How can I get IMAQ ReadFile to read a folder of images?
Hi,
So I did read a previous post on an error message of "IMAQ ReadFile access is denied." I think mine is the same one:
Error -1074395992 occurred at IMAQ ReadFile
File access denied.
Possible reason(s):
IMAQ Vision: (Hex 0xBFF604A8) File access denied.
Problem is that I still can't seem to figure out why I can't get the IMAQ ReadFile function to read the entire folder of images. I've attached my VI. My goal is to get the area of a certain part of the image (through thresholding) and export it to a text file, excel, etc in a table format. I will be taking about 1000 images/sec, so batch processing is...very needed.
For now, my VI just has it reading the image and outputing some statistics (which include the area) with the Particle Analysis Report function. I haven't figured out how to do the export into file - if anyone has insight in that, too, I'd appreciate it.
Thanks,
irealityworldi
Attachments:
IMAQ3.vi 69 KB
I have the same problem.. How could I fix it? I uploaded my code and 3 pic to use..
Yasemin Barutçu
Electrical And Electronics Engineer
Attachments:
Camera.zip 158 KB
Similar Messages
-
On my Mac Pro how can I get voiceover to start reading at a specific point in a document, and then continue on to the next paragraph and so on? Thank you. Ed
Welcome to the Apple family!!!!
How can I cause the VO cursor(box) show-up/start?
Press Control-Option and F5. The F5 key is located on the top row of keys 6th key over. This is a toggling "Keyboard Shortcut" for turning VoiceOver on and off.
How can I move the VO cursor to various sentences or paragraphs of an article and have it start reading ... and perhaps even continue reading on to the next paragraph(s) ... even to the end of the article?
How to read a website with VoiceOver
Step 1: Go to the Website
A quick keyboard shortcut is Command-L. This will jump you up to the address bar. Start typing where you want to go. i.e "www.thewebsite.com"
Step 2: Working with Webpage
VoiceOver will automatically start reading the website. You can pause the speech by hitting the 'Control Button'.
If VoiceOver does not being reading the webpage, then you might have to "Interact" with it. If VoiceOver say "HTML Content" then press Control-Option-Space-Down Arrow to interact with the webpage.
Use Control-Option-Right Arrow to move throught the website. This will speak "EVERYTHING" on the page.
Most website that I've found have their articles labeled as 'Heading'. You can jump from heading to heading, by pressing Control-Option-Shift-H.
If you'd like an itemized alphabetical listing of the site, press Control-Option-I
Press Control-Option-Space on the link or article you want to view.
Step 3. Reading from Top to Bottom
Once you found and clicked on the the article/link, use the same 'Heading' command, Control-Option-Shift-H to find the title.
After finding the title, press Control-Option-A will start reading from the title on.
Note: If there are any other items (ads, pictures, etc) it will read those too.
Tip: You might be able to activate a feature called the 'Reader'. The Reader isolates the article and elimanates the ads The keyboard command is Shift-Command-R. You can also find it in the Menu Bar (Command-Option-M) under the word 'View' then 'Show Reader'.
I am using a MACPro with OSX, probably Mavericks 10.9 (where would I look to see if that is the correct information?)
You can find this information under the 'Apple menu' in the Menu Bar. To access the Menu Bar, press Control-Option-M.
Go to Apple Menu > About This Mac. This will open up another window. Use Control-Option-Right Arrow until you hear 'Version'. If you purchased it brand new from Apple within the last six month, more than likely you have Mavericks.
Recommanded Articles.
AppleVis- Commonly used Keyboard Commands
Chapter 2: Learning VoiceOver Basics
Chapter 6: Browsing the internet
Apple Accessibility Resource Page
The 'Commands Help' Voiceover Menu. Control-Option-H-H. (hit H twice) is my best friend. It's a searchable VoiceOver Menu with most of the VoiceOver command. Example: You are looking for the 'Read Current Paragraph' keyboard command. Press Control-Option-H-H and then type Paragraph. It will then bring up all the commands with the word paragraph. I believe there are three.
As from the Trackpad Commands, I've copied and pasted below from Appendix A: Commands and Gestures
VoiceOver standard gestures
If you’re using a Multi-Touch trackpad, you can use VoiceOver gestures. VoiceOver provides a set of standard gestures for navigating and interacting with items on the screen. You can’t modify this set of gestures.
