How can I get a indesign debug version?

How can I get a indesign debug version? is it free?
Anyone could give me a download link?
thanks

I know this is available to solution providers, if you are registered as such at partners.adobe.com. I don't know what level of membership is required, but that is one place the debug version is available from.
Thanks,
Max
Max Dunn
Silicon Publishing
www.siliconpublishing.com

Similar Messages

How can I get 64-bit windows versions other than 'nightly'

How can I get a 64-bit version of Firefox for Windows that isn't alpha quality (Nightly).
I'm still running FF 3.6.26 ....
I've said before, give me a reason to upgrade...64-bits would be a good reason, but the fact that a large number of extensions fail -- (try to install the latest firebug 'swarm' in nightly -- epic fail! (404)...), we not only don't have a swarm for you we've never even heard of you!...
So give me a version of FF-go-nightly, that's equiv to the latest released version, and it might have a chance...
I did get most stuff working -- curious why jar files were renamed to 'ja', they don't seem to be in japanese when I unpacked them... ;-) I found it wasn't a typo...
had a full transparent brower on about blank... a bit weird. but sorta cool...
finally figured out how the menus were messed up and saw howto correct most of the damage, but without spending alot more time fine-tuning, it would be hard to get it back just right.. but after spending a day (~10am-8pm on using Nightly), upgrading/config'ing various extensions....etc.
Anyway, I know I said give me a reason.. to upgrade from 3.6 -- a carrot rather than a stick, but too many problems...come on .. even the version was unlucky to begin with! (13!?) .. (I like 13, really, but thought it was humorous).
So how about 64-bits in something a bit better supported?
Why not 64bit versions of each of the releases?
Finally FF got a bit better perf (a bit worse for more debug on, but better in having enough memory, and using a native instruction set rather than the virtualized 32-bit WOW, that it normally runs on...)...

Mozilla has never released a 64-bit version of Firefox for Windows, and the 32-bit versions of Firefox are faster than the Nightly 64-bit version test builds.
http://www.mozilla.com/en-US/firefox/

How can i get the middle east version?

How can i get the middle east version?

For which version of InDesign? The answer is completely different, depending on the version you're using.

How can I get back the other version of itunes?

It was much easier to use and way more confortable, How can I get back the other version of itunes? It was much easier to use and way more confortable
I can't pass playlists from itunes to my i-pod, and the sthetic of the new itunes is not a good one.
Could I get back an older version? those were easier to use, more simplier

Apple wisely leaves a copy of iMovie version 9 installed in the Application folder when you download version 10.

I have an Ipod touch updated to last available ios 4.2.1. How can I get the last compatible versions of the apps?

I have an Ipod touch updated to last available ios 4.2.1.
How can I get the last compatible versions of the apps?
In the appstore there are only the lat app versions, most of them are incompatible with my device.
I know that previous versions of these apps were compatible with my ipod.
Can all download them someway?
thanks

The problem is: I never had the compatible versions. But I want them, I'd buy them if I could.
So I'm stuck with my Ipod, which can't be upgraded anymore to higher IOS versions, and with the appstore, that does not offer older versions; versions that have existed and still exist, perhaps in the recycle bin of some users, or somewhere in the appstore servers.
I know, its a policy, just to sell more devices. Will not work with me. I'm not buying more Ipods

How can I get instructions for old versions of Garage Band please, eg Garage Band 3 and Garage Band 6?

How can I get instructions for old versions of Garage Band please, eg Garage Band 3 and Garage Band 6? thanks

meredithfromkybybolite wrote:
How can I get instructions for old versions of Garage Band please, eg Garage Band 3
http://manuals.info.apple.com/en/GarageBand_3_getting_Started.pdf
meredithfromkybybolite wrote:
and Garage Band 6?
GB6 is the latest version, so all current docs should directly refer to that.

How can I get back an older version of a document in Pages from the icloud

In Pages I thought I could edit down and rename a document and it would keep the original intact - how can I get the original back?

If you resaved the file and changed its name it is wherever you saved it to.
If you changed the name of the open file then that is your only copy.
You can go back to previous versions by various methods. In Pages 5 it is:
Menu > File > Revert
Peter

How can I get my Indesign script to apply to all pages in the document?

