How can I get javax.media.*;

I want to do image processing with Java (I am a student)
But I have not money to buy java media kit .
how can I do ?

I want to do image processing with Java (I am a
student) But I have not money to buy java
media kit . how can I do ?Luckily for you, a total of three mouse clicks from http://java.sun.com leads you straight to a link that allows you to download not only JMF for Linux, Solaris, and Windows, but also the community licensed source code for it.
http://java.sun.com/products/java-media/jmf/index.html
If you could find the forum, how could you not find the library? Incidently, you might want to take a look at this page too:
http://java.sun.com/products/

Similar Messages

How can I get video media .MOD into Premiere El. 9?

Videos from my Canon 7d camera and from my Canon ADCHD camcorder (both SD cards) are .MOD files. I open Premiere Elements 9 and click GET MEDIA and it won't recognize the files. It says it cannot open the videos because:
"your system does not have the required compression/decompression codec installed."
When I bought this software a service rep assured me that it would take .MOD files. Why weren't these codecs installed with the program? How can I get these videos to work with Premiere Elements 9?

First, I apologize - I meant .MOV files, not .MOD files. I did download the Quick Time update. Then other problems arose:
Per an e-mail from a forum member, I downloaded an update of QuickTime, which should let me open .MOV files.
Inserted an SD memory card from my Canon camcorder. I selected FLASH, ADCHD... Then GET MEDIA.
Thumbnails appeared labeled MOV001.MOD and ascending numerical order. Then Premiere stopped working and a message appeared:
There is no disk in the drive. Please insert a disk into drive\device\Harddisk1\DR1
So I must have picked the wrong device category?
I couldn't close the error message or the software so used the Task Manager to get out of it.
After a couple more tries I gave up.
Then I tried my DSLR Canon 7d CF memory card. Selected NEW FILE. Clicked on "edit settings" and chose DSLR > GET MEDIA. The downloader began. Up came another message.
Download failed because the files are TOO LARGE.
These are CR2 (RAW) PHOTOS. Do I have to change the format to .jpg or .psd in Photoshop Elements first?
Any suggestions?

How can i get windows media player

I need to get windows media player? Any apps or sites I can use.

Hello, you could use mac media player insted windows media player
http://www.macblurayplayer.com/mac-media-player.ht
or
try "VLC for mac" this will play all type of videos

How can I get Adobe Media Gallery for Bridge CS3

I want to create an online photo gallery for 3rd party client proofing. I am using a reference book byScott Kelby (the editor of 'Photshop User' magazine) and he refers to Adobe Media Gallery: ( Bridge CS3 / Windows / Workspace / Adobe Media Gallery).
He states that although AMG wasn't initially shipped with CS3, Adobe released a free update for bridge and once installed it is possible to download AMG from labs.adobe.com.
I am unable to find any reference to AMG or any download/upgrades
(Windows XP/ Bridge 2.1.1.9/ Ps CS3 Extended 10.0.1)

Good day Geoff,
You can download the Adobe Reader 10.0.0 installer .EXE file from here:
ftp://ftp.adobe.com/pub/adobe/reader/win/10.x/10.0.0/en_US/AdbeRdr1000_en_US.exe
Once you've downloaded it, you can burn it to a disc or copy it to a thumbdrive to bring to the PC that's offline.
Please let us know if you have any questions.
Kind regards,
David

How can i get windows media player playlists on my ipod nano

I have all the songs I'll ever need for my ipod but do I really have to burn all my songs onto a disk and then transfer that to itunes then to my ipod? There has got to be some kind of way that can help me transfer my playlists on windows media player to itunes. Can anyone help me?

Why would you need to burn all your songs to CD? iTunes will import your MP3 files (and non-protected WMA). Playlists cannot, but can always be recreated.

How can you get Belkin Media Card Reader to work with Fifth Gen iPod?

I got a new 80Gb iPod and then discovered my Belkin Card Reader I've used extensively with my 4th Gen iPod, no longer works with the new one. I easily transferred photo albums on my PC to the new iPod but the Belkin Reader is "not recognized" by the new one.
This is a MAJOR disappointment to me as we travel a lot and I've used my iPod all over the world for photo storage. I had about 15Gb of photos on my older 40 Gb iPod before I transferred them off and got the new one.
Is there any other portable card reader that will work with the 5th Gen iPod's?
Systemax Windows XP

Look at this link http://militarycac.com/mobile.htm
 Cheers, Tom

How can I get Media Packge

I'm writing an application to play MP3, But when I import javax.media.* I has
an exception:
D\cuong2012\btJava\MP3\JPlay\JavaPlayer.java:16: package javax.media does not exist.
How can I gat javax.media. package???
I using window 2000, JDK1.5.0_01...
Thanksss

For packages not included in the basic download, click the coffee cup in the upper left corner, which will take you to java.sun.com There, click J2SE (Core/Desktop), then either Core Java or Desktop Java. The additional packages are divided between the two. (What you want is in the Desktop Java list.)

