How can I get Iphoto to recognize me as a user?  I had changed my ccard no. and password

I changed my credit card no. and it took the information in my oneclick order account set up but I cannot purchase the book.  It says unable to verify user or errors out.

This is how you set your sync preferences for anything that you want to sync to your iPad. This uses apps as the example but this is the way that you can select all content to sync to your device.
"Click on" in the instructions below means to put a "tick" in the boxes next to the names of the apps in the apps list.
Connect the iPad to the Mac and launch iTunes.
Click on the iPad name on the left side under devices.
Click on the Apps Tab on the right.
Click on all of the apps that you want to sync,
Click on the Sync Apps Heading.
Click on Apply in the lower right corner of iTunes
You can go into the Music tab, the Photos tab, Movies, books and so on and select all of the content that you want to sync, just like you did here. You can make all of your selections in all of the different tabs in iTunes and then Click on Apply when you are finally ready to sync the device.
You also have the option of turning off auto sync if you like so that you can make the selections or make changes every time that you sync your iPad. Launch iTunes and go to iTunes>Preferences>Devices and check the box at the bottom - Prevent iPods, iPhones and iPads from syncing automatically. Click OK and quit iTunes. Then connect the iPad, launch iTunes and go through the priced up outlined above.
If you prefer to leave auto sync turned on, you can still go back and make the changes as described above, after the iPad auto syncs.
Read the first four support articles (or more if you like) in this Google search for more information about syncing with iTunes.
https://www.google.com/search?q=syncing%20with%20iTunes

Similar Messages

  • How can I get iPhoto on my Mac to recognize my new iPhone 6?  (iTunes does recognize it!)

    I got one of the new iPhone 6s (the smaller version) and it's been working great.  I was able to restore an old backup from my 4S and transferred everything over.  iTunes recognizes the new phone and I've had no problems bringing files within apps on the phone to the computer like before.  HOWEVER, iPhoto doesn't even recognize the phone so I can't import new photos off the phone.  How can I get iPhoto to recognize it?  I tried searching for the phone as a drive via iPhoto and that didn't work either.

    So says my computer.  Honestly, I'm not tech-wavy in the least so I just take its word for things.

  • How can I get iMovie to recognize the external camera?

    iMAC running OSX 10.6.8 recognizes external HD Camera hardware, but iMovie fails to recognize the device.  I can copy files "manually" using Finder, but cannot import them directly into iMovie.  How can I get iMovie to recognize the camera?  I have already re-booted all devices and tried multiple USB ports.  In all cases the OS recognizes the camera, but iMovie does not.

    OK This camcorder is a fine camcorder. I have an earlier model of a similar camcorder from Panasonic. However, this newer model has one problem. It is not compatible with iMovie if you shoot at the highest quality mode, (which is 60P or 50P - which might be called 28MBPS mode). If you shoot 30P or 30i (even 60i) it will import to iMovie. Also, iMovie can handle 1280x720P60 and P50.
    It will definitely work on iMovie 11. It should probably work on iMovie 09. I doubt this camera will be recognized at all on iMovie 08, but it is worth a try. To see which iMovie you have, click iMovie/About and check the version. 9.04 would be iMovie 11. (9.08 is the current version, but it will not run on OSX 10.6.8). 8.06 would be iMovie 09. 7.1.4 would be iMovie 08.
    OK So how to work around this limitation?
    1) If you have Final Cut Pro X ($300) or can justify buying it, it will import 60P and 50P from this camera. However, if this seems a little pricey to you, keep reading.
    2) If you set your camera to record in 1080P30 and shoot a short clip, then iMovie should see the camera. Then I would suggest using iMovie import screen to create a CAMERA ARCHIVE of your camera. This will copy to your Mac the entire contents of the video files on your camera. You will need them later. I am assuming you have some valuable footage on the camera that you would like to have.
    3) Going forward, the simplest thing is to shoot in 1920x1080P30 and use iMovie normally. The biggest advantage of P60 or P50 is when you need really high quality slow motion effects. In other words, after you edit your movie, everything is converted to P30 or P25 anyway.
    4) If you want to retrieve the 1080P50 or 1080P60 clips that you have shot, then there are a couple of apps you can buy to convert them to a form that iMovie can edit. Two such apps are ClipWrap and Voltaic HD. There are also various free apps, but I cannot vouch for them. Do a search on google and you may find some that work.

  • How do I get iphoto to recognize scanned jpeg photos?

    How do I get IPhoto to recognize sacnned jpeg photos?  The response is that the format is nor recognized!

    What format are the photos being scanned into and where are they located after scanning? Can you open them in Preview?
    OT

  • How can I get iTunes to recognize the apps that are missing from the library screen but still on the machine??

