How can I get an FQDN to point to a local IP internally (I am concerned about messing up exchange)

My DNS server on SBS2008 thinks the domain is ".ourname.local" and so if I ping the server it will come up with server.ourname.local.  Our email however is [email protected]  This has all been working great, but I need to a fqdn
resolve externally to our public IP address and internally to a specific LAN IP such as:
host.ournamegroup.com -> external IP (when resolved outside of our DNS)
host.ournamegroup.com -> internal IP (when our SBS DNS server resolves it)
I've tried creating an A record for "host.ournamegroup.com" and it creates it, but pinging it still gives the public address unless I add "host.ournamegoup.com.ourname.local" which isn't at all what I want, but does ping the correct internal
address.
Someone mentioned a split DNS but I'm not sure what that is.  I am thinking I could create a "ournamegroup.com" zone on the DNS server, but will this do what I am trying to do and more importantly, will it mess up anything with exchange?
Thanks,
Alan

I wouldn't recommend creating a zone for "ournamegroup.com" on your local DNS since that would then make it authoritative locally, and any local DNS requests relating to your domain (for instance trying to access your website at
www.ournamegroup.com) would be handled locally rather than referring to your public DNS. So it would then either fail to find the record or you'd have to setup those records locally and manually keep them in sync.
What you could do would be to create a zone for host.ournamegroup.com on your local DNS, and then create an A record with no name (so it uses the parent domain name) pointing to your servers internal IP address.
Then anythingelse.ournamegroup.com will continue to be resolved by your public DNS servers, but host.ournamegroup.com will be resolved on your local network to your local IP address. Obviously if you have any other records under host.ournamegroup.com then
it gets little more complicated, as you would potentially need to recreate those locally to match what they resolve to publically, otherwise any local lookups for those will fail.

Similar Messages

  • CS3: Rotated page item: How can I get the top-right point

    Hi
    I have a rotated page item. Now I should have the top-right and the bottom left point. If I get the rectangle of this page item I only have the top-left and the bottom-right point. And I can read the rotation angle.
    - How can I get the missing points?
    Thanks
    Hans

    Algorithmically speaking (ie, this is NOT real code), isn't it just something like:
    if page.rotationAngle == 90 then
    origTopLeft = (newBottomRight.Y, newTopLeft.X);
    else if page.rotationAngle == -90 then
    origTopLeft = (newTopLeft.Y, newBottomRight.X);
    else if page.rotationAngle == 180 then
    origTopLeft = newBottomRight;
    else
    origTopLeft = newTopLeft;

  • How can I get firefox to execute perl scripts from local files

    I have created perl scripts on my local host (file type ".pl").
    In MS Windows I have associated that type to a perl interpreter installed on my local host.
    IE allows me to create links to them and to execute them (after asking for permission).
    How can I get firefox to do the same? It doesn't seem to allow me to add application types, only to change those that are already defined. As a result, in firefox, they just show up as text, instead of being executed.

    First guess is that you did not use an .html extension on the file. The file may well be ''name.html.txt''
    * see http://www.bbc.co.uk/webwise/guides/file-extensions
    *http://windows.microsoft.com/en-gb/windows/show-hide-file-name-extensions#show-hide-file-name-extensions=windows-vista
    Forum Note
    This is normally offtopic for this forum. I say normally because now we cover webmaker questions. I wonder if this is therefore on topic as a webmaker question?
    I have tagged with webmaker-contribution

  • How can I get the Microsoft enhanced Point and Print compatibility driver installed on Win7 LC master?

    We recently migrated from a Windows Server 2003 to Windows Server 2012 print server. When recomposing a linked clone pool with the old 2003 server, drivers were taken care of for the printer when the user printed for the first time after desktop recompose. With 2012, any printer using the Point and Print driver doesn't seem to obtain the driver again from the 2012 server. All of our clients are running Windows 7 which means the Microsoft enhanced Point and Print compatibility driver is not installed in the OS natively.
    I apparently need to figure out a way to get this installed on the host image so it trickles down to snapshots when recomposing the linked clone pool but I haven't been able to dig much information on doing this. Does anyone out there have any insight on how to accomplish this? If I recompose a pool now for a user who is using a new Point and Print driver, they get the following message that is resolved by removing the printer from their account and re-adding it:
    "The 'Microsoft enhanced Point and Print compatibility driver' printer driver is not installed on this computer. Some printer properties will not be accessible unless you install the printer driver. Do you want to install the driver now?"
    I figured the easy solution would be to just install a printer using the Point and Print driver and then remove it...leaving the driver behind (unless it cleaned up after itself). The problem with this is in my testing, even after removing and re-adding a printer that set off installation of this Point and Print driver on the client, any other printer that was using it still required the remove/re-add process in order to work, else I got the same message. That tells me that the driver may be custom for each printer installed?
    Color me a little confused. I do NOT like the way that Server 2012 handles printers. I've come across a few other issues as well (such as duplex capabilities not being remember on the print server for a printer) that I never had with the 2003 server.
    Thanks!!