NOTE:Gestures that don’t mention a specific number of fingers are single-finger gestures.
General
Enable the Trackpad Commander and VoiceOver gestures
VO-Two-finger rotate clockwise
Disable the Trackpad Commander and VoiceOver gestures
VO-Two-finger rotate counterclockwise
Turn the screen curtain on or off
Three-finger triple-tap
Mute or unmute VoiceOver
Three-finger double-tap
Navigation
Force the VoiceOver cursor into a horizontal or vertical line when you drag a finger across the trackpad
Hold down the Shift key and drag a finger horizontally or vertically
Move the VoiceOver cursor to the next item
Flick right
Move the VoiceOver cursor to the previous item
Flick left
Move content or the scroll bar (depending on the Trackpad Commander setting)
Three-finger flick in any direction
Go to the Dock
This gesture moves the VoiceOver cursor to the Dock wherever it’s positioned on the screen
Two-finger double-tap near the bottom of the trackpad
Go to the menu bar
Two-finger double-tap near the top of the trackpad
Open the Application Chooser
Two-finger double-tap on the left side of the trackpad
Open the Window Chooser
Two-finger double-tap on the right side of the trackpad
Jump to another area of the current application
Press Control while touching a finger on the trackpad
Interaction
Speak the item in the VoiceOver cursor or, if there isn’t an item, play a sound effect to indicate a blank area
Touch (includes tap or dragging)
Select an item
Double-tap anywhere on the trackpad
You can also split-tap (touch one finger and then tap with a second finger on the trackpad)
Start interacting with the item in the VoiceOver cursor
Two-finger flick right
Stop interacting with the item in the VoiceOver cursor
Two-finger flick left
Scroll one page up or down
Three-finger flick up or down
Escape (close a menu without making a selection)
Two-finger scrub back and forth
Increase or decrease the value of a slider, splitter, stepper, or other control
Flick up (increase) or flick down (decrease)
Text
Read the current page, starting at the top
Two-finger flick up
Read from the VoiceOver cursor to the end of the current page
Two-finger flick down
Pause or resume speaking
Two-finger tap
Describe what’s in the VoiceOver cursor
Three-finger tap
Change how VoiceOver reads text (by word, line, sentence, or paragraph)
Press the Command key while touching a finger on the trackpad
Rotor
Change the rotor settings
Two-finger rotate
Move to the previous item based on the rotor setting
Flick up
Move to the next item based on the rotor setting
Flick down
To customize other gestures by assigning VoiceOver commands to them, use the Trackpad Commander.
Assigning VoiceOver commands to gestures
If you need a reminder about what a gesture does, press VO-K to start keyboard help, and then use the gesture on the trackpad and listen to the description.
Learning about keys, keyboard shortcuts, and gestures
Sorry lots of information. Enjoy. You -
I have typos in my podcast description. Updating the RSS does not correct this. How can I get iTunes to re-read my RSS???
Thanks for your help.
Here are the RSS feeds:
http://www.solidrockvista.com/Podcasts/Lite/rss.xml
http://www.solidrockvista.com/Podcasts/Phat/rss.xml
And here are the iTunes pages:
http://itunes.apple.com/us/podcast/james-world-lite/id162059136
http://itunes.apple.com/us/podcast/james-world-phat/id162296074
Both Podcast Descriptions have typos. -
How can I get "IMAQ Line Fit" stable (with the same points)
How can I get "IMAQ Line Fit" stable (with the same points)
I my vision applications I use a lot off times "IMAQ Line Fit"
some times the results are not Stable.
See vi and word document attached.
When I take the same points but in a other order (sort)
then suddenly all points are used.
In this case I was looking for a edge in vertical direction (Y).
I found the points but "IMAQ Line Fit" did not function well.
I tried changing all settings like pixel radius and minimum score and
also threshold and so on. But no result.
Then I sorted the points reversed and that worked. See vi.
I use labview Labview 8.6.0 and IMAQ machine vision.
Maybe this problem is solved in a newer version.
Please let me know.
Thanks
Attachments:
TEST-imaq-line-fit-86.vi 169 KB
IMAQ-Fit-Line-Problem-86.doc 230 KBThank You for your reaction Hossein,
This "one application" uses "Line fit" about 20 000 000 times a day.
about 200 will go wrong. With your setting the the "Line fit" for this occasion will work but others will go wrong.
A algorithm should be:
1e Stable, when using the same points and settings the result MUST be the same. How the points are sorted should not matter.
