How can I get a low resolution audio file?

Hello to all. I have recently upgraded my iTunes to 11.0.03. I remember being able to create a new audio file of specifications offered by the menu in iTunes. My present requirement is to make a low quality MP3 file of an existing higher quality file and find that I am unable to do it with this new version of iTunes which only creates a new version of like quality and does not offer me options of selecting the quality of the file I need to make. Any help in this matter will be deeply appreciated.

Thanks Jim for the leads. I did go into preferences>import settings and set it to the lowest offered quality. When I then selected the file and clicked, I have not been given the option of converting the file but only create:
When I had earlier clicked this option, it only resulted in a same sized file being replicated.
Anyway, I proceeded and clicked create MP3 version and, 'lo and behold' it created one according to the import settings that had been made!
Thanks Jim, you have solved my problem.

Similar Messages

How can I get rid of a music file use in a menu?

How can I get rid of a music file use in a menu? I try to get rid of it from the menu inspector but although I delete it there, it is still in use by the menu!
it is not inthe audio window in the menu inspector but is still in use! wiered!

Click on the menu with the audio, then look in the property inspector, under the 'general' tab.
Towards the bottom there is the list containing the audio file for the menu - click on the file and use the '-' button in the bottom left corner of the PI...

HT201066 How can I split a long recording audio file into multiple audio files?

Hi,
How can I split a long recording audio file into multiple audio files?
With Windows I was using Nero software, which is not available for Mac. Is there any similar app for free for Mac?
Thanks!

Hello ingiorgio
You can import the track into GarageBand and then split the tracks there. Once that it is done you can highlight the ruler section and then share the song to iTunes to get them separated out.
GarageBand - Split regions in the Tracks area
http://help.apple.com/garageband/mac/10.0/#gbnd76fcce04
GarageBand - Share songs to iTunes
http://help.apple.com/garageband/mac/10.0/#gbndfb96a96f
Regards,
-Norm G.

I have created my magic movie how can I get it to a mpeg4 file

I have created my magic movie, can I share this with I tunes ect, and how can I get it to a mpeg4 file?

Are you referring to Magic DVD rather than Magic Movie? If so you really can't go from an iDVD project to iTunes. You would need to create a slideshow in iPhoto and export it out as a QT movie before importing into iTunes
or create the slideshow/movie in iMovie and Share directly to iTunes:
What system, iDVD and iPhoto versions are you running? What is the media, i.e. photos or movie files, that you used in the iDVD project?
OT

Need help. 2012 mac mini 5.1 digital audio not working only stereo out. How can I get 5.1 digital audio?

I have a 2012 mac mini with a mini toss link to toss link cable connected to an a/v reciever (Sunfire, grand theater 3) capable of dolby digital and dts. I am not getting 5.1 digital audio only stereo audio. Midi setup format 48000 hz 2ch-16 bit integer. In speaker configuration stereo is the only option all others are grayed out. How can I get this to work? Please help.

You should set up as 24bit integer. Toslink does not support
multi-channel encoded over a 16bit link. Just not enough
bits available.

How can I get back the default system files icons to my fles?

Hello,
After installing an application like FontExplorer, all my fonts got it's icon.
I went to a font, selected and did get info, I tried to delete the icon but could not.
I know the default icons for OTF fonts and an italic O, half green, half black.
How can I get those Icons back,
Or in general,
When files gets an application icons, how can I restore the default icons for files?
Thank you
Shlomit

Icons in the Get Info pane can be changed back to the original icon by clicking on the icon once, to highlight it, and then pressing Control X (for cut).
But in your case the font icon is probably more due to the association with the application selected to open it with, ie FontExplorer. So with the Get Info pane open for a selected font type you need to change which application you use to open it with. For example, if you select one of the OTF fonts and do a Get Info, in the Open With pane it will show FontExplorer. Change this to Font Book and it should change its default icon.

How can I get Thumbnails back in the file View Menu?

My computer died and I had to re-install CS6. I had originally installed it to an external hard drive expecting that I could just hook up a new computer when the time came and everything would work as before. Not to be. I contacted Adobe and got the program re-installed. Now, when I open a file, I am unable to change the view in the View Menu to 'thumbnail' because 'thumbnail' is no longer an option. How can I get that option back?
Thank you.

Are you talking about in the File>Open dialog in photoshop cs6?
Could you post screenshot of what you see?
Windows 7 doesn't have a thumbnail option as windows xp, but you should be able to at least see the jpeg thumbnails without any third party programs.
If you pick Tiles or one of the three Icon options at the top, your not able to see the jpeg thumbnails?

Cisco NSS324 - how can I get a list of opened files - similar to psfile

I have a Cisco NSS324. I need to determine what files are open and by what users.
I have AD integration - so the users I am looking for are Windows users.
for Windows servers we are using 'psfile' - how can we get a similar tool that works with the Cisco NSS324?
thank you
Calin

Calin,
Not to familar with window server using psfile. I know of a feature i use in the NSS to give me an idea what local/domain user are accessing. Under Administration-->System log settings click on System connection logs--> click options and select protocol you would like to monitor and then start logging. This will display any users accessing the NSS and there accessed resources. You can also send this information to your local syslog server and save the copy to your local NSS .
Hope this helps,
Jasbryan

How can I get my Illustrator cs4 original file settings?

