How can I get calendar appointments sent in Outlook to open properly in Calendar?

When someone sends me an appointment from their PC (Outlook) and I open in Calendar, it brings up an old appointment and I am unable to see the one that was sent to me.  Any ideas?

I want to thank you and Bill Hunt for your prompt replies.  However I don’t think they are on point.  My problem is not with a single photograph but entire project consisting of many photographs, transitions, music, etc.  I actually imported two such projects into my video project in Premier Elements.  One cam in perfectly.  The other however, was bollixed up.  It played fine in Elements, but when I reviewed it in Premier, the music shifted two frames forward, and one picture came in sideways.  There may be more, but these problems alone frustrated me from checking further.  The companion project imported without a hitch and plays as designed.  All photos from both projects were taken on the same trip with the same two cameras.
Again, thanks for your time.  If you have any ideas, I would greatly appreciate ;your input.

Similar Messages

  • HT5624 how can you get your password sent to your email address I do not want to change my password.

    How can you get your password sent to your email address I do not want to change my password.

    If you cannot remember the passcode for the Screen Lock, you will need to Restore the device...
    1)  Connect to iTunes on the computer you usually Sync with and Restore...
    http://support.apple.com/kb/HT1414
    2)  If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/ht4097
    Note on Recovery Mode.
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Once you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • How can I get the cursor's position in a opened file and display a menu?

    Hello,
    I want to make a program by which I will be able to display a panel/pops up menu at the corsor's current position, (In any text/doc file or in the desktop, we can display a menu by right click of the mouse.) Now I want my program to do the same task.
    More clearly-
    1. First I would save some words or sentences in a file(aa.txt).
    2. Then I would open another text file/ a word/ excel/ or any other editor( bb.txt / cc.doc / dd.xls / ee.html ).
    3. While editing or writing something in the opened file, if I click the right mouse button/ press a key (ctrl+space), a menu will appear containing the sentences I saved in the file(aa.txt) previously.
    My program will tell me the cursor's position in bb.txt / cc.doc / dd.xls / ee.html that i opened. And display a menu. my problem is not reading / writing in a file.
    My problem is how can I get the cursor's position in a opened file display a menu at that position by a mouse/key action*.
    Would you please help me on this regard.
    Thanks

    DrClap wrote:
    I think the OP wants to start up an application like MS Word and then operate it from a Java program.Doesn't The Monkey's Paw do that? What a second, according to Wikipedia:
    [http://en.wikipedia.org/wiki/The_Monkey%27s_Paw]
    <quote>
    ...the paw of a dead monkey is a talisman that grants its possessor three wishes, but the wishes come with an enormous price.
    The moral of the story is contained in this description of the paw: "It had a spell put on it by an old fakir," said the sergeant-major, "a very holy man. He wanted to show that fate ruled people's lives, and that those who interfered with it did so to their sorrow."
    </quote>
    So I guess that a non-sequitor ... or is it?

  • How can I get the iPad to sync Outlook 2010 in Parallels via iTunes?

    Hi
    I want to be able to sync my iPad with both iCal on the iMac and Outlook 2010 in Microsoft Office 2010, installed in Parallels 7.  What happens is that when I connect the iPad to the iMac (USB) it syncs directly with iCal via iTunes.  How can I get the iPad to sync Outlook 2010 in Parallels via iTunes as well?  Do I have to download and install another copy of iTunes in Windows 7 in Parallels?
    Appreciate your help.
    Kind regards
    Alani

    Don't think that's possible as iOS devices can only be synced to one iTunes library at a time.
    Is there a specific reason you're using Outlook?

  • How can I get my trash to empty?  Window opens but closes immediately.

    How can I get my trash to empty?  Window opens but closes immediately and there are nearly 9000 items there.

    Hold your click a little longer on the Trash in dock and a popup will appear. Choose Empty Trash.

