How can I get iTunes 10.5.2 on my MacBook Pro to recognize my iPod Classic (especially because the Finder and desktop DO show it when I plug it in)?
When I plug my iPod Classic into my MacBook Pro, the iPod appears on the desktop and automatically launches iTunes. The iPod also appears in the Finder. But no mtter how long the beach ball spins in iTunes, it never recognizes my iPod. I am using iTunes 10.5.2. I don't think it's the connecting cable or the iPod, since it works on other computers. From what I have read on the support forums, it seems like the problem might have been upgrading iTunes. But I am not sure how to downgrade and am fearful of losing my music. Help?
See:
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
Similar Messages
-
How can I get itunes to download on my PC. I just got an ipod classic for Christmas and can not get Itunes to download. Website goes to downloaded page but i never get a downloading popup. I even turned off my popup blocker.
Make an appointment at the genius bar.
If you went without an appointment, then it would make sense that you could be turned away. -
I am having a heck of a time syncing my macbook pro with my iMac. I have all the updates and followed the instructions on apple.com, but there is no communication with either device nor an option that I find to sync them up. When I turn on photo stream on either device, it only selects a few, maybe 1,000 out of the nearly 10,000 photos I have. I try selecting all and then choosing photo stream but with no luck. I know there's a lot of you smart people out there who know what I'm doing wrong. Please help!!!
The following is from this Apple document, iCloud: Photo Stream FAQ, and will help you understand how Photo Stream works:
My Photo Stream
When you take photos on an iOS device, or import photos from your digital camera to your computer, My Photo Stream can automatically upload your new photos to iCloud and push them to all of your other devices.
When do photos upload to My Photo Stream?
How long are My Photo Stream photos stored in iCloud?
The photos you upload to My Photo Stream are stored in iCloud for 30 days to give your devices plenty of time to connect and download them.
How many photos are stored in My Photo Stream on my devices and computers?
iCloud pushes all your photos to the My Photo Stream album on your devices and computers, and manages them efficiently, so you don’t run out of storage space.
Your iOS devices keep a rolling collection of your last 1000 photos in the My Photo Stream album. From there, you can browse your recent photos or move the ones you like to your Camera Roll or another album to keep them on your device forever.
Since your Mac and PC have more storage than your iOS devices, you can choose to have all of your My Photo Stream photos automatically downloaded. In iPhoto or Aperture preferences on your Mac, be sure to select Photo Stream > My Photo Stream > Automatic Import. All of your photo stream photos will be imported into your Events, Projects, Photos, Faces, and Places folders in iPhoto or Aperture. On your PC with Photo Stream enabled in the Control Panel, all of your photos will be imported into C:\Users\<user name>\Pictures\Photo Stream\My Photo Stream.
OT -
How can I get Netflix Movies to run on my MacBook Pro via wi fi?
When I log onto Netfix with my MacBook Pro and select a movie to watch on line, I find that I lack an application that will work only in a 32-bit environment. It won't load. Is there any other application I can use to substitute for that?
Do you have Silverlight installed?
What browser are you using? I know that FireFox 4 beta 7/8 had a problem. Make sure if you are, update to the non-beta version.
This was posted on Mozilla Firefox support;
Netflix requires the Silverlight plugin, which isn't working in Firefox 4.0 Beta 7 or higher on Mac OS 10.6, because of this bug:
https://bugzilla.mozilla.org/show_bug.cgi?id=598406
Bug 598406 - Silverlight not supported by i386/x86_64 universal binary on Mac OS X 10.6
As a temporary workaround until this bug is fixed, try running Firefox 4 Beta in 32-bit mode, using these instructions:
From the menu bar, select Firefox and then select Quit Firefox
Open the Applications folder in Finder and locate the Firefox application icon.
Hold down the control key while you click the Firefox icon and select Get Info from the list of menu items.
In the "Firefox Info" window, click the box in front of "Open in 32-bit mode" so that it is checked.
Close the "Firefox Info" window and then restart Firefox 4. -
How can I get my data out of my broken Macbook Pro?