    I was able to get it to work using your instructions off of here and your other thread
    Thank you!
    Chris
    http://social.technet.microsoft.com/Forums/en-US/864553c2-c8ff-49d2-bd48-eb7b47381111/windows-2012-print-server-problem-with-xp-clients?prof=required

  • How can I get iPhoto to work with Lion? It comes up with an error about not working with this version of MAC os.omes up with an error

    Iphoto was working fine until I downloaded and installed LION. Now I get  a problem message to check that iphoto is compatible with this version of MAC OS X.
    I always download software updates.

    Have put iphoto into trash and tried to re-install it from cd, but although it is there on the list when I try to install, it is not in bold and does not permit me to tick it.
    I have been to the app store and it tells me that iphoto is on my computer.

  • How can I get more than 5 items in my Recent Projects list?

    After a rather horrendous incident with trying to do a series of videos all in one project using bins and shared media and a savefile that got *WAYYY* out of hand (20 minutes to load the file)- which I believe was tied to importing media from another .proj file, I have switched to a more modular approach with anywhere from 2-5 projects in each project and now a collection of around 15-25 projects on the go. Most of these are "work on a chapter, then change to another project while waiting for footage for another project" and several of them share pieces including multicam segments and sync'd audio.
    Rather than importing from another project, I am using Control-C, switch to a different project file, then paste in. This isn't the most "Adobe Professional" style way of doing things, but considering that I lost several hours to trying to recover from the last project, even when I only needed to spend 20 minutes pumping out a rough cut, I'm not going back to that method until my next computer upgrade and until I begrudgingly switch to CC in around 1-1.5 year's time.
    So the issue that I'm faced with is that I'm often using the Open Recent Project flyout and having 5 projects on that list is just not enough to be remotely useful.
    In MS Office, the list is quite long and even in photoshop, I can get 10. That's enough for my Photoshop, but I switch projects using the Recent Projects list in Premiere a LOT more often. I could just use my explorer windows to jump around, but given that I have 5-6 explorer windows open per project most of which are folders crammed with footage, PSD stills and peak files, plus other non-video things I'm working on right now, that's really not the simplest way to navigate at a glance.
    How can I get 10, 20 or 25 items in that flyout list instead of mucking about with 5?
    I run Adobe Production Premium CS6.