  • How can I get authentication and authorization through OS X open directory with the Sun ZFS STOR ZS3-2

    how can I get authentication and authorization through OS X open directory with the Sun ZFS STOR ZS3-2
    I have configure NFS, I need help configuring the share that I created in the Sun ZFS STOR ZS3-2 to connect with the OS X Open Directory

    Hi,
        You may  try checking the help page for ldap configuration :
    https://<Appliance_IP>:215/wiki/index.php/Configuration:Services:LDAP
    ZFS Storage supports LDAP, NIS, AD as directory service.
    Hope Open Directory is also based on LDAP and may work in similar fashion.
    Thanks
    Nitin

  • How can I get my wireless keyboard battery access to open. It's like the bloody thing has seized up and won't open?

    How can I get my wireless keyboard battery access to open. It's like the bloody thing has seized up and won't open? Tried the coin...nope.  Tried a screw driver...nope! Even tried WD-40 - nope! Or does this mean it's now in the boat anchor pile!

    They are designed for coins... is this your first time changing the battery? Make sure you are twisting in the right direction and make sure you are pushing down on it and applying pressure at the same time you turn.

  • How can I get Safari 5.1.2 to automatically open pdf files on web pages by using Adobe Reader?

    Safari 5.1.2 always opens pdf files on web pages as a single frame and thus it will not print properly.  How can I get Safari to open all pdfs with Adobe Reader 10.1.1?

    Carolyn,
    Thanks for sending your suggestion on how to solve my problem.  Unfortunately, it did not work for me.  I trashed the file, quit and relaunched Safari, but the problem remained the same.  Although it did not work, I do appreciate that you took the time to try to help me.
    Thanks.

  • How can I get vertex colors on a mesh to work properly on a PDF 3D

    Hi everyone,
    I am working with GeoMagic Wrap 2013, a software for modelling meshes.
    I digitalize objects through a 3d scanner.
    The Scanner can digitalize objects, generating a mesh, either with .stl or .obj extensions.
    .Obj is useful because you can retain the original color of the object you are acquiring when getting the mesh.
    What Wrap 2013 let me do, among other functionalities, is to export the mesh in the .pdf format as a PDF 3D.
    The issue is that what i see in Wrap 2013 is this:
    but what i get when i export them in PDF 3D is this:
    which is unconvenient because the point of this is to provide a potential client with a fully rotatable and zoomable preview of a product he/she is interested in.
    How can i get the original colors to render properly on a PDF 3D?
    Thank you

    Thanks Dave,
    I am not so technical about the subject but what you are saying (and what is written on the topic you liked above), is that is not possible to achieve the result i'd like with my model using PDF 3D?
    What is quite annoying is that many mesh modelling softwares now provide PDF3D export service but practically forcing you to use uniformed colors that are really not suitable for certain use... you can't have a model with the original (or vertex more in general) colors...
    That would be really a pity to say the least, especially considering that after some work time i can have really nice looking models within my sofware and no way to present it to the client except some really "flat" photos :/

  • How can I get a dual layer DVD+R to burn properly?

    I can not get a dual layer DVD+R to burn properly. The disk pops out before it's finished, usually at the end of the multiplexing stage.  iDVD seems to think the disk is still burning for about 20 more minutes although the box says "done".  I tried it with an external DVD burner with the same result.  I'm running the latest iDVD version available on a MacBook Pro running Lion.  Any ideas out there?

    Hi
    Free space on Start-Up (Mac OS) Hard Disk - How much ?
    • for SD-Video and SL-DVD - I never go under 25Gb
    • for DL-DVD I would guess that 50Gb free is safe
    • if HD-material is used (needs space to be downscaled to SD-Vide0 as this is DVD standard) - 4-5 times more
    Yours Bengt W

  • How can I get spam mail sent straight to trash on my iPad and iPhone.  Have managed to set rules on my iMac but not the rest.