My macbook pro was working weird for no reason at Friday, and it also cannot turn on at Saturday suddenly, I didn't have time to backup my laptop before it stop working. Is this a response of Apple to help me take my data out of my broken laptop? Even I am still covered by applecare, they told me I need pay for extra 99 dollars for backup my data to my external hard drive.
What happens when you try to boot up?
Troubleshooting: My computer won't turn on
Can you boot into Target Disk Mode?
How to use and troubleshoot FireWire target disk mode - Apple Support
Yo may have to take the HD out, insert it into an external enclosure and then connect to another computer. -
Guys! I'm new to OS X and not used to it so I tried installing Windows 7 having the thought that it's as easy as on ordinary laptops. Installation was succesfull, Installed it by first going to a "boot utility like" screen while it's still on OS X, Deleted all those partitions, Placed a Windows 7 disc in the disc drive and on the Windows installation menu I also deleted the partiotions I saw. After all that my MacBook successfuly is running Windows 7 but problems appeared like no backlight on the keyboard, Trackpad is no longger functioning well and the audio jack has this f*cking red light. :'( I admit this is all my fault and I really need to find a solution to get it running on OS X again. Please help!!! Sorry for my bad english... And also, While booting up, There is no more Apple logo but a silver screen then Windows...
A partition is just a section of the disk set aside for a particular purpose. In this case, we're talking about a Mac partition and a Windows partition. They have different formats, which is how the data is stored. The disks that came with your Mac will create the Mac partition when you install, but most likely you'll lose the Windows partition. You've got kind of a mess at this point. What you should do is install the Mac OS and get everything as you want it. Then run Bootcamp to create a Windows partition and let Bootcamp do the Windows installation for you. Grant gave you good advice earlier. Don't let Windows do any partitioning. That's how you got into this mess.
-
How can I get my ethernet port to work on Macbook Pro.
My ethernet port does not work on my Macbook pro (2010 model) running Yosemite. Please help me.
You may try SMC and PRAM resets:
http://support.apple.com/en-us/HT201295
http://support.apple.com/en-us/HT204063
If no success, then you have a hardware problem. Make an appointment at an Apple store genius bar for a FREE evaluation.
Ciao. -
The iPhone **** cannot be used because it requires iTunes version 10.6.3 or later - I get this error message yet I have 10.6.4, how can I get itunes to recognise my phone
You must be referring to OS X 10.6.4, because there is no iTunes version 10.6.4. You can download iTunes 10.6.3 here:
http://support.apple.com/kb/DL1575
Any reason why you have not updated to OS X 10.6.8? If you did, you could then run iTunes 11.0.1. -
How do I get a mini disk out of my macbook pro?
In my infinite wisdom inserted a mini cd into my macbook pro. How can I get it out?
Put double sided tape on a business card, tilt your laptop on the side and pull out the disk with the card while pressing eject... It works, I just had to do it.
-
How can I get iTunes to display the tracks from a CD in their original (album) order?
To be absolutely honest, I don't really understand what this box is for, so I shall just use it to repeat and expand on my question. (I have already sent a "Feedback" comment on the same topic).
How can I get iTunes to display the tracks from a CD in their original (album) order?
It seems to me that there is something very basic wrong with the way iTunes handles CD Tracks.
Professionally produced CD tracks are seldom if ever in a randomised order. Why then does iTunes seem unable to display the tracks in the order they appear on the original CD source - whether from a personally owned CD or from a download from the iTunes Store?
Some music demands a specific, non-alphabetic sequence in order to make sense. Why does it seem that iTunes only offers Alphabetic, or reverse alphabetic order - both of which make a nonsense of the original, often intended order of tracks?
Why not replace the so-called "cover-art" in the bottom left hand corner if the iTunes window - which, while it may look attractive to some, gives the barest of information concerning the original disc, with a list of the original CD tracks in their original order, so that the user can easily reestablish the order in which they should be played.
