How can I get a E3000 or E4200 to manage more than 5 devices

How can I get a E3000 or E4200 to manage more than 5 devices? Come on Cisco, lets get real. EVERYONE has more than 5 devices to manage. The average family of 4 has 3 or 4 computers, 4 smart phones and at least a couple of tablets and maybe some TV or game consoles. Setting access control policies is a must for anyone who is a parent.
Does anyone know of a good router that has a reasonable set of access control features? I've always loved Cisco up to this point, but I'm frustrated by this significant limitation.

Fuggedaboutit. Cisco apparently has retreated from the more advanced Internet Access Policy (IAP) to leave users with their paltry Parental Controls (PC) instead. For example the E4200v1 had IAP+PC, and the E4200v2 has only PC.
And good luck trying to find a E4200v1. I spent the last week, ordered 3 of them from different sources, and every one of them was a V2 inside of a V1 box, even the last one I ordered directly from Linksys!
That's a very bizarre marketing scam they're pulling there. The sad thing is that I actually want to keep using their product line, but they are doing their best to push me away.
I too am now regrouping and looking for a competitor who does 2 things well:
(A) High performing dual-band wireless access point, w/ pswd-protected guest-mode
(B) Reliable & fairly full-featured Internet access control (parental control)
My basic requirements for "B" are:
(1) Allow restrictions by IP or better yet MAC address (Cisco PC's hostname list didn't work for me)
(2) Device list of at least 12 devices (obviously family size varies but Cisco's 5 is a joke)
(3) Restricty by days of week and time of day (hourly or half-hourly would be nice)
(4) Restrict by URL's and keywords, at least 12 per device or policy/rule
I wonder if there's a home router whose stock OS, meets these requirements. Otherwise I may have to look into using DD-WRT or similar.

Similar Messages

HT1203 Can I share one iTunes account for my iPad and two I phones? If so, how can I get the purchased apps and music on all three devices? Do I need a home computer,

Can I share one iTunes account for my iPad and two I phones? If so, how can I get the purchased apps and music on all three devices? How do I sync all the devices to have the same music and apps?

You can set up an iCloud account on each one (the SAME iCloud account using the same AppleID on each) and then sync via iCloud.
http://support.apple.com/kb/HT5262\
However, an iCloud backup nor sync contains purchased content - that is available for redownload from the iTunes and App stores (so no need to waste iCloud space storing it for you).
So, for purchased content, you will have to download it on each device - just use the same AppleID and download each item on each device.
Without a computer to aid the sync'ing, downloading the purchased content on each device is the only way.
P.S audiobooks cannot be re-downloaded once purchased (all other content can be), so without a computer to save, store and move the audiobook files around, you will only be able to put those on one device - the one you first purchase it on.

How can i use the same front panel graph in more than one events in an event structure?

i want to display the signals from my sensorDAQ in a graph.but i have more than one event in the event structure to acquire the signal and display it in the graph.the first event is to acquire the threshold signals and its displayed in the graph as a feedback.after the first event is executed, i will call the second event,where the further signals are acuired and compared with the threshold signals from the event 1.my question is how can i use the same front panel control in more than two events in the event structure?please answer me i'm stuck.
Solved!
Go to Solution.

Hi,
I have attached here an example of doing the same using shift registers and local variables. Take a look. Shift register is always a better option than local variables.
Regards,
Nitzz
(Give kudos to good answers, Mark it as a solution if your problem is Solved)
Attachments:
Graph and shift registers.vi ‏12 KB
graph and local variables.vi ‏12 KB

I would like to know how can I delete emails from my email block have more than 8000? Thank you.

I would like to know how can I delete emails from my email block have more than 8000? Thank you.

I want to say, delete the 8000 not one by one, or 50 in 50... Minimum of 200 by
200

How can I set up my mail page to show more than ten emails at a time?

How can I set up my mail page to show more than ten emails a time?
== This happened ==
Every time Firefox opened
== I first started using firefox

There doesn't seem to be a setting in preferences to how many emails I can view at one time.

How Can I get v1.52 of "ThinkPad Power Management driver for Windows"?

