How can i get a video file with subtitle out of DVD Studio Pro?

i got a project for a dvd in dvd studio pro. There are subtitles which i created within dvd studio pro.
Now i want make a web version of the video with the subtitle, how can i get to this?

Hi Mr. Cutter,
There is an app called "D-Subtitler for Mac" (as well as several others)
which should allow you to extract the subtitles from a copy of the
finished dvd and use them otherwise.
It's been awhile since I had to do it but it is a fairly common need
so the software exists.
J>H<L

Similar Messages

How can I get the video file to run correctly?

To try to make a long story short, I was recording video using a capture card and adobe premiere and I ran out of room on the HDD and adobe premiere shut the recording down by its self, leaving me with a file that is right around 51gb in size (so i assume there is something in that file). But the thing is even though the file says its an avi file, ever program iv used to try to fix the file says it doesnt recognize the file as an avi file. I was wondering if there is a way to salvage the video file or am i stuck with a lead (51gb) weight of a file? if so, ill just delete it, but i would much rather get the file fixed... its the only copy of the video file that i have so it would be a realy wonderfull thing that i get the file fixed.

One product that I have used, when there is a poorly formed AVI header is Digital Video Repair (cannot recall if it is freeware, or shareware), BUT it is likely that your file's header was NEVER written, so no amout of "repair" will succeed. Still, might be worth a try?
With many AVI's, the header often comes first, where with some other formats, like MPEG-2 and WMV, the header is the last part of the file. Could be that the header of the AVI is just incorrect, such as with the Duration. Only a test will determine if you can repair the file.
Good luck,
Hunt

How can I get a movie file with no cmpression?

When I export the sequence in fcp, will I get a full resolution( no compressed image) if it's set on dv/dvcpro?
also, if I bring this file to toast, how I do know I am compressing it or not since toast makes a dvd anyway?
thank you!

if I bring this file to toast, how I do know I am compressing it or not since toast makes a dvd anyway?
I'm not sure if I understand your question's syntax, but let's assume you want to make a DVD-Video of your program. In doing so, the video and audio will need to be compressed rather heavily (depending on program length/bit rate). Toast, iDVD, Compressor and DVD-SP will all handle the compression/encoding, but among all of those, Toast has one of the lowest quality encoding outputs.
I'd recommend using a Compressor (for compressing/encoding) and DVD-SP (for authoring and burning) workflow for maintaining the best quality.
-DH

How can I capture AVHDC video files from Panasonic HD video camera??

I just received a Panasonic HS300 video camera and can't copy the video files on my computer.
I see several files in the CAM_HDD camera folder on the desktop. But the only relevant files for me to copy are the JPG photos. I don't see any video files.
In the specs of the camera they write that I should have a Mac with an Intel processor. Is that the problem???
I even tried to copy the files on a PC (I succeeded) and then brought them on my computer with a USB stick. It didn't work: again, the only relevant files that I could see were the JPG, no trace of any video (but they were indeed on that USB stick!!).
How can I access those video files and use them in Final Cut Pro, or even iMovie??
I'm becoming afraid that i won't be able to use that camera unless I buy a new Mac now!!!
thanks!

you need this: http://www.shedworx.com/voltaichd
the native iMovie / FC AVCHD codecs are only for Intel Macs, the format is a highly compressed HD format which needs to be unpacked & converted for use.
The powerbook may not be up to editing these files. expect a slow process of exporting & working with the footage.
Message was edited by: kmac1036

My iPod Classic is seen by Windows but not by iTunes. I have reset it, gone to disk mode and it won't show up in iTunes. There appears to be music on it in a file called MUSICSAVE. How can I get this to work with iTunes again?

My iPod Classic is seen by Windows but not by iTunes. I have reset it, gone to disk mode and it won't show up in iTunes. There appears to be music on it in a file called MUSICSAVE. How can I get this to work with iTunes again?

1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4 Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
7. Check for third-party software conflicts.
<Link Edited By Host>

How can I get a ai. file? I've made a drawing for a company who would like to use it on a shirt. But they need the ai file. I made it with adobe illustrator for ipad.

How can I get the ai. file? I've made a drawing for a company who would like to use it on a shirt. But they need the ai file. I made it with adobe illustrator for ipad.

Unfortunately logging into your account won't help, because then I don't have access to Illustrator.
I was just trying around a little if you could share it with me, but unfortunately sharing doesn't seem to work with Draw files. You could try and find someone near you who also has an iPad and Illustrator and then try to send it to them via AirDrop. But I don't know if that actually shares the file or just a PNG.
Maybe someone on the Draw forum has an idea how you could send the file to someone else.
Adobe Illustrator Draw

When i try to access iwork on iCloud on my mac, i get an ipage logo with 2 options learn/get image. I already have ipage on my mac. How can i get to the file management page?

When i try to access iwork on iCloud on my mac, i get an ipage logo with 2 options learn/get image. I already have ipage on my mac. How can i get to the file management page?

Lion will only let you add documents to iCloud through iCloud.com, iCloud.com requires the iOS apps before you can use it.
Mountain Lion will let you add documents to iCloud from the iWork apps themselves, you don't then need the iOS apps before they can be opened on another Mac.

