How can I get an exported iBook to open on the first page?

After exporting the latest version of my iBook, when I open it in IBook reader on the iPad, it opens in some random spot in the middle of the book. I've tried doing a final save while on the Intro Media page before exporting but it still opens the first time somewhere in the middle. Any suggestions?

>What I do <clip>duplicate Version 4 and then rename it as Version 5
Those are certainly clones. Don't do that.
See -How do I clone/copy an existing book for reuse to make another?- in iBA Tips and Tricks 01.

Similar Messages

How can I get a new tab to open to a specific page?

I use speed dial add-on and have for a few years. I had an issue with firefox yesterday and had to reinstall it and lost all my settings. I added the speed dial add-on and tried to set it as my home page, but when I restart instead of going to speed-dial it goes to a new tab page and the homepage has changed in the options setting. No matter how many times I try and switch startup page/home page to speed dial, it keeps changing back to new tab.

If you do not keep changes after a restart or otherwise have problems with preferences, see:
*http://kb.mozillazine.org/Preferences_not_saved

How can I get Firefox to remember my open tabs the way it once did?

In the past, each time I reopened Firefox, the tabs which I had had opened opened back up. But the other day I accidentally installed a "Radio.... something or other" toolbar while trying to listen to an ESPN press conference. After I added that toolbar, the next time I opened Firefox, none of my tabs re-opened, so I uninstalled the toolbar, but now, when I close Firefox, with several tabs open, and then re-open it, it does not remember the previously open tabs.
Thanks,
Doug Weiskopf

hello doug, this toolbar was probably adware which still left remnants on your system, so please perform all these steps:
# [[Reset Firefox – easily fix most problems|reset firefox]] (this will keep your bookmarks and passwords)
# afterwards go to the firefox menu ≡ > addons > extensions and in case there are still extensions listed there, disable them.
# finally run a full scan of your system with different security tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] and [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner] to make sure that adware isn't present in other places of your system as well.
[[Troubleshoot Firefox issues caused by malware]]

How can I get back into my application aftermath invoking Start up page of index.htm ?

Gorgeous Hello All,
If anyone of you can please provide me a solution for the following, will help me in plentious and galore.
Am using Adobe RoboHelp, Version 10 and IE version being 10.
A hurdle :-
I have a application which has been developed in ASP .NET, Version 4.0. Help link has been created in this application wherein here the Start up page of index.htm has been linked to be read from the RoboHelp local project folder\!SSL!\Multiscreen_HTML5\desktop. All are working absolutely fine except when
I login into the above-said application -> click on the Help page -> the index.htm opens with Contents, Index, Glossary -> Am able to successfully perform any task by respective clickings
-> But I am not able to get back into my application when I click on the IE provided Back button (Alt+Left) -> Any amount of invoking Back button makes the system getting looped into this Start up page of index.htm only -> When I Close Tab (Ctrl + W) or Close ( X ) -> The window session gets closed and I have to repeat all by relogin once again.
How can I get back into my application aftermath invoking Start up page of index.htm ?
(I can always get back into the application easily by erasing those parts in the url which refers to this RoboHelp linkages – but this certainly looks non-polished work)
Help Please
Cheese – Vipin Nambiar, Bangalore

Hey Jeff, I used Internet Explorer 10.0.9200 and Google Chrome 26.0.1410. Alas - it is the same behavior.
(But Jeff : When I used Microsoft HTML Help as primary layout to generate chm file , My Help when launched from my Application opened in a new browser window and when I closed this Help browser window did not close my application. Looks like need to write few liner code to get this issue settled )
Thanks Indeed of lots for your concerns Jeff !!!

How can I get all tracks from an album into the album in my library?

When importing the albums from a folder, the tracks for some of the albums were split up. How can I get them in one?

Hello JudyD276
The article below will give the steps to get the songs grouped together for you.
Why aren't songs with the same album art grouped together?
http://support.apple.com/kb/TS1468
Thanks for using Apple Support Communities.
Regards,
-Norm G.

My friend synced a video to my ipod but it erased all my data on my ipod,but i cant figure out how to load my old libray back without deleting the movie. my friend cant tell me the password. How can I get my old library back without deleting the movie?

My friend synced a video to my ipod but it earased all my data on my ipod,but I can't figure out how to load my old library back without deleting the movie. My friend shares a family account so she can't tell me the password. How can i get my old library back without deleting the movie?

Linnwarner wrote:
She does have the right because she bought the movie.
Not true at all.
You only buy the right to your own personal use.
You do NOT have the right to distribute to others.
This is illegal. There is no doubt about it

How can I get my books that I download from the Library that are WMA files into my I tunes so I can listen to them

How can I get my books that I download from the Library that are WMA files into my I tunes so I can listen to them. They have a ton of books but I can only listen to them from my windows media player and I wouldlove to download to my I pod but I have tried everything I can think of it they won't go over. Someone said all I had to do was copy them over and they would convert but I can't even get them to copy. Thanks.

Well it started happening AGAIN with my 2nd IPod. No matter what I did, it Itunes would NOT restore it!
I finally installed Itunes on my hubby's PC at work and managed to get it restored there.
Apparently, there must be some sort of compatibility issue with the windows version of Itunes and some other piece of software on my pc.
And one more important thing! I had to follow the instructions in the other thread that talks about how to correctly uninstall itunes and quicktime, in order to completely eliminate ALL traces of my "first" ipod's existence so it wouldn't demand that I restore it.
I think the software got "confused" and thought when I connected my 2nd ipod, that it was the 1st and that it still needed to be restored.
Basically, this is just POORLY written and POORLY tested software!

