How can I get a receipt when an email I have sent is opened?

In Outlook and and Outlook Express, you can get an email confirming that your email has been opened. How can that be done with mail on Leopard.
Thanks

This should work - I haven't tested it. It also depends on the other side honoring this header information.
http://discussions.apple.com/thread.jspa?threadID=435120&tstart=60

Similar Messages

  • How do I get a receipt for an email I have sent to know if it has been read on icloud

    IOS 8.1.3 iPhone 6+
    i want to receive a receipt once email has been read on iCloud.com

    You don't.
    Only on iMessages and only if the recipient wants that.

  • How can I list all recipients of an email I have sent?

    Hi there,
    I sent an email to 16 people today using Mac Mail v 7.1 (1827) - 1 group of 15 people and another person. I later found out that the single email may have been wrong and I wanted to check it... i.e. did I put gmail.com instead of hotmail.com?
    When I clicked on the message in the sent folder, the email came up with the display showing the email address I used to send it (on the top left) and on the top right, the timestamp of when it was sent and just below that, a link with "Hide details".
    Clicking on Hide Details DOESN'T actually hide the information !!! it expands with a list of email addresses which in this case was 4 email addresses and a link with 12 more people. Clicking on "12 more" people reverts back to my email address and timestamp.
    So in effect, I can't display the email addresses I sent to and the logic of "Hide Details" seems to be working in reverse.
    The only way I can check to see to whom I sent the email, is to reply to all recipients, view the TO/CC/BCC fields, and then cancel. But surely, clicking on the "12 more" or however more number of people, should display all the email addresses or am I missing something really obvious?
    Thanks,
    Maz

    Hi Wayne,
    Thanks for your reply.
    I tried your suggestion and it still didn't work. I've just done a test email and I've attached the 2 images.
    The first image lists a few of the email recipients and N people more and when I click on "N more", I get the second image.
    So it's either one or the other I get and no full list of email recipients.
    Thanks,
    Maz

  • I have a new iPad. I am using Comcast as my email provider but when I send a message, it pulls up the facebook email addresses for my  contacts  instead of the addresses stored in my comcast account.  How can I get rid of the Facebook email addresses? The

    I have a new iPad. I am using Comcast as my email provider but when I send a message, it pulls up the facebook email addresses for my  contacts  instead of the addresses stored in my comcast account.  How can I get rid of the Facebook email addresses? The comcast addresses are stored in the comcast (xfinity) app.  I do not use the "mail" or "contacts" apps ....I go straight to comcast (xfinity).  I wish I could start over!!!  thanks.
    iPad

    I could be wrong, but it sounds like Facebook imported to your contacts.  I have the Xfinity app on my new ipad, too, but none of my stored contacts from the online version are showing, only what I manually entered into the iPads contacts are there.  When I did add the FB app, I did not grant it permission to push and pull from my ipad (not a fan of FB knowing every detail about me), so that may be where our difference lies.  You could try to open the app and change your privacy settings, or delete it and then reinstall without granting permissions to integrate.
    I'm sure someone here with a lot more knowledge then me can probably diagnose your issue better, though.  Good luck!

  • How can we get ADFSecurity work when used in OC4J, OID and OAM?

    I am getting error in http server log "mod_oc4j: Response status=499 and reason=Oracle SSO, but failed to get mod_osso global context."
    But I am not using Oracle SSO and my client doesn't want to use it either, I am using OAM SSO(CoreIDSSO) in my configuration. Please read the details below.
    I am using ADFSecurity in an app that is protected by OAM. To migrate ADFSecurity permissions from
    system-jazn-data.xml to OID, I used JAZNMigrationTool to populate OID with Grantees and Permissions. OAM gives login page, and authentication works fine.
    But ADFSecurity is not working. ADFComponent Delete button is enabled even for roles that dont have permissions for the iterator delete.
    - The app works fine when I use without OAM. ADF Security permissions work fine.
    - The app works fine when used with OAM, but with ADFSecurity disabled (enforce=false).
    - When I enforce ADFSecurity alongwith OAM, ADFSecurity is not working.
    In the doc "Oracle Containers for J2EE Security Guide b28957", there is a mention of use of CoreIDPrincipal for permissions. Our OID Permissions entries show
    LDAPRealmRole for attribute orcljaznprincipal. I am not sure if this could be the reason.
    We have configured AccessServerSDK for the SOA instance and have policy for the urls in the policy manager. We have entries in orion-application.xml, orion-web.xml and system-jazn-data.xml as per the documentations.
    How can we get ADFSecurity work when used with OID and OAM?

    Have you been able to successfully integrate OAS with OAM & OID? We have similar requriement and so far we have not been able to get it working.
    We have application specific roles which we map to OID roles using orion-application.xml.
    Any pointers to achieve this would be greatly appreciated.
    thanks,
    Dipal

  • How can I get the receipt of my old purchases in particular application?thank you

    how can I get the receipt of one of my oldest purchased in particular application?
    thank you

    If you no longer have the original email receipt for it then all you can do is try and find it in your account's purchase history and (depending upon what you need it for) either copy it's details or take a screenshot : log into your account on your computer's iTunes via the Store > View Account menu option, you should then see a Purchase History section with a 'see all' link to the right of it, click on that and you should then see a list of your purchases.

