HOW CAN I GET A DIFFERENT STATE WHEN CREATE THE VM

All i Always get is
Country
United States (US)
Region Washington (WA)
City Redmond
ZIP code
98052
What do i do to change the state ...Please help

Hi,
Would you be able to provide us details as to when you get State option while creating a VM?
Is the address you have mentioned your billing address? Does this come up in the Management portal or the Billing portal?
You could refer the following link to create a Windows VM in Azure:
http://azure.microsoft.com/en-us/documentation/articles/virtual-machines-create-custom/
If you notice in the article, when creating a VM in the Management Portal, it only prompts you for the region, affinity group or Virtual Network, as shown below.
Regards,
Malar.

Similar Messages

HT1349 How can i get into my iPad when i forgot my password?

How can i get into my ipad when i forgot my password?

If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.

How can I get my clock to remain on the correct time when starting bootcamp and windows XP? wireless option is not available.

How can I get my clock to remain on the correct time when starting bootcamp and windows XP? wireless option is not available.

Have a look at solutions in here https://discussions.apple.com/message/10689317#10689317
Regards
Stefan

I found out that I have some lost contacts on my iphone 5s, they dont appear when I search but if the contact calls me I see their name. How can I get those contacts to be on the list?

I found out that I have some lost contacts on my iphone 5s, they dont appear when I search but if the contact calls me I see their name. How can I get those contacts to be on the list?

You could check settings > mail contacts and calandars and see if there are any accounts (like icloud gmail yahoo) listed and if they have contacts on. Its possible if contacts were synced to one of these accounts that turning them back on will recover the missing contacts.

I have a Iphone4s and just brought a new Iphone 6 when I pluged the the new phone all my data wastransfered exepet for my ring tones all other info photos,music and contacts all downloaded ok but no ring tone how can i get them to come across to the

I have a Iphone4s and just brought a new Iphone 6 when I pluged the the new phone all my data wastransfered exepet for my ring tones all other info photos,music and contacts all downloaded ok but no ring tone how can i get them to come across to the new phone

This covers all the process
Transfer content from an iPhone, iPad, or iPod touch to a new device - Apple Support

How can i get itunes to quit skipping to the currently playing song when i'm working on the library somewhere else?

how can i get itunes to quit skipping to the currently playing song when i'm working on the library somewhere else?

You might be able to achieve what you want by using Party Shuffle. Set the source for Party Shuffle to be the playlist you want to listen to or add the tracks you want to listen to by control clicking on them and selecting Add to Party Shuffle. Once everything is in Party Shuffle, you can rearrange them to your satisfaction. As the songs are played, they'll roll off the queue. You can quit iTunes and even when you restart, all your songs will be there, in the order you want, waiting for you to hit play.

How can I get my iPhone ID when i dont have box, and it is not in "my products"

How can I get my iPhone ID when i dont have box, and it is not in "my products"? Please help. I lost my phone.

Here are the various ways:
http://support.apple.com/kb/ht4061
If you setup a support profile with Apple, you can also login to your support profile & find the SN listed there.

One laptop died. I have a new laptop now. How can I get my Ipod song list on the new laptop without downloading each c.d.?

My first laptop died. I have a new laptop now. How can I get my Ipod song list on the new laptop without downloading each c.d.?

See this older post from another forum member Zevoneer covering the different ways to copy content from your iPod to your PC.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

Hardware missing -AGP Graphics card. How can I get my FCE 4 working on the new computer? Cheers

Hi I have just upgraded my computer to Mac OSX 10.6.7 now I cant open my FCE 4. Message reads, Hardware missing -AGP Graphics card. How can I get my FCE 4 working on the new computer? Cheers

Thanks, just so I know we are talking about the same items please let me know - When you say "run Prokit" do you mean downloaded? Which I did. I dont have Prokit 4.0.1 if you are referring to that, do I need this first? Please explain what application name I am looking for if other than Prokit which is sitting in my "download folder" do I need to manually put it into the apps folder? Sorry if the questions are layman but this area is not a very strong point for me. Thanks for your help so far.

How can I get my iphone to stop losing the signal?

How can I get my iphone to stop losing the signal?

Thanks for the tip. If only I could find somewhere where I did not lose the signal.
I am based in the United Kingdom. The carrier is Orange.
I lose the signal inside buildings and outside of buildings. It happens at work and at home. It happens in Centarl London in the open air and inside. It happens in small towns.. It happens in the countryside. It happens in motor cars. It happens in airports. It happens when the battery is fully charged, when it is half charged and when it's low on charge. It happens using the phone, when reading messages and when using the internet.
Hope this helps.

What is NetAuthAgent and how can I get it to stop looking for the unnamed file?

Since the last Mountain Lion update on my MacBook Pro, I get this error message every few minutes:
   2013-12-16 1:19:04.338 PM NetAuthAgent[1739]:
      inErrorInfo = {
           AuthType = Server;
           ErrorNumber = 45;
           ErrorType = 4;
          Scheme = file;
How can I get it to stop looking for the unnamed file?
Kat Nagel

If streaming music when connected to your carrier's cellular network, it uses cellular data.
Only the music you purchased from the iTunes Store can be streamed unless you have purchased iTunes Match.
If there is a slow down at the server where the music is stored or high traffic, steaming can be paused. You can also download a song from the iTunes Store cloud to your iPhone so it doesn't need to be steamed.

