How can I get arch-chroot to source /root/.profile [solved]

I really like the arch-chroot script. When I come into the chroot using the script, I see that the shell is /bin/sh instead of bash. That is ok. How can I get the root user inside the chroot to source /root/.profile automatically? I have a line in there that will
exec /usr/bin/bash
. Thank you.
Last edited by maggie (2013-09-16 19:27:20)

2ManyDogs wrote:
Beginner's Guide wrote:
Note: Use
arch-chroot /mnt /bin/bash
to chroot into a bash shell.
That works. Thank you.

Similar Messages

How Can I get personal java example source?

i want to know how to program with p-java.
How Can I get personal java example source?
and where can i get them?

pjava is pretty much the same as regular java 1.1.x, so you could just look at any java examples. www.javasoft.com has a learning center with tutorials if that's what you're looking for

How can i get external html page source code

Hello,
You can get the source code of a web page in a WDA application?
It would be a common web page yourself.
Does anyone know answer me?
Tks
Wille

You want to run an external web page within your Web Dynpro? If so the UI element iFrame is probably what you should use. Caution: The iFrame was deprecated in 7.0 and 7.01, although it will return to full support again in 7.02.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/15/c07941601b1d09e10000000a155106/frameset.htm

How can I get sound from tv or stereo when watching netflix on MacBook Air?

I have my macbook air hooked up to my tv and want to watch netflix but the only sound is from my macbook. How can I get sound from other sources ie tv or stereo?

Check with Netflix for their system requirements.

How can I get the scrubber software to correct a driver installation error?

I am currently on Windows 8.1. When I try to install the printer driver for my OfficeJet Pro L7650 I get the following error message: "System cannot find file specified".
I have read that there is a scrubber software that will solve this issue. How can I get this software?
This question was solved.
View Solution.

You can get that HP program here.
Restart your computer.
Next run the HP Printer Install Wizard program found here.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

How can i get the source code from java concurrent program in R12

Hi 2 all,
How can i get the source code from java concurrent program in R12? like , "AP Turnover Report" is java concurrent program, i need to get its source code to know its logic. how can i get its source code not the XML template?
Regards,
Zulqarnain

user570667 wrote:
Hi 2 all,
How can i get the source code from java concurrent program in R12? like , "AP Turnover Report" is java concurrent program, i need to get its source code to know its logic. how can i get its source code not the XML template?
Regards,
ZulqarnainDid you see old threads for similar topic/discussion? -- https://forums.oracle.com/forums/search.jspa?threadID=&q=Java+AND+Concurrent+AND+Source+AND+Code&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

How can I get a file to copy all of the files in a directory except itself and the source of the copy function will be the directory the final program is in?

How can I get a file to copy all of the files in a directory except itself and the source of the copy function will be the directory the final program is in? This application must be in Lab View 8.

you mean something like this (see below)?
Now you may have to implement code to check if the destination folder exists and to create it, etc. But if you use the Front Panel Control to select the destination folder, it should be okay.
Not the best implementation, mind you but you'll get the idea..
Message Edited by JoeLabView on 04-18-2007 03:43 PM
Attachments:
copy folder contents.PNG ‏10 KB

I brought an IPhone 5 from a second hand source and I tried to activate it but it asked for his Apple ID how can I get around that

I brought an IPhone 5 from a second hand source and I tried to activate it but it asked for his Apple ID how can I get around that?

MarkeyMarcc wrote:
I brought an IPhone 5 from a second hand source and I tried to activate it but it asked for his Apple ID how can I get around that?
Read this: Find My iPhone Activation Lock: Removing a device from a previous ...

How can I get the source code of the google chrome ios app

How can I get the source code of the google chrome ios app

Google is your friend
http://www.chromium.org/
and
https://developers.google.com/chrome/mobile/docs/iosoverview

How can we get the source of the page which is loaded on the browser using

Dear Sir,
How can we get the source of the page which is loaded on the browser using javascript
What is the exact path to get the source object in JS?
thanks & regards,
Sudheesh - INDIA

um... the document object?

How can I get the NotePad source..

Hi. there.
I am thinking about printing with java web start.
There is A Simple NotePad demo in Java Webstart demo page.(http://java.sun.com/products/javawebstart/demos.html)
It present how a sandboxed application can save and load files, print, and access the clipboard in a safe and secure manner using the JNLP API.
I can't find the source at this site.
How can I get the NotePad source..
Please help me...

I have not seen any demo source.
However under the developer's section on http://java.sun.com/products/javawebstart there is a developers guide, which contains some snippets about how to use the clipboard and printing services.
If you plan to sign your jar, you won't have to use these
services.
Regards,
Marc

How can I get the XSLT source code?

How can I get the XSLT source code?

