How can I get an install of 10.7.5 for my MacPro 1,1

I have a MacPro 1,1 which was working just beautifully until a few days ago when my email was hacked and I am certain that something is going on with the machine. It crawls with operations it used to breeze through. I've installed virus protection software and it says nothing is wrong, but I just want a clean install. I know something is wrong.
Whatever is going on isn't malware. E-mail accounts get hacked all the time, and it doesn't require anything from your computer to do that. The timing is undoubtedly purely coincidence, especially if you have done a scan with decent anti-virus software. Which software did you install?
Regarding fixes, you may find something that will help without requiring a clean reinstall in my Mac Performance Guide.
If nothing there helps and you want to do a clean reinstall, as Grant points out, you've got to use a properly-connected keyboard. Grant didn't mention Bluetooth keyboards, but note that I've heard mixed reviews on how they work for this purpose as well.
If you are using a directly-connected keyboard as specified by Grant and holding down the option key by itself, starting as soon as you hear the startup chime, does not result in some kind of recovery disk showing up as an option to boot from, then something is wrong with your recovery partition. In that case, what you'll need to do is erase the hard drive and reinstall Snow Leopard, while booted from a Snow Leopard disk, then update to 10.6.8 to get the App Store, then re-download Lion and install that.

Similar Messages

Adobe CR 6.7 does not install into CS5, how can I get this installed to view CR files?

Just installed CS5 onto new computer. Adobe bridge and CS5 do not recognize CR format. How can I get this installed. I have tried up dating and downloading the CR6.7 update, but can not get it to install. What do I do?

Product updates

I just bought PSE 11. Serial No. accepted but Error appears, preventing me to install. What is wrong OR, how can I get program installed? I've tried at least four times!! Jim H.

I just bought PSE 11. Serial No. accepted but Error appears, preventing me to install. What is wrong OR, how can I get program installed? I've tried at least four times!! Jim H.

Use the instructions here to completely remove/uinstall all iTunes/Apple software and componenets and then start from scratch.
http://support.apple.com/kb/HT1923
B-rock

How can I get to install Microsoft Office 2011 in my Mac OS X 10.6.8 if when down to "writing package scripts" it fails ?, How can I get to install Microsoft Office 2011 in my Mac OS X 10.6.8 if when down to "writing package scripts" it fails ?

How can I get to install Microsoft Office 2011 in my Mac OS X 10.6.8 if when down to "writing package scripts" it fails ?

Contact Microsoft support and ask for help. You've paid for the kit, so installation-time support is part of the expectations. They'll probably suggest a Repair Permissions and a Verify Disk pass, both performed by booting the installation DVD and using Disk Utility from the Utilities menu item, and selecting those two repairs.

How can I get the direction handles to show up for the Position attribute?

How can I get the direction handles to show up for the Position attribute?
I have CS3 and I did the formentioned test and was able to make the handles work for the scale attribute but they don't seem to show when editing the position values.
*I am in the graph editor looking at the "value graph"
*I select the keys and convert the keys to auto bezier (I also tried the ease in and out buttons)
*It changed the graph the way you might think (no longer linear) however the handles are not showing to edit further.
*I also tried using the "convert vertex tool" (part of the pen tool) and still no luck getting those handles.
*the handles only show up in the speed graph but that does me no good.
Please help!
THANKS

I don't have CS3 installed on any of my machines any more but your value graphs for position should look something like this:
There are no handles for position in the Graph editor. You adjust the position curve by editing the motion path in the composition window. Press the G key to bring up the pen tool, then use the modifier keys Crtl/Cmnd and Alt/Option to temporarily switch between select and convert vertex to adjust the paths. Changes will be reflected in the value graphs. You will get editable handles with scale and rotation because these are not spatial properties. Spatial properties, position, Anchor Point, all XY & Z coordinates are edited in the comp window or in the layer window after revealing the properties. IOW, you edit anchor point position paths by opening up the layer window and choosing Anchor Point from the display options.
The Manual isn't wrong. Here's a link to the live docs.

