How can I get dock connector to turn off on air play. There is no longer a choice for sound to be displayed on iPad. I do not own outside speakers. Have already reset. Thanks

How can I get dock connector to turn off on air play. There is no longer a choice for sound to be displayed on iPad. I do not own outside speakers. Have already reset. Thanks

Slow, intermittent.  Sometimes bootable sometime not. Odd behavior.
Sounds to me like a classic case of your HD failing.
Your SMART status may still show verified, with no errors on the Apple Hardware Test, Disk Utility shows no problems on Disk Repair-  this is of no help.
I trust you have a good back-up and a bootable clone.
http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/

Similar Messages

  • My 6th gen nano will go to sleep after 1min. if I don't keep touching the sceen or pushing the buttons. How can I get this function to turn off?

    I can't relax and listen to music as my nano will go to sleep after just one minute of not touching it. This is really irritating and needs to get fixed. Can anyone help? I've read the manual and it doesn't say anything about my problem.

    Your nano is pausing playback when the screen goes dark. The reason for this is that it is not detecting your headset. You may be able to hear music, but the headset jack is not inserted enough for the nano to detect that it is there (or something is blocking the connection). Here are your three options:
    Insert the headset jack harder. Most folks find that this solves their problem. If you can see ANY of the silver of the plug when it is inserted, it is NOT fully inserted. You should feel and hear a click" when it is fully inserted.
    Clean out the crud in the headset port. If you have tried #1 and it just won't insert all the way, it is likely that you have crud in your headset jack. Shine a light in there. The entire inside of the jack is white, so if it looks dark down at the bottom, there is probably crud down there. You can try blowing it out or using canned air. Just understand that shoving anything else in there to clean it out will be taking your warranty into your own hands! However, I have cleaned mine out using whatever was handy and small enough to fit in there and so far so good. Your results may vary!
    Take it to the Apple store. If you have really tried with 1 and 2 and it is still happening, then there might just be something up with your headset port or your headset jack. If it is the headset jack, you can look closely at that and be pretty sure if that is the problem. Try another headset to make sure. If you have worked all the way through to this point and it is still happening, it is time to take it to the Apple store.
    i
    PS: For more on this, with pictures, see this post: https://discussions.apple.com/thread/2765444?start=30&tstart=0

  • How can I get all of my music off of my laptop and onto an external hard drive?  I bought a new hard drive for it but it got turned into a Time Machine drive...

    how can I get all of my music off of my laptop and onto an external hard drive?  I bought a new hard drive for it but it got turned into a Time Machine drive...  I want to have all of my music on the external hard drive, and NOT on my macbook pro.  Thanks everyone

    Hello lramospsych,
    To move your iTunes media library to a different location, take a look at the article below to walk you through that process. Make sure that you have everything organized before you move everything over.
    iTunes for Mac: Moving your iTunes Media folder
    http://support.apple.com/kb/ht1449
    Regards,
    -Norm G.  

  • How do I get my 4S to turn off?  The on/off button seems to be frozen.  Help?

    How do I get my 4S to turn off?  The on/off button seems to be frozen in the down position.

    Make a Genius Bar appointment. In the meantime go Settings > General > Accessabilty > Assistive Touch.
    There's a lock screen option for aid when hardware fails.

  • How can i get my imac proceed to home page from restarting endlessly?  it will start then start booting then chime then bck to step one, not even hitting the start up page.... plssss help!

    how can i get my imac proceed to home page from restarting endlessly?  it will start then start booting then chime then bck to step one, not even hitting the start up page.... plssss help!

    Hi
    My Powerbook was the same. Only fix is to reinstall OSX from the install CD but be sure not to pick the Format and install clean. Once you boot with the install CD pick the preserve user data and settings.
    On My machine the reinstall looked perfect. My network, email, files and all the programmes were all there. Most apps worked fine but Adobe CS2, Virtual PC and NetBarrier all needed reinastallation as they reported a few files or registration was missing. I went for the 10.4.3 upgrade again and it worked fine.
    Good luck
    D

  • How can I get a fullscreen version of my iMovie to play for friends?

    I have uploaded my 8 minute iMovie 08 to my .mac site. When I send the link to friends, they see the movie play in a very small window. It also is fuzzy and unfocused. How can I get a fullscreen version of my iMovie to play for friends? Also the volume of the segment is very low even though when I made it it played normally.

    Suggest that you cross-post in the iMovie '08 Forums.

  • How can i get itunes to quit skipping to the currently playing song when i'm working on the library somewhere else?

    how can i get itunes to quit skipping to the currently playing song when i'm working on the library somewhere else?