    I see a lot of people not reading the circumstances of what I said.
    I did mention that currently I use the "explorer" method and it's kind of clumsy. Although I liked the idea of using shortcuts. I had thought about moving the files, but didn't think about shortcuts... considering everything on my desktop is a shortcut, I'm really not sure why I didn't think of that.
    But I did mention that I almost always have anywhere from 12-15 windows open at any given time in my explorer. I am involved with management of 4 different companies right now, two of which are in startup mode. Videos are important for me, but not my only duty. These windows only go down when I shut down my computer, which happens on average once every 4 months. It is not a problem on a reasonably capable system.
    Still, for a project of currently 23 files (just got increased to 28 and expected to rise to 32-35), and because I have had project files go sour on me, I keep some hierarchy and because I don't have 100% creative control over all my projects, I also occasionally have to do re-overs ie when a specific style of writ is nixed by a boss or customer. Those 23 project files also have version iterations.
    So navigating 'at a glance' through a file explorer isn't always the most practical.
    In the end, I'll probably try to find some time to re-organize my file structure using shortcuts.
    Still, given the number of 'recent files' can be modified or is larger than 5 in: Windows Start Menu, Recent documents, Adobe PDF recent documents, Adobe Photoshop, All Office suite programs...
    It's just weird that there's only 5 for a program intended for the kind of people that work on projects somewhat larger in scope than "hey, we took the dog to the park the other day".
    @Jerry Klaimon - not sure what version of Premiere you're using, I'm using CS6 with Production Premium CS6. Recent files only shows 5. Photoshop shows 9. For my current workload, I'd probably want 10-12 and it would be nice if they could go to 20 or more IMHO. Look at History states. History states default to 20. I usually set this to 35 whenever I set up any user's computer. It's easy to choose what suits me from the preferences menu. I don't see why they wouldn't have the same idea for 'recent files'
    @anyone who thinks I'm stupid - please feel free to insult me. A forum scuffle is often a great way to get the attention of moderators who might be in a position to pass this idea on to someone who could do something about it. I'm also anal, stubborn, holier-than-thou and not-as-smart-as-i-think-i-am if you want some ideas to get started .
    @Steven Gotz - you are quite correct that asking is important. Probably a smarter thing to do before pestering the devs with feature requests is to thoroughly check to see if it is in fact already existing. Adobe products are famous for having features that nobody knows about. Most of the questions I have that Google or Lynda.com didn't answer have been answered here in the forums. Then once I've seen that a few hundred pairs of eyes sharper than mine have also come up with nothing, then perhaps it might be worthwhile sending in a feature request. In this case, I will probably toss a feature request in later, but I'll probably just use your idea of keeping a master project folder with shortcuts.
    @MarkMapes - I do not have a problem loading files. Project files load just fine for me. But I have one project file that has a problem that loads a HUGE amount of RAM and takes nearly 20 minutes to open. It even takes almost 8 minutes to close it. It was acting as my master file with everything nested in sequences and I needed to spend a whole afternoon to pull those sequences out using copy-paste because bringing them in via Import Sequence brought the problem into the new file. I would file that under "glitched save files" rather than "slow loading".
    @Jon-M-Spear - good idea too - although I did cringe a bit at the suggestion of putting things on the desktop. I have bad habits and I work very hard to try to make other people who have worse habits in this company to try to get them to not keep anything on the desktop. In fact, it's probably my favorite thing about Windows 7 that you can have a clear or nearly totally clear desktop.
    Thanks for your comments folks.

  • I'm trying to download itunes 10 but I get to a point in the download and it tells me, "The feature you are trying to use is on a network resource that is unavailable" but I haven't had itunes on my computer for a year now so how can I get around this?

    I'm trying to download itunes 10 but I get to a point in the download and it tells me, "The feature you are trying to use is on a network resource that is unavailable" but I haven't had itunes on my computer for a year now so how can I get around this?

    iTunes.msi
    Perfect, thanks.
    Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    To install the utility, doubleclick the msicuu2.exe file you downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • On my Mac Pro how can I get voiceover to start reading at a specific point on a document?, on my Mac Pro how can I get voiceover to start reading at a specific point on a document?

    On my Mac Pro how can I get voiceover to start reading at a specific point in a document, and then continue on to the next paragraph and so on?  Thank you.  Ed