I have paid for ipages 09 on 15/05 but never succed to enter the serial code. After 45 days, altough I was charged by 20 chf, I cannot completely use all ipages tools(impossible to save ). How can I get again the serial code I paid for?

i have paid for ipages 09 on 15/05 but never succed to enter the serial code. After 45 days, altough I was charged by 20 chf, I cannot completely use all ipages tools(impossible to save ). How can I get again the serial code I paid for?

Getting the request for a serial number means that at some time you had the iWork ’09 trial installed. You need to delete the trial & then reinstall from the boxed DVD or the Mac App Store. The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user. The easiest way to fix the problem is to use Yvan Koenig's AppleScript that removes the files. You can find it on his box.com account in for_iWork'09 > other_iWork'09 items > uninstall iWork '09.zip. Download uninstall iWork '09.zip, decompress it, open it in AppleScript Editor and click the Run button.
Apple's support article on the subject says it's due to having a copy of the trial that is a higher version that the one you've purchased, but I'm not sure that is very common. This problem started with Snow Leopard & it seems to be some code in the iWork installers that doesn't do what it should.

How can i get or download the apple hardware test for a macbook pro made in 2012 running Mavericks 10.9.3

Does anyone know how can i get or download the apple hardware test for a macbook pro made in 2012 running Mavericks 10.9.3. Thanks.

Sean and Andy -
I have to agree with Andy here. I am having the same problem on a mid 2010 MBP (6,2). I have already read the AHT info provided by Sean's link, and they are less than helpful. I'm sure they will be helpful to those who find that they work, but they are confusing if this is not the case. For example, my MBP(6,2) came with ONE (not two) installation disks, so the instructions don't work for me. Another issue is the instructions confound the descriptions related to the MBP, the original (delivered) software (OS X version), and the current installed OS X upgrade software.
So here's what does NOT work for me...
     (A) I cannot install 'Disk 2', since I never received this with my original (new) purchase in mid 2010.
     (B) I have checked my firmware versions and they are all up to date, as per Apple's information.
     (C) As suggested in another thread, I looked for /Library/Core Services/.diagnostics and it was NOT present. I followed his instructions, downloaded the correct (I believe) dmg, and installed it. It is in the correct place, and I can see all the invisible files using Pathfinder.
     (D) When I re-start holding down the D key (immediately), it just goes through the normal boot routine; no evidence of AHT.
     (E.1) When I re-start holding down OPT-D, I get a spinning globe, and then it prompts me for a network (wi-fi) connection.
     (E.2) For some unknown reason, the prompt identifies between 2 and 5 of my --neighbors'-- routers, but does not show mine. (??!!)
     (E.3) The routers are listed alphabetically; however, my router SHOULD be at the top of the list by this criterion, but it is nowhere to be seen.
     (E.4) The 'internet recovery' process then allows me to enter a network name AND password. I do this, for my current wi-fi router, and the process rejects it as an incorrect login ID. It is NOT an incorrect login ID!
So, now asking Sean and Andy (or anyone else) for further suggestions... ??? As Andy suggested, many people ask questions here because they have -already- worked through the 'official' recommendations, and have found them to be inadequate.
Any advice would be appreciated! TIA.
Ed

HT1727 i bought some ringtones on my iPhone, later on i sync my iphone to my old computer now i have a new mac pro desktop and i only have 2 ringtones on my phone but not the rest of them how can i get them back without having to pay for them again?

i bought some ringtones on my iPhone, later on i sync my iphone to my old computer now i have a new mac pro desktop and i only have 2 ringtones on my phone but not the rest of them how can i get them back without having to pay for them again?

If you bought them on your iPad then you will need to connect your iPad to your computer's iTunes and do File > Devices > Transfer Purchases to copy them over to the Tones part of your computer's iTunes library and you can then sync them to your iPhone - ringtones are a one-time only download, so you won't be able to redownload them directly on your phone.