Actually, I want to parse customer reviews for academic purpose.
I'm trying to follow the links in the customer reviews zone.
For example:
In the following page
http://www.amazon.com/gp/product/customer-reviews/B000LU8A7E/sr=1-1/qid=1180473311/ref=cm_cr_dp_all_helpful/102-2890495-8864146?ie=UTF8&n=1065836&qid=1180473311&sr=1-1#customerReviews
in the "customer reviews" section, there is a link "next" that gets the next 10 reviews.
The thing is that I don't know how to imitate its action using java and actually, I'm not sure if it is possible to do that using software.
I tried to look at the source code that I got using the previous java code I posted and I see that the next link always has the following href attributes "http://www.amazon.com/gp/product/customer-reviews/B000LU8A7E"
I tried to see if there is any javascript that tells the page which 10 reviews to get but with no success.
So if anyone knows how to imitate the next link action using software that will sure help me a lot.
Thanks in advance

How can I get rid of all the 'adobe' sources listed when importing in Lightroom?

How can I get these files to eject/disappear? I have tried searching them in finder and can't find them? Thank you.

Those appear to be disk-image files (extension .DMG) somewhere on your hard drive, perhaps that are mounted as volumes and you need to eject or unmount them. They are likely installers downloaded from Adobe.

How can I get iTunes to display the tracks from a CD in their original (album) order?

To be absolutely honest, I don't really understand what this box is for, so I shall just use it to repeat and expand on my question. (I have already sent a "Feedback" comment on the same topic).
How can I get iTunes to display the tracks from a CD in their original (album) order?
It seems to me that there is something very basic wrong with the way iTunes handles CD Tracks.
Professionally produced CD tracks are seldom if ever in a randomised order. Why then does iTunes seem unable to display the tracks in the order they appear on the original CD source - whether from a personally owned CD or from a download from the iTunes Store?
Some music demands a specific, non-alphabetic sequence in order to make sense. Why does it seem that iTunes only offers Alphabetic, or reverse alphabetic order - both of which make a nonsense of the original, often intended order of tracks?
Why not replace the so-called "cover-art" in the bottom left hand corner if the iTunes window - which, while it may look attractive to some, gives the barest of information concerning the original disc, with a list of the original CD tracks in their original order, so that the user can easily reestablish the order in which they should be played.
As I would expect legibility might be a problem with doing this, why could not the original contents, (in their original order), at least, be displayed when the "cover art" is double clicked-on - the result of which at present gives me an enlarged version of the "Cover Art". While on the subject of the contents of the source disc, what about all the album notes which someone takes trouble to write in order to increase the appreciation of the music on the CD and the listener's general background knowledge of the artists involved. Such notes, it seems to me, have considerable intrinsic value in their own account. I would, I think, normally be prepared to buy such "Sleeve notes" - so long as a "taster" was supplied (as it is for the music) - for something like the cost of a single 'Tune" on iTunes.
These two aspects let Apple iTunes down enormously, in my opinion. I think that by chopping even quite protracted sequences of music up into bits does no one any favours - except perhaps Apple's already quite substantial bank balance. People have to be aware that two and a half, to three and a half minutes is a very short time to develop a piece of worthwhile music, and that there are many, many composers, not all of whom are alive today who have written music that huge masses of mankind value for the enrichment of their lives and the human condition in general.
Please make the viewing of iTunes tracks in their correct order by default possible. By all means have the alphabetical variations available as offering a different approach to the music, but not the sole approach to it - PLEASE.
Frustratedly yours
Alan Whitaker
PS I work at my old 24" iMac Intel Core 2 machine which runs OS "Tiger" - because it is more beautiful to look at, the screen is more pleasant to work on, and because, in some ways it is more capable (it will run FreeHand MX without needing a "patch"), than my more recent 21.5" which runs "Snow Leopard". (I don't find it that much slower, either).

