How can I generate superimposed pictures

Can someone help?
I have got this action script 2 working fine:
function loadslide(id) {
var fadeSlideOut:Tween
= new Tween(target_mc, "_alpha", Regular.easeOut,
target_mc._alpha, 0, fadeOutSpeed, true);
fadeSlideOut.onMotionFinished = function() {
loadMovie(slide_BGasset[id], target_mc);
var fadetargetIn:Tween = new Tween(target_mc, "_alpha",
Regular.easeOut, 0, 100, fadeInSpeed, true);
It loads a jpg-image via slide_BGasset[id] into target_mc.
Now, if I want to superimpose slide_BGasset[id] with a second
jpg-picture slide_asset[id] within the same target_mc, how can I do
that in action script 2?
Thanks :-)

I tried before to duplicate target_mc to a target1_mc and a
target2_mc. But that one drove me nuts because I could create them,
yes, but they were not working. Just not appearing on the screen.
(?) What did I do wrong with that?
Thanks

Similar Messages

How can I make multiple pictures slowly fade to white in FCP X ?

I am new to FCP X and I'm creating a picture slideshow. How can I make multiple pictures slowly fade to white in FCP X ?
For example, I would like to have 10 pictures all play in 5 seconds, and starting off with the 1st one being little light; 2nd lighter; 3rd lightter; etc., to 10th being completly white screen...
Can anyone help ?

Here is what I would do. Add a 5 second white generator solid to your storyline. Add your 10 half second clips as attached clips. Select them all, right click and make a compound clip. Then keyframe the compound clips opacity from 100% t0 0% with one keyframe at the beginning and one at the end. That will give you a linear reduction in opacity over the 5 seconds(10 pics). You can play with the keyframes to get the effect you want if linear isn't doing it.

How can I Generate two different reports from single execution of Test cases in NI teststand

Hi,
My requirement is to generate two different reports from NI teststand. One for the Logging of error descriptions and the other report is by default generated by the Teststand. How can i generate a txt file that contains error descriptions other than that mentioned in the default report?
Solved!
Go to Solution.

Do you need to do that just for these two sequences but not for other sequences? I don't see a problem to use SequenceFilePostStepRuntimeError. Create this callback in both sequence files and configure them to log into the same file. SequenceFilePostStepRuntimeError callback is called after each step of the sequence file if it has runtime error. You can access the calling step error information via RunState.Caller.Step.Result.Error property. Take a look to attached example.
The "other way" is useful if you need to log errors not for every step of the sequence file, but for some of them. This is more complex, because you need to create a custom step types for these steps. For the custom step you can create substeps (post-step in your case) which will be executed every time after step of this type executed. Then, this is you job to determine if error happened in the step, acces to step's error information is via Step.Result.Error property.
Also, be aware that step's post-expression is not executed in case of error in the step.
Sergey Kolbunov
CLA, CTD
Attachments:
SequenceFilePostStepRuntimeError_Demo.seq ‏7 KB

I recently upgraded to Yosemite 10.10.2 and Aperture 2.1.4 will no longer open. I cannot access my photos and I don't want to pay for latest version of Aperture since this application is no longer going to be supported. How can I get my pictures?

I recently upgraded to Yosemite 10.10.2 and Aperture 2.1.4 will no longer open. I cannot access my photos and I don't want to pay for latest version of Aperture since this application is no longer going to be supported. How can I get my pictures?

If you want just the originals, then you can go into the Aperture library (right click on it and do "show package contents"). Inside is a directory called "Masters" and you can find the original files in a bunch of subfolders.
But... you'll lose all adjustments, keywords, and other information, and just have the files as they were imported originally from the cameras.
Easiest is probably to buy Aperture and update everything, and then migrate to the Photos application down the road if that's what you want. Aperture 3.0 came out in 2010 (five years ago!) so it's not like you've upgraded in a while

How can I view my pictures that were backed up to iTunes? I no longer have an apple product but need to view the pictures for very important reasons.

How can I view my pictures that were backed up to iTunes? I no longer have an apple product but need to view the pictures for very important reasons.

If you mean backed up as part of an iPhone backup in iTunes? If so, you would have to use 3rd party software to extract them from the backup, such as iPhone Backup Extractor.

How can I connect one picture to another picture?

How can I connect three pictures?

Hi, and welcome to the forum.
Do you want to join the edges of three pictures, like you might when joining three images of a landscape into a panorama?
Or do you want to take elements from three images and combine them into one image?

How can I attach a picture to an email in file format not as a picture

how can I attach a picture to an email in file format,

Please pardon the intrusion…
Hi, Leroy!
Congratulations on advancing to Level 6!
At the Water Cooler in the Level 6+ Lounge, we are throwing virtual confetti in celebration of your attainment of Level 6-dom. Would you care to join us at the Water Cooler?
Towards the bottom of the index on the Apple Support Communities Home Page you soon will find the Lounge link available to you. It should work for you within the next 24 hours if all goes as it should.
Hope to see you there soon!

I have an Olympus E620 and have bought an IPad 4th Generation. How can I transfer my pictures from the camera to the IPad?. My camera does not take SD cards.

