How can I get a version of Final Cut Pro X that works on OS Mountain Lion?

I just downgraded my laptop to its original OS (Lion) and will be upgrading soon to Mountain Lion because this laptop is too old to work with Mavericks or Yosemeti. So far Final Cut Pro X, Motion and Compressor (which I had originally purchased when I first bought the computer) do not work. Will Final Cut Pro X work on Mountain Lion? If not, what can I do to get a version that will work?
Thanks!

10.0.9 is the latest version compatible with Mountain Lion. I found this article which may help you:
http://thefcpxeditor.tumblr.com/post/70885235923/what-i-can-run-fcp-x-10-1-and-1 0-0-9-on-the-same
At the time it was written it was apparently possible to download from the app store with a computer running ML. Maybe this is still the case.
FCP 10.1. has video requirements which are not met by older machines. I'm not sue about 10.0.9 but that might possibly be a 'gotcha'
I'm a bit confused though since if you downgraded you laptop to Lion but Mountain Lion is the latest OS it will run then you must have been running ML already
Geoff.

Similar Messages

I can't get my projects in Final Cut Pro X to work in 1080p. One turned out to be 1080p but I did everything the same as the ones that did not. ***? Any ideas?

I can't get my projects in Final Cut Pro X to work in 1080p. One turned out to be 1080p by "accident" but I did everything the same as the ones that did not. Same camera/settings (shot in 60i). I didn't really care cause I had to get some stuff done, but now I know I "can" dp them in HD but can't figure why the one went up to YT in full HD (and made a copy in my movies folder. That one project acted totally different than the other 5 but I didn't change anything. Can't get it to work again. ***? Any ideas?

No problem! If you're worried about more complicated edits (which in all honesty, should work no matter how many clips you select or how many effects are attached to them), you can always compound a clip first, and then copy it over after if you're afraid of lots of track clutter getting in the way. Not sure if they would break apart afterwards though if you wanted them to.

My Final Cut sound effects don't show up, how can I get them?, My Final Cut sound effects don't show up, how can I get them?

My Final Cut sound effects don't show up, how can I get them?, My Final Cut sound effects don't show up, how can I get them?

Have you downloaded them?
Incidentally, you seem to have a bad echo.

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

I shot video on a Panasonic P2 and I'm trying to import the MXF files to Final Cut Pro but when I try to import, the only thing that imports is a blurry image of each clip. There's no audio and no video...how can I import MXF files into Final Cut Pro?

at the end, you say "import preferences", which program are you describing?
So im safer using footage that is remotely being pulled from iphoto...
vs
using footage that is imported into FCP from imovie?
Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

How to switch to older version of final cut pro x from 10.1.2?

How to switch to previous version of Final cut pro X after once it is updated to 10.1.2?

M. Stochholm wrote:
This project plays 1:50:00.
Kindly
Michael
Not sure what that means…1 minute and 50 seconds? Or 1 hour and 50 minutes?
Russ

I can't install trial version for final cut pro x

I can't install trial version for final cut pro x on my computer..

What are you trying to achieve? Are you editing movies as a hobby? Or trying to build a business – and, if so, what kind?
iMovie is the first thing that comes to mind. Not the depth of FCPX, but it can still do some excellent work.
Russ

Hi, I accidentally deleted a project in trash. How do I get it back into final cut pro X. It is still sitting in trash,

Hi, I accidentally deleted a project in trash. How do I get it back into final cut pro X. It is still sitting in trash.

If your working on an external hard drive, just drag/drop back in the Final Cut Projects folder, and re-open FCPX

What is the oldest version of Final Cut Pro HD that supports...?

What is the oldest version of Final Cut Pro HD that supports clips from Panasonic P2 Cameras?

You must have 5.0.4 or later.
Nothing earlier will work:
http://library.creativecow.net/articles/rossshane/p2workflow/video-tutorial.php

How can I import DVD footage in Final Cut Pro X

I want to edit a showreel of my own work in Final Cut Pro X (version 10.1.4). A lot of my old footage is only available on DVD. I need to get this footage into Final Cut Pro X but don't know how to do this. There are programs to convert DVD to DV but I don't know which one to use, and how to use them.

The script provided by MPEG Streamclip worked for me.
But there is an alternate way, which is basically doing by hand what the script does.
The actual component that is needed is stored inside an archive file in the inside the package. This file needs to be copied to a place where the system can see it.
Here are detailed instructions. Be sure you fully understand before putting any files in the Library folders, as described below. No guarantees, but if followed correctly I believe this works.
1) Double-click the .dmg file.
2) Inside there are two folders. Open the one that says "For Quicktime 6.4 or later..."
3) Control-click the QuickTimeMPEG32.pkg and choose "Show Package Contents".
4) Copy the file "Archive.pax.gz" somewhere else on your mac - I will use the Desktop as an example.
5) Double click the copy of "Archive.pax.gz" on your desktop. It will expand and create a folder on the desktop called "System".
6) Inside the folder called "System" is a folder "Library" and then "Quicktime", with a single file called "QuickTimeMPEG2.component".
This is the file that MPEG Streamclip needs!
7) I suggest you place this file in your own user's Library. To do this, hold down the option key and select Library from the Go menu in the Finder. There, if it does not exist already, create a folder "QuickTime" and copy the component there. This should work.
Note: the script actually places the component in a different location - one which I think should not be messed with (inside /System/Library).
I think it should work in the user's Library, but if not I would put in /Library (the Library at the root of the drive) before trying the location above.

