How can I get ATV2 to connect to my EVO's WiFi Tether?

The ATV2 has no problems finding normal WiFi connections, but when I tried to hook it up to my HTC EVO's WiFi, it couldnt even find it. Is there a way around this?
My phone's download speeds are faster than my home network's so I'd like to try it out.

Connect your iPhone via the standard USB connector to your computer, open Bridge and if you have not set to open Photodownloader automatically use the command File / Get photo's from camera or use the tiny camera icon with arrow down at in the icon bar top left of bridge window.
This should open Adobe Photodownloader and it should auto select the images and movies but otherwise use the option to select the source. Also study the options available in Photodownloader and use the advance button to get some thumbs of the content on your phone.

Similar Messages

How can I get an automatic connection to wifi on startup?

We lost internet connection during snow/ice storm. I have to manually connect to wifi now. How can I get an automatic connection to wifi?

An 'uninterruptible power supply' that automatically steps in and takes your computer
off the grid momentarily, will work in cases of brown-out (under-power) & surge (spike)
and it does so at a fast rate. Most of these also offer a way to customize sensitivity to
a certain degree, depending on model and should there be a valid reason to do so.
An old-school surge protector, even if it has a few fancy LEDs, is no protection. And
for less than a replacement logic board or an hour of authorized Apple repair, the UPS
is a fairly good investment. Backup battery is user-replaceable in the better made units.
Most of them offer extra ports that do not use the battery-backup power feature. If you
need to have more items run when the power switches up/down or out, you'd need to
consider a larger capacity backup power unit. In some instances, the makers of these
(for a time, perhaps even now) did caution users to not install more than one UPS per
room when the same leg may have inadequate grounding, since these can dump the
excess surge power from several different UPS units and overload the ground.
That said, the gamble is yours. I've found to have and use these is some protection
and when away from the computer. Most settings for controlling them appear in OS X.
No additional software is required. Other settings may be on the UPS front panel.
Good luck & happy computing!

My itouch wont connect to the wifi but my laptop will. How can I get it to connect?

My itouch wont connect to the wifi but my laptop will. How can I get it to connect?

What happens when you ry to connect? Error messages?
Does the iPod connect to other networks?
See:
iOS: Troubleshooting Wi-Fi networks and connections

How can I get rid of my own contacts from my wife's contacts list?

Somewhere along the way my wife's contacts app on her iPad, her Mac and iCould, was populated with all of my own contacts (lots). How can I get rid of mine without deleting her own. I have backed up her contacts on the Mac and I have checked that new contacts are not appearing on each other's lists. Hers is an iPad 2 running iOS 8.1.1. The Mac is running Mavericks.

Contact iTunes Support and request that they zero out your account balance.
iTunes Support -
http://www.apple.com/support/itunes/

BC4J - How can I get java.sql.Connection ?

Hi,
I am using BC4J for my Application and want to get the java.sql.Connection from ApplicationModule or from anywhere such that I can use the same connection as in ApplicaitonModule, to do some work in the database.
I tried to get it from the SessionInfo :
sessioninfo.getConnectionInfo();
but this returns me oracle.dacf.dataset.connections.Connection
How can I convert this to java.sql.Connection?
Or Is there any other means to get hold of sql.Connection?
Any help would be appreciated.
TIA

Thanks for this reply.. but
I need java.sql.Connection to call a stored procedure in Oracle database and I have to pass oracle.sql.ARRAY to it.
My Stored Procedure looks like:
create or replace PROCEDURE updateRevenueNetworkInfo(revid varchar2, netids Varchar32Array)
where 'Varchar32Array' is my own datatype in the database which is mapped to oracle.sql.ARRAY object in java.
And in order to create oracle.sql.ARRAY I need java.sql.Connection as shown below
oracle.sql.ARRAY pTable = new oracle.sql.ARRAY(desc, connection, netidarray);
I am executing my stored procedure like this:
ArrayDescriptor desc = null; CallableStatement cs = null;
String[] netidarray = {"00-AOL-T1-N003"};
desc = ArrayDescriptor.createDescriptor("VARCHAR32ARRAY", conn);
oracle.sql.ARRAY pTable = new ARRAY(desc, connection, netidarray);
cs = conn.prepareCall( "BEGIN updaterevenuenetworkinfo(?,?); END;" );
((OracleCallableStatement)cs).setString(1,"00-AOL-T1-R3");
((OracleCallableStatement)cs).setArray(2, pTable);
cs.execute();
Is there any way of getting java.sql.Connection such that I can use the same connection as in the ApplicationModule?
OR Is there any other way of passing Array of Strings to a stored procedure in the database?
Thanks for the help.
null

Hey..... i have a problem with my phone to use wifi ...first no WiFi appears to be in range and i just discovered that it only connects to wifi when im next to the router....the question is how can i get it to connect without being next to the router??