Dear Mike
Thanks for the support. I am utterly amazed that after all the hype about how good iTunes is that it cannot play a downloaded CD in the correct order, and that what that order should be is not available directly from within one's own iTunes installation. (I know that one can go back to the iTunes Store to check what the order should be, but having downloaded the tracks surely iTunes is clever enough to retrieve this important information.
My iTunes to differ from yours in that I have also noticed that it seems unable to download copies of my "talking books" in the correct order either. But in my case it downloads them - from a CD - in order, but with the first track downloaded first - so that it appears at the bottom of the column of tracks so that it would get played last! (At least this is, while being inexplicable, a relatively "logical" bit of blundering and because of this is relatively easy to put right!).
I like many genres of music, some of which are not really programmed except perhaps by the artist performing them. I know that Frank Sinatra was very careful to programme his album songs to obtain a particular effect and in relation to the keys of the music. iTunes presumes to know better.
Film scores may be totally randomly put together, in some cases, but in others the order is vital to one's appreciation of the music as a whole and how it relates to the plot of the film.
In symphonic music most works are divided into sections and are conceived by the composer that way. Some individual sections may gain a life of their own if played separately, but they are never complete in the sense that the composer envisaged them without being placed in their proper context.
Opera and probably most choral music too, is similar except that the words may well become meaningless if the order is changed at the whim of a piece of ill-written computer code, while ballet music has to be heard totally within its sequential context or it becomes meaningless.
Finally, I would venture that iTunes, by jumbling up the order of the tracks as recorded on a CD, does an immense disservice, not only to the music on a particular CD, but to music in general, by expressing everything in terms of "Songs" - which it seems to interpret as stand-alone items of between 2 and 4 minutes whatever the genre. Even the way the iTunes publicity speaks of how many "songs" it can store instead of how many minutes or hours of recorded sound. This has to be another brick in the wall of "dumming-down" of people's expectations, and the shortening of their attention spans.
I don't know about anyone else, but I feel betrayed by Apple over this. Perhaps the look, feel and general presentation of an item are not the most desirable features of a consumer product. Maybe it should be judged more on it fitness for the purpose for which it was sold. There is one other possibility - that Apple are trying to redefine "Music" - and that everything that lasts longer than about 3.5 minutes or is in the form of what could for want of a better term be called symphonic in the broadest sense is something else - not "Music" within Apple's new definition, at all!
Well that's off my chest! now I can get down to creating some sort of order in my iTunes Libraries, knowing that I have to reconsult all the sources in order to confirm the source playing order.
Anyway thanks again. At least I know that it is not just me
alanfromthatcham

How can I get the "text" field from the actionEvent.getSource() ?

I have some sample code:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.util.ArrayList;
public class JFrameTester{
     public static void main( String[] args ) {
          JFrame f = new JFrame("JFrame");
          f.setSize( 500, 500 );
          ArrayList < JButton > buttonsArr = new ArrayList < JButton > ();
          buttonsArr.add( new JButton( "first" ) );
          buttonsArr.add( new JButton( "second" ) );
          buttonsArr.add( new JButton( "third" ) );
          MyListener myListener = new MyListener();
          ( (JButton) buttonsArr.get( 0 ) ).addActionListener( myListener );
          ( (JButton) buttonsArr.get( 1 ) ).addActionListener( myListener );
          ( (JButton) buttonsArr.get( 2 ) ).addActionListener( myListener );
          JPanel panel = new JPanel();
          panel.add( buttonsArr.get( 0 ) );
          panel.add( buttonsArr.get( 1 ) );
          panel.add( buttonsArr.get( 2 ) );
          f.getContentPane().add( BorderLayout.CENTER, panel );
          f.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
          f.setVisible( true );
     public static class MyListener implements ActionListener{
          public MyListener() {}
          public void actionPerformed( ActionEvent e ) {
               System.out.println( "hi!! " + e.getSource() );
               // I need to know a title of the button (which was clicked)...
}The output of the code is something like this:
hi! javax.swing.JButton[,140,5,60x25,alignmentX=0.0,alignmentY=0.5,
border=javax.swing.plaf.BorderUIResource$CompoundBorderUIResource@1ebcda2d,
flags=296,maximumSize=,minimumSize=,preferredSize=,defaultIcon=,disabledIcon=,
disabledSelectedIcon=,margin=javax.swing.plaf.InsetsUIResource[top=2,left=14,bottom=2,
right=14],paintBorder=true,paintFocus=true,pressedIcon=,rolloverEnabled=true,
rolloverIcon=,rolloverSelectedIcon=,selectedIcon=,text=first,defaultCapable=true]
I need this: "first" (from this part: "text=first" of the output above).
Does anyone know how can I get the "text" field from the e.getSource() ?

System.out.println( "hi!! " + ( (JButton) e.getSource() ).getText() );I think the problem is solved..If your need is to know the text of the button, yes.
In a real-world application, no.
In a RW application, a typical need is merely to know the "logical role" of the button (i.e., the button that validates the form, regardless of whether its text is "OK" or "Save", "Go",...). Text tends to vary much more than the structure of the UI over time.
In this case you can get the source's name (+getName()+), which will be the name that you've set to the button at UI construction time. Or you can compare the source for equality with either button ( +if evt.getSource()==okButton) {...}+ ).
All in all, I think the best solution is: don't use the same ActionListener for more than one action (+i.e.+ don't add the same ActionListener to all your buttons, which leads to a big if-then-else series in your actionPerformed() ).
Eventually, if you're listening to a single button's actions, whose text change over time (e.g. "pause"/"resume" in a VCR bar), I still think it's a bad idea to rely on the text of the button - instead, this text corresponds to a logical state (resp. playing/paused), it is more maintainable to base your logic on the state - which is more resilient to the evolutions of the UI (e.g. if you happen to use 2 toggle buttons instead of one single play/pause button).

How can I get arch-chroot to source /root/.profile [solved]

Similar Messages

Maybe you are looking for