2e Accuracy
3e Speed
4e Testing. Is very difficult but al least close points and the same points and sorting ... should be done
NI now as made a " IMAQ Line Fit" Problem CAR (Corrective Action request) 298016.
so in the future there will be a update.
In the mean while a made a line fit which uses Bisquare option from Linear Fit.vi :
from C:\Program Files\National Instruments\LabVIEW 8.6\vi.lib\analysis\6fits.llb
This is a temporary fix because "IMAQ Fit Line VI" is not so stable.
Because outliers should be rejected only Bisquare does this reasonable.
This program does NOT USE "Minimum Score" and "Pixel Radius"
Valid fit = When there are enough points within Outlier_Distance.
Algorithm steps:
- Determine if line is more horizontal then vertical, Compare DeltaX with DeltaY
- If DeltaX <= DeltaY then SWAP X Y and later Swap back
- Sort Points at on X value
- First : Bisquare Linear Fit
- Calculate distances to the found line for all points
- Inliers: Points within Outlier_distance
- Outliers: Points outside Outlier_Distance
- Only use Inlier Points
- Check again if DeltaX < DeltaY then SWAP X Y later SWAP back again
- Second : Bisquare Linear Fit only with the Inlier Points
- Results are from the second fit
Warning : This Program is Not so accurate and Not so fast
See attachments it is in labview 8.6
If some has a improvement please let me know.
Thanks
Attachments:
svi_fit_line_Bsquare_and_draw.vi 18 KB
Fit_Line_Bisquare_Linear.vi 40 KB -
How can i get on my iMAC read access to BPF devices in /dev/bpf*
Ls.
How can i get/change on my iMAC read access to BPF devices in /dev/bpf*
I want to use Wireshark.
Thanks in advance.
Loekie....any app launched from /Applications holds only the permissions of the user launching the app, regardless of the owner (presumably because anyone, including "root" can install applications into /Applications).
It has nothing to do with where the application is installed. Any executable runs with the permissions of the user who runs it. The only exception is a binary executable with the SUID or SGID bit set, and then only if it's on the root device, and only if it's not an Aqua application. The SG/UID bits are ignored otherwise.
So, anyone who has installed Wireshark from the "native .dmg" by drag-and-dropping won't be able to use the suid trick because the OS will ignore the suid permissions.
Sorry, I don't understand this at all. Wireshark invokes dumpcap as a child process to capture packets. If dumpcap is installed anywhere on the root device as SUID root, then it will run as root regardless of who invokes it.
The suid method will only work for Macports and Fink installations...
That's not correct. There are many SUID or SGID executables in a default installation of the Mac OS, and none of them comes from MacPorts or Fink. -
How can I get my MacPro to read a Windows DVD that I previously created?
How can I get my MacBook Pro to read and download a DVD I previously created on a computer using Microsoft Windows XP? The DVD has the photos I had on my old Hewlett Packard and I want to transfer them to my Mac. I really appreciate any help you can give.
<Email Edited by Host>I've asked the hosts to remove your email address - it is not safe to post personal information in an open forum. Can't help with your question since I don't run Windows, but had one idea: Are these photos in .jpeg format? If so, could you just drag the photos themselves onto your desktop from the DVD?
-
How can I get lightroom 3 to read my raw canon 60D photos
How can I get my Lightroom 3 to read raw canon 60D photos
Canon 60D support was added in LR 3.2, so just install the latest updates.
-
how can i get my itunes to discover my ipod so that i can transfer my music from my ipod to my ipad
iPod not recognized in 'My Computer' and in iTunes for Windows
-
How can I get bookmark drop down to extend folder list to the left instead of the right?
Recently cleaned up my bookmarks. Previously when I clicked on the bookmark file bar icon (between history and tools buttons at the top of the screen) the bookmark drop down would appear with my folders and links (as expected) and when I moused over a folder it would open a drop down list on the left of the main bookmark drop down but now it is opening on the right. How can I get it back to opening on the right?
This is not about having a bookmark pane always open on the left side of the window. Rather it is about how to control how the drop down menus act. (OSX 10.9.3 and Firefox 30.0)
Thanks!So I think I understand what your suggesting but I have a folder inside a folder that has long names and it opens back to the left (after the initially opening to the right) and appears to overlay the screen space needed to display the titles.