    How can I set up rules to get spam emails sent straight to my trash when I am using an iPhone4S or iPad3?  Have managed to do this on my iMac but can't see a way to do it on the other devices.  Getting about 50 a day recently using my email address but not my name in the messages - no idea why this has started but it is annoying!!

    You cannot set rules on the iPad or the iPhone for mail. The only thing that you can do is to filter spam mail in your webmail settings using a web browser. The rules that set up in the mail app on the Mac do not sync across devices, those are rules for inside the mail client itself on the Mac.

  • How can i get icloud to synch between outlook on my pc and my iphone 5?

    I have loaded icloud on my PC and it's on my i5 phone.  However, I can't get my calendar and contacts to synch between my PC and phone.  Any suggestions?

    Make sure to go into your icloud panel on your PC (in control panel) and on your phone (settings) and check everything you want to synch.  Curious to know if this works for you as mine was working perfectly until last week.

  • How can I get Premier to locate files automatically upon opening a project?

    I have worked several days on a project in Premier 13, importing several dozen movies and stills.  The program had no trouble locating the files that I had imported whenever I closed the program and reopened it.  Last night I turned off my computer. Tonight when I opened the project the program could not locate the files. I found I can locate them manually, but this is extremely tedious and time consuming. How do I get Premier to locate these files as it did before?

    Where are the files located?
    If they are on a device that is not part of the internal system of your computer (ie, an internal hard drive) it could be that the program is having trouble re-mapping its way to these files each time you restart your computer.

  • How can I get any of the search requests to open in a new tab and not the current window. I have just downloaded the new FF8

    In my previous version of FF, whenever I did a search with any search engine the results opened in a new tab. Now with FF8 the results open in the current window which really is inconvenient. How do I get the search results to open in a new tab instead?
    I have Windows xp FF8

    To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
    If you see a warning then you can confirm that you want to access that page.<br />
    *Use the Filter bar at to top of the about:config page to locate a preference more easily.
    *Preferences that have been modified show as bold (user set).
    *Preferences can be reset to the default via the right-click context menu if they are user set
    *Preferences can be changed via the right-click context menu: Modify (String or Integer) or Toggle (Boolean)
    Use the Filter at the top of the page to locate this pref: <b>browser.search.openintab</b>
    If the value of the browser.search.openintab pref is false then toggle the value to true with a double click on that line.
    See also http://kb.mozillazine.org/about:config

  • How can I get calendar to print with appointments?

    My iCloud calendar prints blank dates on my pc.

    The Photo checkbox is one of those shown in the Print dialogue, which appears when you select Print from the File menu in Contacts.
    It's not a question of printing a single contact with its photo, but of printing a list of contacts with their corresponding photos. This seems not to work in Mountain Lion, despite the presence of the Photo checkbox.

Maybe you are looking for

  • Regarding Split PO

    hi every one i am having an issue with split purchase order when i was copying a document from purchase request only one document is getting added but in my case i will get purchase requests from all my four branches to a single vendor i want to add

  • Date and time stamp with Sony HDR CX7

    Hi, I am trying to figure our how to find date and time stamps for individual clips. My workflow is as follows: I use disk utility to make a disk image (.dmg) of the memory stick and import the clips from this disk image. Everything works fine, but I

  • Why is JVM faster than CLR?

    hi i wrote a N-body algorithm in both Java and C# (shown below). i executed it using .NET CLR and JDK1.4.1. in JDK it is twice as fast as .NET (on win2000). now i am trying to find out why is it so?? the interesting thing is that i ran some other alg

  • Form & Case problem

    I have a form it submits a registration case then redirects to another page that has different form on it. This form is meant to create another case for a job application and it does so correctly if you navigate to that page by clicking the page link

  • Delete (cancel) sales order with subsequent document - delivery

    Hello, The question I have is probably very simple, but still need an advice (or confirmation for described approach) To make it easier I will use names for SO (like S01,SO2...etc) and deliveries. Customer created 1 sales order (SO1) and from it Outb