How can I get Airplay to work with my 3TB Time Capsule and my two AV receivers

I have researched the net to death and my only solace is I don't appear to be alone. I have a 3TB Time Capsule that has a Denon and Pioneer receiver attached to it by ethernet. Also connected to the time capsule our three apple TV's. I can use airplay with my iPhones and iPads to the Apple TV but can't get either the Denon or the Pioneer to show up as Air Play options on any IOS Devices or my two Mac's.
I have the latest firmware on the Denon and Pioneer, the latest firmware on the Time Capsule and Mac's. I have tried power cycling, inserting a switch between the receivers and the time capsule but to no avail.
Any suggestions would be greatly

You can't officially as it relies on hardware.
A potential software solution is Airparrot.
http://airparrot.com
AC

Similar Messages

  • My iPod Classic is seen by Windows but not by iTunes.  I have reset it, gone to disk mode and it won't show up in iTunes.  There appears to be music on it in a file called MUSICSAVE.  How can I get this to work with iTunes again?

    My iPod Classic is seen by Windows but not by iTunes.  I have reset it, gone to disk mode and it won't show up in iTunes.  There appears to be music on it in a file called MUSICSAVE.  How can I get this to work with iTunes again?

    1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
    2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
    3. Check the USB cable
    4 Verify that Apple Mobile Device Support is installed
    5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
    6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
    7. Check for third-party software conflicts.
    <Link Edited By Host>

  • How can i get acrobat to work with windows vista

    How can I get adobeexportpdf to work with windows vista?

    But if, on the other hand you do mean Acrobat, please let us know what problem you are having.

  • Email messages from my icloud account update on all my devices showing if they have been read and if a reply has been sent.  This does not happen with my tinyworld (TalkTalk) email account.  Can I (how can I) get this to work with TinyWorld?

    Email messages from my icloud account update on all my devices showing if they have been read and if a reply has been sent.  This does not happen with my tinyworld (TalkTalk) email account.  Can I (how can I) get this to work with TinyWorld?

    You have to look at the email protocol being used.  the Apple email system uses IMAP, does Tinyworld use IMAP or POP?
    Does the email system permit delivery receipts to be requested?
    Just some of the things one needs to determine from the information provided by the email service provider.

  • How can I set up a guest WiFi network using Time Capsule and Airport Express extension?

    How can I set up a guest WiFi network using Time Capsule and Airport Express extension?

    Sorry, but it is not possible to "extend" the Guest Network using either wireless or an Ethernet connection.

  • How can i get airplay to work

    How can i get airplay to work

    From what Mac or iOS device? Have you gone through these steps? What happened when you try?
    Use AirPlay to wirelessly stream content from your iPhone, iPad, or iPod touch
    About AirPlay Mirroring in OS X
    Matt

  • How can I get Lion to work with label printer- Brother  QL 570 or Dymo 450 Turbo?

    I can't get Lion to work with label printers, either Brother QL 570 or Dymo Turbo 450. I want to uninstall Lion and use Snow Leopard unless there is a way to make Lion work with these devices. Any ideas?

    Dymo has released new drivers since Lion came out. Have you downloaded and
    installed them from the Dymo website?
    Some people have said that their Dymo label printers were set to off line by Lion, but
    worked fine after going to Print & Scan, selecting the Dymo printer, and making sure
    it was active/on-line. I had to do that with my Dymo 450 Label Writer.
    I cannot offer any tips about Brother, but you may wish to check their website
    for latest drivers.

  • How do i get airplay to work with apple tv

    how do i get airplay for ipad2 to work with apple tv?

    1. Insure home sharing is turned on both apple tv &amp; the iPad - same account
    2. When playing video or audio look for the little square usually lower left corner press it and select
    Apple tv!
    3. For mirroring double press home button (or multi finger slide up) scroll
    All the way to the left &amp; turn on AirPlay and choose mirroring!

  • I am college student and my professors require we use Turnitin however Turnitin does not support Firefox 4 how can I get it to work with Firefox 4 or how can I return to Firefox 3

    Turnitin will not work with firefox 4 how can I return to firefox 3 or how can I get firefox 4 and Turnitin in sync

    The Turnitin system requirements on mention Firefox 3. If it does not support Firefox 4 you can downgrade to Firefox 3.6
    To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
    You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
    To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
    For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles

  • Bought by a game on the apple store for an ipad but it has now frozen how can I get it to work with out paying again?

    Game through the apple store has now frozen on my ipad.  How do I get it to work again?

    Hi there,
    You may want to take a look at the troubleshooting steps found in the article below.
    iOS: Troubleshooting applications purchased from the App Store
    http://support.apple.com/kb/TS1702
    -Griff W.

  • How can I get Recipefox to work with the latest version (16) of Firefox?

    Recipefox worked on previous versions of Firefox. I could use the Grab It feature on many sites & easily retrieve recipes. Now, with the latest version of Firefox, it does not work on any of the recipe websites. Is there a more recent version of Recipefox that works with Firefox version 16, I am using 0.68. Does Recipefox get updated with newer versions of Firefox.

    Hi,
    You can try to right-click and '''Find Updates''' via '''Tools''' ('''Alt''' + '''T''') > '''Add-ons''' > '''Extensions'''. You can also '''Remove''' it, and search and install via the Search box on the top right or from [https://addons.mozilla.org/en-US/ AMO].
    [https://support.mozilla.org/en-US/kb/Using%20extensions%20with%20Firefox Using Extensions]
    If problems persist you can reset Firefox and start afresh with [https://addons.mozilla.org/en-US/firefox/addon/recipefox/?src=search recipefox].
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
    Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
    To Reset Firefox do the following:
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox" button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!

