How can I get Imovie to recognize clips from my Camcorder

I have a panasonic HDC-TM700 camcorder I recorded in AVCHD mode and Imovie won't recognize the clips.
Does anyone have any tips for converting the clips into a readible format?

It was Imovie11. VoltaicHD is working so far. Thanks Mate!
It seems funny that camcorder companies & Apple don't rectify these problems faster. The whole point in recording footage is to make movies, right?

Similar Messages

  • How can I get iMovie to recognize the external camera?

    iMAC running OSX 10.6.8 recognizes external HD Camera hardware, but iMovie fails to recognize the device.  I can copy files "manually" using Finder, but cannot import them directly into iMovie.  How can I get iMovie to recognize the camera?  I have already re-booted all devices and tried multiple USB ports.  In all cases the OS recognizes the camera, but iMovie does not.

    OK This camcorder is a fine camcorder. I have an earlier model of a similar camcorder from Panasonic. However, this newer model has one problem. It is not compatible with iMovie if you shoot at the highest quality mode, (which is 60P or 50P - which might be called 28MBPS mode). If you shoot 30P or 30i (even 60i) it will import to iMovie. Also, iMovie can handle 1280x720P60 and P50.
    It will definitely work on iMovie 11. It should probably work on iMovie 09. I doubt this camera will be recognized at all on iMovie 08, but it is worth a try. To see which iMovie you have, click iMovie/About and check the version. 9.04 would be iMovie 11. (9.08 is the current version, but it will not run on OSX 10.6.8). 8.06 would be iMovie 09. 7.1.4 would be iMovie 08.
    OK So how to work around this limitation?
    1) If you have Final Cut Pro X ($300) or can justify buying it, it will import 60P and 50P from this camera. However, if this seems a little pricey to you, keep reading.
    2) If you set your camera to record in 1080P30 and shoot a short clip, then iMovie should see the camera. Then I would suggest using iMovie import screen to create a CAMERA ARCHIVE of your camera. This will copy to your Mac the entire contents of the video files on your camera. You will need them later. I am assuming you have some valuable footage on the camera that you would like to have.
    3) Going forward, the simplest thing is to shoot in 1920x1080P30 and use iMovie normally. The biggest advantage of P60 or P50 is when you need really high quality slow motion effects. In other words, after you edit your movie, everything is converted to P30 or P25 anyway.
    4) If you want to retrieve the 1080P50 or 1080P60 clips that you have shot, then there are a couple of apps you can buy to convert them to a form that iMovie can edit. Two such apps are ClipWrap and Voltaic HD. There are also various free apps, but I cannot vouch for them. Do a search on google and you may find some that work.

  • How can I get iMovie to recognize my Canon Vixia HFM500 Camcorder?

    I'm using iMovie 11, and I cannot figure out how to get it to recognize my camcorder.
    These are things I've already tried:
    - camcorder is connected to AC power
    - camcorder is in connection mode
    - tried iMovie already open when camera connected
    - tried camera connected before opening imovie
    - ran software update on computer
    - restarted computer
    - turned camera on and off
    Any other ideas?  Thanks a lot!

    Do you get any other ideas from iMovie '08 or later: Cannot see or control camera?
    Message was edited by: EZ Jim
    Mac OSX 10.8.4

  • How can I get IMovie to recognize my camcorder?

    I got a Panasonic HDC-SD60 camcorder but when I hook it up to the IMac and IMovie 6.0.3 it doesn't see anything connected. What do I need to do?

    iMovie 09 was a huge improvement over iMovie 08. Don't use iMovie 08 unless you have to. iMovie 08 may support your camera, but I am not sure. Your camera was manufactured well after iMovie 08 came out, but it still might work.
    iMovie 09 and iMovie 11 (the newest) have all the features of iMovie 08 plus a lot more.
    Message was edited by: AppleMan1958

  • In the iMovie 11 event library, how can I get the iPhoto video clips to combine with my camcorder pics listed below and in chronological order?

    In the iMovie 11 event library, how can I get the iPhoto video clips to combine with my camcorder pics listed below and in chronological order?