My script (java) shown below will only apply to the first page of the document. How can i get it to apply to all pages of my document? What am I missing? Thanks.
scirpt:
myDocument = app.activeDocument
with (myDocument.pages.item(0).marginPreferences){
columnCount = 1;
//columnGutter can be a number or a measurement string.
columnGutter = "0";
bottom = "0"
//When document.documentPreferences.facingPages == true,
//"left" means inside; "right" means outside.
left = "0"
right = "0"
top = "0"
inside = "0"

Hi,
You have to iterate through all pages.marginPreferences:
var
myDocument = app.activeDocument,
allPagesMaPref = myDocument.pages.everyItem().marginPreferences,
curPageMaPref;
while ( curPageMaPref = allPagesMaPref.pop() )
with (curPageMaPref) {
columnCount = 1;
//columnGutter can be a number or a measurement string.
columnGutter = "0";
bottom = "0"
//When document.documentPreferences.facingPages == true,
//"left" means inside; "right" means outside.
left = "40"
right = "0"
top = "0"
inside = "0"
Jarek

How can I get access to "beta" versions of JRE?

Hello,
Our company uses Java to develop the main application. Sometimes we got bad surprises when new updates are released to public.
We are planning to do advanced testing to avoid this kind of situation, but how can we find the next JRE version for testing?
The Oracle website pointed me to the url: Java Early Access Downloads and then https://jdk7.java.net/ . In the downloads section, I can find only the update 60 version for download, but I noticed the version that will be released to public will be the update 55.
How can I test version update 55 of the JRE? What is the correct procedure for testing further versions?
Thanks!
Almir

7U55 will be a CPU release. Generally, such releases are not made available to the public.

Exchange 2013 remote session running as PowerShell version 2.0. How can I get it to run version 3.0?

I'm trying to use the newer Powershell 3.0 features, particularly the ability to disconnect/reconnect a remote session, for our Exchange 2013 administration tools. I have 3.0 on my workstation, and am connecting to a remote session on an Exchange 2013
server (on Server 2012).   Even LOCALLY on the Exchange 2013 server Exchange Management Shell I get the same behavior:
Exchange Command Shell on an Exchange 2013 server (running Windows Server 2012)
[PS] >$PSVersionTable
Name                           Value
PSVersion                      3.0
WSManStackVersion              3.0
SerializationVersion           1.1.0.1
CLRVersion                     4.0.30319.19117
BuildVersion                   6.2.9200.16628
PSCompatibleVersions           {1.0, 2.0, 3.0}
PSRemotingProtocolVersion      2.2
[PS] C:\Windows\system32>Get-PSSession
Id Name            ComputerName    State         ConfigurationName
1 Session1        mercmbx35r.n... Opened        Microsoft.Exchange
[PS] C:\Windows\system32>$session = Get-PSSession
[PS] C:\Windows\system32>$session.ApplicationPrivateData.PSVersionTable
Name                           Value
PSVersion                      2.0
PSCompatibleVersions           {1.0, 2.0, 3.0}
PSRemotingProtocolVersion      2.2
BuildVersion                   6.2.9200.16628
CLRVersion                     4.0.30319.19117
WSManStackVersion              3.0
SerializationVersion           1.1.0.1
How/where can I force the Exchange session to run version 3.0?
Thanks in advance,
Rick Tatem

I still can't get it to work that way. I changed my cfexecute to:
<cfexecute name="C:\windows\system32\cmd.exe" arguments="/c C:\Inetpub\wwwroot\captcha\#cmd_filename#" outputFile="C:\testoutput.txt" timeout = "90"></cfexecute>
And I changed my bat file to have:
<cfsavecontent variable="cmd_content">
cd\
TSC.exe /s "#newString#" C:\Inetpub\wwwroot\captcha\#FileName# Mary (for Telephone)
</cfsavecontent>
The output file is showing:
C:\ColdFusion9\runtime\bin>cd\
C:\>TSC.exe /s "3.....P.....4.....Z.....8.....U.....7.....X....." C:\Inetpub\wwwroot\captcha\3P4Z8U7X-105724.wav Mary (for Telephone)
I still can't get it to run the exe. I have watched the process list while running this and the exe doesn't show up. I tried cfexecute on the exe directly before trying the bat method, with hard coded arguments, and it still didn't work. I am so lost right now this makes no sense to me.

