How can I get CDP neighbor information from access point reports in Cisco Prime 2.0

How can I get CDP neighbor information from access point reports in Cisco Prime 2.0? I have looked through all the reports and I cannot find a report that gives me the CDP neighbor information of an access point. I thought that information was in there, however I cannot seem to find it.
Thanks in advance!

Hi
You can get this from an inventory report in PI (Select Report Type AP). Here is an example of PI 2.1 works for me. Once you export this into excel you can sort based on controllers & filter the single controller connected AP you want.
Regards
Rasika
**** Pls rate all useful responses ****

Similar Messages

How can I get alerts if a Wireless Access Point has been disconneted from the network?

How can I get alerts if a Wireless Access Point has been disconneted from the network?
Is it possible to get alerts via email from the WLC or WCS if Access-Point has been removed from the network?
Thanks in advance.

Hi,
The below link will answer ur question!!
http://www.cisco.com/en/US/docs/wireless/wcs/7.0/configuration/guide/7_0event.html#wp1229996
Please dont forget to rate the usefull posts!!
Regards
Surendra

I just pressed the wrong button to erase of my IMac, how can I get back all information from my computer ?

I just pressed the wrong button to erase of my iMac, how can i get back all information ?

Possibly through a data rescue service (can cost a four-figure amount) if you didn't have an external backup.
But you must stop using that Mac immediately, or your data will be over-written.

I change my iPad ID, due to I forgot my iCloud passward , how can I get my old information from my old iCloud?

I forgot my iCloud password,and changed a new app ID and password. But I lost all my records in the old iCloud , how can I get it back.

You need the password.

How can I get the XML structure from a flat structure?

Hi all,
in my XI SP 12 I use a JMS adapter to read information using the WebSphereMQ transport protocol.
The structure that I receive have this format:
<Name_A.KeyFieldValue><Name_A.fieldName_A1_Value>...<Name_A.fieldName_AN_Value>
<NumberRecordType_B><NumberRecordType_c>
<Name_B.KeyFieldValue><Name_B.fieldName_B1_Value>...<Name_B.fieldName_BN_Value>
<Name_B.KeyFieldValue><Name_B.fieldName_B1_Value>...<Name_B.fieldName_BN_Value>
<Name_C.KeyFieldValue><Name_C.fieldName_C1_Value>...<Name_C.fieldName_CN_Value>
<Name_C.KeyFieldValue><Name_C.fieldName_C1_Value>...<Name_C.fieldName_CN_Value>
the problem is that in this structure each line is not separated by a carriage return or a comma, I have all the information in a single line:
<Name_A.KeyFieldValue><Name_A.fieldName_A1_Value>...<Name_A.fieldName_AN_Value><NumberRecordType_B><NumberRecordType_c><Name_B.KeyFieldValue><Name_B.fieldName_B1_Value>...<Name_B.fieldName_BN_Value>...<Name_B.KeyFieldValue><Name_B.fieldName_B1_Value>...<Name_B.fieldName_BN_Value><Name_C.KeyFieldValue><Name_C.fieldName_C1_Value>...<Name_C.fieldName_CN_Value>...<Name_C.KeyFieldValue><Name_C.fieldName_C1_Value>...<Name_C.fieldName_CN_Value>
and the customer don't want to insert a line separator.
Then, the question is:
How can I get the XML structure from this structure?
If possible, I don't want to develop new Module and add it in the JMS Module Sequence.
PS I have already read the article "How to Use the Content Conversion Module with the XI 3 J2EE JMS Adapter.pdf" and it doesn't seem to help me.
Best Regards,
Paolo

To get context parameters from your web.xml file you can simply get the ActionServlet object from an implementing action object class. In the perform (or execute) method make the following call.
ServletContext context = getServlet().getServletContext();
String tempContextVar =
context.getInitParameter("<your context param >");

How can we retrieve the Payload information from B2B

Hello,
We are trying to send the payload information back to the client for a failed BPEL Transaction from B2B's b2b_instancemessage view. We are enqueing messages to IP_OUT_QUEUE using BPEL. We see the payload coming correctly in the B2B Business Message Reports. But we don't see the payload coming in the b2b_instancemessage view for failed B2B transactions. How can we see the payload in b2b_instancemessage view for failed B2B transactions as well? or How can we retrieve the Payload information from B2B?
Any help is greatly appreciated! Thanks. - Sam.
Edited by: user12049162 on Dec 4, 2009 2:04 PM

I am not sure about the PDK API to get the group name. But using LDAP API its easy to get the User Group.
If you find the answer to get the group name using PDK API, Please update in forum. It will really help others.
--Balaji S

My computer crashed and I lost everything. It was the only computer with Sync on it and I cannot get my recovery key: how can I get all my bookmarks from that Sync account?