As I would expect legibility might be a problem with doing this, why could not the original contents, (in their original order), at least, be displayed when the "cover art" is double clicked-on - the result of which at present gives me an enlarged version of the "Cover Art". While on the subject of the contents of the source disc, what about all the album notes which someone takes trouble to write in order to increase the appreciation of the music on the CD and the listener's general background knowledge of the artists involved. Such notes, it seems to me, have considerable intrinsic value in their own account. I would, I think, normally be prepared to buy such "Sleeve notes" - so long as a "taster" was supplied (as it is for the music) - for something like the cost of a single 'Tune" on iTunes.
These two aspects let Apple iTunes down enormously, in my opinion. I think that by chopping even quite protracted sequences of music up into bits does no one any favours - except perhaps Apple's already quite substantial bank balance. People have to be aware that two and a half, to three and a half minutes is a very short time to develop a piece of worthwhile music, and that there are many, many composers, not all of whom are alive today who have written music that huge masses of mankind value for the enrichment of their lives and the human condition in general.
Please make the viewing of iTunes tracks in their correct order by default possible. By all means have the alphabetical variations available as offering a different approach to the music, but not the sole approach to it - PLEASE.
Frustratedly yours
Alan Whitaker
PS I work at my old 24" iMac Intel Core 2 machine which runs OS "Tiger" - because it is more beautiful to look at, the screen is more pleasant to work on, and because, in some ways it is more capable (it will run FreeHand MX without needing a "patch"), than my more recent 21.5" which runs "Snow Leopard". (I don't find it that much slower, either).Dear Mike
Thanks for the support. I am utterly amazed that after all the hype about how good iTunes is that it cannot play a downloaded CD in the correct order, and that what that order should be is not available directly from within one's own iTunes installation. (I know that one can go back to the iTunes Store to check what the order should be, but having downloaded the tracks surely iTunes is clever enough to retrieve this important information.
My iTunes to differ from yours in that I have also noticed that it seems unable to download copies of my "talking books" in the correct order either. But in my case it downloads them - from a CD - in order, but with the first track downloaded first - so that it appears at the bottom of the column of tracks so that it would get played last! (At least this is, while being inexplicable, a relatively "logical" bit of blundering and because of this is relatively easy to put right!).
I like many genres of music, some of which are not really programmed except perhaps by the artist performing them. I know that Frank Sinatra was very careful to programme his album songs to obtain a particular effect and in relation to the keys of the music. iTunes presumes to know better.
Film scores may be totally randomly put together, in some cases, but in others the order is vital to one's appreciation of the music as a whole and how it relates to the plot of the film.
In symphonic music most works are divided into sections and are conceived by the composer that way. Some individual sections may gain a life of their own if played separately, but they are never complete in the sense that the composer envisaged them without being placed in their proper context.
Opera and probably most choral music too, is similar except that the words may well become meaningless if the order is changed at the whim of a piece of ill-written computer code, while ballet music has to be heard totally within its sequential context or it becomes meaningless.
Finally, I would venture that iTunes, by jumbling up the order of the tracks as recorded on a CD, does an immense disservice, not only to the music on a particular CD, but to music in general, by expressing everything in terms of "Songs" - which it seems to interpret as stand-alone items of between 2 and 4 minutes whatever the genre. Even the way the iTunes publicity speaks of how many "songs" it can store instead of how many minutes or hours of recorded sound. This has to be another brick in the wall of "dumming-down" of people's expectations, and the shortening of their attention spans.
I don't know about anyone else, but I feel betrayed by Apple over this. Perhaps the look, feel and general presentation of an item are not the most desirable features of a consumer product. Maybe it should be judged more on it fitness for the purpose for which it was sold. There is one other possibility - that Apple are trying to redefine "Music" - and that everything that lasts longer than about 3.5 minutes or is in the form of what could for want of a better term be called symphonic in the broadest sense is something else - not "Music" within Apple's new definition, at all!
Well that's off my chest! now I can get down to creating some sort of order in my iTunes Libraries, knowing that I have to reconsult all the sources in order to confirm the source playing order.
