How can i get analisis.llb in vision module?
hi.
i have labview 8.2 version.
i want to make line profile on an image.
i found that it is possible with IMAQ lineprofile.vi VI.
which is situated in c:/........./vision/Analysis.llb
But i don't have Analysin.llb library in the respective folder.
I don't have NI vision development module.
Can i get analysis.llb by installing the LW 8.2 again or i shall have to install NI vision development module?
please help me.
and also suggest me some examples related to line profile and area profile, if anyone have.
nirmalvishal wrote:
I don't have NI vision development module.
Can i get analysis.llb by installing the LW 8.2 again or i shall have to install NI vision development module?
Hi Nirmal,
You must buy and install NI Vision module/toolkit, however it is called...
Then, you ll get that LLB automatically installed in the specified location.
- Partha
LabVIEW - Wires that catch bugs!
Similar Messages
-
How can I get the Email Campaigns Blog module to display correctly in Outlook?
I'm having a bit of trouble with this. I've used the email campaign builder to build a campaign; added the blog module to it and applied a custom template to it so that it should display correctly, but outlook has other ideas...
Here's what it should look like:
and here's what outlook gives me:
this is built within tables and the tables and cells all have set widths of 520px, yet the blog module seems to ignore this and somehow sit outside of them, breaking the template (BUT only in outlook).
Is this a problem anyone has experienced before?
Any ideas on how to fix it?
Thanks
SamHTML Email Campaign design is still a very tricky beast. There are no standards like the makers of the major web browsers have been pushing for and adhering to over the years for web designers so since there are any number of email clients like your native mobile phone email clients, desktop clients like Outlook and Thunderbird and then web-based email clients like Gmail, Yahoo!, etc. there's no standard to display HTML in emails so each client does things differently.
Outlook and Gmail in the past have been the worst offenders. Fixing it is nothing simple. You need to go into your markup and make sure every table has a width set both in the inline STYLE attribute as well as the WIDTH attribute on the TABLE element.
Outlook 2007 and 2010 are both horrendous at displaying HTML uniformly- as it relies on the Microsoft Word rendering engine. Most of the time for my clients I tell them that if the end user can read and click links in Outlook then it's a win-- they're used to seeing horrible formatted emails no doubt. But, if you find most of your email list is using Outlook (corporate/enterprise customers) then you should keep tweaking it.
It's impossible to tell from screenshots what the issue is-- it's likely a markup issue if there is one. -
I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?
For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
See:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Be well... -
I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?
For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
See:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Be well... -
Currently using version 3.6.27 as the updated versions are not compatible with my low vision software called Zoomtext. I constantly get Firefox asking me to upgrade. How can I get it to stop asking me to upgrade. (I have tried each upgrade and they are all incompatible with Zoomtext.
Go to '''Options''' window > '''Advanced''' panel > '''Update''' tab > '''Firefox updates '''> click '''Never check for updates (not recommended: security risk)''', click '''OK''' to save it, exit firefox and restart it.
see for more info: [https://support.mozilla.org/en-US/kb/Options%20window%20-%20Advanced%20panel#w_update-tab Options window - Advanced panel - Update tab]
BUT you see the warning : Warning: If you select this option, you will not receive '''critical security updates that may keep you safe online''' unless you frequently do a '''manual check for updates'''.
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem. -
How can i get the lasted vision of visual administrator
HI:
when i connet j2ee engine,i get the system warning:
"visual administrator vision is older than the version of j2ee engine kernel: ..."
how can i get the lasted vision of visual administrator?Get your portal administrator to copy the j2ee/admin from the server you're trying to connect to. You can then install and run it from your local hard drive.
-
How can i get a chinese vision PS CC?
how can i get a chinese vision PS CC?
Click on the gear (upper-right hand corner) Choose "Preferences", Click on Apps tab, choose Simplified or Traditional Chinese. Then click "Try" next to the PS icon to install.
(if this solves your problem, marked it as "answered", if not submit a follow up question) -
How can I get updated software so my spyder2pro works on my MacBook Pro?
You can get in touch with the Developers and see if they intend to release a version in the future which won't require Rosetta. Rosetta has been dropped in Lion. They make it quite clear on their site that Rosetta is a requirement, so I wouldn't hold my breath. That leaves you the option of finding a similar program which will run on Lion, or return to Snow Leopard, if they have no plans to make changes to their program in the future.
Good Luck -
How can I get "IMAQ Line Fit" stable (with the same points)
How can I get "IMAQ Line Fit" stable (with the same points)
I my vision applications I use a lot off times "IMAQ Line Fit"
some times the results are not Stable.
See vi and word document attached.
When I take the same points but in a other order (sort)
then suddenly all points are used.
In this case I was looking for a edge in vertical direction (Y).
I found the points but "IMAQ Line Fit" did not function well.
I tried changing all settings like pixel radius and minimum score and
also threshold and so on. But no result.
Then I sorted the points reversed and that worked. See vi.
I use labview Labview 8.6.0 and IMAQ machine vision.
Maybe this problem is solved in a newer version.
Please let me know.
Thanks
Attachments:
TEST-imaq-line-fit-86.vi 169 KB
IMAQ-Fit-Line-Problem-86.doc 230 KBThank You for your reaction Hossein,
This "one application" uses "Line fit" about 20 000 000 times a day.
about 200 will go wrong. With your setting the the "Line fit" for this occasion will work but others will go wrong.
A algorithm should be:
1e Stable, when using the same points and settings the result MUST be the same. How the points are sorted should not matter.
2e Accuracy
3e Speed
4e Testing. Is very difficult but al least close points and the same points and sorting ... should be done
NI now as made a " IMAQ Line Fit" Problem CAR (Corrective Action request) 298016.
so in the future there will be a update.