My computer crashed and I lost everything. It was the only computer with Sync on it and I cannot get my recovery key: how can I get all my bookmarks from that Sync account? I have a ton of bookmarks/saved password and the only way to get on sync is create a new recovery key and lose all of my information.
Is there any way to get my stuff back without creating a new recovery key and losing all my old stuff?

It has always been very basic to always maintain a backup copy of your computer for just such an occasion.
Use your backup copy to put everything back.

How can I get the disk information in Solaris 9

I am new to Solairs9. I use the format utility to list my partitions, but there are many unassigned partitions. I pasted the format response below:
# format
AVAILABLE DISK SELECTIONS:
0. c1t1d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@8,600000/SUNW,qlc@4/fp@0,0/ssd@w21000011c6413e10,0
Specify disk (enter its number): 0
format> partition
partition> print
Current partition table (original):
Total disk cylinders available: 14087 + 2 (reserved cylinders)
Part Tag Flag Cylinders Size Blocks
0 root wm 302 - 13482 63.96GB (13181/0/0) 134129856
1 swap wu 0 - 301 1.47GB (302/0/0) 3073152
2 backup wm 0 - 14086 68.35GB (14087/0/0) 143349312
3 unassigned wm 0 0 (0/0/0) 0
4 unassigned wm 0 0 (0/0/0) 0
5 unassigned wm 0 0 (0/0/0) 0
6 unassigned wm 0 0 (0/0/0) 0
7 home wm 13483 - 14086 2.93GB (604/0/0) 6146304
The part number from 3 to 6 are unassigned. What does this mean? How much space of these unassigned partitions? How can I mount these unassigned partitions to my local directories?
Thanks.

"+How can I get the disk information in Solaris 9+ "
This was cross-posted to the Solaris 9 forum as well.
http://forum.java.sun.com/thread.jspa?threadID=5223643

HT204380 How can I get a contact information if I deleted it on Accident?

How can I get a contact information if I deleted it on. Accident from my iPod touch 5g

That was Great. Can't thank you enough.
I'm new to the apple world, and I was having a real hard time getting tis to work. Your solution worked perfectly!!
How about one more question.... Can't get my Iphone or Ipad to connect using Bluetooth, I get a message on the iphone/ipad saying they are not compatible with the Macbook Pro???? any suggestions?
Thank for the help on the contacts..
Cleve298..

How can i get back my photo from icloud?

hello,
same question how can i get back my photo from icloud?
thanks

iCloud.com does not have a photo's tab. Photo stream is intended to stream images to your computer via iPhoto 11, or to another iOS device. See this article for more detailed information - http://support.apple.com/kb/HT4486.

How can i get the all values from the Property file to Hashtable?

how can i get the all values from the Property file to Hashtable?
ok,consider my property file name is pro.PROPERTIES
and it contain
8326=sun developer
4306=sun java developer
3943=java developer
how can i get the all keys & values from the pro.PROPERTIES to hashtable
plz help guys..............

The Properties class is already a subclass of Hashtable. So if you have a Properties object, you already have a Hashtable. So all you need to do is the first part of that:Properties props = new Properties();
InputStream is = new FileInputStream("tivoli.properties");
props.load(is);

How can I get an itunes movie from macbook to apple tv via airplay, how can I get an itunes movie from macbook to apple tv via airplay

how can I get an itunes movie from macbook to apple tv via airplay?

You don't use Airplay. You set up Home Sharing on both and under the Computers section of AppleTV you'll then find it under Movies (or Rentals if rented), assuming it's in a compatible format.
AC

How can I get the "text" field from the actionEvent.getSource() ?

