How can I get flash videos to play

When I bought this iPad I had no idea that I wouldn't be able to watch most of the videos I want to watch.  Is there any way to get flash without paying for a new web browser program?

sarah165 wrote:
Can you name some apps that I have to buy?  I don't know where to start.
"Puffin" comes to mind.  I think it's only a couple of dollars, but I can tell you that you won't be happy with the Flash video that runs through this browser.  Too much overhead or something. It stutters and freezes.
Waste of time and money IMHO. 
The "security" excuse is a bit thin.  Flash works great on my MBP and as far as I know, on all the the other Apple computers.  Jobs had decided that it will not be supported on the iPad, the iPhone, and the iTouch.
Personally I could care less.

Similar Messages

  • How can you get 2 videos to play simutenously together?

    How can you get 2 videos to play simutenously together so both are playing side by side on screen at the same time? 

    Welcome to the forum.
    As Steve observes, what you are talking about is called "PiP," or Picture in Picture.
    He has given you the basics of creating a "split-screen" PiP, and that should be exactly what you wish to do.
    For more detail, plus more ways to do PiP, I strongly recommend his book, Cool Tricks & Hot Tips for Adobe Premiere Elements 11, from Muvipix. He has an entire chapter (Chapter 10) on PiP, and many of its uses, with detailed instructions on the settings to accomplish it. Just that one chapter is worth the price of the book.
    Good luck, and happy editing,
    Hunt

  • How can I get flash video to work on ipad2 ?

    I have ipad2 on order - then realised does not support flash. All our training videos are flash !!! Do I cancel order or can I get flash to run on ipad2

    Flash is not supported on the iPad. There are some apps that take a flash video on a web page, send it to a server which converts it to a format suitable for the iPad, but these are somewhat iffy.

  • How can I get SD video to play fullscreen at 1080p resolution

    In iTunes on OSX, if I click the full screen button, iTunes will take over the monitor, but it does not scale the video to use the full resolution like Hulu or Netflix do for their fullscreen video.  Instead I get a 640x480 box in the middle of the screen with black bars on all four sides.  Is there an option that I can't find to make iTunes upconvert?

    If the Denon shows in airplay mirroring you can just turn on mirroring and get the sound.  Otherwise try System Preferences -> Sound -> Output and choose the Denon there. Any system sound will play through the airplay device.  I don't know why apple doesn't just give an airplay option from the menu bar sound icon to make this easier.... seems like they are pushing people to mirror

  • How can I get Quicktime videos to play fully screen?

    I recently downloaded Quicktime Pro to my windows computer in order to be able to play Quicktime movies in full screen, but they still only play in the small video pane. Everything seems to be properly installed using the key I received, and my programs now indicate that I do have Quicktime Pro installed. Why doesn't it play in full screen?
    Dell Inspiron E1505   Windows XP  

    Look under the Help menu and click "Installed Plug-ins".
    Do you have QuickTime associated with that file type?
    You set them using the QuickTime System Preference / Advanced tab MIME Settings button.
    Quit and relaunch your browser after making changes.

  • HT3775 how can i get my videos to play on quicktime or itunes when it says it needs the necessary codecs?

    i tried downloading my movies from my Sony HandyCam DCR-SX41 to my MAC OS X 10.7.4 and the message was that quicktime did not have the necessary codecs to open the movies...
    what do i do about this??
    thank you.

    In what format are the files? You probably need iMovie '09 or MPEG Streamclip.
    Google>CNet Reviews>Sony HandyCam.

  • In Windows how can I save a video just played by Flash Player?

    In Windows how can I save a video just played by Flash Player?

    This is what I ended up doing.  I put the FLVPlayback inside a movieclip and put this on the first frame:
    stop();
    var vidTime:Number=0;
    on the frame that the video plays on I have the video and a close button (which is a movieclip) and I put the following script:
    if(vidTime>0)
        htMeasVid.seek(vidTime);
    close_btn.addEventListener(Event.ENTER_FRAME, seekCount);
    close_btn.addEventListener(MouseEvent.MOUSE_UP, closeBtnUp);
    function seekCount(e:Event):void
         vidTime=htMeasVid.playheadTime;
    function closeBtnUp(e:MouseEvent):void
        e.currentTarget.parent.play();
    on the following frame I have this code:
    close_btn.removeEventListener(Event.ENTER_FRAME, seekCount);
    htMeasVid.stop();
    and then on the last frame I have this:
    gotoAndStop(2);
    so that it doesn't reset the vidTime variable to 0.
    Thanks again for the help.

