How can I get airport to connect automatically to wireless network?

I temporarily switched from a DSL internet provider to a cable provider, and then back to my old DSL Internet provider. My g5 iMac computer connects to the network through a wireless Belkin router.
Since I switched Internet providers, every time I turn on my computer, it no longer automatically connects into the wireless network. Instead, to connect I now have to manually select the network.
I'd really appreciate tips on automating this step. My kids use this computer and due to parental restrictions, they do not have rights to connect to the network.

Hi there,
Strictly speaking changing how the internet is coming into the wireless router should not affect the wireless and how machines connect to it, but however to get you out of a hole I would say create a new Location for your home and start again.
Basically,Disable your wireless first, then in your network settings there is a drop down box at the top of the panel where you can change and create new locations. Create a new one, then select it and click Apply. Now enable your airport and connect to the wireless, once that is done you should be good to go.
Hope that helps,
Callaghan001

Similar Messages

  • Can't get Airport Express back onto my wireless network???

    Just returned from a trip where I had successfully used my AE in temp accommodation. Now I can't get the thing to rejoin my home network. I've reset it time after time, I go through Airport Setup Asst and get to the bit where it says it's updating the AE, congratulates me on setting it up - but the thing never rejoins and all I get is the amber blinking light. Once this happens it disappears off the network until I again, reset to factory settings.
    I have tried entering WEP equiv passwords as well as the ASCII but am not sure which one to use now - totally confused. I have another AE on the network which is working fine. I must be missing something unless the thing has gone u.s?
    Any ideas would be gratefully received.
    Cheers
    Chris
    iMacs, Intel 20 inch 2.0 with 1.5 gig ram   Mac OS X (10.4.9)  

    Hi Dan
    I have posted a new topic on this because I feel strongly about it.
    Here's a copy and paste of what I said:
    "I have spent literally the equivalent of 3 full days, configuring, reconfiguring, re-installing, setting up, un-setting up, scouring the internet, phoning people, taking trips to the Apple Store to find a solution. All a total waste of time. Why? Because until there is an update to cure the problem, the Airport Extreme BS will not function properly when used in an environment other than a basic setup.
    My network at home consists of 3 XP PC's, two Airport Expresses, and 5 Macs of various models. Until I removed an Express to use it on a trip, all of it worked well. When I came to return said Express into 'the fold' - that's when the trouble started. Mainly that, unless I had security switched to NONE, I couldn't connect the Expresses to the Base station, and my HP PSC2510 wireless printer would not connect either.
    If you are anything like me, you will have been through every single combination of setups, restarts, reinstalls you name it. I got conflicting info about the level of security from the Admin utility - sometimes it would report WPA, others it would say WEP.
    Cut a long story short, I finally returned the BASE Staion to the Apple Store and got a replacement. I had narrowed it down to that component only. Everything else on the network "seemed" to be fine.
    I wondered whether it was a solitary, faulty AEBS, and by replacing that, it would eliminate the problem. In theory.
    Brought home new AEBS but this unit also suffered collossally unreliable/unsuccessful connections from Printer, Expresses and one XP laptop.
    I have been to the Moon and back with Hewlett Packard trying to work out what could have happened - overnight - to this normally fail-safe wireless printer. No clues, all seemed to be set up correctly. But it WOULD NOT JOIN THE NETWORK!!!.
    So, as any mad (as in angry) scientist would do, I set up a "Control" experiment. Keeping everything as it was, all I changed was the AEBS. I swopped the AEBS for my older white AEBS (flying saucer). Guess what?
    Within seconds, all connected. Including printer, Expresses, and XP PCs.
    All working perfectly. Wrote down all the settings to check exactly the same as on the new (n) AEBS - identical. Swopped back - same problems. No way would it work.
    I am no Network expert but have a feeling that it has a problem managing/distributing/assigning IP addresses. Dunno, just a hunch because the printer would connect fine when connected to AEBS by ethernet cable.
    So I am now going to return the new AEBS to Apple and get a refund. I don't have time for this and I suggest not many people do.
    So if you have a problem like I did, it might be an idea to try another router or eliminate it somehow and check your settings.
    I hope this helps.
    EDIT:
    Looking again through a lot of posts on here - I would estimate that they are pretty much linked to the same problem - a few are reporting problems after connecting to different ISP then not being able to get it working again, some saying they can't get a single solitary PB to connect but al the others do. It all rings bells here! I am sure it's an IP problem (but what do I know) I would love someone to see into this. I doubt whether Apple will come up with something before Christmas - let's hope they prove me wrong eh?
    Anyone know of a good, reliable wireless router that also allows external HD sharing?
    Cheers!
    Chris"

  • How can I get Mail to stop automatically opening on startup of my MacBook?