    Welcome to the Apple family!!!! 
    How can I cause the VO cursor(box) show-up/start?
    Press Control-Option and F5.   The F5 key is located on the top row of keys 6th key over.  This is a toggling "Keyboard Shortcut" for turning VoiceOver on and off.
    How can I move the VO cursor to various sentences or paragraphs of an article and have it start reading ... and perhaps even continue reading on to the next paragraph(s) ... even to the end of the article?
    How to read a website with VoiceOver
    Step 1:  Go to the Website
    A quick keyboard shortcut is Command-L.  This will jump you up to the address bar.  Start typing where you want to go.  i.e "www.thewebsite.com"
    Step 2:  Working with Webpage
    VoiceOver will automatically start reading the website.  You can pause the speech by hitting the 'Control Button'. 
    If VoiceOver does not being reading the webpage, then you might have to "Interact" with it.  If VoiceOver say "HTML Content" then press Control-Option-Space-Down Arrow to interact with the webpage.
    Use Control-Option-Right Arrow to move throught the website.  This will speak "EVERYTHING" on the page.
    Most website that I've found have their articles labeled as 'Heading'.  You can jump from heading to heading, by pressing Control-Option-Shift-H.
    If you'd like an itemized alphabetical listing of the site, press Control-Option-I 
    Press Control-Option-Space on the link or article you want to view.
    Step 3.  Reading from Top to Bottom
    Once you found and clicked on the the article/link, use the same 'Heading' command, Control-Option-Shift-H to find the title. 
    After finding the title, press Control-Option-A will start reading from the title on. 
    Note:  If there are any other items (ads, pictures, etc) it will read those too. 
    Tip:  You might be able to activate a feature called the 'Reader'.  The Reader isolates the article and elimanates the ads  The keyboard command is Shift-Command-R.  You can also find it in the Menu Bar (Command-Option-M) under the word 'View' then 'Show Reader'. 
    I am using a MACPro with OSX, probably Mavericks 10.9 (where would I look to see if that is the correct information?)
    You can find this information under the 'Apple menu' in the Menu Bar.  To access the Menu Bar, press Control-Option-M. 
    Go to Apple Menu > About This Mac.  This will open up another window.  Use Control-Option-Right Arrow until you hear 'Version'.  If you purchased it brand new from Apple within the last six month, more than likely you have Mavericks. 
    Recommanded Articles. 
    AppleVis- Commonly used Keyboard Commands
    Chapter 2: Learning VoiceOver Basics
    Chapter 6: Browsing the internet
    Apple Accessibility Resource Page
    The  'Commands Help' Voiceover Menu. Control-Option-H-H.  (hit H twice)  is my best friend.  It's a searchable VoiceOver Menu with most of the VoiceOver command.  Example:  You are looking for the 'Read Current Paragraph' keyboard command.   Press Control-Option-H-H and then type Paragraph.  It will then bring up all the commands with the word paragraph.  I believe there are three.   
    As from the Trackpad Commands, I've copied and pasted below from Appendix A: Commands and Gestures
    VoiceOver standard gestures
    If you’re using a Multi-Touch trackpad, you can use VoiceOver gestures. VoiceOver provides a set of standard gestures for navigating and interacting with items on the screen. You can’t modify this set of gestures.
    NOTE:Gestures that don’t mention a specific number of fingers are single-finger gestures.
    General
    Enable the Trackpad Commander and VoiceOver gestures
    VO-Two-finger rotate clockwise
    Disable the Trackpad Commander and VoiceOver gestures
    VO-Two-finger rotate counterclockwise
    Turn the screen curtain on or off
    Three-finger triple-tap
    Mute or unmute VoiceOver
    Three-finger double-tap
    Navigation
    Force the VoiceOver cursor into a horizontal or vertical line when you drag a finger across the trackpad
    Hold down the Shift key and drag a finger horizontally or vertically
    Move the VoiceOver cursor to the next item
    Flick right
    Move the VoiceOver cursor to the previous item
    Flick left
    Move content or the scroll bar (depending on the Trackpad Commander setting)
    Three-finger flick in any direction
    Go to the Dock
    This gesture moves the VoiceOver cursor to the Dock wherever it’s positioned on the screen
    Two-finger double-tap near the bottom of the trackpad
    Go to the menu bar
    Two-finger double-tap near the top of the trackpad
    Open the Application Chooser
    Two-finger double-tap on the left side of the trackpad
    Open the Window Chooser
    Two-finger double-tap on the right side of the trackpad
    Jump to another area of the current application
    Press Control while touching a finger on the trackpad
    Interaction
    Speak the item in the VoiceOver cursor or, if there isn’t an item, play a sound effect to indicate a blank area
    Touch (includes tap or dragging)
    Select an item
    Double-tap anywhere on the trackpad
    You can also split-tap (touch one finger and then tap with a second finger on the trackpad)
    Start interacting with the item in the VoiceOver cursor
    Two-finger flick right
    Stop interacting with the item in the VoiceOver cursor
    Two-finger flick left
    Scroll one page up or down
    Three-finger flick up or down
    Escape (close a menu without making a selection)
    Two-finger scrub back and forth
    Increase or decrease the value of a slider, splitter, stepper, or other control
    Flick up (increase) or flick down (decrease)
    Text
    Read the current page, starting at the top
    Two-finger flick up
    Read from the VoiceOver cursor to the end of the current page
    Two-finger flick down
    Pause or resume speaking
    Two-finger tap
    Describe what’s in the VoiceOver cursor
    Three-finger tap
    Change how VoiceOver reads text (by word, line, sentence, or paragraph)
    Press the Command key while touching a finger on the trackpad
    Rotor
    Change the rotor settings
    Two-finger rotate
    Move to the previous item based on the rotor setting
    Flick up
    Move to the next item based on the rotor setting
    Flick down
    To customize other gestures by assigning VoiceOver commands to them, use the Trackpad Commander.
    Assigning VoiceOver commands to gestures
    If you need a reminder about what a gesture does, press VO-K to start keyboard help, and then use the gesture on the trackpad and listen to the description.
    Learning about keys, keyboard shortcuts, and gestures
    Sorry lots of information.  Enjoy.  You

  • Iphone4 would not restore Error -50. I have tried to restore and it restored it to the point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out.