The subject says it all: How can I get v1.52 of the "ThinkPad Power Management driver for Windows Vista, XP, 2000, Me, 98 SE - ThinkPad" driver? Since installing v1.53 I've been experiencing screen issues (screen goes dark, and it's very hard to get the screen brightness back to normal) that seem to be tied to my T40p entering sleep mode / turning off the screen.
I want to see if reverting back to v1.52 fixes these problems.
Thanks,
RocketDude
RocketDude
T400s 2801-CTO

Nilst,
Issue has been escalated however currently pending the team to fix it. Will update once I have news from them.
*Non Lenovo employee*
I have a Y2P (i5) ... Feel free to ping me if you want me to test some applications with your Y2P if you have the same model. I don't mind keep doing recovery on it if needed .... =)

I have problem with my iphone 4s my battery is not keeping charge. how can I get help with this one. it is less than a year that I purchased this cell.

I have problem with my iphone 4s my battery is not keeping charge. how can I get help with this one? it is less than a year that I purchased this cell.

I would like to know the answer to that one. I realized this was happening just after upgradeing my iOS to 6. Then when I looked up my purchase date, I was about 5 days past my one year warranty. So I'm dead in the water. Apple will replace the battery, but it will be about $80+. I took it to the Apple store, and they checked a bunch of stuff, but said that it seemed ok. I'm debating getting a battery for a more reasonable price off of ebay. But if it's the iOS thats draining the battery, then I'm not going to be able to help it. I wish I knew a better way to tell if its the battery, the phone, or the iOS.

How can i get rid of the ''other'' section in my data device?

hi i have over 5go of ''other'' data in my iphone .. and its taking a lot of place how can i get rid of this ?
thanks !

Other is app data, settings, etc. Should be less than 1.5GB.
Restore with your backup. If still large, i.e. > 1.5GB, restore as new, i.e. without your backup.

How do you get the integer of a number with more than 10 digits

I can't seem to be able to get the integer of a number with more than 10 digits.
ex:
integer(12345678901.3) returns -539222987 when it should really return 12345678901
Thanks for the help
(I'm on director 11 at the moment)

You can write a Parent script to represent Big Integers. I wrote some code to get you started. It consist of two classes - "BigInt" and "Digit". At this point you can only add two "BigInts" and print out the value with a toString() function. Note that you pass a String to the "BigInt" constructor.
In the message window you could enter something like:
x = script("BigInt").new("999999999999")
y = script("BigInt").new("100000000000000000004")
z = x.add(y)
put z.toString()
And the output window will show:
-- "100000001000000000003"
Here are the two Parent scripts / Classes
-- Digit
property val
property next
on new me, anInt
val = anInt
next = 0
return me
end new
-- BigInt
property Num
property StringRep
on new me, aString
Num = script("Digit").new(Integer(aString.char[aString.length]))
curNum = Num
repeat with pos = aString.length - 1 down to 1
    curNum.next = script("Digit").new(Integer(aString.char[pos]))
    curNum = curNum.next
end repeat
return me
end new
on add me , Num2
curNum = Num
curNum2 = Num2.Num
result = curNum.val + curNum2.val
if result > 9 then
    carry = 1
else
    carry = 0
end if
result = result mod 10
sum = script("Digit").new(result)
curSum = sum
curNum = curNum.next
curNum2 = curNum2.next
repeat while curNum.ObjectP AND curNum2.ObjectP
    result = curNum.val + curNum2.val + carry
    if result > 9 then
      carry = 1
    else
      carry = 0
    end if
    result = result mod 10
    curSum.next = script("Digit").new(result)
    curSum = curSum.next
    curNum = curNum.next
    curNum2 = curNum2.next
end repeat
repeat while curNum.ObjectP
    result = curNum.val + carry
    if result > 9 then
      carry = 1
    else
      carry = 0
    end if
    result = result mod 10
    curSum.next = script("Digit").new(result)
    curSum = curSum.next
    curNum = curNum.next
end repeat
repeat while curNum2.ObjectP
    result = curNum2.val + carry
    if result > 9 then
      carry = 1
    else
      carry = 0
    end if
    result = result mod 10
    curSum.next = script("Digit").new(result)
    curSum = curSum.next
    curNum2 = curNum2.next
end repeat
StringRep = ""
me.makeString(sum)
return me.script.new(StringRep)
end add
on toString me
StringRep = ""
me.makeString(Num)
return StringRep
end toString
on makeString me, digit
if not digit then
    return
end if
me.makeString(digit.next)
put String(digit.val) after StringRep
end makeString

How can I get PlayOnLinux's wine config to detect my audio device?

