 (XMLTYPE
 ('<Root>
 <Record>
 <name>RAM</name>
 <age>23</age>
 </Record>
 <Record>
 <name>SAM</name>
 <age>23</age>
 </Record>
 </Root>'
 '/Root/Record'
NAME AGE
RAM 23
SAM 23
2 rows selected.

How can i get all links from html file ?

I tried some code:
List<string> metas = new List<string>();
string text = "";
string mys = "";
public List<string> LockedThreads(string filename)
HtmlWeb web = new HtmlWeb();
HtmlAgilityPack.HtmlDocument doc = new HtmlAgilityPack.HtmlDocument();
doc.Load(filename, Encoding.UTF8);
var metaTags = doc.DocumentNode.SelectNodes("//meta");
if (metaTags != null)
foreach (var tag in metaTags)
if (tag.Attributes["name"] != null && tag.Attributes["content"] != null)
text = tag.Attributes["name"].Value;
mys = tag.Attributes["content"].Value;
var linksOnPage = from lnks in doc.DocumentNode.Descendants()
where lnks.Name == "a" &&
lnks.Attributes["href"] != null &&
lnks.InnerText.Trim().Length > 0
select new
Url = lnks.Attributes["href"].Value,
Text = lnks.InnerText
foreach (HtmlNode node in doc.DocumentNode
.SelectNodes("//a/@href | //img/@src"))
metas.Add(node.Name);
In the var linksOnPage i'm getting all the links but some of them not only links for example the first item i see:
[0] = { Url = "/", Text = "    " }
Then the second item:
[1] = { Url = "http://rotter.net/cgi-bin/forum/dcboard.cgi?az=login", Text = "התחבר" }
Next i want to add another loop or variable that will contain only the links after im src for example:
<img
src="http://mysite.com"
border="0"></a></TD><TD
ALIGN="right"
VALIGN="TOP"
WIDTH="55%">
So to get only http://mysite.com
So in the end i will have two Lists:
First List will contain all links from the html file.
Second List only links that are in img src

Ok i'm using regex now and i can get the links i need:
List<string> metas = new List<string>();
List<string> metas1 = new List<string>();
string text = "";
string mys = "";
public List<string> LockedThreads(string filename)
string[] fall = File.ReadAllLines(filename);
foreach (string hh in fall)
if (hh.Contains("http://rotter.net") && hh.Contains("locked")||
hh.Contains("locked_icon_general") ||
hh.Contains("locked_icon_anchor") ||
hh.Contains("icon_anchor") ||
hh.Contains("locked_icon_fire") ||
hh.Contains("locked_icon_sport")||
hh.Contains("locked_icon_camera")||
hh.Contains("locked_icon_movie"))
Regex linkParser = new Regex(@"\b(?:https?://|www\.)\S+\b", RegexOptions.Compiled | RegexOptions.IgnoreCase);
foreach (Match m in linkParser.Matches(hh))
metas.Add(m.Value);
So now in the metas i have in this case two links.
For example the first link is from this block in the file:
The link i got is : http://rotter.net/forum/Images/hot_icon_anchor.gif
And this is the right link from this block but now how do i get the text from this block and how i connect how do i know that this text belong to the link ? I need to add this text from this block to a new List. Before all that i counted on my own lines
and got the text but that's a bad idea.
I need somehow to get: שרשור תשדירי בחירות מרוכז:
To get the text between the ToolTip',' and the second ',' but not from all the html file only in places of this two links i extracted.
<TD ALIGN="RIGHT"
VALIGN="TOP">
<body onmousemove="overhere()">
<a onmouseover="EnterContent('ToolTip','שרשור תשדירי בחירות מרוכז:','כתב: menahem בתאריך: 03.03.15
שעה: 08:51 1. http://youtu.be/utUaqyiRkJ8 ...'); Activate();"
onmouseout="deActivate()"
href="javascript:void(0)">
<img src="http://rotter.net/forum/Images/hot_icon_anchor.gif"
border="0"></a></TD><TD
ALIGN="right"
VALIGN="TOP"
WIDTH="55%">

<a href="http://rotter.net/cgi-bin/forum/dcboard.cgi?az=read_count&om=187966&forum=scoops1">
שרשור תשדירי בחירות מרוכז:
</a></TD>

How can I set connection to external XML file with Dreamweaver to buiild AIR app?

Hello,
I try to do simple AIR app in dreamweaver. It's not problem
to use static data. But I'd like to use dynamic data from external
XML file. I try to use Spry and evrything works fine in web browser
but i have problem with loading external XML data into my app in
AIR. Can I simply transform my spry based html app into AIR?
What should I add to do this?
Pawel

Daniel Lichtenwald wrote:
What are the requirements and steps for arranging to receive this large file using File Transfer Protocol (FTP)?
Usually, we don't speak of "receive" when using FTP, since the file is transferred from server to client, so it's more of a case of "download".
At your end, it's simple. You use an FTP client; under SL, that includes Finder and Safari, so you don't even need to get any additional software.
At the other end, it's more complicated; the 'sender' must set up an FTP server on his machine.
Alternatively, you can set up your own Mac as an FTP server, and have the 'sender' connect to you with an FTP client and upload the file; but, if your Mac lives behind a router, then you have more work to do with the router settings.
That's why it's much easier to use the file sharing services mentioned above -- if they are available in both sender's and receiver's locations. (Keep in mind that some countries block access to all those mentioned -- except perhaps <www.transfer.ro>, of which I know absolutely nothing.)

How can I generate IDOC(WPUUMS) from XML file in POSDM or in SAP Retail

Similar Messages

Maybe you are looking for