How can I get a file to copy all of the files in a directory except itself and the source of the copy function will be the directory the final program is in?

How can I get a file to copy all of the files in a directory except itself and the source of the copy function will be the directory the final program is in? This application must be in Lab View 8.

you mean something like this (see below)?
Now you may have to implement code to check if the destination folder exists and to create it, etc. But if you use the Front Panel Control to select the destination folder, it should be okay.
Not the best implementation, mind you but you'll get the idea..
Message Edited by JoeLabView on 04-18-2007 03:43 PM
Attachments:
copy folder contents.PNG ‏10 KB

When I save my book in iBooksAuthor as .ibooks, it does not open on the Intro Media page. How can I be sure it opens on the first page?

When I save my book in iBooksAuthor as .ibooks, it does not open on the Intro Media page. How can I be sure it opens on the first page?

hello suffaman46, please refer to the documentation provided by yahoo for this issue: http://help.yahoo.com/kb/index?locale=en_US&y=PROD_ACCT&page=content&id=SLN2896

How can I get Windows (v7 x64) to open in Dreamweaver (CS5) if I right click it?

Hi
How can I get Windows (v7 x64) to open in Dreamweaver (CS5) if I right click it?
None of the normal mechanisms of setting an application to be the DEFAULT application for the .HTML file type seem to work...
Extremely irritating.
J

Jon Fritz II wrote:
So when you right-click an .html file and choose Open With, what are you seeing?
Is the check box for "Always use the selected program to open this kind of file" checked?
A list of various "recommended applications" but not including Dreamweaver. It's not in the list of Other Applications either. And if I browse for it, my selection of dreamweaver.exe is flatly ignored without message.
>Is the check box for "Always use the selected program to open this kind of file" checked?
Jon Fritz II wrote:
So when you right-click an .html file and choose Open With, what are you seeing?
Is the check box for "Always use the selected program to open this kind of file" checked?
A list of various "recommended applications" but not including Dreamweaver. It's not in the list of Other Applications either. And if I browse for it, my selection of dreamweaver.exe is flatly ignored without message.
> Is the check box for "Always use the selected program to open this kind of file" checked?
Yes.
J

HT1338 How can I get my photo to work again? the app will not open on my desk top any more. I can not dave my photo on my desk top

How can I get my photo to work again? the app will not open on my desk top any more. I can not dave my photo on my desk top

Hello, Cubby21.
Thank you for using Apple Support Communities.
Here are the best resources for troubleshooting issues with Message.
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
iOS: Troubleshooting Messages
http://support.apple.com/kb/TS2755
Cheers,
Jason H.

How can I get a list of active savepoints for the current session?

Hi,
In Oracle Applications, we are getting the following error while performing ROLLBACK to a Savepoint.
"Unexpected Error: ORA-01086: savepoint 'PTNR_BULK_CALC_TAX_PVT' never establishe d ORA-06510: PL/SQL: unhandled user-defined exception"
So how can I get a list of active savepoints for the current session?
Could you please also let me know if there is any better way to debug this issue.
Appreciate any quick response as the issue is very critical.
Thanks,
Soma

user776523 wrote:
Hi,
In Oracle Applications, we are getting the following error while performing ROLLBACK to a Savepoint.
"Unexpected Error: ORA-01086: savepoint 'PTNR_BULK_CALC_TAX_PVT' never establishe d ORA-06510: PL/SQL: unhandled user-defined exception"It sounds like there's an execution path in the code where the SAVEPOINT is never issued.
There is no way to get a list of active savepoints. Is this your code or a "canned" procedure? If it is your code you can go through the code looking for answers, possibly tracing execution using DBMS_OUTPUT.PUT_LINE or writing messages to a log table. If its a "canned" procedure you may need to open an SR with Oracle

When I try to activate my cs 3 premium production, I get a message saying NO CONNECTION. Everything is in order though. How can I get an activatioon number other then trough the web??

When I try to activate my cs 3 premium production, I get a message saying NO CONNECTION. Everything is in order though. How can I get an activatioon number other then trough the web??

Sign in, activation, or connection errors | CS5.5 and later, Acrobat DC

When printing two-sided from my Mac on landscape A4 with 2 columns, how can I get my HP Photosmart 6520 to print the same way up?

When printing two-sided from my Mac on landscape A4 with 2 columns, how can I get my HP Photosmart 6520 to print the same way up?

Or, it is set the other way around (which makes more sense). Even though you are in Landscape mode, it is binding on the Long Side of the paper. Since you are in Landscape, you would want it to bind on the short side.
Think of the Binding like a Book. How would you flip the finished pages to read the “book.” Where it would be bound in the imaginary book is how you want it to print.

My Mountain Lion app failed while downloading, and now I can't download it without repaying for it. How can I get my access code to work/download the app?

My Mountain Lion app failed while downloading, and now I can't download it without repaying for it. How can I get my access code to work/download the app?

Welcome to Apple Support Communities
Open App Store, select Account in Quick Links and press Show hidden purchases. If OS X isn't there, http://www.apple.com/support/mac/app-store/contact

How can I get an exported iBook to open on the first page?

Similar Messages

Maybe you are looking for