How Can I get Concurrent program parameters in the bursting output file????

I have rtf template. I am passing parameter PC_REPORT_TYPE,pd_week_ending_date in my concurrent program. In rtf header I am passing this parameters as <?PC_REPORT_TYPE?> and <?param@begin:pd_week_ending_date?><?xdofx:to_char(to_date(replace(substr($pd_week_ending_date,1,10),’/’,’-‘),’YYYY-MM-DD’),’MM/DD/YY’)?> .
I am getting the values in my report which is generated from this concurrent program. But I am not getting these values in my bursting output file which is generated from that previous concurrent program.
Thanks in advance....

The same exact video played back perfecly fine 2 weeks ago. The same project too, with no changes at all. I have a Nvida card too and have made no changes to that either. Not sure everything worked a couple weeks ago. Then every once in a while I started having issues, but I could just close and reopen the project and it would be OK. Now, I can't get any vieo at all. If I double click in the monitor box the frame I am on pops up but nothing plays, I just get one frame while audio plays with no issue.

Similar Messages

Computer Crashed with CS4 - How can I get these programs to my new computer?

Computer Crashed with CS4 - How can I get these programs to my new computer?

You will want to install them from the installation media.

How can I get this program to work -- Adobe Send or Adobe SendNow

How can I get this program to work? I have used Adobe SendNow successfully for several years and am on automatic renewal and getting nothing but frustration for my money! I have been unsuccessful at sending anything in the past several months. Today while working on a deadline and many unsuccessful attempts to upload files, I signed up for a free trial at a competitor in order to get my files sent. Want a refund -- or better yet, keep my money and get it to work right again.

You can't.
Sounds like it he gave you a stolen iPhone or at least a worthless one.

I am trying to burn a .mov file from fcp xpress timeline to a dvd. The popup message I receive prior to inserting the dvd is that I need 20.05 gb of space available on dvd (a 1.25 min). How can I get this program onto a dvd that shows a max of 8.5gb?.

I am trying to burn a .mov file from fcp xpress timeline to a dvd. The popup message I receive prior to inserting the dvd is that I need 20.05 gb of space available on dvd (a 1.25 min program). How can I get this program onto a dvd (where the max available gb's for off the shelf dvds-r) shows a max of 8.5gb?. Please help. Thank You!

You have posted your question in the Final Cut Pro X forum. You want to be in this forum instead; https://discussions.apple.com/community/professional_applications/final_cut_expr ess_hd
Good luck.
Russ

HOW can I get a GOOD copy of the iTunes software for my desktop?

I solved MY corrupt firmware file problem!
A little background- I deleted all Apple, iPod, and QuickTime software from my desktop PC and reloaded iTunes for the (I don't know how many) time. Same thing! Downloaded it again and used the "erase iTunes" option then reloaded again and had the same result. I then cranked up my old laptop and when I got to the Apple website, I was offered an opportunity to download QuickTime and took it. It came with iTunes if I wanted, so I took that too. After the download, I plugged in the Nano and it restored to Windows format. I did not want it to sync to the laptop, so I took it to the desktop and was able to sync with Nano and downloaded my tunes. TALK ABOUT HOKEY!
WHY does the restore program have to be resident on MY PC or MAC anyway? Seems like I could just as simply download a current copy from Apple every time I want to restore.
WHY doesn't Apple do something about this problem and let users know about the solution? Do they not want to grab a share of the Windows business? Here is an excellent opportunity!
Now for my question.
HOW can I get a GOOD copy of the iTunes software for my desktop? I now know it works! Is there a hidden file or folder I should delete before I make my next attempt to cleanup and download? Why isn't this information public?
I spent over 30 years in the DP industry. PC is not my area of expertise, but this must be the most frustrating experience of my years.
desktop Windows XP

I THINK I have solved the problem. Can't be 100% because I don't want to try a restore. At least the Apple home page lites up correctly with quicktime now. It hadn't in the past.
Thank you for your assistance. - LRB
desktop Windows XP

Than how can i get java class by using it's class file?

Hi
After compilation of a java program, it creates a class file.
After getting class file suppose class file has been deleted.
Than how can i get java class by using it's class file?
Thanks in advance.

get a decompiler and run your class file through it--I'll assume you want the source code back and that you are not trying to recover a missing class file by attempting to use the class file that is missing--if it's missing, then I've not a clue on how to get it back by using what is already missing.
BTW: many of your compilers have source control--if it does, just restore your missing file.

How can I get a new copy of the Voicemail app for my LG Spectrum?

How can I get a new copy of the Voicemail app for my LG Spectrum? It no longer works....the screen say Loading please wait....the
!Visual Voice Mail - A Visual Voice Mail error has occurred. Please try again. OK I've tryed several times with the same message. I've
deleted the app from my screen and replaced it from the Apps Library....still the same message.
I cannot find an answer on MyVerizon. Any ideas?
Thank you,
Dee

OK, at least 3 is working.
I don't know how you have a Tape Recorder icon on your Home Screen. I cannot add one myself. But, I am running Holo Launcher in replacement of the default LG "Optimus" User Interface. It's much better in my opinion.
Try long pressing the icon and select Edit and maybe you can change some attribute of the icon.
Another thing you could do, is long-press an empty area of your desktop, to add an icon. Select Shortcut, then Select Contact, and scroll through your contact list and choose the contact that you added for *86.
You realize if you have voice mail you haven't heard, there is a tape recorder icon in the notification bar, which you touch and pull down, then press it to dial voicemail.
If that functionality doesn't work, you MIGHT want to consider doing a factory data reset on your device, but that is going to nuke all your personalizations and cause you work to set up again.