    My apps are not showing-up in the iTunes library but they are present in the apps folder. How can I get iTunes to recognize their presence?
    Library-Apps-All (only three of several hundred appear).
    Apps are still present in Users-Music-Mobile Applications
    I am running iTunes 11.0, OS X 10.8.2 on a Mac Pro. 
    Ran Disk Utility, Techtool, Disk Warrior and then reinstalled Mountain Lion, updated it and repaired permissions. No change.
    There is a file that says 'iTunes Library (damaged), which is the iTunes Database file. How can that file be re-created?
    Any technical help on replacing that file with a new, fresh one would be appreciated!

    It has always been very basic to maintain a backup of media and other important files.  If you chose to reinstall the OS without having a backup, well that just is not smart.
    If you are in the US and running iTunes 10.3 or later, iTunes purchases can be redownloaded via iCloud.  Simply log into the iTunes store, select purchases, purchase history and redownload the content.
    If you are not in the US.... well, seems you just learned and important and possibly expensive lesson.

  • Bridge wont recognizw my Nikon d610.  I am running windows 8 and photoshop cs6 with 8.6 camera raw plug in.  How can I get bridge to recognize my camera?  Thanks to anyone who can help!!

    Bridge wont recognizw my Nikon d610.  I am running windows 8 and photoshop cs6 with 8.6 camera raw plug in.  How can I get bridge to recognize my camera?  Thanks!!

    That camera model has been supported since ACR 8.3 and it is most certainly supported by ACR 8.6 and ACR 8.7 (beta).
    Either you have damaged, corrupt image files, or a faulty Photoshop and/or ACR installation.
    If there are no privacy issues, you can post one of your files to the FTP service of your choice (such as Dropbox or yousendit.com), post the link to it, and someone here can take a look at it for you.

  • How can I get RoboHelp to recognize my FrameMaker installation?

    I have Technical Suite 3.5 installed and several RoboHelp projects linked to FrameMaker books.
    The Frame books were created in FrameMaker 10. I then upgraded to Technical Suite 3.5, then later upgraded my FrameMaker to 11.
    All was well, RoboHelp continued to update from the Frame book files.
    Then last week my hard disk crashed. IT provided a new disk, installed the Technical Suite and FrameMaker 11, but now when I open the RoboHelp projects and try to update them, RoboHelp displays an error message that says "Adobe FrameMaker 10 is not installed. No FrameMaker documents can be updated."
    When I try to relink the project to FrameMaker (File | Link), I get a similar message:  "This operation cannot be completed without FrameMaker 10. Install FrameMaker 10 and try again."
    How can I get RoboHelp to recognize my FrameMaker 11 installation, which it used to do prior to the crash and reinstallation?
    Thanks.
    Jerry

    We also cannot get Robohelp to recognize our FrameMaker installation. 
    We are using Robohelp 9  and Framemaker 11.
    We are in the process of moving all of our Robohelp content to Framemaker, but our project team still needs CHM files for the next release or so.  So we figured we could move our content to Frame 11, then import the Frame content into Robohelp when we needed to generate the CHM files.
    The process works great when we use RH 10 and Frame 11, but we get the following error when we use RH 9:
    "This operation cannot be completed without FrameMaker.  Install FrameMaker and try again."
    I have uninstalled and reinstalled Frame 11 and RH 9, but am still getting the same error.  Buying a set of new Robohelp 10 licenses probably isn't an option.
    Any other suggestions?
    Thanks,
    Sue

  • I just installed Photoshop and want to use it as the external editor.  I also have PS Elements on the computer and the only external editor I can get iPhoto to recognize is PSE.  Any help in changing the external editor to PS would be appreciated!

    I just installed Photoshop and want to use it as the external editor in iPhoto.  I also have PS Elements on the computer and the only external editor I can get iPhoto to recognize is PSE.  Any help in changing the external editor to PS would be appreciated!

    Welcome. I am using Photoshop CS5 and this works fine for me. Possibly Adobe has changed this in CS6. Hopefully, LarryHN will have further suggestions. Best.

  • How do you get iphoto to recognize that a computer really is connected to the internet?  I cannot use places to locate my photos, because the software keeps telling me my computer is not connected.  I know the computer is connected.

    How do I get iphoto to recognize that a computer really is connected to the internet?  I cannot use places to locate my photos, because the software keeps telling me my computer is not connected.  I know the computer is connected.

    Try this:  launch iPhoto with the Option key held down and create a new, test library.  Import some photos and check to see if the same problem persists. It the problem persists  make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home()/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
         User/Home()/Library/Caches/com.apple.iPhoto folder. 
    Click to view full size
    3 - launch iPhoto and try again.
    NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.
    If the new library does'nt have that problem then your original library is damaged. Post back if that's the case and we'll go from there.
    OT

  • How can i get iphoto 9?

    I am running OSX 10.5.8 and I have iphoto 7.1.5  I just spent many hours creating a calendar.  When I went to purchase it, I got an error message stating that apple doesn't support calendar purchases in iphoto 7 any longer, and I need to upgrade to iphoto 9 at the mac app store.  Since I am not running mavericks or yosemite I don't have the mac app store, so how can I get iphoto 9, and will it even work with 10.5.8?