WHATS WRONG? OR HOW CAN I CONNECT MY PHONE TO WIFI WITHOUT IT BEING NEXT TO THE ROUTER ALL THE TIME?

Then it's likely that you have a hardware issue on your hands. Follow the three r's:
1. Restart: Turn it off and then on again
2. Reset: Hold down the home and power button until the apple logo appears
3. Restore: Connect the device to iTunes and restore it as new. Test the issue and see if it persists.
Don't forget to back up before you restore, so you can keep your data.
If the three r's don't work to solve your issue, you will need to get your phone repaired. To do this, you can go into the apple store or call 1-800-275-2273.

I have dial-up internet service an use hypernet with my service,Firefox does not recogize the hypernet how can I get them to connect?

Kcnet provides a Hypernet to help with my dial-up service,Firefox doesn't allow the hypernet to work,how can I make this work.

AirPort Express 3 is not actually "extending" the network at all, since Apple's "Extend a wireless network" will only allow the wireless signal to be extended one time or one level.
The trick with AirPort Express 3.....which may nor may not be possible due to your home layout.....is that AirPort Express 3 must be about the same distance from Big AirPort as AirPort Express 1 and 2.......AND......it needs to be closer to Big AirPort than it is to either AirPort Express 1 and 2.
That way AirPort 3 will pick up a stronger signal from Big AirPort and it extend the network correctly.

How can i get a VGA connection? I cant find the right cables?

i wish to get a VGA connection for a Projector or stuff like that? I looked on the apple site for a cable but cant find one that has the right port for my computer... any ideas? i have a new Macbook Pro.

Hi tjk,
I am taking advantage of clump´s post, but I have an issue with the following. I looked in my local retailer recently for a DVI to HDMI adapter... but they are out of stock. I need to plug my MacBook Pro to my TV, and then I have a DVi to VGA adapter, and my TV (Sharp Aquous LCD) has an analog PC connection. I tried to see my desktop in the TV, but the TV is not recognizing the Mac... do you if it is feasible to have the TV recognize the Mac through a DVI to VGA adapter?

How can I get airport to connect automatically to wireless network?

I temporarily switched from a DSL internet provider to a cable provider, and then back to my old DSL Internet provider. My g5 iMac computer connects to the network through a wireless Belkin router.
Since I switched Internet providers, every time I turn on my computer, it no longer automatically connects into the wireless network. Instead, to connect I now have to manually select the network.
I'd really appreciate tips on automating this step. My kids use this computer and due to parental restrictions, they do not have rights to connect to the network.

Hi there,
Strictly speaking changing how the internet is coming into the wireless router should not affect the wireless and how machines connect to it, but however to get you out of a hole I would say create a new Location for your home and start again.
Basically,Disable your wireless first, then in your network settings there is a drop down box at the top of the panel where you can change and create new locations. Create a new one, then select it and click Apply. Now enable your airport and connect to the wireless, once that is done you should be good to go.
Hope that helps,
Callaghan001

How can I get Firefox to connect to websites that are not Google sites?

This evening Firefox would not connect to my homepage (BBC) or anything in my bookmarks I tried. However, It would connect to anything Google (eg maps, mail etc), and run searches, but would not connect to any sites listed as the results of these searches.
I contacted my internet supplier, who ran various tests, including emptying history, cache/cookies and resetting to default values of Firefox. But nothing solved my problem. It was fine this morning and showed no problems of this type before. I have the latest version of Firefox. My machine is Windows XP, I have the latest IE that can still be loaded - that won't even connect to Google to search, (but perhaps it is unable to because it is too old?)
A couple of months back I had the computer cleaned/tuned, they replaced mcafee with Avast, but I had no problems accessing different websites. I still only run the free version of this. I cannot work out how to access its firewall settings.
So the problem seems to be that the only sites I can access at all Google sites via Firefox...and Mozilla. I know Google is kind of ubiquitous but how I can't imagine how settings could suddenly become altered to be so specific!

Strange problem.
Did you try to start your computer in "safe mode", to see if the problem is still there ?
Who replaced your antivirus and cleaned your computer ? Can they help you ?
For the moment, I see 3 hypothesis :
- a problem of DNS : do you know what it is and where to check them ?
- a problem of Firewall : do you know how to manage the settings of your's one ?
- a problem of security : do you know how to check if there are malwares installed on your computer ? You should do this before any other solutions anyway.
If it doesnt' work, try to install Google Chrome, to see if this browser can go on other websites. If yes, it is time to uninstall/reinstall Firefox.

How can I get a PC connect to my home Airport Extreme network ?