I had my ipod synced to an old computer that I no longer have how can i get all my stuff on the new itunes without erasing it

I had my ipod synced to an old computer that I no longer have how can i get all my stuff on the new itunes without erasing it

Most Windows users don't.
Purchase an external hard drive and use the backup software that comes with it to backup files from your computer.
Buy TouchCopy and install it on your new computer, connect your old iPod and transfer your songs to your computer.

I had an apple ID which I used for iCloud. I upgraded the iCloud account and changed the apple ID to a @me address. Now I can't view what was in my original apple ID account. How can I get what was stored on the original account?

I had an Apple ID which I used for iCloud. I upgraded the iCloud account and changed the apple ID to a @me address. Now I can't view what was in my original apple ID account. How can I get what was stored on the original account?

cathorio wrote:
I recently changed my lap top. My problem is the new lap top won't accept my apple I D it asked me to sing up for a new one which I did.
I am puzzled by this. The laptop doesn't need the Apple ID - but iTunes does. I could be missing something but ....
Why would you not be able to use your existing Apple ID and iTunes account on a new laptop? If you authorized the computer - you should be able to use your existing account - unless you already had 5 computers authorized with the existing ID - and that was why iTunes would not accept the ID. However, I'm sure that you would have received a popup message from iTunes telling you that you had reached the limit.
I just received a new MBP and my daughter did as well. My entire family shares an Apple ID and we had no issues at all with my Apple ID and iTunes on our new computers and I did not have to sign up for a new account. Did you even try the old ID?

How can I get an excel spreadsheet onto the iPad and make changes to it? I need this for a meeting this afternoon.

How can I get an excel spreadsheet onto the iPad and make changes to it during my meeting this afternoon?

I just bought splashtop, you have to have your home computer online,and download the pc version. I have used it ot watch movies and to "go to work" on my ipad. It controls the desktop through the ipad. Whiteboard by splashtop does that and more and is on sale. The education director at the hospital I work at is using that one.
Splashtop 4.99 remote desktop(or laptop) control. Whiteboard 9.99 is remote control and more 9.99
Julie

I moved iTunes folder location, now all my personal song ratings and playlists are gone. How can I get them back? All the iTunes files are intact, just in a new location. Running iTunes 11.1.5.5

I moved iTunes folder location, now all my personal song ratings and playlists are gone. How can I get them back? All the iTunes files are intact, just in a new location. Running iTunes 11.1.5.5 on Windows 7

Put everything back the way it was.
Them move the folder correctly.
http://support.apple.com/kb/ht1364

Somehow my iTunes app has been put into the trash. How can I get this and all of the stuff that was in it back to my Application folder? I try to drag it out of trash, but it won't work.

Somehow my iTunes app has been put into the trash. How can I get this and all of the stuff that was in it back to my Application folder? I try to drag it out of trash, but it won't work.

Also, when I do try to drag it out of the Trash to put it back into Applications (on the Finder sidebar), it asks me to authenticate with the administration password. I enter it, and then a window appears saying that I can't do that because I do not have permission to modify iTunes. Please help.

How can we get a alert message in the current browser we are using the mom

how can we get a alert message in the current browser we are using the moment we have entered some data in
the table...
I need a popup alert the moment a new record is added in a table... in apex database is 11g xe..
The idea is I am using a apex application. .The moment new data is added in the table ..I am alerted by a message window..that a new record has been added...
Thanks
Edited by: pauljohny on Jun 11, 2012 10:23 AM

pauljohny wrote:
how can we get a alert message in the current browser we are using the moment we have entered some data in the table...
"Current browser"? When viewing anything, or just when using an APEX app?
Ans .. Just when using apex app....even if the apex app is minimised ..The current browser will be the one where I am using apex app...
What i am looking for some scheduler .. to check ..in the table every 5 minute for change if there is a change..then a popup alert be shown...
Split it into [at least] 2 components, database and browser. I'd expect someone calling themself a "DBA Architect" to have some ideas about the database side of things, even if not clued up on JavaScript and AJAX?
I dont think its a database isssue... When i say to check every 5 minutes ..it could be easily done via dbms_scheduler ...I am having issue in getting the popup alert message...
in apex... Dont know wether there is a plugin like modal window(available from skill builder) which shall help in this scenario,.Or might be have to use java scripting and ajax ..
and if it is that (Java scripting and Ajax) .....then shall have to be familiar with java scripting and Ajax...and this shall be a bit time consuming..
Had a feeling this could be accomplished via java scripting and ajax.. ...but still looking for some easy way..

How can you get audio for books on the kindle

how can you get audio for books on the kindle

The audio inputs on Macs are line level inputs and not mic inputs. You need a mic with a built in preamp (battery powered) or more conveniently a USB mic or bluetooth headset.

How can I get my iPad to connect the love film app to my Apple TV?

How can I get my iPad to connect the love film app to my Apple TV?

Have you confirmed that the app supports AirPlay? If it doesn't, then you'll have to connect via screen mirroring. See:
http://support.apple.com/kb/HT4437
and
http://support.apple.com/kb/HT5209
Regards.

How Can I get Concurrent program parameters in the bursting output file????

Similar Messages

Maybe you are looking for