How can I get a free adobe reader to open the files that my instructor has sent and listen to her feedback

Any Ideas?

Hi tpcruiser22,
Did your instructor provide PDF files? You can get the free Adobe Reader for viewing them from www.adobe.com/products/reader.html.
And if you want to "listen" to the files that your instructor provided, you can activate Read Out Loud in Reader by choosing View > Read Out Loud > Activate Read Out Loud.
Best,
Sara

Similar Messages

How can I download a free adobe reader

Where can I download a free adobe reader

Adobe - Adobe Reader download - All versions
Be sure to deselect the additional downloads if you do not want them.

Can't get newly-installed Adobe InCopy to open/create files

I have a user's computer which I upgraded the OS on (10.4.11 to 10.6.5), and afterwards I went to check to see if InCopy runs. It couldn't open any files. After awhile, I realized that it couldn't do File->New either. If I open a file, spinning beachball of death. If I launch the app without a file, I can wander about the menus fine, until I do File->Open, which brings up an OpenPanel, or File->New which brings up a panel with some page configurations. As soon as I click on the "OK" or "Continue" button in one of those panels, it's over -- spinning beachball, with Force Quit the only way out. So
I started over -- ran uninstall and install -- here is what I have done:
1. Ran the uninstaller, ticking the remove preferences option.
2. Put all remaining InCopy files that I could find in the trash, emptied the trash.
3. Ran the CS5 cleanup tool which I found on the adobe support site. (It cleans up CS3 and CS4 installs, too.)
4. Looked around for Library/Preferences/Adobe/In Copy is root Library and each user's directory, trashed everything.
5. Used applejack to fsck the disk, repair permissions, clean system and user caches, clean up virtual memory.
6. Rebooted, logged in to an administrator account, ran the "Setup" program inside the InCopy installer. Put in the license number, set it to install everything on the list (recommended).
7. Used Get Info on the /Applications/Adobe In Copy folder to set its permissions and the permissions of all files down the tree to read+write for everyone.
8. Launched InCopy, Clicked on File->New and hit "Continue" on the panel. Program hangs.
9. Force Quit InCopy.
10. If I use AdobeUpdate to Update to 6.0.6 I get exactly the same behavior.
11. If I update to 6.0.5 I get the same behavior.
12. If I try to open an existing InCopy file, it hangs the same way.
13. Enabled the root account repeated the entire rigamorole as root.
14. Deleted In Copy and associated files as root, installed as administrator.
15. Try running as root and as (non-privileged) users.
My own computer runs InCopy just fine, giving these messages to the Console:
1/21/11 3:34:24 PM [0x0-0xaa5aa5].com.adobe.InCopy[43770] Error in XmlRpcClient::writeRequest: write error (error 32).
1/21/11 3:34:51 PM Adobe InCopy CS4[43770] * __NSAutoreleaseNoPool(): Object 0x3618180 of class NSCFArray autoreleased with no pool in place - just leaking
1/21/11 3:35:40 PM [0x0-0xaa5aa5].com.adobe.InCopy[43770] virtual uint32 XMLRPCIdleTask::RunTask(uint32, IdleTimer*) threw -18151471 (feeb07d1) 'Failed executing externalEditor.registerEditor'
I can watch the Console on the machine where IC hangs, it gives all of those expected Console messages, until I go to open the file, and there are no messages after that.
Anybody have any clue as to what I've broken? We have InCopy alone or InCopy as part of the whole CS4 in multiple machines, and everyone else's works just fine.

Nah, plenty of disk space, and was able to install and run photoshop later without incident.

How can I resolve error message, Linklok could not open the file ?

I have an MP3 subscription download link (with Abraham HIcks) but I am unable to complete the download because I get the error message "Linklok could not open the file".

Please have the site administrator contact us at vibralogix.com as it appears something is not setup correctly with Linklok on their site.