This is really bugging me, I've been all over the internet for answers but can't seem to find out how to get this to work...
I have Steam installed under PoL (PlayOnLinux) using wine 1.5.10 internally and I just can't seem to get any sound in my games. When I go to PoL's 'wine' configuration options and select 'configure wine' then click on the 'audio' tab of the winecfg that comes up it says "Selected driver: (None)" and there's no hardware detected!
I've heard that this might be a pulseaudio issue and that I should run it using ALSA instead, only I don't know how to do this. Plus I'm running the Cinnamon desktop so I get a load of gnome dependencies some of which are tied to pulseaudio (e.g. gnome-settings-daemon) and I don't know if I can safely remove these without borking my DE (and without ending up in dependency hell).
Here's the console output from PoL:
$ playonlinux
[main] Message: PlayOnLinux (4.1.8) is starting
[clean_tmp] Message: Cleaning temp directory
[Check_OpenGL] Message: 32bits direct rendering is enabled
[Check_OpenGL] Message: 64bits direct rendering is enabled
[main] Message: Filesystem is compatible
(python2:30355): Gtk-CRITICAL **: IA__gtk_widget_get_direction: assertion `GTK_IS_WIDGET (widget)' failed
[install_plugins] Message: Checking plug-in: Capture...
[install_plugins] Message: Checking plug-in: ScreenCap...
[maj_check] Message: List is up to date
[install_plugins] Message: Checking plug-in: PlayOnLinux Vault...
/usr/share/playonlinux/bash/startup_after_server: line 38: [: : integer expression expected
/usr/share/playonlinux/bash/startup_after_server: line 38: [: : integer expression expected
[POL_SetupWindow_Init] Message: Creating new window for pid 30801
(python2:30355): Gtk-CRITICAL **: IA__gtk_widget_get_direction: assertion `GTK_IS_WIDGET (widget)' failed
(python2:30355): Gtk-CRITICAL **: IA__gtk_widget_get_direction: assertion `GTK_IS_WIDGET (widget)' failed
[POL_SetupWindow_Close] Message: Closing window for pid 30801
[POL_Wine] Message: Running wine- winecfg (Working directory : /home/shodan/.PlayOnLinux)
[POL_Wine] Message: Notice: PlayOnLinux deliberately disables winemenubuilder. See http://www.playonlinux.com/fr/page-26-Winemenubuilder.html
err:module:load_builtin_dll failed to load .so lib for builtin L"winealsa.drv": libasound.so.2: cannot open shared object file: No such file or directory
err:mmdevapi:DllGetClassObject Driver initialization failed
err:ole:apartment_getclassobject DllGetClassObject returned error 0x80004005
err:ole:CoGetClassObject no class object {bcde0395-e52f-467c-8e3d-c4579291692e} could be created for context 0x1
err:ole:CoInitializeEx Attempt to change threading model of this apartment from multi-threaded to apartment threaded
err:module:load_builtin_dll failed to load .so lib for builtin L"winealsa.drv": libasound.so.2: cannot open shared object file: No such file or directory
err:mmdevapi:DllGetClassObject Driver initialization failed
err:ole:apartment_getclassobject DllGetClassObject returned error 0x80004005
err:ole:CoGetClassObject no class object {bcde0395-e52f-467c-8e3d-c4579291692e} could be created for context 0x1
[POL_Wine] Message: Wine return: 0
I found something on WineHQ's support forum about mmdevapi (which I think is a DLL file) which was somehow being automatically disabled by WineTricks and needed to be re-enabled, only it didn't say how plus I'm not using WineTricks (unless PoL uses it in the background or something?).
The odd thing is that this all worked fine on my old laptop (before it died), but the really annoying thing is that my old laptop wasn't up to playing more than some basic indie games, no serious FPS or Racing sims, but now I've got a brand new desktop (core i7, HD7870 etc. -- "proper job"!) that's powerful enough to play high-spec games I can't get any audio!
Does anyone please know how I can have sound enabled in Wine through PlayOnLinux?

@akspecs -- Yes I was rapidly coming to the same conclusion, thanks.
Besides, I figured I ought to do it properly and learn how to actually configure and use WINE as it should be, from the command line!
In the meantime however I'd actually mitigated this problem by committing the ultimate sin -- I installed Windows natively in it's own partition and set up a dual-boot (bring on Steam for Linux so I can remove this evil!).
It's not even really a 'classic' dual-boot because with my EFI / UEFI mainboard (once I'd got the Windows DVD to play nice) it meant no need to hassle with boot chaining in grub / syslinux etc. Now I have 2 'native' EFI boot options (stored in my mainboard's NVRAM) it's just a case of hitting the button to bring up the boot-menu during POST, then selecting which OS I want to boot -- Arch by default of course!

HOW CAN I GET MY DATA BACK ON MEDIA CARD AFTER WIPING DEVICE

please help, i wiped my device clean then did a back up and everything was back except the things i had on my media card. how do i get it back?

