How can I get ITunes to open when I plug in my Iphone and show my Iphone

ITunes does not open when I plug in my IPhone and my IPhone does not show up

Open iTunes. Click edit. Open preferences. Click devices. Uncheck "prevent ipods, iphones, & ipads from automatically syncing". Close. Close iTunes. Plug in your phone

Similar Messages

  • How can I get iTunes to open to Library instead of the iTunes Store.  It does it on one of my computers.

    How can I get iTunes to open to Library instead of the iTunes Store.  It does it on one of my computers, but I don't know how I did it.

    For me, iTunes always opens to whatever I had selected previously when it was closed.
    In other words, if I had Apps selected when I closed iTunes, the next time I opened iTunes it would be on Apps.

  • I can't get iTunes to open when I click on it!

    I looked at what some other people said in response to this problem when other people posted it, but the whole enter "......" into the command prompt and restart thing didn't work for me. Any suggestions?

    I have windows 7 and can't get my itunes store to open.
    Could you walk us through what happens when you try to connect to the Store, please?

  • How can I keep iTunes from opening when I insert a CD?

    I have gone through the preferences again and again, and I can't find a way to keep iTunes from opening whenever I insert a CD. iTunes is not my preferred player/encoder, and I don't want it to open unless I tell it to.
    Case in point, I'm converting many CDs to mp3, using an application that gives me the filename format I want (iTunes isn't that flexible enough to do that). It is annoying for iTunes to keep butting in, every time I insert a CD!
    Thanks for any advice.
    L.

    When you first insert a CD your Mac comes up with a box saying
    "You have inserted a CD" (duuh, Apple...)
    Then you choose from a pop-up menu that offers "Open in Finder", "Open in iTunes", etc
    At some point you (or someone) has chosen "Open in iTunes" then checked the little box that says "Make this the default from now on".
    If you go into System Prefs (as already mentioned) you have a choice to reset what you want to do with a blank CD.

  • How can i prevent iphoto from opening when i plug in my iphone to the computer?

    Hi There,
    I have  a question, when I connect my iPhone to the computer the iPhoto automatically opens.
    how can i prevent this from happening? it always slows down my computer.
    any help will be appreciated.
    thanks

    Image Capture (in your Applications Folder) - In the preferences you can decide to 'Do Nothing' when a camera is connected.
    Some versions also have this option in the iPhoto Preferences.
    Regards
    TD

  • How can I get iTunes to convert my songs to MP3's again and not this AAC version. I need them in MP3's for my spicing software.

    I use a spicing program that does not support iTunes.  I need to be able to convert my songs to MP3's.  I was able to do that from my old laptop but now that I have a new one and everything is converted to the new one I noticed that the MP3 is not on there it is now AAC.  Does anyone know how to convert to MP3's now?  I am in the same version of iTunes but it is not the same.  ODD and FUSTRATING!!

    Change the default encoder to MP3. iTunes will then give you the option to convert any unprotected file in your library to MP3; this won't work with very old iTunes Store purchases.
    (62722)

  • How can I prevent iTunes from opening when Firefox is open, when the computer is not used for a few minutes?

    iTunes opens on my screen if Firefox is on, with page minimised or with current page open, if I do not use the machine for a few minutes. I can't find anything to turn this off.

    When you first insert a CD your Mac comes up with a box saying
    "You have inserted a CD" (duuh, Apple...)
    Then you choose from a pop-up menu that offers "Open in Finder", "Open in iTunes", etc
    At some point you (or someone) has chosen "Open in iTunes" then checked the little box that says "Make this the default from now on".
    If you go into System Prefs (as already mentioned) you have a choice to reset what you want to do with a blank CD.

  • My iPad is disabled, but I know the passcode.. When i connect it to iTunes it says it can't access it because it has a passcode. How can i get rid of the passcode without resetting the iPad? And if there is no way to do so, how do I completely reset it?

    My iPad is disabled, but I know the passcode.. When i connect it to iTunes it says it can't access it because it has a passcode. How can i get rid of the passcode without resetting the iPad? And if there is no way to do so, how do I completely reset it?

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.htmlhttp://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tbhttp://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Devicehttp://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htmhttp://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • I am trying to use powerpoint but when I open a document I want to work on it does not open on my desktop. It appears as open on mission control but it disappears offscreen. How can I get it to open where i need it and can work on it?

    I am trying to use powerpoint but when I open a document I want to work on it does not open on my desktop. It appears as open on mission control but it disappears offscreen. How can I get it to open where i need it and can work on it?

    It's almost certainly too late.
    The time to create a backup is before a catastrophe.  After a catastrophe, it's too late.