If your right (no pun intended) then the programming that supports the drop down menu display would need to scan through all the enclosed folders looking for the potentially longest title to determine which way to open the list?
I know that this is a minor issue but it does seem that something may have changed here. It would be nice if there was away to control this part of the drop down operation. Thanks! -
Any Ideas?
Hi tpcruiser22,
Did your instructor provide PDF files? You can get the free Adobe Reader for viewing them from www.adobe.com/products/reader.html.
And if you want to "listen" to the files that your instructor provided, you can activate Read Out Loud in Reader by choosing View > Read Out Loud > Activate Read Out Loud.
Best,
Sara -
SAME AS ABOVE AUTOMATIC SAVE FOLDER SCREEEN KEEPS POPING UP INSTEAD OF HOME SCREEN HOW DO I GET RID OF IT
in this case please directly contact the extension developers through the means provided at their homepage - they can likely give you more detailed guidance and are the only ones who can fix bugs or make necessary adjustments in the addon. thank you...
-
How can i get my computer to read pdf files?
My computer has stopped reading Adobe pdf files. I keep getting a Microsoft Word File Conversion box which asks if i want to use Windows Default, MS DOS, or other encoding to read file, but nothing works. I have un-installed and re-installed Adobe Reader X on my Dell/Windows Vista PC but that hasn't helped.
How are you trying to open them? Have you tried one of them from within Reader? If you can, it sounds that you have a problem with files associations.
-
How can I get data from barcode reader to forms
Hi Experts,
Forms 6i
I would like to gather data from barcode reader.
Any idea if you got please share.
Thanks in advance.Hi,
I think its working same like keyboard. Either you type the code manually or you can read it from scanner. With the help of keyboard you can able to type anything on the cursor position, on the same way the barcode-scanner is also working. Just like a copy and paste the scanner copies the data from physical device and paste it into your corrent cursor position. There is no separate program codings needed for this job. -
How can i get safari to sync reading list from my home mac and my work pc?
im using windows 7 on my pc at work and snow leopard on my mac pro at home. can i do this?
nevermind. silly me.
-
How can I get Elements 13 to read RAW files from Nikon D750?
I've upgrade my camera from the Nikon D3200 to the Nikon D750. With the D3200, I used Elements 11 to edit both JPEG and RAW files, but found out today Elements 11 isn't compatible with the D750 to read RAW files. I downloaded the trial version of Elements 13--which is compatible per the Adobe help desk, but the RAW files shot with the D750 still aren't being seen; however, I do see RAW files that I took with the D3200.
Same memory card is being used and I formatted the card when I changed it from one camera to the other.
What am I doing wrong? I almost always shoot RAW, so I need to be able to the files.
I'm wondering if Elements 13 really is compatible with the D750.
I want to add I'm using a MAC.
Thank you!
ShannonI was able to figure out the issue--the D750 files must be converted to DNG files first, then I can upload them to Elements and edit them as I would a RAW file.
If anyone else is having this issue, I found the video helpful: Learning | LR/PS - The Advantages of the DNG File Format | Photoshop.com.
You can find the free DNG converter here: Photoshop Help | Digital Negative (DNG)
This works for both MAC and Windows.
Maybe you are looking for
-
Editing a form created with trial version of XI
I have some forms that I have created with the trial version of Adobe XI and now I need to edit them. I keep getting an error that says the file is restricted and asks me to save a copy that is not restricted. When I save the copy, it won't let me ed
-
How clusterware restarts on automatically after server reboot in 11g R2
Hi, I would like to know how the cluster restarts on automatically after the server reboot in 11g R2 RAC . The oracle restart feature in 11g R2 help to restart the components like databases, ASM in case of abnormal failure. But how the clusterware st
-
Need help searching for a good IDE...
I've been looking for a good Java IDE that is somewhat comparable to Visual Studio 2003 regarding parameter info helpers and syntax highlighting, with an thought of visual design too. Does Sun have an IDE similar to VS? Seems like I came across one o
-
Everytime I try to export a movie it fails. I have Quicktime 7.0.4 PRO and Flip4Mac 2.0.2.10 and the QuickTime MPEG-2. I've tryed different settings and media types nothing seems to help. Thanks
-
How can i host my own website through the server?
Hello, I am very new to the server and I bought it specifacally because I thought I could host my own website and not have to go through something like godaddy. How can I do this with the Mac OSX Lion Server? Have a domain name and publish it through