When using Excel "microsoft Office" I find on my desktop files that I am unable to task, move or relocate. How can I get rid of them ? on my desktop files that I cannot trash, move

I find files onmy desktop that I am unable to move ,trash or relocate. How can I clear my desktop?

Ongoing problem with Excel on Macs - it's been around since at least 2004 or earlier. For some reason some of the temporay files don't get deleted when you save.
Re-launching Finder sometimes works, but otherwise restart.

Adobe reader not open the file immediately after saving it with Microsoft Office

I have an older version Adobe Reader 9, and worked fine until today. I did the upgrade to Adobe Reader XI (11.0.06).
I have Window´s Office 2010 on my computer. When I save a document on *pdf file, Adobe starts automatically and open the document (Open file after publishing.) After the upgrade, documents are not open automatically and shows the next message: "There was an error during initialization. An internal error ocurrred." and "There was an error opening this document. Access denied.". But if I try manually, files are open. How do I fix this problem.

I'm having a similar issue. The .pdf files open fine locally, but when I put them up online, they will not open and I get the same error message. If I download and save the files, they show a 1KB file size instead of 168KB.
Drive space is not an issue (looking at over 225GB of free space on the main drive).
In searching on-line, the main cause I am finding is receiving the file via e-mail and a decoding issue. This is not the case with these files as they were created on my machine and uploaded using Filezilla to the server. I'm using Acrobat Pro 7.0 on a windows box running Vista Ultimate.
Any ideas on what would be causing this issue?

I am having an issue with my adobe acrobat 9 pro. Every time I try to open a pdf from someone it opens it up with my free adobe reader rather than the Acrobat 9 pro so then I don't have all of the functions of 9 pro. How do I get it to open with 9 pro ins

I am having an issue with my adobe acrobat 9 pro. Every time I try to open a pdf from someone it opens it up with my free adobe reader rather than the Acrobat 9 pro so then I don't have all of the functions of 9 pro. How do I get it to open with 9 pro instead of the free reader?

It may depend on the plugin that is loaded into your browser. However, right click on a PDF and select the Open With option and go to the default button to select Acrobat as the default. That might do it.

I downloaded and paid for an app on my ipad, how can I get it free on my iphone without using itunes as my laytop is broken. I cannot seem to find the purchase tab in app store? I am logged in using the same ID

I downloaded and paid for an app on my ipad, how can I get it free on my iphone without using itunes as my laytop is broken. I cannot seem to find the purchase tab in app store? I am logged in using the same ID

First, the app must be universal...designed for both iPhone/iPad:
Tap App Store.
Make sure you're signed in with the same Apple ID used for the original purchase.
Tap Updates.
Tap Purchased on the resulting screen.
Locate the app in your Purchased tab.
Tap the download icon.
The app will begin downloading and you'll be taken back to your home screen.

HT204266 How can I get a free app without a credit card?

How can I get a free app without a credit card? I just bought an ipod touch and don't have any apps on it yet. Thank you.

Read this link:
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card

On my Mac Pro how can I get voiceover to start reading at a specific point on a document?, on my Mac Pro how can I get voiceover to start reading at a specific point on a document?

On my Mac Pro how can I get voiceover to start reading at a specific point in a document, and then continue on to the next paragraph and so on? Thank you. Ed