    Iphone would not restore---- Error -50. I have tried to restore, and it restored it to the new point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out. I can see earlier backups in my C:\Documents and Settings\user\Application Data\Apple Computer\MobileSync\Backup folder. There are four subfolders in this address. I need my contacts, photos, and messages back. I know this is a common error but I can not figure it out. I have ran the other troublshoot items in the error steps for 13 and 14 like apple says. Is there a way to call apple and get a step by step of how to restore from another restore point? Does anybody have a solution????

    It tells you to go to Error 13 and 14 if you receive error (-50).
    Here is what I have tried...
    Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
    Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting. I have moved it around to different ports.
    Put a USB 2.0 hub between the device and the computer. Didn't change anything.
    Try a different USB 30-pin dock-connector cable.
    Eliminate third-party security software conflicts. Removed all virus protection and firewall.
    There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.Used the Microsoft fix it.
    Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online. Doesn't matter.
    Try to restore from another known-good computer and network. I do not know how to do this or how to find the correct/full/complete restore point. There should be more information for this.

  • Installed Trend Micro Smart Surfing on new MacBook Pro and now it has caused error that won't let computer boot up.  How do I get it to a point that I can delete program?

    Installed Trend Micro Smart Surfing on new MacBook Pro and now it has caused error that won't let computer boot up.  How do I get it to a point that I can delete program?

    Try booting up in Safe mode (holding down the Shift key while booting). If the software came with an unistaller, use it to remove alll traces of the software - it's nothing that you need and, as you've experienced, can do more actual hard than good (as is the case with most software of this type). When you're booted in Safe Mode, if you can't run an uninstaller, at least check to make sure that there are no Trend Micro items that are set for automatic log in, at least.
    Clinton

  • How can I get CDP neighbor information from access point reports in Cisco Prime 2.0

    How can I get CDP neighbor information from access point reports in Cisco Prime 2.0?  I have looked through all the reports and I cannot find a report that gives me the CDP neighbor information of an access point.  I thought that information was in there, however I cannot seem to find it.
    Thanks in advance!

    Hi
    You can get this from an inventory report in PI (Select Report Type AP). Here is an example of PI 2.1 works for me. Once you export this into excel you can sort based on controllers & filter the single controller connected AP you want.
    Regards
    Rasika
    **** Pls rate all useful responses ****

  • [iPad] How can I get the popoverController pointer in the viewController

    UIViewController* viewController = [[UIViewController alloc] init];
    UINavigationController* navcontroller = [[UINavigationController alloc] initWithRootViewController:viewController];
    UIPopoverController* aPopover = [[UIPopoverController alloc] initWithContentViewController:navcontroller];
    [aPopover presentPopoverFromBarButtonItem:buttonID permittedArrowDirections:arrowDirections animated:YES]; // popup the popoverView
    precondition：I can't pass the popoverController point to the viewController directly.
    How can I get the popoverController pointer in the viewController?
    I try to use the following function, but it can't get the popoverController:
    self.navigationController.parentViewController
    Message was edited by: MarginD

    There is no "book box in preferences' general".
    There is a new iBooks application that appears on Mavericks' dock.  It looks like this:
    Go there to add books from your Mac to your iPad.

  • How can I get my graph to plot vs. my data points instead of vs. time?

    how can I get my graph to plot vs. my data points instead of vs. time?

    Maybe you could exaplin in a few more words what "my data" is. Are the values equally or randomly spaced?
    If they are equally spaced, just adjust offset and multiplier, and axis label.
    If they are randomly spaced you are probably looking for an X-Y graph. Check the shipping examples.
    LabVIEW Champion . Do more with less code and in less time .

  • When starting up my computer, I get a window that says - apple sync notifier.exe - entry point not found.  how can i get rid of this window?

    When I start up my computer,  I get a window that pops up that says  *  AppleSyncNotifier.exe - entry point not found.  it also says    the procedure entry point xmltextreadername could not be located in the dynamic link library libxml2 .dll.   .  What does this mean and how can I get rid of it?

    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Restart the programme all should be well
    In case that your OS is (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "SQLite3.dll"
    3. Now paste it in the folder  C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Restart the programme, it should not display that message, it should be clear.
    Good Luck

  • If I have forgotten my security questions and am not given the option to send them to an alternate email address because I didn't have one set up at the time, how can I get passed this point? I'm sure I'm blocked out at this time from trying.

    I cannot remember my security questions and I am not given the option to send to an alternate email address because I didn't have one set up at the time.  How can I get past this point?

    See Here... ask to speak with the Account Security Team...
    Apple ID: Contacting Apple for help with Apple ID account security
    Or Here  >  Apple  Support  iTunes Store  Contact

Maybe you are looking for