    Buy an iLife '09 DVD (amazon or eBay) and install iPhoto form ti
    LN

  • How can i get iphoto on my IPAD if i already have it on my macbook pro

    how can i get iphoto on my IPAD if i already have it on my macbook pro?

    See this page, if your iPad qualifies for a free download: Free Apple apps for iOS 7 compatible devices
    iPhoto on the iPad and iPhoto on the Mac are completely different programs. The Mac version cannot run on the iPad, because the operating systems and the processors are different. Don't expect, that iPhoto on the iPad will be able to do the same things as your iPhoto for Mac, pr that you can keep the two iPhoto libraries in sync.  
    Se this help page for a description, what iPhoto on the iPad can do: http://help.apple.com/iphoto/ipad/2.0/

  • How can i get itunes to recognize my iphone so i can download it and then download that into my new iphone4s???

    how can i get itunes to recognize my iphone (the first one) so i can download its info so i can then download that into my new iphone 4s.???

    Including going through all of Step 5? That can take some time, and should fix the problem. You have also removed and reinstalled iTunes following the steps in this support document? http://support.apple.com/kb/HT1923  As a last resort, see this support document. http://support.apple.com/kb/TS5376

  • How can I get iMac to recognize Canon Pixma mp990 printer wirelessly?

    Although my Canon Pixma MP990 printer/scanner shows I've properly set it up for wifi, and the blue wifi light illuminates on the printer, my iMac now refuses to recognize that my printer is connected. Imac now shows the printer as offline.  When the printer was set up for corded/wired connection, the Imac worked fine with it. How can I get iMac to recognize the wireless printer setup? Thanks!

    Hi ..
    Click here >  Canon U.S.A. : Support & Drivers : PIXMA MP990
    Then click  Wireless Help
    Make sure the printer is recognized in System Preferences > Print & Scan > Print
    If not, download and install the drivers designated for the mp990 model.
    In the System Preferences > Print & Scan > Print window, click + (plus) to add the printer.

  • How can I get Skype to recognize camera on MacBook Air?

    How can I get Skype to recognize the camera on my MacBook Air?    It recognized it until last week.  (Is Apple working 24/7 to fix this irritating problem?)

    See this thread:
    https://discussions.apple.com/thread/5306216?tstart=0
    From Apple:
    MacBook Air (Mid 2013): FaceTime HD Camera might not work after OS X 10.8.5 update
    update resolution coming soon

  • I have new 2T iomega external HD (Mac Companion) - my Mac (2.8 GHz i7 - Lion OS) will not recognize HD if hooked up with Firewire, but it does recognize if hooked up via USB - how can I get it to recognize with Firewire?

    I have new 2T iomega external HD (Mac Companion) - my Mac (2.8 GHz i7 - Lion OS) will not recognize HD if hooked up with Firewire, but it does recognize if hooked up via USB - how can I get it to recognize with Firewire?

    Try a different FW800 cable and also try doing a SMC reset. If neither work try another FW800 device to see if it's recognized, if it is then  you know it's not the Mac it's probably the EHD.
    SMC RESET
    Shut down the computer.
    Unplug the computer's power cord and all peripherals.
    Wait 15 seconds.
    Attach the computers power cable.
    Wait another 5 seconds and press the power button to turn on the computer.
    PRAM RESET
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

Maybe you are looking for

  • Photo Upload to Itouch--No photo folder in Itunes

    I was only able to load photos from my computer folders by connecting the Itouch to my computer, selecting the Itouch device, and loading them from a folder directly to my Itouch. Conceivably, this is because I do not have Adobe Photoshop or Iphoto.

  • Loading csv file trying to replace double quotes

    Hi, I am trying to load a csv file with a field with double qoutes that I want to replace the double qoutes to one. The CSV file I will enter "TEST,2345" in a field and when it loads its as ""TEST,2345"" So I got this code to handle it. Pattern quote

  • Trouble with no service (iPhone6 8.0.0 and 8.0.2)

    I got my in the mail yesterday everything worked fine except I had no phone service. I upgraded to 8.0.2 still no service. I've read online and have reset EVERYTHING, restarted my phone a dozen times, and restored to factory settings using iTunes. Al

  • Link between partner and activity

    HI, I'd like to know the table where I can find together the Activity ID and Business partner information. Otherwise, I'd like to know a table contains the information present in tcode CRMD_ORDER. thanks for your help. Claudia

  • Setting up directaccess. Everything goes well, hit finish and.... "An unexpected error has occured"

    Im setting up direct access and everything seemed to be going well until i hit "finish" on the setup wizard.  Then i get "An unexpected error has occured." Checked dasetup.log and i found 1528: 2012-05-09 11:38:17.912 error Code is DaConfigErrorUnkno