Welcome to the Apple family!!!!
How can I cause the VO cursor(box) show-up/start?
Press Control-Option and F5. The F5 key is located on the top row of keys 6th key over. This is a toggling "Keyboard Shortcut" for turning VoiceOver on and off.
How can I move the VO cursor to various sentences or paragraphs of an article and have it start reading ... and perhaps even continue reading on to the next paragraph(s) ... even to the end of the article?
How to read a website with VoiceOver
Step 1: Go to the Website
A quick keyboard shortcut is Command-L. This will jump you up to the address bar. Start typing where you want to go. i.e "www.thewebsite.com"
Step 2: Working with Webpage
VoiceOver will automatically start reading the website. You can pause the speech by hitting the 'Control Button'.
If VoiceOver does not being reading the webpage, then you might have to "Interact" with it. If VoiceOver say "HTML Content" then press Control-Option-Space-Down Arrow to interact with the webpage.
Use Control-Option-Right Arrow to move throught the website. This will speak "EVERYTHING" on the page.
Most website that I've found have their articles labeled as 'Heading'. You can jump from heading to heading, by pressing Control-Option-Shift-H.
If you'd like an itemized alphabetical listing of the site, press Control-Option-I
Press Control-Option-Space on the link or article you want to view.
Step 3. Reading from Top to Bottom
Once you found and clicked on the the article/link, use the same 'Heading' command, Control-Option-Shift-H to find the title.
After finding the title, press Control-Option-A will start reading from the title on.
Note: If there are any other items (ads, pictures, etc) it will read those too.
Tip: You might be able to activate a feature called the 'Reader'. The Reader isolates the article and elimanates the ads The keyboard command is Shift-Command-R. You can also find it in the Menu Bar (Command-Option-M) under the word 'View' then 'Show Reader'.
I am using a MACPro with OSX, probably Mavericks 10.9 (where would I look to see if that is the correct information?)
You can find this information under the 'Apple menu' in the Menu Bar. To access the Menu Bar, press Control-Option-M.
Go to Apple Menu > About This Mac. This will open up another window. Use Control-Option-Right Arrow until you hear 'Version'. If you purchased it brand new from Apple within the last six month, more than likely you have Mavericks.
Recommanded Articles.
AppleVis- Commonly used Keyboard Commands
Chapter 2: Learning VoiceOver Basics
Chapter 6: Browsing the internet
Apple Accessibility Resource Page
The 'Commands Help' Voiceover Menu. Control-Option-H-H. (hit H twice) is my best friend. It's a searchable VoiceOver Menu with most of the VoiceOver command. Example: You are looking for the 'Read Current Paragraph' keyboard command. Press Control-Option-H-H and then type Paragraph. It will then bring up all the commands with the word paragraph. I believe there are three.
As from the Trackpad Commands, I've copied and pasted below from Appendix A: Commands and Gestures
VoiceOver standard gestures
If you’re using a Multi-Touch trackpad, you can use VoiceOver gestures. VoiceOver provides a set of standard gestures for navigating and interacting with items on the screen. You can’t modify this set of gestures.
NOTE:Gestures that don’t mention a specific number of fingers are single-finger gestures.
General
Enable the Trackpad Commander and VoiceOver gestures
VO-Two-finger rotate clockwise
Disable the Trackpad Commander and VoiceOver gestures
VO-Two-finger rotate counterclockwise
Turn the screen curtain on or off
Three-finger triple-tap
Mute or unmute VoiceOver
Three-finger double-tap
Navigation
Force the VoiceOver cursor into a horizontal or vertical line when you drag a finger across the trackpad
Hold down the Shift key and drag a finger horizontally or vertically
Move the VoiceOver cursor to the next item
Flick right
Move the VoiceOver cursor to the previous item
Flick left
Move content or the scroll bar (depending on the Trackpad Commander setting)
Three-finger flick in any direction
Go to the Dock
This gesture moves the VoiceOver cursor to the Dock wherever it’s positioned on the screen
Two-finger double-tap near the bottom of the trackpad
Go to the menu bar
Two-finger double-tap near the top of the trackpad
Open the Application Chooser
Two-finger double-tap on the left side of the trackpad
Open the Window Chooser
Two-finger double-tap on the right side of the trackpad
Jump to another area of the current application
Press Control while touching a finger on the trackpad
Interaction
Speak the item in the VoiceOver cursor or, if there isn’t an item, play a sound effect to indicate a blank area
Touch (includes tap or dragging)
Select an item
Double-tap anywhere on the trackpad
You can also split-tap (touch one finger and then tap with a second finger on the trackpad)
Start interacting with the item in the VoiceOver cursor
Two-finger flick right
Stop interacting with the item in the VoiceOver cursor
Two-finger flick left
Scroll one page up or down
Three-finger flick up or down
Escape (close a menu without making a selection)
Two-finger scrub back and forth
Increase or decrease the value of a slider, splitter, stepper, or other control
Flick up (increase) or flick down (decrease)
Text
Read the current page, starting at the top
Two-finger flick up
Read from the VoiceOver cursor to the end of the current page
Two-finger flick down
Pause or resume speaking
Two-finger tap
Describe what’s in the VoiceOver cursor
Three-finger tap
Change how VoiceOver reads text (by word, line, sentence, or paragraph)
Press the Command key while touching a finger on the trackpad
Rotor
Change the rotor settings
Two-finger rotate
Move to the previous item based on the rotor setting
Flick up
Move to the next item based on the rotor setting
Flick down
To customize other gestures by assigning VoiceOver commands to them, use the Trackpad Commander.
Assigning VoiceOver commands to gestures
If you need a reminder about what a gesture does, press VO-K to start keyboard help, and then use the gesture on the trackpad and listen to the description.
Learning about keys, keyboard shortcuts, and gestures
Sorry lots of information. Enjoy. You