HT204053 If I have an apple ID for myself and my wife has just got a iPhone for the first time how can she get the same apps as I have for my iPhone and iPad

If I have an apple ID for myself and my wife has just got a iPhone for the first time how can she get the same apps as I have for my iPhone and iPad by getting it off my iCloud?

She can't from iCloud without setting up your iCloud account on her phone. But just sync the same apps from your iTunes Library on your computer to her phone.
Your wife should setup her own iCloud account - which is separate to the iTunes Store accounts.

I just updated my iPad to OS5 and all of my apps are gone. What did I do wrong and how can I get them back? Several were paid for. Thanks

I just updated my iPad to OS5 and all of my apps are gone. What did I do wrong and how can I get them back? Several were paid for. Thanks

If you have failed to make sure that any apps purchased on the iphone were transferred to your computer before updating, then you will have to redownload.
Open itunes store, click Purchased, under Quick Links.

How can I get (using API) the current sort column for some report

hello,
How can I get (using API) the current sort column for some report ? For example something like "fsp_sort_1_desc" - if the user sorts by the first column ?
I cannot use the :REQUEST for this, sometimes the current sort column is not in the :REQUEST, but it is still active.
I thought it was posssible by using
APEX_UTIL.GET_PREFERENCE (
p_preference IN VARCHAR2 DEFAULT NULL,
p_user IN VARCHAR2 DEFAULT V('USER'))
RETURN VARCHAR2;
function, but I don't really know which preference should I pass as parameter.
looking in WWV_FLOW_PREFERENCES$, i saw preferences_names like FSP4000_P527_R6281510839654570_SORT , I'm not sure how this name is formed.
I'm using generic columns for that complex report (which has a flexible number of columns shown), and the idea is that sometimes I have to overwrite that sort column, in case the user chose the version of the report with fewer columns than the previous one.
Can I get (using API) a list of all preferences set for some user ?
Thank you,

seems that it is FSP<app_number>P<pagenumber>R<regionnumber>_SORT.
is there anyplace where I can get these kind of things documented ?
Thank you.

How can I get a copy of 10.7 Lion for my recently purchased Black MacBook Intel Core Duo?

How can I get a copy of 10.7 Lion for my recently purchased Black MacBook Intel Core Duo? Lion is not currently available at the App Store.

if your system will run it see this Apple Software for instructions on how to purchase Lion.

Hi guys i update my IPOd 4G with the new iOS5 .I made a Backup and I load it but all my Photos are lost how can I get them back ??? thx for Help

HI guys
I need help.
I load the new iOS5 and I made an Backup and I load it too,but all my Photos are lost HOw can I get them Back ???
thx for help !!!!!

Which photos? If the missing photos were synced to the iPod then you have to get them from where you got them the first time. Synced photos are not in the backup that iTunes makes.
iTunes: About iOS backups

HT201272 My ipod touch will not update a paid app---Strange Rain. using version 4.2.1. How can I get this installed and updated?

I have updated to the supposed newest version for my touch.
But it still will not sync and update my Strange Rain app.
How can I get this back?

According to the product description the latest version of this app requires ios 4.3 or later.
You would have to use your copy of the older version.

How can I get Colorful Tabs to use separate colors for 2 different gmail accounts?

Running Firefox 29.0.1 on iMac OSX 10.9.3. I have multiple Google accounts: 2 gmail accounts and 1 Google Calendar. The Add-on Colorful Tabs will allow me to choose a color for one gmail account , but it also uses that same color for the other gmail account. How can I get different colors on 2 different gmail accounts?
Also, Colorful Tabs is also doing the same thing for my homepage (google.com) and my google calendar. How can I get different colors on these 2?

I personally use "Fabtabs" for my mozilla FireFox.
https://addons.mozilla.org/en-US/firefox/addon/fabtabs/
This add-on doesn't have any issues like that when I use it.

How can I get an install of 10.7.5 for my MacPro 1,1

Similar Messages

Maybe you are looking for