When you wiped your device, there is an option which you must check in order to wipe your Media card, did you have that checked or unchecked?
I am afraid that the Media Card in included in the backup of the device memory.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How can I get music I purchased though Amazon on my Android device(droid incredible) to my IPad 2 without using a computer?

I just got an iPad 2 a couple months ago, and I'm very eager to get my music collection purchased from Amazon to my device. I have had to get a replacement droid incredible and lost my login information for both my email and my amazon account. I have the music files stored on the SD card on my phone. I have the basic iPad 2, 16 GB, wifi, no 3G. I got an iPad to essentially replace my computer since it can't hold a charge anymore. I am almost due for an update with Verizon, so I would like to get an IPhone. However if I can't transfer my 100s of dollars worth of music, I'll have to suck it up and stick with android and be unable to have more than the 3 songs I have on my iPad.
If any one can help It would be greatly appreciated.

It sounds as if you have a computer but it won't hold a charge. Does it not work if it's plugged in at home? If so, you can simply transfer the music to your computer at home. You can either do this by connecting your Incredible to the computer and dragging the music from the SD card to iTunes or, you can contact Amazon and get your password reset and just download the music.

How can I get a list of available shared variables from my device?

I have to develop a program to connect to many OPC ready devices. I don't have these devices yet but I have setup two PCs. One is simulating a device. Does anyone know how to read a list of the available shared variables on a device or on another PC so that I can use them later on in the program for reading and writing?
Thanks
Matt

There is a community example that lays out what I think you want to do. You can find it here:
http://decibel.ni.com/content/docs/DOC-9523
I hope that helps!
National Instruments
Applications Engineer

How can you create an activity as subsequent act. of more than one activity

Hi.
I want to create an activity as subsequent activity of more than one activity.
I am using FM CRMXIF_ORDER_SAVE, but if I write data structure CRMXIF_DOC_FLOW with more than one item the system shows the error CRM_COPY 010 More than one predecessor was entered for data transfer.
However I have customized multiple relationship allowed, and if I do multiples links in transaction crmd_order it works all right.
Only it doesn't work with FM CRMXIF_ORDER_SAVE. I need create activities with FM because they are interface R/3. What FM can I use to create multiple subsequent activities?
Thanks and best Regards
Sorry for my english.

Hi,
I have got some activities creates in the system. (e.g. Act. 1, Act. 2, Act. 3 and Act. 4). With the FM CRMXIF_ORDER_SAVE filled the structure CRMXIF_DOC_FLOW you can create subsequence activity of one of them (e.g. Act. X.1). I need create the same activity (Act X.1) from another activity, (e.g. Act. 2). I know to do this in transaction CRMD_ORDER by link tab. But I don't know how to do this using FM or BADI or another thing.
Act. 1 Act. 2 Act. 3 Act. 4
.....Act. X.1
Thanks in advance.
Edited by: Ana Isabel París on Jul 7, 2008 2:42 PM

How can i use IDSM-2 in inline mode for more than two VLANs?

can i use the IDSM-2 in inline mode to be ips to more than two VLANS
like this or it isn't
intrusion-detection module 5 data port 1 access-vlan 10,20,30,40,50
intrusion-detection module 5 data port 1 access-vlan 100,200
thank u all for your help

The IDSM-2 ports need to be configured as trunk ports with multiple vlans rather than as access ports.
http://www.cisco.com/en/US/partner/products/hw/vpndevc/ps4077/products_configuration_guide_chapter09186a00807517eb.html#wp1068377
And instead of creating an inline interface pair by pairing Gig0/7 with Gig0/8 within the IDSM-2 configuration, you would create inline vlan pairs.
With an inline vlan pair you pair 2 vlans on the same interface.
You can have up to 255 inline vlan pairs on each interface (assumining you keep the total traffic from all of the pairs within the IDSM-2s performance limit of around 500Mbps)
How to create inline vlan pairs:
http://www.cisco.com/en/US/partner/products/hw/vpndevc/ps4077/products_configuration_guide_chapter09186a00807517bb.html#wp1047852
The other aspect you need to be aware of is that not all IOS versions will support configuring the IDSM-2 data ports as trunk ports for inline vlan pairs.
Your best bet is to use 12.2(18)SXF4 or a later version on the 12.2(18)SXF train.
The 12.2(33)SR train does not currently support the trunk feature for the IDSM-2.

How can I get a E3000 or E4200 to manage more than 5 devices

Similar Messages

Maybe you are looking for