How can I get my Aperture library back from the Photos application?

As stated above, How can I get my Aperture library back from the Photos application? I'm not a fan of Photos right now and haven't used iPhoto in years, so that wasn't a loss... I didn't realize when I gave Photo's access to my Aperture library, I was going to lose it...
I want to get it back, any suggestions?
Thanks again!
MacTeacherMN

what means ..."Once you open the Aperture library back into Aperture..."? What do I need to "klick" in order to getting back my old Aperture Project structure....

How can I get a count of objects in the near cache? (Extend client)

Hi,
I'm trying to figure out how to get the count of objects in my near cache (from c++ client). Knowing the size of the near cache is a key factor when optimizing configurations for performance.
However if I call size() on the cache handle I get the count of objects in the cache (ie the cluster). How can I get a count of objects in the near cache?
Thanks
Rich Carless

H Rich,
It may not be ideal, but I think you may be able to infer the size by using the HeapAnalyzer (http://download.oracle.com/docs/cd/E15357_01/coh.360/e15728/classcoherence_1_1lang_1_1_heap_analyzer.html) facility, specifically the "class" based HeapAnalyzer. Its Snapshot representation http://download.oracle.com/docs/cd/E15357_01/coh.360/e15728/classcoherence_1_1lang_1_1_class_based_heap_analyzer_1_1_snapshot.html provides a mapping between class name and ClassStats (http://download.oracle.com/docs/cd/E15357_01/coh.360/e15728/classcoherence_1_1lang_1_1_class_based_heap_analyzer_1_1_class_stats.html) which provides information on how many instances of a given class type are in memory. Note the reported counts are process wide but if your key or value type are distinct you may be able to infer your answer. I realize this is rather complex, my only other suggestion would be to just make some guesses on size and see how they effect performance.
Mark
Oracle Coherence

How can I get "IMAQ Line Fit" stable (with the same points)

How can I get "IMAQ Line Fit" stable (with the same points)
I my vision applications I use a lot off times "IMAQ Line Fit"
some times the results are not Stable.
See vi and word document attached.
When I take the same points but in a other order (sort)
then suddenly all points are used.
In this case I was looking for a edge in vertical direction (Y).
I found the points but "IMAQ Line Fit" did not function well.
I tried changing all settings like pixel radius and minimum score and
also threshold and so on. But no result.
Then I sorted the points reversed and that worked. See vi.
I use labview Labview 8.6.0 and IMAQ machine vision.
Maybe this problem is solved in a newer version.
Please let me know.
Thanks
Attachments:
TEST-imaq-line-fit-86.vi ‏169 KB
IMAQ-Fit-Line-Problem-86.doc ‏230 KB

Thank You for your reaction Hossein,
This "one application" uses "Line fit" about 20 000 000 times a day.
about 200 will go wrong. With your setting the the "Line fit" for this occasion will work but others will go wrong.
A algorithm should be:
1e Stable, when using the same points and settings the result MUST be the same. How the points are sorted should not matter.
2e Accuracy
3e Speed
4e Testing. Is very difficult but al least close points and the same points and sorting ... should be done
NI now as made a " IMAQ Line Fit" Problem CAR (Corrective Action request) 298016.
so in the future there will be a update.
In the mean while a made a line fit which uses Bisquare option from Linear Fit.vi :
from C:\Program Files\National Instruments\LabVIEW 8.6\vi.lib\analysis\6fits.llb
This is a temporary fix because "IMAQ Fit Line VI" is not so stable.
Because outliers should be rejected only Bisquare does this reasonable.
This program does NOT USE "Minimum Score" and "Pixel Radius"
Valid fit = When there are enough points within Outlier_Distance.
Algorithm steps:
- Determine if line is more horizontal then vertical, Compare DeltaX with DeltaY
- If DeltaX <= DeltaY then SWAP X Y and later Swap back
- Sort Points at on X value
- First : Bisquare Linear Fit
- Calculate distances to the found line for all points
- Inliers: Points within Outlier_distance
- Outliers: Points outside Outlier_Distance
- Only use Inlier Points
- Check again if DeltaX < DeltaY then SWAP X Y later SWAP back again
- Second : Bisquare Linear Fit only with the Inlier Points
- Results are from the second fit
Warning : This Program is Not so accurate and Not so fast
See attachments it is in labview 8.6
If some has a improvement please let me know.
Thanks
Attachments:
svi_fit_line_Bsquare_and_draw.vi ‏18 KB
Fit_Line_Bisquare_Linear.vi ‏40 KB

HOW CAN I GET A DESCRIPTION OF ALL OF THE FRATURES IN lION 10.7.4

How can I get a description of all of the programs that came with my mac pro without spending an arm and a leg?

This is a good place to start and follow the links to all the Mac 101 articles.
http://www.apple.com/support/mac101/
Regards,
Captfred

HOW CAN I GET A DIFFERENT STATE WHEN CREATE THE VM

Similar Messages

Maybe you are looking for