How can I sync my various email accounts into an iCloud account. Example. I have an embarqmail.account. How can I get it to sync with iPhone, iPad, iMac so that I don't have to read or review eMails on all 3 devices. Thanks

How can I sync my various email accounts into an iCloud account. Example. I have an embarqmail.account. How can I get it to sync with iPhone, iPad, iMac so that I don't have to read or review eMails on all 3 devices. Thanks

You need OSX 10.7.2 or higher in order to access icloud. The mobile me account is now defunct (it closed down more than a year ago).

If I own Adobe Photoshop Elements 12 and have it installed on my computer, how can I get access to Adobe Bridge without a monthly subscription? Is there a way to use Adobe Photoshop and Bridge without paying a monthly fee?

If I own Adobe Photoshop Elements 12 and have it installed on my computer, how can I get access to Adobe Bridge without a monthly subscription? Is there a way to use Adobe Photoshop and Bridge without paying a monthly fee?

Hi Jaclyn2,
Please follow the steps mentioned in the kb: http://helpx.adobe.com/creative-suite/kb/error-update-server-repsonding-cs4.html .
Regards,
Romit Sinha

I have typos in my podcast description. Updating the RSS does not correct this. How can I get iTunes to re-read my RSS???

I have typos in my podcast description. Updating the RSS does not correct this. How can I get iTunes to re-read my RSS???

Thanks for your help.
Here are the RSS feeds:
http://www.solidrockvista.com/Podcasts/Lite/rss.xml
http://www.solidrockvista.com/Podcasts/Phat/rss.xml
And here are the iTunes pages:
http://itunes.apple.com/us/podcast/james-world-lite/id162059136
http://itunes.apple.com/us/podcast/james-world-phat/id162296074
Both Podcast Descriptions have typos.

How can i get a free download, i tried but its impossible, now, and when i sign up on creative cloud for logging in, said now you are exit .

How can i get a free download, i tried but its impossible, now, and when i sign up on creative cloud for logging in, said now you are exit .

If you have exhausted your free trial period on your computer, even if you didn't actually get to try it, short of wiping and reinstalling your entire system from scratch you're not going to be able to extend the trial period. If there was a way, there would be people who would take advantage and just never subscribe.
-Noel

How can I get all tracks from an album into the album in my library?

When importing the albums from a folder, the tracks for some of the albums were split up. How can I get them in one?

Hello JudyD276
The article below will give the steps to get the songs grouped together for you.
Why aren't songs with the same album art grouped together?
http://support.apple.com/kb/TS1468
Thanks for using Apple Support Communities.
Regards,
-Norm G.

How can I get a free adobe reader to open the files that my instructor has sent and listen to her feedback

Similar Messages

Maybe you are looking for