    How can I get Mail to stop automatically opening on startup of my MacBook Pro? It's not in my startup items folder. But it auto-opens every time I boot up

    In System Preferences / General make sure the Restore Windows ...... is unchecked.
    Also uncheck in the shutdown dialog box

  • My itouch wont connect to the wifi but my laptop will. How can I get it to connect?

    My itouch wont connect to the wifi but my laptop will. How can I get it to connect?

    What happens when you ry to connect? Error messages?
    Does the iPod connect to other networks?
    See:
    iOS: Troubleshooting Wi-Fi networks and connections

  • HT4199 I just purchased a new iPhone 5 and I can't get it to connect to my home network, which is ATT U-verse. Can someone help me?

    I just purchased a new iPhone 5 and I can't get it to connect to my home network, which is ATT U-verse. Can someone help me?

    Apps and music aren't part of the backup.  App data is http://support.apple.com/kb/HT4946

  • How can i get an iphone 3gs unlocked to any network?

    how can i get an iphone 3gs unlocked to any network?

    Only the cell carrier to whom the iPhone is locked can authorize an unlock, so you will need to contact the carrier. Note that if the iPhone is locked to AT&T, they will not unlock an iPhone at any time for any reason.
    Regards.
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

  • How can i know the exact model of my wireless network card? macbook pro 13"

    how can i know the exact model of my wireless network card? macbook pro 13"

    I think the best you can do is use the System Information application (Utilities Folder), looking in the wireless section.
    charlie

  • How can I get files to open automatically upon download?

    I would like files I download to open automatically and for the download window to be turned off. I know how to turn off the download window, but cannot get files to automatically download.

    Hi JJMack. Thanks for getting back to me.
    I think I've created confusion about what I want. All I want is to end up with a file that is flattened so that I can save it as a tiff without getting a warning that it contains layers. Please correct me if I’m wrong but I’ve always assumed I should always flatten a file before I save it as a tiff unless I specifically want to retain layers or transparency. I’m only talking here of files that open with a single layer: ie. Layer 1. I assume that if I don’t flatten such files the resultant files will be unnecessarily big?
    The only reason I keep saying I want a Background layer is that I know that a flattened file will only have a Background layer. I don’t have any desire for a Background layer per se. I certainly don’t want to add extra layers - quite the opposite.
    So perhaps the question I should have asked should have been:
    How can I get files to open 'ready-flattened' by default so I can save them directly to tiff without having to manually flatten them every time?
    Cheers

  • How can i get my iPhone to automatically read my text messages?

    like the iphone ads show, how can i get Siri to automatically read my text messages as they come in?

    Enabling preview for text messages will allow SIRI to read the text messages during a locked screen, as long as Siri is turned on for lock screen use.

  • I just bought an IBook G4.. perfect condition, but I can not get it to connect to my wireless.

    I just bought an IBook G4 in perfect condition, but I cannot get it to connect to my wireless. The IBook came with all the original cables, CDs, Books and packaging.., Like I said perfect condition. It was sold as having Airport Extreme, but I don't know how to make sure it is Airport Extreme.
    I know the password is correct and the wireless system works on my other computers (PCs) . It picks up my wireless network, but I get a prompt that tellls me the password is not correct.  I have set it to WAP... I tried WEP but was told it should be WAP... I even took it to my son's home this weekend and got the same results from his wireless connection.
    Any suggestions would be appreciated

    Sam,
    Your iBook is younger than mine. I have an iBook G4. 800MHzPower PC G4 processor.256K level 2 cache. 256MB of DDR SDRAM; supports up to 640MB.
    This unit did NOT have an AE card preinstalled. I purchased that at an Apple Store and they did the install for me. The iBook ran OS 10.3.3 out of the box. I know it was on the Internet via ABES g standard on a dial up AOL connection thanks to Tesserax on the Airport forum.
    My iBook is now running 10.3.9. It was on the Internet with 10.3.4 mayb even 10.3.3. Can't remember. The only reason I went to 10.3.9 was for a printer istall.
    We purchased an iBook G4 exactly like yours for a friend. There was a noticible speed bump on that one. I set it up for our friend and there was no difficulty getting on the Internet with it here at my home or his.
    Have you been able to connect to the Internet at a hotspot?  Just trying to cover all the bases.

