How can i get a wired internet connection in a hotel to connect to an iPad?

I am going to South Korea. The hotel says they have a wired connection for internet service.
I'd like to leave my laptop at home and use my wi-fi for email etc.
is there a gadjet or something will will allow me to access the internet in my room?

cherft wrote:
I do not believe any suggestions will work unless you also carry a laptop that will help you to initially configure the router.
So if you are ONLY carrying an iPad, you are stuffed! Can anyone help to confirm this?
thanks very much
Incorrect. I took a new, never before opened Airport Express to Japan with me. I configured it with the aforementioned Airport  Utility which I had downloaded to my iPad before I left. It took lestt then 5 minutes to set up.

Similar Messages

  • I have several pdfs on my iPad in iBooks. My iPhone shows only the categories, none of the documents. How can I get my iPhone to also show the documents that are on my iPad?

    I have several pdfs on my iPad in iBooks. My iPhone shows only the categories, none of the documents. How can I get my iPhone to also show the documents that are on my iPad?

    You will need to connect your iPad to your computer's iTunes and do File > Devices > Transfer Purchases to copy them over to your computer (that will copy PDFs and epubs that are in the iBooks app, not just actual ibooks), and you can then sync them to your iPhone. Or you might be able to open each PDF in iBooks on your iPad and use the share icon to email them to yourself and then use 'open in' in the Mail app on your iPhone to copy them to its iBooks app (if the PDF is protected then you may not get the email option via the share icon).
    The Settings > iBooks > Sync Collections setting doesn't copy items between devices, it just means that it a bookor PDF is on both devices and you move it into a collection on one device then it will be moved into the same collection on the other device

  • I have purchased songs from itunes on my ipad but now they are not there anymore. How can they get them back? Dont come up in songs not on this ipad and in itunes it asks to buy again

    I have purchased songs from itunes on my ipad but now they are not there anymore. How can they get them back? Dont come up in songs not on this ipad and in itunes it asks to buy again

    If you are now in the US then you can only use the US store, so you should update the address on your account
    Changing country : Change the country of your iTunes Store, App Store, iBooks Store, and Mac App Store account.
    Had you copied the songs over to your computer's iTunes library, do they show in the Music section on it ? You can copy purchases that you still have on your iPad over to your computer's iTunes library via the File > Devices > Transfer Purchases menu option

  • How can I get contacts and calendar from outlook on my desktop to my new ipad 4

    How can I get contacts and calendar from outlook on my desktop to my new ipad 4

    Move the cursor over the icon and click the X that appears.

  • Can't get my wired internet working

    As the topic sujests, I can't get my wired ethernet working.
    I'm using Mac OS X 10.5.2, I have a Linksys WRT54G router
    configured to automatic DHCP.
    I go into my iMac's System Preferences > Network > Ethernet.
    I should be able to select DHCP from the configure menu and the router
    should give me my IP address. I went into the router's settings and put my computers MAC address in, and it has assigned my iMac an IP. But on the iMac,
    it doesn't come up.
    Any help would be appreciated.
    Thanks
    Message was edited by: ShaneO'Connor

    I tried that.
    The way I got it to work is: I set the "configure" to manually. Then I entered the IP Address, Subnet Mask, Router, DNS Server, and Search Domains. And now it works. Thanks for your suggestion though.

  • Since I downloaded the most recent version of iOS, my iPad and iPhone do not have all the music (from CD's) anymore that I have on our home computer iTunes Library.  How can I get all our music onto the music libraries on the iPhone and iPad? Thanks!

    Hi
    Since we downloaded the latest version of iOS on our iPad and iPhone, and synchronized our music collection in the Cloud, we can no longer see on our iPad and iPhone the music from our CD's that we have on our home computer's iTunes library.  We can only see music in the iPhone and iPad library that have been purchased on iTunes.  How can we get all our music from our computer's iTunes librbary visible on the iPhone and iPad?  Thanks, Nick

    Resync from your computer.
    iOS: Syncing with iTunes - Support - Apple
    If your having trouble syncing, come back and let us (fellow users) know.