  • When playing my i-tunes library through my hi-fi via Airport Express, how can I get i-tunes to play a single album and then stop, without continuing on through my entire library. It's a problem that doesn't occur when I'm listening through my i-pod.

    When playing my i-tunes library through my hi-fi via Airport Express, how can I get i-Tunes to play a single album and then stop, without continuing on through my entire library? It's a problem that doesn't occur when listening on my i-pod.

    Hey everyone in Apple world!
    I figured out how to fix the flashing yellow screen problem that I've been having on my MBP!  Yessssss!!!
    I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
    I followed the instructions on this page and here's what I did:
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process.  Since I did that, my MBP boots up just like normal.  No flashing yellow screen anymore!!   
    (Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
    Let me know if this works for you!
    Elaine

  • How can I get my iPod to play noise when it says my headphones are in but they arnt and I can't get it to play music with out my headphones in ?

    How can I get my sound to play my iPod says my headphones are in all the time and they arnt so it will only play sound when my headphones are in

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
    Try the following to rule out a software problem
    - Reset the iOS device. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack or other hardware problem..
    Apple Retail Store - Genius Bar
    If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • How can i see flash videos in iPad?

    i have some video players in my website for playing videos.
    iPad support for playing flash videos?
    youtube videos playing in iPad. but not playing my videos.
    how can i see flash videos in iPad?
    or
    any solution?

    you can't use Flash video players on iPad.
    youtube probably detects the device and if it doesn't support flash plays the videos in HTML5

  • How can I get an album to play in order on Itunes?  The songs keep skipping all around to other albums that I did not want to listen to at that time?

    How can I get an album to play in order on Itunes?  The songs keep skipping all around to other albums that I did not want to listen to at that time?

    It sounds like you might have the shuffle button at the bottom left of the iTunes (the button with the squiggly lines).
    If that's not the case, then maybe you just need to sort your library by album by clicking the album tab at the top.
    Is your music in a playlist, or are you trying to play it from the entire library?

  • I am trying to import standard midi file that I created in Band in a Box into Logic Pro 9.  I can not get all the track to play with internal instrument sounds... only the piano track.  how can I get the others to play... drums, bass etc????   Help

    I am trying to import standard midi file that I created in Band in a Box into Logic Pro 9.  I can not get all the track to play with internal instrument sounds... only the piano track.  how can I get the others to play... drums, bass etc????   Help

    Don't drag the midi into an open Logic project. The tracks won't set up correctly.
    'Open' the midi file with Logic as if it were a Logic project. Then all the tracks will be set up so you can start editing them and applying better saved sounds and instruments, but you'll be at a starting place where you can hear what's going on.

  • Help! How can I get my video to show on my website?

    Hi
    I created an interactive book in InDesign CS5.5 and exported the .swf file to my desktop to include all the media (a video) and the interactive page turns. I generated an HTML page and according to this page, http://kb2.adobe.com/cps/827/cpsid_82754.html, there was supposed to be a 'Resources folder' with the video asset in there. However this folder was not created.
    When I open the html page in my browser, everything works perfectly.
    However, when I went to upoad the html and .swf files to my website, http://www.avantiandg.co.uk/ the last page with the video does not show.
    My questions are:
    1. How can I access the resources folder that is supposed to be created that I am supposed to upload to my website folder?
    2. How can I get the video to load up correctly?
    Thanks

    maybe a solution:
    Videos contained in interactive files must be converted to M4V format before being imported to Indesign, AVI, H264 or MPG won't appear once the file exported to SWF.
    In HTML the ressource folder is normally next to the root file of your site (index.html) no?

  • How can i get HD video out from the lumia 900. ? ...

    How can i get HD video out from the lumia 900. ? Is there some kind of gable. ? N8 has HD cable port..so where is lumia`s port. ?

    Download Zune and start it, when started connect your Lumia 900 and you can now transfer mediafiles from the Lumia to your PC through a USB connection. For Mac use the Mac connector.
    Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

  • HT5148 i am using final cut pro x. i have imported some images and video in my timeline. when i play back my video it looks fuzzy. but, when i pause it, it looks clear. how do i get my video to play clear.

    i am using final cut pro x. i have imported some images and video in my timeline. when i play back my video it looks fuzzy. but, when i pause it, it looks clear again. how do i get my video to play clear and not fuzzy?

    Same reply.

Maybe you are looking for