HELP! I'm trying to get a new PC (that we know has a working wireless card-it works fine at Best Buy) to connect to my home Airport Express network?
It's an older Apple Airport, but I have multiple Mac's of various ages, an iPad, 2 iPhone 4S & an iPod Touch and they ALL connect with no problems.
The PC can see the network - it reads the name of it - but won't load any page. I keep getting a "this page can't be displayed" message, and in the windows task bar I can see multiple bars (indicating its connected) but it has the deadly yellow triangle with a ! on it....
I tried calling the manufacturer tech support and they had me delete & re-install drivers, but that did nothing. We took the PC back to Best Buy today and the techs there were able to log onto the internet - the Best Buy techs said that their in-store wireless router was old & slow.
So I am at a loss to get this PC to connect to the internet.
Any suggestions or thoughts are much appreciated.
Thanks
Dave B

Hi ...
Open Keychain Access located in HD > Applications > Utilities
Select Passwords on the left.
Type Wi-Fi (or the name of your Wi-Fi network0 in the search field top right corner of the Keychain Access window.
Then right or control click that keychain then click Get Info then selec the Attributes tab then click: Show password
You may need to entier your admin password to proceed.

How can I get my laptop connected to my printer?

I just installed the HP Officejet 6700 Premium (wireless install). The printer is working fine from my desktop and my imac laptop. I'm trying to get it connected to my Acer Aspire netbook (windows xp). I'm using the add printer wizard but when I browse for a printer, I'm not getting one. I can't install the setup CD because the Acer can't use a CD.

Hi,
Adding the pritner with no software installed will fail, you must install the driver to get the printer working on HP.
As you don't have a CD driver you may download the software from the link below:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-109007-2&cc=us&dlc=en&lc=en...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How can I get the virtual connection from connection pool?

Hi, All, I create the connection pool to Database, then call connPool->createConnetion("scoot","tiger") , it creates a new physical connection to database, not from connection pool. I check the busy number of connection in connection pool, it always 0.
here is my code, please give me advice.Thanks!
int minConn,maxConn,incrConn;
minConn = 4;
maxConn = 5; //nMax;
incrConn = 1;
if(env == 0x0)
env = Environment::createEnvironment(Environment::DEFAULT);
if (connPool == 0x0)
connPool = env->createConnectionPool("scott", "tiger","test.oracle.com", minConn, maxConn, incrConn);
// here already has 4 physical connections to database;
Connection con,con2,*con3;
Statement *stmt;
int nBusy = connPool->getBusyConnections();
//nBusy = 0
try
con = connPool->createConnection (szUser, szPassword);
// create a new physical connection to database
nBusy = connPool->getBusyConnections();
//nBusy = 0
con2 = connPool->createConnection ("scott", "tiger");
nBusy = connPool->getBusyConnections();
}catch(SQLExecption ex)
cout<<ex.what();

What you are creating are virtual connections. They do logons using the already existing connections in the pool. The real connections from the pool are picked only before doing a round-trip and released immediately after completing the round-trip. You can see the busyConnetions higher than 1, only when you are using the connections concurrently.

HT3576 How can I get rid of "Connect to itunes to use push notifications" pop-ups. I just had to replace my iPhone 5 and when I did a restore from backup, most of my apps will not let me in becuase I cannot get past the"connect to itunes..." message.

My iPhone 5 was distroyed so I replaced it with a new iPhone 5 yesterday. I did a restore from a backup that i had performed a week ago. When I tried to use the phone several of my apps would not let me in becuase they continually gave me a popup message "Connect to Itunes to use push notifications". I click ok and the popup comes back. I have shut my phone off several times. I have complete closed the apps several times. I have even deleted the apps from my phone and reinstalled. All to no avail. Please help - does anyone know how to fix this?

Yes - I connected my phone to my computer / Itunes and went into the apps section, but from there I have no idea how to manage the push notifications. I even tryied going into itunes that is installed on my phone. I still cannot find anyplace to manage these popups. I have also gone into settings - notifiations - and tried turning all notifications for these apps all off but that didnt work either. Any guidance is MUCH appreciated - Im not sure where to go from here.

How can I get Bridge to connect with my Iphone 5s?

It worked fine with Iphone 4s, but even though the IPhone 5s is connected to my Mac, Bridge will not recognize it. Also, I cannot update to 6.5 in Bridge either for some reason.

Connect your iPhone via the standard USB connector to your computer, open Bridge and if you have not set to open Photodownloader automatically use the command File / Get photo's from camera or use the tiny camera icon with arrow down at in the icon bar top left of bridge window.
This should open Adobe Photodownloader and it should auto select the images and movies but otherwise use the option to select the source. Also study the options available in Photodownloader and use the advance button to get some thumbs of the content on your phone.

How can I get ATV2 to connect to my EVO's WiFi Tether?

Similar Messages

Maybe you are looking for