  • TS4036 I have had to do a factory reset on my ipad3,when i restored via i.cloud not all my apps were restored how can i get them back,they show on the back up list on my ipad in icloud,any help is appreciated thanx,   Andrew

    I took my Ipad to my local Apple store as it would not d`load or update apps. They factory restored it,on icloud backup restore not all my apps were restored including some i`d paid for, they show up on my list of appsin icloud, how can i get them back? any help very welcome, thanx...Andrew

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    Downloading Past Purchases from the iTunes Store, App Store and iBooks Store
    http://support.apple.com/kb/ht2519
     Cheers, Tom

  • How can i get a refined internet search, only show words that are used in search request

    Can i get a refined search. For example, show only the words that have been entered in the searchbar

    Hi,
    You can try putting the word or phrase inside double quotes (" "). I think this would work in most search engines.
    [https://support.google.com/websearch/bin/answer.py?hl=en&answer=134479&topic=1221265&ctx=topic Google Search help]
    [http://help.yahoo.com/kb/index?locale=en_US&page=content&y=PROD_SRCH&id=SLN2242 Yahoo Search help]
    [https://duckduckgo.com/params.html DuckDuckGo help]

  • How can I get my imac to open since updating latest itunes and syncing with ipad?

    I have just updated itunes to the latest version and the imac was syncing to the ipad, when it froze. The hard drive is pretty full, but I can't get into it to delete stuff. I have tried opening it by holding the shift key till the wheel stops spinning, to no avail.

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.   
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
         a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
    b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use either of the techniques in Steps 1b and 1c to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 10. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 10
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 11
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 12
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • How can I get my wired LAN to share my iMac's wireless internet connection

    Hi. (sorry for the long-winded posting below. I really struggled to explain what I'm trying to do, but would really appreciate any help from people who can recognise what I'm aiming for!)
    I've seen several postings about sharing internet connection, but none (I think) which sort my problem.
    I have a wired LAN with 3 Macs connected to a router, and the router to a cable modem and the internet. All working fine. All Macs have internet access.
    I'm considering ditching my broadband provider, and so looking for a replacement configuration, at least for the short term.
    So, I'd like to change the arrangement, connecting one of the Macs to the internet (through a local free WIFI hotspot) using it's airport card (that bit is done) and enable the other two Macs to share that connection via the router.
    I've turned internet sharing on, and share connection from Built-In ethernet, on the internet connected Mac. But whatever
    Has anyone got this setup working?
    PB
    Intel iMac 4,1 (early 2006)   Mac OS X (10.4.8)   1Gb SDRAM, 2GHz

    You can share a connection through the router or you can share a connection from the Mac via Internet Sharing, but you can't share an already shared connection.

  • How can I get a wireless internet connection on an original imac 233MHz G3?

    I have an original tray loading G3 233MHz bondi blue imac. I have a wireless router installed and would like to get wireless internet capability on this imac. An airport card cannot be installed. Is there any way it can be done?
    iMac G3 233MHz   Mac OS X (10.1.x)   tray loading

    This driver-less Linksys product is often recommended, to convert an older computer with an ethernet port to wireless connectivity.

  • My iPad keeps loosing the internet connection. All of my other devices work. Last time this happened, comcast charged $49 to fix it. They said that it's somethin that I downloaded. How can I get back my internet connection on my iPad ?

    My iPad keeps loosing the internet connection. Last time this happened comcast charged $49 to fix it. They said that the problem was perhaps caused by something that I down loaded. All my other devices still connected to internet. Tried to reset my settings. Still won't work. Any advice ?

    First, changing your DNS settings could not possibly have any effect on this problem.
    When you see an exclamation point in the Wi-Fi menu, from the menu bar, select
     ▹ System Preferences... ▹ Network
    Click the Assist me button and select Assistant. Follow the prompts. You may get a warning that Wi-Fi is not available, that you're too far from the base station, or that you're using the wrong password.
    Assuming that you've ruled out those possibilities, click the lock icon in the lower left corner of the preference pane and authenticate, if necessary. From the Location menu at the top of the window, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.