  • How can I get MagicTrackpad to work with Boot Camp and Windows Vista?

    Just installed Lion and then installed Magic Trackpad. Now I need to know how to get the Magic Tackpad to work with Windows Vista in my Boot Camp partition. Windows Bluetooth recognizes the Magic Trackpad but it says the device won't confirm the passkey. No passkey came with the Magic Trackpad and the option to not use a passkey still doesn't achieve connection with Windows. Suggestions/ comments, please.
    TIA,
    Picman

    UPDATE
    Just completed several lengthy sessions with Apple Tech Support (escalated to excellent Sr. Advisor). Bottom line is that there seems to be no answer to the problem of the Magic Trackpad not being able to maintain its pairing/connection with Windows (Vista in my case) or OS X (10.7 in my case) when switching Boot Camp partitions. In fact, when trying to re-pair it is necessary to remove the MTP batteries first. To pair at all with Windows requires the use of the Bluetooth passkey "0000" (not provided in MTP documentation). This achieves limited MTP/Windows functionality (cursor and "click" control only - with BC 3.1. BC 3.2 is supposed to provide more gestures, but I have not gotten there yet). Appears that when switching back to OS X, that passkey has remained with the MTP and is not what OS X is looking for, so it fails the connection. Removing/replacing the batteries probably dumps the passkey and allows the OS X connection. The Sr. Advisor says he sees this issue often (including with Windows 7) in their internal chat rooms, but no solution. He will be referring it to the engineers and will let me know the outcome. Meantime, assuming I keep the MTP, I'll have to resign myself to using a wired mouse when going to Windows (not a huge inconvenience, since it's only for Quicken; but the issue is worse than "in-elegant" for Apple!
    I am satisfied that I have obtained the best possible help from Apple on this issue. If anybody has more, please reply.
    Thanks,
    picman

  • How can I get dashlane to work with firefox

    i have added the extension but can not get a response from dashlane.

    I don't use Dashlane myself... Does their support article help?
    http://support.dashlane.com/customer/portal/articles/390903-how-to-verify-the-firefox-extension

  • How can i get javascript to work with version 18 - all boxes ticked but still problem

    I have WINDOWS 8 (for 2 weeks) , Firefox v18. I try to use a banking site that demands javascript but when I try to use the site, I get "javascript not working (or available).
    If I go into Youtube , any video I pick fails to run - instead I get flashing video screen
    I have set Javascript enabled but no difference.
    can anyone point me in right direction .
    I have reloaded Firefox and reset it - problem still exists

    hello, can you try to replicate this behaviour when you launch firefox in safe mode once? if not, maybe an addon is interfering here...
    [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

  • How to make UK Airport Express work with older US Time Capsule 5GHz?

    I just replaced two dead Airport Express units and the new one's fail to recognise the 5Gz network of my TC when try to set them up in AirPort Utility.  The other networks I have show up but since I reserve the TC 5Ghz exclusively for music streaming around house to AEX-attached speakers, not having the new models playing along is deeply frustrating. The TC was bought in US three years ago. The AEX are UK and brand new.  No problems at all with the other AEX units I have which all function perfectly.  These were also US models.  I'm fearing a change that prevents UK AEX from working with US TC 5GHz wifi.
    Any ideas?

    The US and UK will doubtless have different allowable 5ghz channels.
    Firstly set the country code in the TC if possible to UK although it might not appear on the list.
    Note to find the right page to enter country is simple.. start the manual setup.. in the find a setting box, type country.. the correct page will pop up. Change that to UK.. I suspect it cannot happen but try regardless.
    Someone else might like to comment if you can force the firmware upgrade to use the correct version from UK.. but maybe hard written into the firmware.. and only countries listed will be those in the region the airport is sold in. Time manufacturers got rid of regional distribution.. and just select anywhere in the world.
    If as I suspect no go on that one, just setup the TC to a wireless channel manually shared with UK. The problem now is the TC set to auto can choose a channel not allowed in the UK and therefore invisible to the UK Airport Express.. so lock the channel of the TC to one that is common.

Maybe you are looking for

  • Speed on 2.4Ghz network drops after enabling 5Ghz network?

    I've just noticed a weird issue with my dual-band AirPort Extreme router. I have a 30Mbps internet connection at home. If I don't enable the '5 Ghz Network Name', all wireless systems can access the internet at full speed. Once I do enable it, the co

  • How do I enable links to only open and not download all the time?

    I find in the Firefox browser that when I click on a link to view, listen, or watch the file automatically gets downloaded to my computer. I have gone into the preferences to disable this to view instead of save and this still continues. In other bro

  • How to change axis values in Numbers

    In v1.7 I have tried to change the axis values on existing charts but can't find how to do it... So I tried to create bar charts from scratch in order to rebuild the old ones with the new axis data but I can't find out how to set any of the axis valu

  • SAP NW 7.4 as java system sync with solution manager system 7.1 issue

    Dear all, I have installed SAP NW 7.4 system SP level is SP5 ,after that i have cheked in service marlket palce Now service market plkace latest SP level SP7. For manula downlowd( directly from service market place) is difficult for java system and i

  • Problem with navagation of forms

    Hi everybody I have a problem with navigation of forms I have two forms say a and b.In form a i have a button and i want, when i press that button the form b should open.I wrote when_button_pressed trigger for that button in form a as open_form('b');