My Illustrator cs 4 settings files have been corrupted by a virus and I need them so I can create a new document. How can I get them? So far, I can't create a new document because of this problem.

Yes. You can change the Language you want installed using the Adobe Application Manager (AAM). You will need to uninstall the language you currently have before switching. Click on your name in the top left of AAM to access the Preferences menu which has the Language setting.

6750 How can I get a ''Low Battery Alert'' from my...

I have recently bought a 6750. At one point I realized that my phone died without any warning. Went through the User Guide, nothing.
Went through the phone and only found one thing under: >Settings > Tones > Other Tones, ON or OFF. I set it to ON.
Is this going to solve my problem or is there something else that I need to set?
How can a mobile not come by default with a low battery alert?
Maybe the OVI Suite should have a GUI to help setup the phone with all the proper instructions?

the only way to find out if warning tones set to on will work is to let the battery run low again
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

How can i change a low resolution photo into higher one without losing much quality.

I opened a photo and it has a poor quality, how can i fix it to a better one??

You really can't, but there are some tools out there that will do _some_ upsizing.
For example, Genuine Fractals does a pretty good job. You could increase size, then instead of printing at 72dpi (screen resoulion) you could print at 300dpi. Then add things like gausian blurs, sharpening, demozaicing.. ect...
But as Dorin said, it will not be good becuase you can't create what isn't there. But sometimes with a LOT of work, you can create the illusion that something might be better...
Cheers!

How can determine the duration of an audio file

Hi,
i'm making speech recognition project using java. i can capture sound by michrophone and playback it. the type of the sound is .wav.
my question is how to determine the recording duration (for example: determine the duration for 0.25 second) because i must recorded syllable,the assumtion is needed less than 0.5 second to say a word. and then.. can this wav file be changed into... binary or integer ?
thanks for your help

FYI I'm newbie in Java,
Yes, I want to limit the audio file lengths to a certain value. What should I do?
I have read wav file using an AudioInputStream, for audio format I'm using sampleRate = 8000.0F and sampleSizeInBits = 8. My friend said if I used 8 bit for sampleSizeInBit (resolution in amplitude) the binary file should be -128 till 127 in range according to the bit. I try this code and the result is binary file which is zero, positive, and negative.
the code
try{
audioInputStream.read(audioBytes);
for (int i=0; i<audioBytes.length;i++){
System.out.println(audioBytes);
catch(IOException ioe){
System.out.println("Error"+ioe);
I'm not sure that the code is right, but it works. Should I change the audioBytes into integer before? I try this code but it doesn't work.
int a = new int[audioBytes.length];
for (int i=0;i<audioBytes.length;i++){
a[i] = new Byte(audioBytes[i]).intValue();
this binary file has been printed in console (Im using texpad). So, how I can write that to file.txt? I'm using FileoutputStream but it doesn't work correctly. Here is the code
FileOutputStream fos = new FileOutputStream(strFilePath);
{audioInputStream.read(audioBytes);
fos.write(audioBytes);
catch (IOException ioe){
System.out.println("Error"+ioe);
When I open file .txt is read as character like this üüüüüüüüüüüüûüüüûüûûû ||||||| ||||||| ||||||||||||||||||||||||||||| ےےےےےےےےےےےے (like using alt plus number)
Edited by: anasfr on Mar 19, 2009 9:02 AM

How can i get all links from html file ?

I tried some code:
List<string> metas = new List<string>();
string text = "";
string mys = "";
public List<string> LockedThreads(string filename)
HtmlWeb web = new HtmlWeb();
HtmlAgilityPack.HtmlDocument doc = new HtmlAgilityPack.HtmlDocument();
doc.Load(filename, Encoding.UTF8);
var metaTags = doc.DocumentNode.SelectNodes("//meta");
if (metaTags != null)
foreach (var tag in metaTags)
if (tag.Attributes["name"] != null && tag.Attributes["content"] != null)
text = tag.Attributes["name"].Value;
mys = tag.Attributes["content"].Value;
var linksOnPage = from lnks in doc.DocumentNode.Descendants()
where lnks.Name == "a" &&
lnks.Attributes["href"] != null &&
lnks.InnerText.Trim().Length > 0
select new
Url = lnks.Attributes["href"].Value,
Text = lnks.InnerText
foreach (HtmlNode node in doc.DocumentNode
.SelectNodes("//a/@href | //img/@src"))
metas.Add(node.Name);
In the var linksOnPage i'm getting all the links but some of them not only links for example the first item i see:
[0] = { Url = "/", Text = "    " }
Then the second item:
[1] = { Url = "http://rotter.net/cgi-bin/forum/dcboard.cgi?az=login", Text = "התחבר" }
Next i want to add another loop or variable that will contain only the links after im src for example:
<img
src="http://mysite.com"
border="0"></a></TD><TD
ALIGN="right"
VALIGN="TOP"
WIDTH="55%">
So to get only http://mysite.com
So in the end i will have two Lists:
First List will contain all links from the html file.
Second List only links that are in img src