Premire only import audio in a .mov file, how can i get the video?

premire only import audio in a .mov file, how can i get the video?

Wild Guess:
If that is not the solution:
FAQ: What information should I provide when ask... | Adobe Community

I accidently deleted a convo with a important video on it and its not backed up into itunes and i have ICloud turned off how can i get that video back?

I have deleted a conversation and it held a very important video, I need to get that back i didnt download it into my photo album and i didnt back it up into my itunes and my ICloud is turned off because i had a problems with it. How can i get that video back?

No way to recover it unless the other person didn't delete it on their end but the Perfect time to activate iCloud Drive and you won't ever need to worry. If you set it up correctly.

Help! How can I get my video to show on my website?

Hi
I created an interactive book in InDesign CS5.5 and exported the .swf file to my desktop to include all the media (a video) and the interactive page turns. I generated an HTML page and according to this page, http://kb2.adobe.com/cps/827/cpsid_82754.html, there was supposed to be a 'Resources folder' with the video asset in there. However this folder was not created.
When I open the html page in my browser, everything works perfectly.
However, when I went to upoad the html and .swf files to my website, http://www.avantiandg.co.uk/ the last page with the video does not show.
My questions are:
1. How can I access the resources folder that is supposed to be created that I am supposed to upload to my website folder?
2. How can I get the video to load up correctly?
Thanks

maybe a solution:
Videos contained in interactive files must be converted to M4V format before being imported to Indesign, AVI, H264 or MPG won't appear once the file exported to SWF.
In HTML the ressource folder is normally next to the root file of your site (index.html) no?

How can I get the lesson files for Aperture 3.2.4?

How can I get the lesson files for Aperture 3.2.4?

They are only available on the original Installer dvd with the boxed retail version.
But you can easily use your own photos to try out the tutorial videos. The videos are linked on the Aperture Support page.

Hi,I have restored my iPhone 4s and i forgot to backup it before restore,so I haven't a backup.How can I get back my files from my iPhone??

Hi,I have restored my iPhone 4s and i forgot to backup it before restore,so I haven't a backup.How can I get back my files from my iPhone??

One day this was happened to me:I deleted some videos that i don't need and after about a month i went to a music concert and i recorded with my iPhone for about 25-30 min and my iphone froze and automacitly restarted after a restart when a went home and i wanted to watch what i had recorded and in my camera roll on my iphone i saw the videos that i deleted about a month ago!!! With this fact i think that the videos aren't deleted they are somewhere i would pay how much is needed to get the videos and photos back .So please someone who knows something about this HELP ME PLEASE !!!!

How can you get 2 videos to play simutenously together?

How can you get 2 videos to play simutenously together so both are playing side by side on screen at the same time?

Welcome to the forum.
As Steve observes, what you are talking about is called "PiP," or Picture in Picture.
He has given you the basics of creating a "split-screen" PiP, and that should be exactly what you wish to do.
For more detail, plus more ways to do PiP, I strongly recommend his book, Cool Tricks & Hot Tips for Adobe Premiere Elements 11, from Muvipix. He has an entire chapter (Chapter 10) on PiP, and many of its uses, with detailed instructions on the settings to accomplish it. Just that one chapter is worth the price of the book.
Good luck, and happy editing,
Hunt

Exporting photos for UHDTV or Native 4K TV, what are the best settings ? (File: Quality File: Color Space, Image Sizing and resolution) Or in other words; How can I get the smallest files but keep good quality for display on new UHDTV

Exporting photos for UHDTV or Native 4K TV, what are the best settings ? (File: Quality File: Color Space, Image Sizing and resolution) Or in other words; How can I get the smallest files but keep good quality for display on new UHDTV

You're welcome, and thank you for the reply.
2) Yesterday I made the subclips with the In-Out Points and Command-U, the benefit is that I've seen the clip before naming it. Now I'm using markers, it's benefit is that I can write comment and (the later) clip name at once, the drawback is that I have to view to the next shot's beginning before knowing what the shot contains.
But now I found out that I can reconnect my clips independently to the format I converted the master clip to. I reconnected the media to the original AVI file and it worked, too! The more I work with, the more I'm sold on it... - although it doesn't seem to be able to read and use the date information within the DV AVI.
1) Ok, I tried something similar within FCE. Just worked, but the file size still remains. Which codec settings should I use? Is the export to DV in MOV with a quality of 75% acceptable for both file size and quality? Or would be encoding as H.264 with best quality an option for archiving, knowing that I have to convert it back to DV if I (maybe) wan't to use it for editing later? Or anything else?
Thank's in advance again,
André

How can i get my saved files from 4.1 to show up on 5.n?

how can i get my saved files from 4.1 to show up on 5.n?

The document saving portion of the app was moved to the printer control app for the 5.0 update. You can use file sharing to copy the files from your device with 4.1, and then copy them in to the printer control app after. This can either be done wirelessly, or by USB through itunes. The document below will show you how to do both options to get them copied off of the device. Then you simply do the same steps in the printer control app to copy files back in.
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=120&prodSeriesId=...
Jon-W
I work on behalf of HP
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS STAR on the left to say “Thanks” for helping!

How can i get a video file with subtitle out of DVD Studio Pro?

Similar Messages

Maybe you are looking for