  • How can I get my iPhone to be recognized in network preferences as it has recently disappeared? Running snow leopard on MBP with 5.1.1 on iPhone?

    I've been tether in my iphone to MBP via USB for a while.  Tried yesterday but my iphone no longer appears in network preferences.  How can I get the iphone to appear as a selection in network preferences?

    tmaag wrote:
    iOS looks for the strongest, fastest, most consistent connection.
    If that's not yours expect the other to come up first.
    Note even a 4G or LTE could be faster then a WiFi.
      if so it will default to that.
    Yes, thanks. Seems logical.
    But you know the annoying thing is... The really annoying thing, is that my network runs on a £250.00 Apple Time Capsule, but my neighbours runs on the free router he got with his broadband package...

  • The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on that  wifi network

    The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on my school wifi. I have an iPhone 4S on AT&T and iOS 7.04

    In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
    So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
    If you are not able to access this camera from the local network, then this should be troubleshot first.

  • HT204014 How can I get spotlight search to work over a network running OS X Server?

    I have installed OS X Server on an iMac to share its files over a network.
    I can access the files fine, but if I try and search the shared folders from another Mac on the network it yields no results.
    How can I get search to work as well as it does on the files on local disks.

    Spotlight searching of shared volumes works for me using OS X 10.10.3 Server and OS X 10.10.3 client, as follows:
    If I use Spotlight to search for some content "Aaron Aardvark" the file that contains this text does not seem to show up in the immediate results, but if I select "Show All in Finder" and switch from "This Mac" to "Shared" the file "untitled text.txt" that contains it is listed.
    In the past Spotlight was responsible for bringing servers to their knees, so I suspect that the above two-step process is a way of limiting server searches to cases where it is actually required.
    Server 4.1 (OS X 10.10.3) seems to add the extended attributes needed to allow Spotlight to index sharepoints:
         test_server3:~ admin$ ls -el /Volumes/Server\ 3\ Users/
         total 0
         drwxr-xr-x+ 4 admin  staff  136 30 Apr 17:02 Server 3 Users
          0: user:_spotlight inherited allow list,search,file_inherit,directory_inherit
         test_server3:~ admin$
    but in the past, e.g. Snow Leopard server, you could choose whether or not these attributes were set or not. IIRC  Snow Leopard clients would always include server volumes in Spotlight searches, causing significant slow-downs on the client, so a lot of sysadmins, myself included, chose not to enable it.
    C.

  • Airport is connected to my wireless network, but can't connect to internet

    I'm a first time mac user. Earlier today our power went out, and when it came back on, our wireless router reset. We currently have 4 computers that we connect to the internet; 2 of them are Macs, 2 of them are PCS. Both of the PCs are connected to the internet with no problems, but both of the macs refuse. I've run diagnostics on both computers, and it says it can't find an error. I've contacted my provider, and my internet service is not the problem.
    It keeps saying that AirPort is connected to the wireless router (my wireless router), but cannot connect to the internet. I've been trying to fix this for over 3 hours now. I work nights, and need my computers for work, so as it sands i'm currently losing money over this Can anyone help please?

    Welcome!
    Can you clarify what model iMacs you have? This forum is for the older G4 iMAcs with the articulated monitor and a hemispherical base. However, due to poor forum labeling, many people with newer iMacs are lured to this area. Reset procedures may vary with model so it's important we know which variant you have. Use "About the Mac" in the Apple menu to find your processor type--that should be enough for now.
    Once you you figure out the processor type, append it to the equipment info in you profile, Example: it now says "iMac." If you find yours has a G5 processor, change it to read "iMac G5." That will save you a lot of keystrokes down the road.

  • IBook has stopped connecting automatically to wireless network

    I just got my iBook back from repair at Apple (a display problem), and now I have two minor, but annoying, problems. First, the computer no longer automatically connects to the wireless network at my work, but every time the computer goes to sleep or I restart it I have to pull down the AirPort menu and select the network to join. I don't have to enter a password, I just have to select the network on the menu.
    The second problem is that I used to have the computer log me out whenever the screen saver came on (after 15 minutes) so if I left my office for a while nobody would be able to access it without the password. This isn't working now and I don't know how to change it.

    Hi, I have tacked on to this thread as I have the same problem... I can't connect and have get the spinny ball when I try to open internet connect.
    This happens every time I update, and I too usually fix it by updating the keychain. However, this time the box only popped up as I was restarting and i couldn;t click it in time, and it hasn;t reappeared since.
    How can I fix this?

Maybe you are looking for