I have some sample code:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.util.ArrayList;
public class JFrameTester{
     public static void main( String[] args ) {
          JFrame f = new JFrame("JFrame");
          f.setSize( 500, 500 );
          ArrayList < JButton > buttonsArr = new ArrayList < JButton > ();
          buttonsArr.add( new JButton( "first" ) );
          buttonsArr.add( new JButton( "second" ) );
          buttonsArr.add( new JButton( "third" ) );
          MyListener myListener = new MyListener();
          ( (JButton) buttonsArr.get( 0 ) ).addActionListener( myListener );
          ( (JButton) buttonsArr.get( 1 ) ).addActionListener( myListener );
          ( (JButton) buttonsArr.get( 2 ) ).addActionListener( myListener );
          JPanel panel = new JPanel();
          panel.add( buttonsArr.get( 0 ) );
          panel.add( buttonsArr.get( 1 ) );
          panel.add( buttonsArr.get( 2 ) );
          f.getContentPane().add( BorderLayout.CENTER, panel );
          f.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
          f.setVisible( true );
     public static class MyListener implements ActionListener{
          public MyListener() {}
          public void actionPerformed( ActionEvent e ) {
               System.out.println( "hi!! " + e.getSource() );
               // I need to know a title of the button (which was clicked)...
}The output of the code is something like this:
hi! javax.swing.JButton[,140,5,60x25,alignmentX=0.0,alignmentY=0.5,
border=javax.swing.plaf.BorderUIResource$CompoundBorderUIResource@1ebcda2d,
flags=296,maximumSize=,minimumSize=,preferredSize=,defaultIcon=,disabledIcon=,
disabledSelectedIcon=,margin=javax.swing.plaf.InsetsUIResource[top=2,left=14,bottom=2,
right=14],paintBorder=true,paintFocus=true,pressedIcon=,rolloverEnabled=true,
rolloverIcon=,rolloverSelectedIcon=,selectedIcon=,text=first,defaultCapable=true]
I need this: "first" (from this part: "text=first" of the output above).
Does anyone know how can I get the "text" field from the e.getSource() ?

System.out.println( "hi!! " + ( (JButton) e.getSource() ).getText() );I think the problem is solved..If your need is to know the text of the button, yes.
In a real-world application, no.
In a RW application, a typical need is merely to know the "logical role" of the button (i.e., the button that validates the form, regardless of whether its text is "OK" or "Save", "Go",...). Text tends to vary much more than the structure of the UI over time.
In this case you can get the source's name (+getName()+), which will be the name that you've set to the button at UI construction time. Or you can compare the source for equality with either button ( +if evt.getSource()==okButton) {...}+ ).
All in all, I think the best solution is: don't use the same ActionListener for more than one action (+i.e.+ don't add the same ActionListener to all your buttons, which leads to a big if-then-else series in your actionPerformed() ).
Eventually, if you're listening to a single button's actions, whose text change over time (e.g. "pause"/"resume" in a VCR bar), I still think it's a bad idea to rely on the text of the button - instead, this text corresponds to a logical state (resp. playing/paused), it is more maintainable to base your logic on the state - which is more resilient to the evolutions of the UI (e.g. if you happen to use 2 toggle buttons instead of one single play/pause button).

How can i get the max rpm from cpu fan??

how can i get the max rpm from my cpu cooler regarding that i don't have a speed controller attached to the cpu fan ,,, ?? please make things clear for me
thanks

if you have not reduced it by using a speed controller either hardware or software or by the 7v mod its already going as fast as it will at 12 v dc you cannot speed it up only slow it down
need more air get a different cooler/fan

How can I get the edited pictures from the thumbnails to full size?

I upgraded to iPhoto 11, the thumbnail photos show my previous edits, but when I click on the photo to make it bigger, it reverts back to the unedited, original picture. How can I get the edited pictures from the thumbnails to full size?

Verify you are using iPhoto11 ver 9.5
if not run the >Software update or check your apps folder and make sure the correct iPhoto is launched, not an older ver.

How can I get CDP neighbor information from access point reports in Cisco Prime 2.0

Similar Messages

Maybe you are looking for