    Try forcing iPhoto to load the Library on the External Hard drive by launching it while holding down the Option key. Choose the Library on the External HD, and quit iPhoto, see if iMovie can see the Library with the iPhoto Videos contained inside.

  • I just recently upgraded to iMovie 10.0.1.  Now whenever I import video longer than 30 minutes, it automatically splits it at 30 minutes.  How can I get my entire video clip at once without a break again?

    I just recently upgraded to iMovie 10.0.1.  Now whenever I import video clips that are longer than 30 minutes, it automatically splits them at 30 minutes.  How can I get my entire video clip without a break again?

    As long as you know your serial number you can download PSE from here:
    Download Photoshop Elements products | 11, 10
    If you don't know your serial number:
    Find your serial number quickly

  • How can I get iMovie to unfreeze? It won't play my video I made.

    How can I get iMovie to unfreeze? I made a video from different clips and I tried to add audio. After I tried to add audio iMovie won't play my video any longer. How can I fix this?

    lindaf4 wrote:
    How can I get iMovie to unfreeze?
    Force Quit it from the Apple menu.

  • I reinstall the Yosemite due to the wifi issue, when finished, the iMovie was not installed, I try to download it from app store, but it's not free. How can I get iMovie back?

    I'm using a mid 2014 13" rmbp. I reinstall the Yosemite due to the wifi issue, when finished, the iMovie was not installed, I try to download it from app store, but it's not free. How can I get iMovie back?

    It's something to do with the main user account (not iTunes account) on my Mac because I logged in with another account and it downloaded fine, I installed it on the HDD and even though the date in App Store was 16th October 2014, it is the full installer of 10.10.2.
    To try to resolve this problem, I have copied the installer app elsewhere and deleted it but App Store still will not allow me to download it with my main user account yet just allowed me to update iTunes.
    I had a brainwave last night that it might have been related to me changing the default downloads folder to one not on my boot drive (to save disk space on my main boot drive) but having changed it back, tried again, rebooted and tried yet again, deleted my App Store preferences. nothing has worked.

  • How can I get iTunes to recognize the apps that are missing from the library screen but still on the machine??

    My apps are not showing-up in the iTunes library but they are present in the apps folder. How can I get iTunes to recognize their presence?
    Library-Apps-All (only three of several hundred appear).
    Apps are still present in Users-Music-Mobile Applications
    I am running iTunes 11.0, OS X 10.8.2 on a Mac Pro. 
    Ran Disk Utility, Techtool, Disk Warrior and then reinstalled Mountain Lion, updated it and repaired permissions. No change.
    There is a file that says 'iTunes Library (damaged), which is the iTunes Database file. How can that file be re-created?
    Any technical help on replacing that file with a new, fresh one would be appreciated!

    It has always been very basic to maintain a backup of media and other important files.  If you chose to reinstall the OS without having a backup, well that just is not smart.
    If you are in the US and running iTunes 10.3 or later, iTunes purchases can be redownloaded via iCloud.  Simply log into the iTunes store, select purchases, purchase history and redownload the content.
    If you are not in the US.... well, seems you just learned and important and possibly expensive lesson.

  • Bridge wont recognizw my Nikon d610.  I am running windows 8 and photoshop cs6 with 8.6 camera raw plug in.  How can I get bridge to recognize my camera?  Thanks to anyone who can help!!

    Bridge wont recognizw my Nikon d610.  I am running windows 8 and photoshop cs6 with 8.6 camera raw plug in.  How can I get bridge to recognize my camera?  Thanks!!

    That camera model has been supported since ACR 8.3 and it is most certainly supported by ACR 8.6 and ACR 8.7 (beta).
    Either you have damaged, corrupt image files, or a faulty Photoshop and/or ACR installation.
    If there are no privacy issues, you can post one of your files to the FTP service of your choice (such as Dropbox or yousendit.com), post the link to it, and someone here can take a look at it for you.

  • How can I get RoboHelp to recognize my FrameMaker installation?

