How can I get an AIR application to a video output via DeckLink card with alpha channel?

Hi there!
Anybody knows how to get an AIR application to a video output via DeckLink card with alpha channel?
The reason is because we want to develope tv show games with air.
Thanks.

See if these have iMac Nvidia drivers:
http://www.laptopvideo2go.com/drivers/

Similar Messages

How can i get a java application

how can i get a java application on my mac pro?

I'm not sure I understand the question. If the application is a standalone applet, you download it as you would any other application or file. If the applet is embedded in a web site, just go to the appropriate web page.
If you can provide more specifics about what it is you are trying to download/accomplish, perhaps we can be of more specific assistance.
Regards.

How can I get rid of shimmer effect in videos that I create in iMovie?

How can I get rid of shimmer effect in videos that I create from photos in iMovie?

Well, not sure - so exactly what resolution do you use to shoot? Go in your camera settings and check. And, is there a settings to choose for regular/extra/fine/superfine quality? I shoot at the highest quality - period. My size/resolution is either widescreen or larger than what I need for the movie. My TV is HD 720p - that means the screen will display 1200 x 720 pixels in HD; if you have a 1080p, it'd be 1920 x 1080. So shoot in a size a bit larger than that because they can be adjusted down without any quality loss, but can't be made larger without significant loss of quality.
But,again, the problem usually doesn't start until you add movement, but camera quality has something to do with it as well. I know that a previous camera I had was not as good and a lot of my slideshows/movies didn't come out as perfect as I would have liked. So I bought a more expensive camera - shoots in full 1080 HD and I haven't had a problem since.
As for exporting a slideshow: finish it in Photo to Movie and export to desktop at highest quality (will take a while). Here is a screenshot of my export settings:
Once done, you can simply choose that movie by going to "import movies" in iMovie and navigating to the location (I usually save to desktop - easy to find).

My ipad2 is only allowing me to email 30 sec clips of a video that I made which is saved in Photos on my iPad2. How can I get it to email the entire video?

My iPad2 is only allowing me to email 30 sec clips of a video that I made which is saved in Photos on my iPad2. How can I get it to email the entire video?

It is most likely a size issue. I have a 3 minute video that's almost 200 megs. If you're just trying to show it, you might consider youtube. if you're wanting to upload/share it then you can try things like Dropbox or other onlilne file sharing programs.

How can I get my new ipad 4 to read my compact flash cards? If not can I download the images directly from my camera?

how can I get my new ipad 4 to read my compact flash cards? If not, can I download the images directly from my camera?

Tom, thanks for your quick reply. I'm a commerical photographer using Canon 5D mk2's mostly and have in the past just downloaded images to a mac book for backup. I really liked the compact size of the Ipad and just got the retina model with the camera connection kit and seem to be hearing that CF readers can't be used with it b/c they draw too much power. Seems like I remember reading I could use a cord that might have come with my cameras to download directly to the Ipad. I haven't tried it yet as I can't find the connection but then you just said it can't be done?
   I'm COMPLETLY lost as to your "first pluging in a flash drive to my computer, advice. Do you mean Ipad when you say computer? "then put your movie/photo files into the folder." HOW????????
     Then plug it into the Ipad??????     TOTALLY lost.
Also your saying just "do a google search for a reader doesn't work b/c NONE are able to work with the newer Ipads b/c they use TOO much power or so everyone says everyone that have tried.
   Hope you can help a little more b/c I'm really getting frustrated with all the conflicting advice!
Thanks, Dennis [email protected]

I have an IPone 4, there is an add video for Capital one that keeps coming up on its own... ive deleted my history and cookies and this video keeps taking over my phone. how do i get rid of it? the video is of a man with a puppet and the puppet is singing

i have an IPone 4, there is an add video for Capital one that keeps coming up on its own... ive deleted my history and cookies and this video keeps taking over my phone. how do i get rid of it? the video is of a man with a puppet and the puppet is singing a song while he is checking his phone. how do i get rid of it????

If it happens again the make sure that you aren't suppressing website colors.
Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
*Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
*https://support.mozilla.org/kb/Options+window+-+Content+panel
*http://kb.mozillazine.org/Website_colors_are_wrong
*http://kb.mozillazine.org/Websites_look_wrong

How can I get the web application's context root?

I have a web application, which is defined in Tomcat's server.xml:
<Context path="/cbes" docBase="e:\work\GM\code\CBESCurrency" debug="0"
reloadable="true" crossContext="false"/>
And I hava a servlet in this web application.
How can I get the context root of the web application?
in this example: reture should be "cbes" or "/cbes"
how?
thanks alot.

getContextPath() in javax.servlet.http.HttpServletRequest

On the iPad Air, how can I get the lock screen to stay on longer like it was with an iPad 2?

Since getting an iPad Air the lock screen does not stay on but for a few seconds after startup, how can I adjust the time of it? It used to stay on with my iPad2.Thanks

I guess I never noticed that the swipe to open doesn't stay on very long. But, I've not found this to be an issue as I usally swipe the moment I have the option to swipe. It's been so long since I had a 2nd generation iPad that I honestly can't remember if it stayed on longer. It's still not a problem for me. There is no setting which will let you keep the swipe to open on longer, so it would reasonable for Apple to say there is nothing wrong with your iPad

I don't have facetime on my phone. How can I get an facetime application.