In the mean while a made a line fit which uses Bisquare option from Linear Fit.vi :
from C:\Program Files\National Instruments\LabVIEW 8.6\vi.lib\analysis\6fits.llb
This is a temporary fix because "IMAQ Fit Line VI" is not so stable.
Because outliers should be rejected only Bisquare does this reasonable.
This program does NOT USE "Minimum Score" and "Pixel Radius"
Valid fit = When there are enough points within Outlier_Distance.
Algorithm steps:
- Determine if line is more horizontal then vertical, Compare DeltaX with DeltaY
- If DeltaX <= DeltaY then SWAP X Y and later Swap back
- Sort Points at on X value
- First : Bisquare Linear Fit
- Calculate distances to the found line for all points
- Inliers: Points within Outlier_distance
- Outliers: Points outside Outlier_Distance
- Only use Inlier Points
- Check again if DeltaX < DeltaY then SWAP X Y later SWAP back again
- Second : Bisquare Linear Fit only with the Inlier Points
- Results are from the second fit
Warning : This Program is Not so accurate and Not so fast
See attachments it is in labview 8.6
If some has a improvement please let me know.
Thanks
Attachments:
svi_fit_line_Bsquare_and_draw.vi 18 KB
Fit_Line_Bisquare_Linear.vi 40 KB -
How can I get the Voiceover Keyboard shortcuts to show up in a form in which I can copy
I have low vision & have been trying to learn to use Voiceover on both my iPhone & my Mac mini for months. Very frustrating.
1. How can I get the Voiceover keyboard shortcut commans to show up in a form in which I can copy & paste them into a pages document so I can print it out & use for quick reference?? The one that shows up when I press VO +HH won't let me copy & paste it, & it won't show up in the Help section no matter what subject I enter. The help topics shown do not correlate with the topics I'm entering. why is that??
2. Please make the cursor able to be wider, like in the software program Zoomtext, that I used when I had a PC. The razor-thin cursor (in this text box!) in Pages is impossible for me to see.
Thank you for any help you can provide.http://www.applevis.com/guides/voiceover-keyboard-shortcuts-mac-os-x
You should be able to copy them from there. -
Where can I get ComponentWorks IMAQ Vision reference?
I have setup LabVIEW2012 on my pC. The cwimaq.ocx and cwimagview.ocx were also registered. Now I want to building componentWorks IMAQ Vision Applications with Visual C++6.0.
I use the Visual C++ MFC AppWizard created a skeleton project and program. After insert the Activex Control in the program, the corresponded wrapper classes were created. But I don't know how to use these classes. For example ,how to display two dimensional array as image.The manual of "Getting Results with ComponentWorks™ IMAQ Vision" says that ComponentWorks online reference (If you have ComponentWorks installed on your computer, you can access the online reference by selecting Start»Programs»NationalInstruments>>ComponentWorks»ComponentWorks Reference).
But I only registered the Activex control. How can I get the ComponentWorks setup program and the detailed reference？ Many thanks.Brian;
There is an example on how to display images in LabVIEW without having the full IMAQ application.
You can always convert the images to bitmaps (flattening) and display them in a picture indicator. If you are going to do some image processing within LabVIEW, this may be the way to go.
About the error you are getting, hopefully the above example will help you in resolving the issue. If the problem persist, it will be more beneficial if you can post the code. Also, you may get better answers if you post your question in the Vision forum.
Regards;
Enrique
www.vartortech.com -
i am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier photo please help me to recover my photos
Well I'll guess you're using iPhoto 11:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
How can i get the all values from the Property file to Hashtable?
how can i get the all values from the Property file to Hashtable?
ok,consider my property file name is pro.PROPERTIES
and it contain
8326=sun developer
4306=sun java developer
3943=java developer
how can i get the all keys & values from the pro.PROPERTIES to hashtable
plz help guys..............The Properties class is already a subclass of Hashtable. So if you have a Properties object, you already have a Hashtable. So all you need to do is the first part of that:Properties props = new Properties();
InputStream is = new FileInputStream("tivoli.properties");
props.load(is); -
How can i get all values from jtable with out selecting?
i have one input table and two output tables (name it as output1, output2). Selected rows from input table are displayed in output1 table. The data in output1 table is temporary(means the dat wont store in database just for display purpose).
Actually what i want is how can i get all values from output1 table to output2 table with out selecting the data in output1 table?
thanks in advance.
rajaYou could set the table's data model to be the same:
output2.setModel( output1.getModel() ); -
When I sign in to a site on my iPad using my email address as ID a short cut of my email address comes up. How can I get rid of it?
You can edit keyboard shortcuts in Settings>General>Keyboard>Shortcuts>Edit.
Maybe you are looking for
-
I have 300 apps organized in folders on my ipod touch 4th gen, and connected my iphone 4, these apps have copied over but none have been placed in folders, any ideas how to replicate folders from ipod to iphone...?
-
Create Sales Order with reference to Quote for different customer
HI Expert Any idea how I may be able to do this? Create Sales Order - for Customer B (VA01) with reference to a completed Quote for Customer A. While keeping the line items, quantity and pricing exactly the same. Quote - Customer A - > Sales Order -
-
Hello all, After a lot of research on many forums I got a new iMac 27'' 2013 few days ago. I wanted to use it for internet, iPhoto and some finance management. I went ahead and got the best model I could get hoping to keep it for atleast 5 years. Bas
-
Correlated subquery execution problem
Hi In correlated subqueries which query executed first whether the inner query or outer query i.e while oracle processing the query give me example thanx asp
-
Setting up 4 new Iphone on 1 computer
I have 4 new Iphones that I need to setup to be used for a marketing campaign. Question - Can I set these new phones up using one mac computer and Itunes with my personal Iphone already set up on this computer? If i can run multiple iphones from one