How can I get rid of multiple versions of the iTunes Folder

I am using Windows 7 and iTunes 12.1.1.4. Multiple iTunes folders have been created on my computer (on both my C: drive and my D: drive under Users and My Documents) and they all have different content. Some albums show up in one instance of the iTunes\iTunes media\music folder and some show up in another. How do I get all the content synched up? Can I simply drag and drop all these iTunes folders into D:\My Documents\My music\iTunes (the D: drive being where I store all my documents and photos) and then delete the rest of the iTunes instances?

Several remedies may apply:
For media files that are correctly linked from your iTunes Library, i.e., they will play without reporting something like this:
you can make sure that everything is contained within your main iTunes folders by selecting File > Library > Organize Library... and when you get this prompt:
check the Consolidate files box and, if not greyed out, the Reorganize files ... box and then click OK. This will move any media files that are in other locations to the folders under the setting in Edit > Preferences > Advanced:
This is the location of your media folder. By default, this will be C:\Users\username\Music\iTunes\iTunes Media, where your iTunes database (the iTunes Library.itl file) is stored in C:\Users\username\Music\iTunes. In general that relationship between the database and the media folders should be preserved - in the example above the complete library is stored on a external drive, with the database in K:\iTunes and the media folder location being K:\iTunes\iTunes Media. Note that this setting doesn't tell iTunes where to find media files (that info is embedded in the database); rather, this setting determines where new media is placed within the media folders.
Checking this causes iTunes to automatically place media in folders, and (re)name media files, based on the metadata associated with the files. For music this means that everything will be in folders following the pattern iTunes Media\Music\artist_name\album_title and files to be named using the disc number (if present), track number and song name.
Checking this makes iTunes copy all new media into the media folders, independent of the method of adding it.
Second case ...
For songs that are listed in your library but you do get the "missing file" error, right-click on one of these songs - there will be a "(!)" symbol next to its name, right-click > Get Info. When you get this prompt:
click No (there's a bug in iTunes 12 such that you actually have to click No twice). Then go to the File tab and look for the Location information - sometimes you have to scroll down or expand the editor window to see it. You'll see something like this:
The "file://localhost/" prefix indicates that iTunes can't locate the file. The rest of the entry is the path to the file that iTunes holds in its database, i.e., where iTunes "thinks" the file is. This may be enough of a clue to determine where it actually is - close the editor, right-click > Get Info again, but when you the "... cannot be located ..." prompt click Yes then navigate to and select the correct media file. In many cases iTunes will then be able to adjust its location info for other songs. Otherwise there are a number of techniques that you can use to track down and repair these broken links - often using scripts running against the iTunes database.
... and the third case:
If you have folders that are labeled as "iTunes" but their content doesn't appear in your library within iTunes itself, add these to the library by any of these methods:
select File > Add Folder to Library... then navigate to and select the folder(s) containing the "missing" albums/songs
drag and drop these folders from Windows Explorer into iTunes
copy these folders into iTunes' Automatically Add to iTunes folder
Once you've been through these steps its probably worth running the Consolidate Library process again to make sure everything's in the right place. Once you've checked that to be the case, you can delete any stray "iTunes" folders that are outside the hierarchy rooted in the folder where your database and your standard iTunes Media files are located.
Two final points:
Moving files and folders around yourself never fixes anything in iTunes - in most cases it'll only make things worse by creating (more) broken links
A couple of turingtest2's valuable user tips also apply here:
Make a split library portable describes the optimal layout for an iTunes library, easing the processes of moving it between computers and maintaining a backup of it, as well as the steps needed to bring a library into that shape
Backup your iTunes for Windows library with SyncToy describes a suitable/recommended method to create and maintain a backup ... when you've gone through the effort to make your library just exactly perfect you don't want to lose it all as the result of a virus, hard disc crash, or other fatal failure!

I replaced sync data on server, how can i get access to older version of my sync data?

Hello!
I've a problem. I synced my data from desktop browser and then reinstall browser. After that i pressed Sync now, entered my credentials and i thought that this browser will download my data. But by this deeds i replaced my previous data. How can i restore it?