Anyway thanks again. At least I know that it is not just me
alanfromthatcham -
How can I sync my iPad 2 with my new MacBook Pro when it is already synced with my old MacBook? I am getting a message on the new MacBook Pro that says I am not allowed to sync the iPad 2 because it is synced to another iTunes library.
1) ensure iTunes is authorized for your iTunes store account(s)
2) connect your device and right-click or control-click it in the iTunes Source list, then choose transfer purchases from the shortcut menu that appears.
3) sync the device
iTunes will wipe the iPad but, since you transferred your purchases in the previous step, your content will be in your library and you can re-populate the iPad with it.
above works for purchases from the iTunes store. for everything else, check out this post by Zevoneer.
also, there are PhoneView and iRip. -
have a subscription to The Telegraph which I purchased before changing my email and apple ID. How can I get iTunes to change it to current ID
Did you create a NEW Apple ID or did you change the email address for your OLD Apple ID? This will affect how you update apps in the future.
Anyway, go to Settings/iTunes&App Stores, log out, then log in with the new ID. -
Is there a way to reset the default CD burner? I have an internal pioneer burner the DVR105, and an external firewire La Cie burner. The La Cie burner is much newer and will burn properly. However, itunes 7 is trying to burn to the internal DVR105 only, and it keeps giving me errors.
How can I get Itunes to burn to the healthy la Cie? I know my Toast software recognizes it...I have burned DVDs to the La Cie many times before in Toast. Itunes offers me no option to select which burner to use, unlike Toast. My OS is Panther.
thx
c-postSorry, Itunes is not giving me that dialog. Lemme tell you, it did give me a related dialog earlier today when my La Cie was not connected. Apparently it defaulted back to the Pioneer at that time. I have since reconnected the La Cie, and the system is seeing it, however Itunes won't offer me the option to burn to the La Cie. It just burns to the Pioneer, then gives me an error saying it can't burn the CD.
c-post -
How can I get iTunes to update play counts and file additions between users on the same computer?
I have placed my iTunes library in /Users/Shared/iTunes along with iTunes Music Library.XML
When I open iTunes, all the music is displayed correctly with playcounts etc...
The problem is, when a playcount or album info is updated it does not carry over to the other user on the same computer. The same with adding new files to the iTunes library...
How can I get iTunes to auto-update between users?
ThanksTempeleton Peck
I understand how to do that, I was looking to share all fodlers or a bunch of folders. I found out how to do it.
Paul -
How can I get itunes on my i pad to play single songs in a playlist without stopping it manually?
How can I get itunes on my i pad to play single songs in a playlist without stopping it manually?
To turn on the check marks on, say, 150 consecutive songs in a list, do the following:
Click on the first song in the list.
Scroll to the last (150th) song in the list.
Hold the shift key down while clicking the last song in the list.
All 150 songs will then be highlighted. Click the check box in one of the 150 songs and all songs will exhibit the same behavior.
Maybe you are looking for
-
Sound with video in iTunes but not on Apple TV
I use EyeTV from Elgato to record TV programs, strip out commercials, and convert for use on Apple TV. This has worked beautifully except for the last time. I can watch the TV show with sound using iTunes on my Mac. However, there is no sound viewing
-
I am being told my safari is out of date can you help
I keep getting messages that my safari is out of date Tried software update (under file) and it says my software is up to date. If I do update safari from site which one do I want Thanks Spencer
-
I am using NI-XNET CAN in a VeriStand model running on "NI Real-Time Phar Lap ETS 13.1" (inherited project). It is currently working using CAN1 configured as 'Frame Out Stream' but fails when I try to use CAN2 instead. The error code (as far as I c
-
Adobe Reader 8.1.1 - How to Uninstall ?
I recently downloaded Adobe 8.1.1 and have not been able to open pdf files on other browsers. I have tried to change(repair)the download, then tried removing the download hoping that re-installing would help. However,when I hit Start, go to Settings,
-
Marquee settings? (content aware)
Got a question about the marque tool I imagine it's a no brainer however I can't seem to figure it out. Let's say I'm working on a blank blue sky removing dust spots, if I select the dust spot with the marque tool (I've tried different feathering set