How can I get it to boot??
My 12" PB has a probably about completely full HD. I need to start it up and clean it out, but it's not booting - it gets to the grey startup screen (with the apple on it) and the circle spins for half an hour and then it gives me the 'your computer must be restarted' screen with the message in several languages.
I'd use the disc utility, but I can't find my original disc!!!
Any suggestions? I've tried to start in single user mode to use the fsck tool, but it won't start that way.
Welcome To Discussions Rebecca!
"My 12" PB has a probably about completely full HD."
This situation could indeed cause a Kernel Panic.
You need to make some additional space available.
Do you have a recent backup of the system?
If not, you should try to retrieve as much critical data as possible.
If you have access to another Firewire enabled Mac, you could use Firewire Target Disk Mode, to attempt a back up.
If you are not able to startup the Mac, it will be difficult to resolve the Kernel Panic.
You also need to find or replace the system install discs.
ali b
Similar Messages
-
How can I get Firefox to boot before windows?
My hard drive will not boot or read. I'm using Windows 7 and apparently it's a virus infected nothing works except for the blue screen of death. Can't I use Firefox to boot my computer instead of windows? How do I get to boot during the start up?
Start your '''Computer''' in safe mode with networking.
'''[http://encyclopedia2.thefreedictionary.com/Linux+Safe+Mode Starting The Computer In Safe Mode;<br>Free Online Encyclopedia]'''
If the menu has a '''Repair''' option, try using it.
If you can't fix this yourself, you will need a tech. Good luck. -
I have a Macbook Air and the start up disk is full so it will not boot up. How can I boot it up so I can delete some files?
You will have to see about booting it from another drive or USB flash drive or another computer. When you are able to then see the following:
Freeing Up Space on The Hard Drive
1. See Lion's Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Also see Freeing space on your Mac OS X startup disk.
5. See Where did my Disk Space go?.
6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located. -
How can I get Windows 7 Boot Camp to find my Magic Mouse?
Hey!
So I just bought a Magic Mouse and it works flawlessly in OS X.
But when I use Windows 7 Boot Camp I can't find the mouse to add it as a new device. My bluetooth works just fine and I have the Boot Camp 3.3 drivers.
I tried rebooting, turning the mouse off and on, read a bunch of guides on the internet but no one is having issues CONNECTING the mouse, only getting it to work, so my research is proving to be hard.
Can you guys help me?
Thanks!Hi Maia,
Can you please mention your MAC model (MBA 2011, MBP, iMac?). Which OS X version?. Have you problems pairing other bluetooth devices?
You may want to try the following setps.
1.- First make sure that you have the latest EFI and software updates. Including latest bootcamp bluetooth drivers.
2.- Unpair MM in Mac OSX
3.- Do a Nvram and SMC reset:
http://support.apple.com/kb/ht1379
4.- Restart
5.- Pair your MM under Mac OSX
6.- Boot on Bootcamp assiging bootcamp as a starting partition
7.- Add your device.
Let me know if that worked, there are another tricks you can try but I need additional information. -
I get the blue screen loop when I try to start my Mac-Pro. How can I get it to boot up all the way? Can anyone advise me?
Which OS X is installed?
Troubleshooting advice can depend on that information. -
My caps lock was stuck when I shut down my computer. It is coming back up in safe boot (I had spilled liquid on it).
It's asking for my password - which has some lower case letters...So now how can I get in?
Is there a way to change this password or something?
I have a wireless keyboard, but it wasn't set up - so, It's not recognizing it.
Any ideas?Take your computer to get the keyboard replaced, your lucky it didn't trigger the moisture sensor and brick your machine, so your chances of the machine working well after the keyboard is replaced is likely very good.
As long as the main keyboard is sending a caps lock signal, it's not going to work even if you get in.
If you need to remove files off the internal drive, use a Firewire cable (800 to 400 adpater may be needed) and hold T to boot the problem Mac into Firewire Target Disk Mode and connect the cable to another Mac, the hard drive will appear on the desktop which you can then remove/erase files. -
I Have just downloaded the latest upgrade (through software update) and now my Mac Book Pro will not boot up !! how can I get out of this ?,
Try starting in safe mode:
Ciao. -
how can i get my imac proceed to home page from restarting endlessly? it will start then start booting then chime then bck to step one, not even hitting the start up page.... plssss help!
Hi
My Powerbook was the same. Only fix is to reinstall OSX from the install CD but be sure not to pick the Format and install clean. Once you boot with the install CD pick the preserve user data and settings.
On My machine the reinstall looked perfect. My network, email, files and all the programmes were all there. Most apps worked fine but Adobe CS2, Virtual PC and NetBarrier all needed reinastallation as they reported a few files or registration was missing. I went for the 10.4.3 upgrade again and it worked fine.
Good luck
D -
My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
How can I get a boot-disk for a Compaq P2500 laptop Windows XP Home Edition?