    I have Technical Suite 3.5 installed and several RoboHelp projects linked to FrameMaker books.
    The Frame books were created in FrameMaker 10. I then upgraded to Technical Suite 3.5, then later upgraded my FrameMaker to 11.
    All was well, RoboHelp continued to update from the Frame book files.
    Then last week my hard disk crashed. IT provided a new disk, installed the Technical Suite and FrameMaker 11, but now when I open the RoboHelp projects and try to update them, RoboHelp displays an error message that says "Adobe FrameMaker 10 is not installed. No FrameMaker documents can be updated."
    When I try to relink the project to FrameMaker (File | Link), I get a similar message:  "This operation cannot be completed without FrameMaker 10. Install FrameMaker 10 and try again."
    How can I get RoboHelp to recognize my FrameMaker 11 installation, which it used to do prior to the crash and reinstallation?
    Thanks.
    Jerry

    We also cannot get Robohelp to recognize our FrameMaker installation. 
    We are using Robohelp 9  and Framemaker 11.
    We are in the process of moving all of our Robohelp content to Framemaker, but our project team still needs CHM files for the next release or so.  So we figured we could move our content to Frame 11, then import the Frame content into Robohelp when we needed to generate the CHM files.
    The process works great when we use RH 10 and Frame 11, but we get the following error when we use RH 9:
    "This operation cannot be completed without FrameMaker.  Install FrameMaker and try again."
    I have uninstalled and reinstalled Frame 11 and RH 9, but am still getting the same error.  Buying a set of new Robohelp 10 licenses probably isn't an option.
    Any other suggestions?
    Thanks,
    Sue

  • How can I get iMovie 10 to see my iPhoto Library after I relocated it.

    How can I get iMovie 10 to see my iPhoto Library after I relocated it. I moved my iPhoto Library to a secondary hard drive, because my main SSD wasn't large enough. I then upgraded to IMove 10.0.4 and also moved my iMovie Library to the secondary hard drive. When I highlight the iPhoto Library in iMovie there is nothing there. Any ideas on how to get iMove to find my relocated iPhoto Library?

    I think I may have solved my own problem. I left cliked on the relocated iPhoto Library and went to "Open with >." I then went to "Other...." I then set the wind located in the bottom labled "Enable:" to "All Applications" and picked iMovie. It gave me a error, but the ultimate result was that iMove now was linked to my iPhoto Library.

  • I have a coleman Trek camcorder that creates AVI files, how can I get iMovie on my Macbook Pro to read these files?

    I have a Coleman TREK camcorder that creates AVI files, how can I get iMovie on my MacBook Pro to Read thes files?

    Try the following. there are others too
    https://itunes.apple.com/us/app/free-video-converter/id464195348?mt=12

  • How can i get itunes to recognize my iphone so i can download it and then download that into my new iphone4s???

    how can i get itunes to recognize my iphone (the first one) so i can download its info so i can then download that into my new iphone 4s.???

    Including going through all of Step 5? That can take some time, and should fix the problem. You have also removed and reinstalled iTunes following the steps in this support document? http://support.apple.com/kb/HT1923  As a last resort, see this support document. http://support.apple.com/kb/TS5376

  • I bought a used macbook air, with reinstalled the OS without iMovie. How can I get iMovie on App free of charge as a default in macbook air ?

    I bought a used macbook air, with reinstalled the OS without iMovie. How can I get iMovie on App free of charge as a default in macbook air ?

    Unfortunately, as recommended by the lady from CA, as long as the Mac is still associated with the Apple ID of the original owner, you can't even buy those iLife apps with that Mac. You will always get the alert to download them with the original owner's Apple ID.
    As suggested by the chavo from España, you need the original owner to contact Apple Care* and request that the OS and the iLife apps be disassociated from his Apple ID. Then you should be free to OS X Recovery to resinstall the most recent version of OS X that shipped with the Mac and install the iLife apps. Afterward, before using any of the iLife apps you need to open the Mac App Store (MAS) to the Purchases pane and Accept these apps into your MAS account's Apple ID. If you use any of the iLife apps before you have accepted them into your account, as per the app's Terms of Use, they all become one-trick-ponies that can not be downloaded onto another Mac or updated.
    OS X Recovery -
    http://support.apple.com/kb/HT4718
    *If you bought the Mac from a 2nd hand shop and don't have access to the original owner, you may need to provide Apple a purchase receipt to offer proof of sale.

Maybe you are looking for