  • How can i get my Blackberry Internet Connection

    Hi, I need help setting up my Blackberry 9850 to access the internet. I recently bought my phone via ebay and installed a new OS for my service provider in Kenya. The phone was locked to Verizon wireless service and upon unlocking it i still have no idea on what to do. My service provider claims that the phone is branded and that i should contact Verizon to provide me with the designated pin to unlock the BB internet connection. Any help or advice will be much appreciated

    Here's the real problem.
    Many things (in particular data features) on BlackBerry devices are controlled by something called Service Books.
    The Service Books are pushed to the device from the service provider (carrier) once you have the proper BLACKBERRY Data Plan.  A generic smartphone internet plan will not work.
    However, if you are trying to use a Verizon BlackBerry on a service provider that does not support that specific device model number natively, you will need to MANUALLY load the generic Service Books from YOUR service provider.  You will need to search the internet to see if the Service Books are even available (which they most likely are not).
    Otherwise, you need to get a device that is NATIVELY supported by your service provider.
    BlackBerry devices work differently from other smartphones.

  • How can I get on the internet with my newly purchased used G5 Power Mac if my ethernet port failed?

    We just bought our son a used G5 Power Mac, but when we got it home and tried to hook it up to the internet, no luck. We changed ethernet calbes, tried plugging directly into wall cable (by-passing router), even tried to do manual config, but no luck. I took it to the Genius Bar today and they said the ethernet plug was broken, and they did not have anything for a "vintage" machine like this.
    The Genius Bar tech told me to buy a USB Network Adaptor, however no one (Best Buy, Radio Shack, even searched the internet) seems to have them for Mac. What can I do to get this puppy connected to the internet and how much would it cost? Did we get screwed?
    Here is the seriel # + info that the seller gave us:
    Seriel # G8******QPM
    Mac OS X 10.5.8 (9L31a)
    < S/N Edited By Host >
    The Powermac G5 Dual Core 2.3 is powered by a "dual core" 2 GHz PowerPC 970MP (G5) processor with dual optimized AltiVec "Velocity Engine" vector processing units (one per core), four double-precision FPUs (two per core) and a 1 GHz frontside system bus. It 's configured with 4 GB of DDR SDRAM, a 160 GB (7200 RPM) Serial ATA hard drive, a 16X dual-layer "SuperDrive"
    Connectivity includes USB 2.0, FireWire "400" and "800", Two DVI port, optical digital audio in/out, two independent Gigabit Ethernet ports. All of the "multiple core" equipped Power Macintosh G5 models have three open PCI-Express (PCIe) expansion slots. The Power Macintosh G5 Dual Core 2ghs uses an easy-to-upgrade "anodized aluminum alloy" case with a removable side panel for easy access to internal components. Likewise, it is divided into four different thermal zones with nine computer-controlled fans for optimum cooling. 

    Sorry, the 2ndlink should be...
    http://eshop.macsales.com/item/NewerTech/MXP2802NU2C/
    Fully Mac OS X supported with with on-screen
    menu set-up and full user manual.                   
    http://eshop.macsales.com/item/Asus/USBN10/
    OS Support Mac 10.4/10.5/10.6
    I don't have those exact models, but have seen others here use them.

  • How can I get back my internet explorer which has been removed when I have downloaded Mozilla Firefox?

    I want to download Mozilla Firefox as an optional browser as I can only access a website for work through this browser. However, when I downloaded MF, even though I tick that I do not want it as my default browser or homepage, it downloads, but has removed my Internet Explorer connection. This has happened a couple of times now and is very frustrating. I don't know how to get my IE back and keep the option of MF available. MF seems to automatically delete/remove IE when it is downloaded. I am using Windows 8. I would appreciate help and advice to correct this situation. Many thanks.

    Hi, Philipp,
    Thank you very much for your prompt reply and support. The IE icon disappeared immediately after I downloaded MF. I tried to download IE again but without success. In the end all my icons on my start page disappeared, although I do not think this was to do with MF. I had to resort to restoring my lap top to factory settings for the umpteenth time and I have now got IE back but no MF. I will keep your advice and will try again when I am feeling brave enough and have sufficient time to try and download MF again. I am not confident with technical problems and greatly appreciate your help and support.
    Kind regards, K.

Maybe you are looking for