I'm already in another forum with a eerily similar question, but that's for the HP Media Center Pavilion m8000e desktop system (Windows Vista Home Premium) I was just given; I've ordered a new hard drive for that. I assume the directions to create a boot disk with the *.iso file (using Imgburn) is going to work; I have the 25-digit code for that.
This question here now is for my wife's older Compaq P2500 2596US laptop running Windows XP Home Edition. This too needs a new hard drive, but I also am missing the boot disc for this; I do have the 25-digit product code.
How can I get a boot disk for this laptop? I tried the Ubuntu method outlined in a few posts; geez, what a headache ... never could get it managed. Does HP not make any boot disks available? Microsoft told me to check with HP.
I can furnish the product code; model #; serial# ... gee, maybe the oroginal receipt is even laying around somewhere ...
I need a boot disk to get the new hard drive up on board (if I end up ordering that).
Thanks for any help!
MichaelHi
Please find the link given below might be helpful for your.
http://www.computersurgeons.com/productdetails.aspx?ID=4219
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath -
How can I get network connection when booting from usb stick or dvd
Computer: HP Pavillion P6-2450eo
Secure Boot disabled
Legacy Boot enabled
Thruogh F9 I can boot in uefi mode from DVD and USB stick but I can't get at network connection from the loadet program. I have tried with Ubuntu 13.04, Linux Mint 15 and Boot Repair - all with same result.
How can I get the programs to boot with network connection?
On beforehand thanks!
poul1304
This question was solved.
View Solution.Please verify that the programs (Ubuntu, Mint, Boot-Repair, etc.) you are attempting to use, support the Atheros AR8161L gigabit ethernet controller natively. Not all operating systems and software programs support every network device and/or configuration otut of the box. Many times, specific drivers must be loaded or injected into the OS for a device to function properly.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240 -
After having installed with Bootcamp windows 7 a couple years ago, upgrading to mavericks seems to have lost that capability despite windows being installed in its own partition. How can I get this back?
This was the scenario:
The first time I updated, it was only my music that was lost.
When I got my music back, I lost my apps.
When I got my apps back, my contacts, notes and photos were lost.
Now I got back everything except for my photos.
(Yes, I restored from backup several times since the first update.)
Do you think if I try restoring from back up, my photos that were taken from my ipod will be restored finally?
Thank you. -
How can you get OS Lion back if you already downloaded Mavericks? I CANNOT live with the battery life of 2 hours!! HELP
Kappy wrote:
Don't downgrade OS X without first erasing the drive. You cannot restore a Time Machine backup of Lion directly on top of a later version of OS X such as Mountain Lion or Mavericks.
When you "Restore from a Time Machine Backup.", the drive will be erased for you, but yes, won't hurt to:
Boot into Recovery (hold ⌘R on boot)
Utility->Disk Utility->Erase Macintosh HD, then Repair Macintosh HD
Quit Disk Utility
Then Select: Restore from a Time Machine Backup. -
How can you get your ipod touch serial number from apple beacause my ipod was stolen
how can i get my ipod serial number from apple
http://support.apple.com/kb/HT2526?viewlocale=en_US
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
I'm using a mid 2014 13" rmbp. I reinstall the Yosemite due to the wifi issue, when finished, the iMovie was not installed, I try to download it from app store, but it's not free. How can I get iMovie back?
It's something to do with the main user account (not iTunes account) on my Mac because I logged in with another account and it downloaded fine, I installed it on the HDD and even though the date in App Store was 16th October 2014, it is the full installer of 10.10.2.
To try to resolve this problem, I have copied the installer app elsewhere and deleted it but App Store still will not allow me to download it with my main user account yet just allowed me to update iTunes.
I had a brainwave last night that it might have been related to me changing the default downloads folder to one not on my boot drive (to save disk space on my main boot drive) but having changed it back, tried again, rebooted and tried yet again, deleted my App Store preferences. nothing has worked.
Maybe you are looking for
-
How to print the same lay out in multiple pages
hi friends, i have designed a layout. if i give my layout for print out i need 10 print out of same layout. how to do this. can any one help. thanks, sripathi ranjith.
-
Converting from String to float and vice versa
I'm interested in people's thoughts on where common logic to convert between various field types should be stored in an application to minimise code duplication and maintenance. I have an application which consists of an object and a jPanel which dis
-
User settings and mobileme account removed upon user logout/login
On several occasions my touchpad settings and format settings (system preferences/international) had suddenly changed.(i.e. "tap to click", "drag" and "drag lock" all changed and so does the format from UK to USA). On these occasions I am also thrown
-
Most sites require passive mode. I does iweb handle this requirement? jmf
-
Ittle Plus Sign On Instrument Channel
When I load a software instr with multi outs there is a plus button that appears below the Solo button. What is it? Thanks