    You might be able to achieve what you want by using Party Shuffle. Set the source for Party Shuffle to be the playlist you want to listen to or add the tracks you want to listen to by control clicking on them and selecting Add to Party Shuffle. Once everything is in Party Shuffle, you can rearrange them to your satisfaction. As the songs are played, they'll roll off the queue. You can quit iTunes and even when you restart, all your songs will be there, in the order you want, waiting for you to hit play.

  • Hello! I have a huge question about how can I get connected my iphone 4 with my car Is there any opption on find my car application? I have a Volvo xc60 and I want to be connected all the time with my iphone. Can I do that?

    Hello! I have a huge question about how can I get connected my iphone 4 with my car Is there any opption on find my car application? I have a Volvo xc60 and I want to be connected all the time with my iphone. Can I do that?

    Hello. I can say that you have a quite strange „huge question”… It’s non-sense to stay connected with your car which is hundreds miles away. Unless…
    I have a theory. You don’t want to controll your car, you want to controll somebody who is driving the car. Volvo XC 60 is a nice family car, usually used by married men between age of 35-45, probably with small children, so it’s very unlikely that you want to controll your teanage kid, mainly because probably even if you would give him/her to drive the car in the neighborhoud, I don’t think that he/she would be „several hundred miles away”…  If your child is not young teneage anymore, and he/she has his/her own life, but you want to control him/her, that is sick… So I am convinced that you want to controll your husband who probably travelling often! Am I wright?
    Isnt’t nice at all! Would you like if you would be monitorized in such way? I bet you don’t!
    Anyway, iPhone is smart, you can use for many things, but come on, you really were thinking that there is such kind of application???
    What could you do it's to put in the car a GPS survelling system, however I don't think that you could do it without your husband knowledge, otherwise he won't be able to start the engine...

  • How can I get this function to fire off last?

    In the following code, there are two buttons on the stage- "button1" and "button2". 
    I want to get the buttons to change frames and THEN have the "playerChange" function fire off.
    Currently, the "playerChange" function fires first. Moving the function  either renders the code inoperable or
    returns error messages.
    function buttonChange (e:MouseEvent)
    {if    
                    (e.target.currentFrame == "frame1" )
             if (e.target==button1) (playerChange)
                     (e.target.gotoAndStop(player.currentFrame + 1)) 
               else{player.gotoAndStop(player.currentFrame)
              if (e.target==button2)  (playerChange) 
                    (e.target.gotoAndStop(player.currentFrame + 1))
              else{player2.gotoAndStop(player2.currentFrame)
    button1.addEventListener(MouseEvent.CLICK,buttonChange );
    button2.addEventListener(MouseEvent.CLICK,buttonChange);
    Note:this is an abridged version of the code. The code I'm actually using uses 20 buttons and about 8 conditionals for each button, so e.target is more convenient than writing a command for each button.

A: How can I get this function to fire off last?

the code is very hard to understand
it's badly formatted
{}'s don't match
you aren't calling a playerChange function
this is my guess at something that might work for you
function buttonChange (e:MouseEvent)
          if(e.target.currentFrame == "frame1" )
                    if (e.target == button1)
                              e.target.gotoAndStop(player.currentFrame + 1);
                              playerChange();
                    else
                              player.gotoAndStop(player.currentFrame);
                              if (e.target == button2)
                                        e.target.gotoAndStop(player.currentFrame + 1);
                                        playerChange();
                              else
                                        player2.gotoAndStop(player2.currentFrame)
button1.addEventListener(MouseEvent.CLICK,buttonChange );
button2.addEventListener(MouseEvent.CLICK, buttonChange);

the code is very hard to understand
it's badly formatted
{}'s don't match
you aren't calling a playerChange function
this is my guess at something that might work for you
function buttonChange (e:MouseEvent)
          if(e.target.currentFrame == "frame1" )
                    if (e.target == button1)
                              e.target.gotoAndStop(player.currentFrame + 1);
                              playerChange();
                    else
                              player.gotoAndStop(player.currentFrame);
                              if (e.target == button2)
                                        e.target.gotoAndStop(player.currentFrame + 1);
                                        playerChange();
                              else
                                        player2.gotoAndStop(player2.currentFrame)
button1.addEventListener(MouseEvent.CLICK,buttonChange );
button2.addEventListener(MouseEvent.CLICK, buttonChange);

  • How come I get 3G when I turn off my LTE?