How can I get my Final Cut Pro 7 to Work with 10.8 Lion?

I get these two messages and then Final Cut Pro shuts down. Please don't tell me to use FCProX because I don't have time to learn a new system and need to edit a project today. Anyone who has real info on this please help! Thank you SO MUCH! xoxo

Use Disk Utility to repair the permissions on your system disk.
Download Preference Manager (free) from Digital Rebellion
http://www.digitalrebellion.com/prefman/
to trash your FCP preferences.
MtD

How do I get the files from final cut pro trial to final cut pro

I purchased Final Cut Pro after using the trial version and I don't know how to get the project I was working on into the new purchased version?

You should be able to determine which version your trial is by control-clicking it on your desktop and selecting "Get Info" from the contextual menu that appears.

How can I restart media import in final cut pro?

The operation of background activities on Final Cut Pro is often convenient, except when an import gets interrupted by an inadvertant media removal. I usually have multiple SD cards connected to my Mac doing imports, and if I have more media than I have adapters/slots to connect them with, I will invariably unplug the wrong card, and interrupt an import that is in progress. When I put the card back in, there is nothing that I can see to "restart" the import of that media where it left off at, or at least start over, and overwrite any incomplete files. Instead, it seem that I need to import the card into a new event, and then use finder to then move the media files into the old event folder structure. Only then, can I get something that seems to work.
Is there some other way to reliably restart the import, or otherwise force the import to actually work? It seems that if I try to import to the same event, again, I see the animation of the closing file selection dialog toward the events, but the background tasks window shows no activity, and I don't see anything ever complete as an import.
This, also blocks any attempt to "share" the project too, because it keeps complaining about an import which has not finished, and thus the project is still referencing "media on the camera" . That limitation has got to go away too! I really want to construct my project, share it, and move on. Waiting for media to "import" when I actually can construct the project with the preliminary media view doesn't make sense. Even if importing needs to happen for conversion/rendering for the share, just do that in the background. Let me say "share", and go do something else with my time!
I have submitted feedback on this, but if anyone has pointers of simplifying import from SD cards that would be great!

Select the photos you want rotated, open the Inspector (command-4). In the Video section of the Inspector, hover your mouse near the Transform and click show if it's not already open. The rotation setting is in there.

I just bought Final Cut Studio, now Final Cut Pro X came out. Can I get a refund on Final Cut Studio now that it is obsolete?

I think this is so bad on Apple's part. I just bought Final Cut Studio, and now they release Final Cut Pro X. Apple keeps a veil of secrecy about the release of their products, but if I had known Final Cut Pro X would have integrated the main Final Cut Studio components I would have waited. How could anybody have predicted an App from the App Store would integrate 3 of the extensive components of Final Cut Studio? I am ticked off that I spent $1000 for FCS, and now Final Cut Pro X basically makes it obsolete! Is it possible that Apple will offer a refund for Final Cut Studio, since really they should not have been selling it so close to the release of Final Cut Pro X?

Thanks for the feedback everyone. I am more at peace of mind that there may be a market now that Final Cut Studio is off the shelves. Basically I bought Studio to ramp up my video making abilities from iMovie for promoting my son's adaptive skiing. Studio gave a lot of great functionality for me, but I also bought FCP X and it has most of what I need. I had thought that there was no way to have the rest of the Studio (Motion, Color, Soundtrack Pro) in FCP X unless you had the full Studio before hand. Some Apple folks thought similarly to me, which is why I dropped the grand on it. Now I found that Color and the Soundtrack piece are integrated into FCP X. I was baffled. I am still not clear on what I can do with the full Studio that I cannot do with FCP X? As with any new software release there are bugs at first. I am guessing that if I ride out the bugs much of the functionality from the Full Studio will be in FCP X (and Motion and Compressor Apps), thus making the Studio eventually obsolete, since the 64 bit and full use of my Quad Core Processor is definitely one step up, with some of the other step downs. I mean, check out what Conan's team has done!
http://teamcoco.com/video/conan-editors-love-final-cut

Can I have two versions of Final Cut Pro installed on my Mac

It is posible to have Final Cut Pro 7 & FCP X installed on my Mac Pro.. currently I'm using FCP 7,

Yes.
Final Cut Pro 7 and the other FCS apps will be moved to a subfolder in your Applications directory.

Feedback: Final Cut Pro 7 upgrading to 10.8 mountain lion

I have an iMac 3.1GHz i5 16GB RAM
I would like to upgrade to Mountain Lion 10.8 but not sure if there will be any problems with Final Cut Pro 7.
What can you tell me about your experience with the upgrade?

Yes I did, but I must tell you that I have only upgraded my Mac Book Pro to ML. My main edit computer is a Mac Pro with SL. I use the laptop to try things out. A lot of guys on here would advise a clean install of OSX and FCS.
DM

How can I get a version of Final Cut Pro X that works on OS Mountain Lion?

Similar Messages

Maybe you are looking for