Hello Mightymad,
Thank you for contacting Mozilla Support. Sorry, about your loss of data.
Sync isn't intended for the purpose of being a "backup" service while the user re-installs their operation system. It was made to synchronize data between Firefox installations on multiple devices, where not every device is devoid of their Firefox installation and data at the same time.
Unfortunately, if you've overwritten the Sync data your previous version is lost.
I wish we had better news for you, but hopefully this gives you a better idea how Sync works, so you're better prepared next time you go to reinstall.
Patrick

How can i get rid the library version = hate it for bookmarks are not handy

i used to be able to view and use bookmarks as a left side of an open window. now i have to use the ''library'' which comes up as a separate window and is using too much space. i hate it - how can i go back to the old way of viewing bookmarks?

'''Ctrl + B''' in keyboard or go to '''View''' then '''Sidebar''' then '''Bookmarks'''.
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

How can I get a 3.x version back on my MAC so that it will work with my website CMS program?

I need a 3.x firefox version on my mac so that I can use a website CMS program to update a client's website. Can I have a 3.x version on my mac, as well as the newer 4.0 version?

The software on the disc is written to run in, and only in, MS Windows. It can't run in the Mac OS. You can either install in on a Windows PC, or install Windows on your Mac and then install the software to run it in Windows.

How can I get rid of outdated versions of Flash?

Hi. I'm new to the Adobe forums and I need help with Flash
Player.
On a friend's recommendation, I ran my system through Secunia
Software Inspector. It found that my Adobe Flash Player was
outdated and that I have five outdated versions of Macromedia Flash
on my system in seven different locations.
I have updated my Adobe Flash Player, and that's fine now,
but the installation failed to get rid of the old versions of
Macromedia Flash. The Secunia writeup even hinted this might be a
problem, and suggesting I go to "the vendor" (Adobe) to find out
how to solve the problem. Here's what it said:
"NOTE: When updating Flash Player, older versions are not
always automatically removed from your system. If older versions
were detected that you believe should not be present, then please
contact the vendor regarding how to remove them from your system."
These Macromedia files don't show up in my Control Panel >
Add/Remove facility. They don't even show up if I Search for
Macromedia. I did copy down the names of the files where Secunia
says they are found:
C:\WINDOWS\SYSTEM32\Macromed\Flash\swflash.ocx (version
4.0.7.0)
C:\WINDOWS\SYSTEM32\Macromed\Flash\Flash.ocx (version
7.0.19.0)
C:\i386\swflash.ocx (version 4.0.7.0)
C:\Program Files\Common Files\AOL\Flasha.ocx (version
6.0.80.0)
C:\Program Files\EarthLink Setup\Windows\access\program
files\EarthLink TotalAccess\Flash.ocx ( version 6.0.79.0)
C:\i386\Flash.ocx (version 7.0.19.0)
C:\i386\NPSWF32.dll (version 8.0.24.0)
Can anyone suggest a solution? I am not at all adept at
computers (for all I know, even asking this question gives me
away), so I may need extra-simple language. But apparently, talking
to people who know Adobe is the only way I can find myself a
solution.
Many thanks.
newbuilder

Hi,
You may already know this, but have you checked your folder
options under the tools menu in Windows explorer?, not your browser
Internet explorer. Click folder options, click on the view tab,
click on show hidden files and folders and you can deselect hide
protected system files and folders. Hit apply and Ok. Do another
search, type in some of these file names or their extensions,
Ex.(*.ocx), and the files should come up, oh I almost forgot, down
at the bottom of the search page there are options, choose to
search for hidden files or system files, then do your search again.
Secunia says in order to disable the prior versions to delete
certain files, but it doesn't look like one can remove all the
entries and files from ones registry or hard drive, it looks like
they will always remain on your pc, but the previous flash player
versions should be disabled. When you find and remove these files,
I recommend you go back to the folder options in windows explorer
and select hide protected system files and folders. Just so you
don't accidentally delete these important files, unless you know
what your are doing, if you do, your computer will be messed up
royally. Also, it may be a good idea to also select hide hidden
files and folders. It depends on your knowledge of the pc.
Good Luck! I hope this helped you.

How can I get a indesign debug version?

Similar Messages

Maybe you are looking for