    How come I get 3G when I turn off my LTE but when my friends turn their LTE off they get 4G? I have Verizon as my phone's carrier.

    Because you have a Verizon iPhone and when you turn off LTE it falls back to their EVDO network and correctly shows 3G. Your friends either have a T-Mobile or AT&T iPhone and they refer to HSPA+ as "4G".
    A Sprint iPhone will behave exactly like yours.

  • The wi-fi button on my iPad 2 is not functioning.  I have tried resetting the network, worked for 5 minutes. Am not able to connect to internet to reset to factory.  What else can I do?

    The wi-fi button on my iPad 2 is not functioning.  I have tried resetting the network, worked for 5 minutes. Am not able to connect to internet to reset to factory.  What else can I do?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
    http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • How can I get my wifi to turn on.   It remains greyed out

    How do I get my wifi to turn on?   It remains greyed out.   I have tried Network reset.     Can anybody help please?

    Hello POLLYMER,
    Thanks for the question. I understand that your Wi-Fi option on an iPhone 4S is greyed out. The following article explains this issue and potential resolution:
    iOS: Wi-Fi settings grayed out or dim
    http://support.apple.com/kb/TS1559
    Follow these steps to resolve the issue:
    1. Verify that airplane mode is off by tapping Settings > Airplane Mode.
    2. Reset the network settings by tapping Settings > General > Reset > Reset Network Settings.
    Note: This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings
    3. Ensure that your device is using the latest software. To do so, connect your device to your computer and check for updates in iTunes.
    4. If your issue is still unresolved, perform a software restore in iTunes.
    If you are still unable to turn Wi-Fi on, please contact Apple for support and service options.
    Thanks,
    Matt M.

  • My ipod touch g2 was fulling charged last night and this morning the screen is completely black and I cant get it open and when I charge it nothing changes.how can i get my ipod to turn back on

    my ipod touch g2 was fully charged last night and on.  I think i fell asleep on it and this morning the screen is blank and I cant get it to power up.  charged it again and still nothing.  How can i get it to power back up

    have you tried holding the power button and the home button for 30sec till you see the apple logo?

  • How can I get my bookmarks and mailboxes off my old iBook G4 that crashed?

    My OS crashed. I reinstalled it, but still could not access anything. I took the computer to a repair person. He created a new account and retrieved everything I had on my desktop, but not my mailboxes or bookmarks. He said there is a way to do that, but it would be very expensive for me to have him do it. He said I could come here and find out. So here I am.
    I can get online and to the desktop of this new account, but that's all. How can I get that stuff? I need it very badly.......
    It was an iBook G4 14" with 10.4.11.
    Thanks!

    Here is what macjack has offered:
    http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh2316.html
    Hope it works!

  • HT201320 after syncing my iphone4s with itunes on my laptop i have lost all my emails & pop3 email settings, how can i get it back, its also supposed to be backed up on icloud with extra paid for storage

    I have used my force9 emails for a few years with now problem on my laptop and also for maybee 6 months on my iphone4s but after syncing with itunes on my laptop i have lost all the emails & email setting of my phone.
    I also back up on icloud and tried looking on there on my laptop but there is only my icloud emails and not my pop3 force9 emails . There are all my contacts there butwhy does it wipe my emails and settings and how can i get them back.
    many thanks
    monoboard

    Restore your backup.

  • Maybe you are looking for

    • Possible to make line corner not jagged, but not round?

      If you look at the attached image, you can the upper line is very jagged.  Is it possible to retain the object's shape but make that point, less pointy?

    • Safari not working on hotspot

      Hi, am on a public hotspot, and can't connect to internet via safari. Firefox allows me to sign in, and view pages. both mail & safari don't work over this connection. Edwin

    • Customizing PO number to add a prefix 'AB' on the number generated.

      Hi All I have a requirement to customize the PO number on the Purchase Order form, when a user create a new PO manually. Below is the code, could someone please point to the right direction on this issue. form_name VARCHAR2(30) := NAME_IN ('system.cu

    • CSM IPS Manager doesn't display IPS sensors.

      I am doing inital configuration of the CSM v3.0 The IPS sensor 4250xl that I have added to CSM doesn't show up in the IPS Manager. Moreover, the Devices->Sensor window doesn't appear to be displayed correctly - there is a browser icon indicating miss

    • How to locate JSP Page in the server

      Hi, I have the following requirement in OA Framework . There is a existing Customized OA page in the PO Module.My requirement is to add a text field in the existing page and based on a input to the text field ,i have to retrive the data in the page.