I have an Olymput E620 and iPad 4th generation, how can I download the pictures off the camera to the iPad?
The only cable I can find with lightning and usb is the apple camera adaptor but it is £25 from Apple which is a bit expensive if it will not work. Some peoples reviews seem to say this will not work, I can not use the camera reader by Apple as this only takes SD cards and my camera takes XD and compact flash cards. I have realised that you cannot use this cable on a card reader which is a shame and means taking more cables on holiday with you and more likely to get lost. This is so frustrating as one of the reasons of buying the iPad was to use, to transport photos whilst away instead of having lots of cards which do get lost and damaged. I hope someone can help as there seems to be a lot of confusion as to what works in cases like this.

go to start - computer - right click on ipod and import pics.
Peace, Clyde

How can I convert a picture in PDF format to Excel?

How can I convert a picture (layout of floor plan) into Excel?

This article shows how to disable OCR during the conversion: https://forums.adobe.com/docs/DOC-3062 - do the opposite to enable it.

How can I send multiple pictures to the Kodak link (under file & then order prints)? if the photos are not sequential can it be done?

how can I send multiple pictures to the Kodak link (under file & then order prints)? if the photos are not sequential can it be done?

Does the order matter here?Because the photos will be sent for printing. If there is any other reason, can you please cite example.

My ipod touch won't respond. Shortly after I downloaded IOS 8, it quite responding. How can I get my pictures recovered?

My ipod touch won't respond. Shortly after I downloaded IOS 8, it quite responding. All I get is the Apple sign. I connected to my computer and tried updating and was able to download the USB connection for the device but received an error when it tried to update the ipod. Is there any way to retrieve my pictures from the device before I try to recover? At this point my pictures are more valuable to me than restoring the device. How can I get my pictures recovered?
Now it looks like I have the Apple with an line under it on the screen, but still not responsive.

Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

How can I get a picture to go with my email signature when sending emails from my iPad? Only a square box shows up on my signature not the actual picture I iploaded in my settings.

How can I get a picture to go with my email signature when sending emails from my iPad? Only a square box shows up on my signature not the actual picture I iploaded in my settings.

Only Apple Account Security could help at this point. You can try calling Apple Support in Canada - you'll have to find one of the several ways, such as Skype, to call an 800 number from outside of the relevant country - and ask for Account Security and see if they can help. Or you can find a friend who speaks Chinese and ask them to help you talk to Apple Support in China. There are really no other options that I know of.
Note, by the way, that these are user-to-user support forums. You aren't speaking with Apple when you post here.
Regards.

How can I generate SSL Keys from a Oracle 9iAS server version 1.0.2.2.0

How can I generate SSL Keys for use on Oracle 9iAS server
version 1.0.2.2.0. I have tried using the open_ssl method but
was unsuccessful.

<?xml version="1.0" encoding="UTF-8" ?>
<nodes>
<node>
<category_id>3</category_id>
<parent_id>2</parent_id>
<name>Mobile</name>
<is_active>1</is_active>
<position>1</position>
<level>2</level>
<children>
<node name="Nokia" category_id="6" parent_id="3" is_active="1" position="1" level="3">
<node name="Nokia N79" category_id="7" parent_id="3" is_active="1" position="2" level="3" />
<node name="Nokia N95" category_id="7" parent_id="3" is_active="1" position="2" level="3" />
<node name="Nokia N97" category_id="7" parent_id="3" is_active="1" position="2" level="3" />
</node>
<node name="Samsung" category_id="7" parent_id="3" is_active="1" position="2" level="3">
</node>
</children>
</node>
<node>
<category_id>4</category_id>
<parent_id>2</parent_id>
<name>Laptop</name>
<is_active>1</is_active>
<position>2</position>
<level>2</level>
<children></children>
</node>
<node>
<category_id>5</category_id>
<parent_id>2</parent_id>
<name>Monitor</name>
<is_active>1</is_active>
<position>3</position>
<level>2</level>
<children></children>
</node>
<node>
<category_id>8</category_id>
<parent_id>2</parent_id>
<name>Camera</name>
<is_active>1</is_active>
<position>4</position>
<level>2</level>
<children></children>
</node>
</nodes>
Is this correct format to create dynamic menu?

How can I set my pictures in a order I want ? (On my iPad)

How can I set my pictures in a order I want ? (On my iPad)

HI friend open your desired album and see on the right side corner a button which says select press the button select and then press select the picture you want to move. A tick mark appears on the photo. Touch and hold the photo again for sometime and your finger can move the photo and can be dragged to your desired order. Did I clear your doubt. Fredy.

How can I export aperture pictures to a new library?

How can I export aperture pictures to a new library? I wan to create a new aperture library at an exernal drive so that I can reduce the size of the current library in the internal drive. Thank you for letting me know.

"File➞Export➞ ... as new Library " will create a new Library from the selection.
The preferred method for making the Library on your system drive smaller is to change some of the Image's Originals from Managed (= stored inside the Library) to Referenced (= stored outside the Library, often on external drives). There are so many advantages to this that it can be recommended without question. Unless you have specific reasons for splitting your Library into two Libraries (security concerns are one of the very few reasons), you should keep your Library on your system drive with some Image's Originals Managed, and the rest Referenced to an external drive.
Read up about these options in the User Manual (scroll down).

How can I generate superimposed pictures

Similar Messages

Maybe you are looking for