I don't have any facetime on my phone. How can I get an application for this. As I browse the internet, I found out that apple products bought in UAE are restricted in facetime. Is this true?

FaceTime may not be available in certain countries. Find more information about what's available in your device's region of purchase.
Clicking that link will show that FaceTime is not available in KSA or UAE, this is specifically due to laws in those countries. If you do not like that, talk to your government about changing their policies/laws.

How can I get my stereo to play music videos from my Ipod Nano? It comes up with the message "This device not supported". Strangely my Iphone IS recognised. The stereo, Ipod, and Iphone are less than 4 months old. Any suggestions welcome!

How do I get my Ipod to play music videos through my theatre system? I keep getting the message "This device not supported". My theatre system WILL recognise my Iphone however. The theatre system, Ipod, and Iphone are all less than 4 months old. Any suggestions welcome!

Check with the theater system vendor and see if their system is compatible with the Nano. The resolution on the Nano may be too low for the system.

How can i Install an AIR application on USB drive?

I am new to AIR application development.I want to develop a application which could run from an external USB drive(flash drives). I wanted to know if it is possible to install the application on the USB drive.If so what is the procedure.

That is completely false about Windows. Windows does not automatically get infected with anything the minute you connect it to the net. My god where do you come up with that? I run several Windows PCs and none of them run any malware or anti virus programs and none of them have ever been infected with anything and they are always connected to the Internet. I'm typing this reply from one such Windows PC.
It's all about how you use your computer not the OS it runs. Sure Windows is a much bigger target for the scum of the world to attack as it has 90% of the market so the people that write the viruses and malware programs do it for a system they have a better chance of infecting.
But to ***-U-Me that just because you have Windows and you go to the Net that it will get infected with something is just a Bold Face Lie. And I suspect you know that.
So why not post truths instead of the Lie in your post.
By the way Mac's can also be infected as has been proven recently. So no matter what OS you run you can get infected. Now that is not a Lie.
arthur wrote:
The two responses above are right- there is no Windows Explorer version that will install in Mountain Lion.
There are a couple of things you can try that might work, short of installing Windows on your machine, either in a virtual machine (like virtual box or parallels) or with bootcamp. Personally, I hate either of those options, just because windows is such a magnet for malware and viruses. The second you expose windows to the internet it becomes infected.

How can I get a downloaded application to run when security settings won't allow it?

I am trying to run an application today that I downloaded from Safari. I run this every single business day by control - clicking to open it in Finder. Today it won't allow me to open it all because of my security settings. When I temporarily remove my security settings it still will not let me open it. How can I run an application every time, when I want to run it, regardless of my security settings?
I am using Safari, Mavericks, and MacBook Pro.

Your control is allowing the app to run or not. I'm not sure what other type of control you could possibly mean since any app, once running, does whatever it does; you can't control any app past that point.
If you prefer not to disable the settings in the System Preferences, then right click on the app and choose Open. That will allow that app to run while still leaving the basic security feature on. You only need to do this once. The app will be assumed as trusted after that.

How can I get HyperTrend to display the numeric value output of a CHOOSE statement?

I have non-linear values I need to display on a HyperTrend graph. I'm currently converting the input raw signal to a Units (Engineering) value and then looking up the actual value (from a calibration chart) using a CHOOSE statement in order to display the actual value on a panel, but I need to display the values output by the CHOOSE statement on a HyperTrend graph, along with other similar values.
How can I do this?

I have non-linear values I need to display on a HyperTrend graph. I'm currently converting the input raw signal to a Units (Engineering) value and then looking up the actual value (from a calibration chart) using a CHOOSE statement in order to display the actual value on a panel, but I need to display the values output by the CHOOSE statement on a HyperTrend graph, along with other similar values.
How can I do this?

How can I get the sounds , like clicking,etc to work on iPad 2 with IOS 5. In the settings all sounds are on and the volume is high but I don't get a sound.

After downloading IOS 5, I no longer get the sounds on my IPAD 2 to work. They are on in settings and the volume is at maximum, but the sounds such as keyboard click, email sent etc, donor work.
Any suggestions.
Regards

Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

How can I get my iPhone 3GS to recognize my AT&T SIM card after upgrade to iOS 5.1?

I upgraded my previously-unlocked iPhone 3GS to iOS 5.1 today, from iOS 4. I hadn't upgraded the OS in awhile (since the phone was unlocked before a trip overseas).
iTunes says: "There is no SIM card installed in the iPhone you are attempting to activate. Please disconnect and insert a SIM card in the iPhone." I tried taking out and reinserting the SIM card, but that didn't help. It seems that I cannot restore to factory settings now, since iTunes doesn't think my phone has a SIM card and so won't connect to my phone at all.
I realize now that I should have restored to factory settings before upgrading, but given that I did not, how can I fix this retroactively?
Help?!
Thanks!

I did.
I've connected to the M-Cell for a few minutes once. It dropped the one call I tried to make, and my phone hasn't reconnectted since. My roommate has the same phone. We have the same thing happening.

How can I get an AIR application to a video output via DeckLink card with alpha channel?

Similar Messages

Maybe you are looking for