  • Hi, I purchased apple applications and did not receive receipt, how can I get the receipt?

    Hi,
    I purchased some apple applications and already paid for this in my credit card, but I did not get receipt for it.
    The purchase was on July 5, 2012.
    How can I get the receipt for this purchase?
    Thanks!

    Call the Apple Store and inquire. I believe I read that it can take several weeks for them to send the card, but I'm not certain. The store should be able to tell you.
    Regards.

  • I Lost my iphone how can i get it back when i havent turn on find my iphone i have already log in icloud and still have account and password

    I Lost my iphone how can i get it back when i havent turn on find my iphone i have already log in icloud and still have account and password

    Contact your carrier and the police. If it was lost in a specific building, ask the people running it.
    (124410)

  • HT5622 How can I get on ICloud when it say the maximum number of free accounts has been activated on this iPad?

    How can I get on iCloud when it say the maximum number of free accounts has been activated on this IPad?

    A maximum of three new iCloud accounts can be created on a single iOS device. If you have already created three iCloud accounts (why?) then log in using one of those to start using it.
    Otherwise, you'll have to find another device to create an iCloud account on.

  • How can I get only English when I google instead of part English & part Russian? (an exchange student stayed with us!)?

    How can I get only English when I google instead of part English & part Russian? (an exchange student stayed with us!)?
    Example:
    Silk - Pho Van
    www.phovanrestaurant.com/locations.html - Перевести эту страницу 
    Portland, OR 97214 (on the corner of 34th & Hawthorne) Tuesday - Sunday 11am to 9:00pm, closed Monday 503.230.1474. A division of Pho Van

    Please restate your question, it doesn't make sense the way it's stated. If you are trying to translate Russian into English or vice versa then Google "Google Translate"

  • How can I get rid of old books that I have deleted from my device? It still shows up as purchased books on "Icloud".

    How can I get rid of old books that I have deleted from my device but still shows up as "purchased books" on "Icloud". I don't want to see some of these books at all. I can sort by one that are PDFs and ones currently on device, but it still gives option to show those old titles. Does anyone know how to erase your "Icloud" history, please?

    Nooooooo! lol... If I want to download again I will, I don't want an electronic trail. Plus when I have Ibooks open, sometimes I will accidently hit the item and it will immediatly try to download it. The problem with that is that its "Time magazines Best Photos of 2012" etc and it locks up my IPAD cuz of sheer size of the book. So I would like it gone from the history. Isn't there a way to clear the history? 

  • My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!

    My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
    a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.  
    Step 10
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 11
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 12
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 13
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • I am a Canadian staying in England for a few weeks.  How can I get an iPhoto Book printed win England and sent as a gift to an English relative? With my account, it seems that Apple only allows for my book to be printed in Canada.

    I am a Canadian staying in England for a few weeks.  How can I get an iPhoto Book printed win England and sent as a gift to an English relative? With my account, it seems that Apple only allows for my book to be printed in Canada and then sent to my Canadian address..

    in the iPhoto preferences  change the print products country to the UK and give it a try - there may be some restirctions on billing but it has worked for some people
    LN

  • How can i get a power bar code i only have a ee mobile wifi

    How can i get a power bar code i only have a ee mobile wifi which doesnt allow me to sent texts .. ive tried the sim card in a unlocked phone but it wont send texts

    You could try putting your SIM into an EE phone. It's only a SIM, it should be be able to send an SMS.

  • HI, I need your help. How can I delete all data, when I do not have the special security code, which I didn´t remember ? I also think, that I never create this code before. But I cannot put my settings back.

    HI, I need your help. How can I delete all data, when I do not have the special security code, which I didn´t remember ? I also think, that I never create this code before. But I cannot put my settings back.

    You must remember the code, if you can't then take the phone and proof of purchase to an Apple Store.

Maybe you are looking for

  • No data found from oracle application end

    Hi all i have made a custom PO report, initially when publish a report for particular user out put is coming but when i use different login user and run the same report then there will be no data found in that report,(output is blank). kindly help me

  • What exactly are the updates good for on an ipod

    I ask because mine is windows format, and im having trouble transferring all the metadata off my ipod with senuti to a back up so that i can reformat the ipod to mac and then sync in my senuti backed up library. I was wondering if anyone knows what e

  • Converting scientific notation string to number?

    This is raising an error: > ToNumber (u201C2.75E-05u201D) How do you convert scientific notation strings to numbers? This is coming from XML. I can probably have the XML written so that it's not scientific notation. Tim

  • Error running My Web Service Client From java

    Hi, I have developed and successfully compiled my webservice using the fromjava programming model that comes pre-packed with Jwsdp 2.0. I ran the sample/from java sucessfully and it rn okay. I also wrote a small weservice that just concatenated 2 str

  • How to deinstall CS2 under Vista

    I want to deinstall CS2 (installed under Vista), but can't find the Software in system control (listing of installed programs). How is this possible, and can somebody give me a hint how to remove cs2? Regards Dirk (Berlin)