Ok i'm using regex now and i can get the links i need:
List<string> metas = new List<string>();
List<string> metas1 = new List<string>();
string text = "";
string mys = "";
public List<string> LockedThreads(string filename)
string[] fall = File.ReadAllLines(filename);
foreach (string hh in fall)
if (hh.Contains("http://rotter.net") && hh.Contains("locked")||
hh.Contains("locked_icon_general") ||
hh.Contains("locked_icon_anchor") ||
hh.Contains("icon_anchor") ||
hh.Contains("locked_icon_fire") ||
hh.Contains("locked_icon_sport")||
hh.Contains("locked_icon_camera")||
hh.Contains("locked_icon_movie"))
Regex linkParser = new Regex(@"\b(?:https?://|www\.)\S+\b", RegexOptions.Compiled | RegexOptions.IgnoreCase);
foreach (Match m in linkParser.Matches(hh))
metas.Add(m.Value);
So now in the metas i have in this case two links.
For example the first link is from this block in the file:
The link i got is : http://rotter.net/forum/Images/hot_icon_anchor.gif
And this is the right link from this block but now how do i get the text from this block and how i connect how do i know that this text belong to the link ? I need to add this text from this block to a new List. Before all that i counted on my own lines
and got the text but that's a bad idea.
I need somehow to get: שרשור תשדירי בחירות מרוכז:
To get the text between the ToolTip',' and the second ',' but not from all the html file only in places of this two links i extracted.
<TD ALIGN="RIGHT"
VALIGN="TOP">
<body onmousemove="overhere()">
<a onmouseover="EnterContent('ToolTip','שרשור תשדירי בחירות מרוכז:','כתב: menahem בתאריך: 03.03.15
שעה: 08:51 1. http://youtu.be/utUaqyiRkJ8 ...'); Activate();"
onmouseout="deActivate()"
href="javascript:void(0)">
<img src="http://rotter.net/forum/Images/hot_icon_anchor.gif"
border="0"></a></TD><TD
ALIGN="right"
VALIGN="TOP"
WIDTH="55%">

<a href="http://rotter.net/cgi-bin/forum/dcboard.cgi?az=read_count&om=187966&forum=scoops1">
שרשור תשדירי בחירות מרוכז:
</a></TD>

How can I get an extension from a file...in JFileChooser

I have got a problem here. Here I have a JFileChooser, I want to add in
a FileFilter, and user could only see some type of file. But as long as I
try to get the extension....It wont compile, could any one teach me how
to get the extension of a file in JFILECHOOSER???
============================================
import java.io.*;
import java.io.File.*;
import javax.swing.filechooser.FileFilter;
public class MainFrame extends JFrame implements ActionListener {
public MainFrame() {.............}
private boolean chooseFile()
JFileChooser fileChooser = new JFileChooser();
fileChooser.setFileSelectionMode( JFileChooser.FILES_ONLY );
FileChoser filtering = new FileChoser("txt");
fileChooser.setFileFilter(filtering);
fileChooser.addChoosableFileFilter(filtering);
int selection = fileChooser.showOpenDialog( this );
if ( selection == JFileChooser.CANCEL_OPTION )
return false;
if (selection == -1) {
return false;
File tmpfile = fileChooser.getSelectedFile();
filename = tmpfile.toString();
setTitle( "Smiggin Holes 2010 - " + filename );
return true;
static class FileChoser extends javax.swing.filechooser.FileFilter
String extension;
String description;
public FileChoser(String extension, String description){
this.extension = extension;
this.extension = description;
// Accept all directories and all gif, jpg, or tiff files.
public boolean accept(File f)
if (f != null)
if (f.isDirectory())
return true;
String ext = getExtension(f); //<<<<<<<<<<<THE PROBLEM IS HERE WHEN I TRY TO GET THE EXTENSION OF THE FILE. IT CANT COMPILE
System.out.println("aasdfasdf"+ext);
if ((ext!=null)&&(ext.equals(extension)))
return true;
return false;
// The description of this filter
public String getDescription() {
return "Just Text Files";
======================================
Could you tell me what can I do? To get the extension of the file selected by the user?
And What do I have to change?
Regards,

Hi,
can you post your compile error and the code of getExtension().
Regards
Ldinka

My daughter reset my iphone4. How can I get back recorded memos = sound files? Thank you!

To make things more complicated: I "drowned" my iphone last summer and got a new one (also an i phone 4) in November. When I signed in yesterday after the reset mishap, suddenly old data photos, sound memos from the old phone which I had thought lost were available - although the phone displayed the new (November 2012) apps, too. So I may have logged in with the old (drowned) account and password. How can I log out and be forced to login with the new apple ID to check and - more important - to get reicent sound file memos back? I don't want to risk to delete them.
Thanks for your help and sorry about my struggling in English.

if you want Lenovo's version of the Windows 8, you would need to call the Lenovo Service support in your country.
If you want generic Windows 8 version then you need to get the disc from somewhere (i.e. friend) or purchase it.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

How can I get a low resolution audio file?

Similar Messages

Maybe you are looking for