  • How can I get itunes to play one album from start to finish, especially when there are different artists on it?

    How can I get itunes just to play albums from beginning to end? Often if an artist has a guest artist, or there are 'various artists' on the album, it stores them all separately, so listening from beginning to end becomes not one click away, but a multitude of clicks away just to make a play list which returns the album to its original state. Why can't Apple do this as a default?

    If your music is sorted by "Albums", even a compilation is a single click.
    'various artists' on the album, it stores them all separately,
    That happens when you sort your music by "Artist".

  • How do I get itunes to open automatically when my iphone is plugged in?

    When I plug my iphone into my laptop, how do I get itunes to open automatically? 

    In iTunes click on your phone under "Devices" on the left of the screen > "Summary" tab > Options: "Open iTunes when this iPhone is connected".

  • How can i get itunes to quit skipping to the currently playing song when i'm working on the library somewhere else?

    how can i get itunes to quit skipping to the currently playing song when i'm working on the library somewhere else?

    You might be able to achieve what you want by using Party Shuffle. Set the source for Party Shuffle to be the playlist you want to listen to or add the tracks you want to listen to by control clicking on them and selecting Add to Party Shuffle. Once everything is in Party Shuffle, you can rearrange them to your satisfaction. As the songs are played, they'll roll off the queue. You can quit iTunes and even when you restart, all your songs will be there, in the order you want, waiting for you to hit play.

  • Help! I can preview the presentation in Finder however, when I click on "Open with Keynote" it says, "presentation can't be open". How can i get it to open?

    Help! I can preview the presentation in Finder however, when I click on "Open with Keynote" it says, "presentation can't be open". How can i get it to open?

    Select one and hit the Space bar to view it in QuickLook. Use the forward arrow keys to move from file to file.   If the file can't be viewed in the QuickLook mode then the file is damaged and probably can't be copied or moved.
    You could try a photo file recovery application like  MediaRECOVER which can scan the memory card and tell you what files, if any, can be recovered before you have to purchase it.
    OT

  • When I plug in my new iPad, iPhoto launches instead of iTunes.  How can I get iTunes to launch rather that iPhoto?

    I have recently purchased an iPad.  When I plug it in, iPhoto launches rather than iTunes.  I would like iTunes to open when I plug in.  Thoughts?

    Coyote-
    With the iPad connected, open iTunes.  Click on the iPad under DEVICES on the left side.  Under the Options window, check "Open iTunes when this iPad is connected".
    In iPhoto Preferences-General, Connecting camera opens: may be what controls whether or not iPhoto launches.  I have mine set to "No application".
    Fred

  • How can I get iTunes to update play counts and file additions between users on the same computer?

    I have placed my iTunes library in /Users/Shared/iTunes along with iTunes Music Library.XML  
    When I open iTunes, all the music is displayed correctly with playcounts etc...
    The problem is, when a playcount or album info is updated it does not carry over to the other user on the same computer. The same with adding new files to the iTunes library...
    How can I get iTunes to auto-update between users?
    Thanks

    Tempeleton Peck
    I understand how to do that, I was looking to share all fodlers or a bunch of folders.  I found out how to do it.
    Paul

Maybe you are looking for

  • Ipod claims to have synced but didnt transfer songs to ipod

    i will connect to itunes and it will go through all four syncing steps but once i eject it the songs that show up on itunes do not show up on my actual ipod . and the purchased playlist shows up on my ipod but not on itunes . so theres something wron

  • Can no longer burn data to CD disks

    Message appears "The drive reported an error Sense Key = Hardware error sense code = 0x44, 0xD6 INTERNAL TARGET FAILURE SINCE I INSTALLED MAVERICKS, CAN NO LONGER BURN DISKS. I had Toast 10.4 and was persuaded to upgrade to 10.09. When I downloaded a

  • Snow Blizzard looks like "Eyes" on monitor.

    Hi, I'm hoping someone can help. I'm new to Motion and am working on a project with the Snow Blizzard, Particle Emitter. On the computer monitor the effect works fine and appears as I have hoped. However, when I export the clip to a quicktime movie a

  • Selection-screen validation

    Hi Experts,       Please can any one give me the details ..   1)What is the actual use of selection screen  validation? 2) When we use Selection-screen validation? 3)If we are not written the selection-screen validation is there any effect? I know ho

  • 4.6 sync configurat​ion error code 0x3b21

    Hi.  I've finally got desktop manager 4.6 running and my blackberry 8330 backed up.  When I try to configure syncronization for Outlook 2000, the error "Warning encountered--warning code 0x3b21 check documentation" comes up.  I'm having trouble track