I have all my music on an external media drive that has crashed. How can I get the music of my ipod touch back onto the comupter without loosing the music when it syncs?

I have all my music on an external media drive that has crashed. How can I get the music of my ipod touch back onto the comupter without loosing the music when it syncs. in order to start rebuilding my music collection?

You should be able to recover the media with the tips in this post from forum regular Zevoneer but I'm not sure what the implications are for your application settings. You can probably transfer your purchases into a newly authorised library, backup the device, recover any other media using third party tools, then restore the device from the backup. That should switch the assocation of the device to the new library but it is not something I've personally tested.
When you get it all working, make a backup!
tt2

The itunes store app on the iphone 4s does not appear on the iphone at all so i can't purchase any media. I have done all the updates on the iphone and in itunes. This happened right after i did the latest iphone update. HOW CAN I GET THE ITUNES BACK?

after doing all the latest updates to both my iphone 4s and itunes the itunes store app on the iphone just dissapeared. Now i can't purchase any media. How can i get itunes store app back on my iphone?

If you can't find it on any of your homescreens or app folders, and you can't find it via the spotlight search screen (swipe your first home screen to the right), then is it hidden by Settings > General > Restrictions > iTunes being set 'off' ?

I have a question about the new version of itunes. in the old version at the bottom of the sceen it display the total number of media and the size of the files. how can i get the new version to diplay this?

in the old version at the bottom of the sceen it displayed the total number of media and the size of the files. how can i get the new version to diplay this?

You're welcome. It was frustrating for me as well until I stumbled across "the fix"

How can I get rid of this message that keeps popping up: Widevine Media Optimizer Update Available? Don't know what it is but don't want it.

How can I get rid of this message that keeps popping up:
Widevine Media Optimizer Update Available? Don’t know what it is but don’t want it.

Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
Here are some general guidelines. Suppose you want to remove something called “BrickYourMac.” First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickyourmac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickYourMac.dmg and open it. There may be an application in there such as “Uninstall BrickYourMac.” If not, open “BrickYourMac.pkg” and look for an Uninstall button.
You may have to log out or reboot in order to complete an uninstallation.
If you can’t remove software in any other way, you’ll have to erase your boot volume and perform a clean reinstallation of OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" that purport to remove software.

How can I get my iPod to also sync songs in my computer's Media Player?

How can I get my iPod to also sync songs I already have in my computer's Media Player? Thanks in advance for your help.
Tony
Dell Windows XP

If the WMA files are "unprotected", iTunes can convert them when you add them to your library. It should do this automatically.
See: How to add songs from your hard drive to iTunes.
If not, see: How to convert a song to a different format using iTunes.
However, iTunes cannot convert "protected" WMA files.
The only way to convert these files would be to burn them to an "audio" cd and import that into iTunes as you would any other cd.

How can I get iTunes to recognize information imported from media as audiobook vs album?

I imported a series of audio cd's that contained lecture material into iTunes. It sees these disks as albums not as a single set of audiobook portions. Therefore, everytime I listen to a portion of the lecture material, I have to remember exactly what disk and track I left off on. However when working with audiobooks, iTunes apparently knows to place a bookmark where I left off so that when I choose the book, it starts where I left off. How can I get this behavior for my lectures?

If they're MP3, use iTunes to convert them to AAC (M4A) and then use a batch renamer to change the extension to M4B. THEN they'll stay where you left off.
If they're AAC already, then just change the extension to M4B.

How can I get the "text" field from the actionEvent.getSource() ?

I have some sample code:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.util.ArrayList;
public class JFrameTester{
     public static void main( String[] args ) {
          JFrame f = new JFrame("JFrame");
          f.setSize( 500, 500 );
          ArrayList < JButton > buttonsArr = new ArrayList < JButton > ();
          buttonsArr.add( new JButton( "first" ) );
          buttonsArr.add( new JButton( "second" ) );
          buttonsArr.add( new JButton( "third" ) );
          MyListener myListener = new MyListener();
          ( (JButton) buttonsArr.get( 0 ) ).addActionListener( myListener );
          ( (JButton) buttonsArr.get( 1 ) ).addActionListener( myListener );
          ( (JButton) buttonsArr.get( 2 ) ).addActionListener( myListener );
          JPanel panel = new JPanel();
          panel.add( buttonsArr.get( 0 ) );
          panel.add( buttonsArr.get( 1 ) );
          panel.add( buttonsArr.get( 2 ) );
          f.getContentPane().add( BorderLayout.CENTER, panel );
          f.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
          f.setVisible( true );
     public static class MyListener implements ActionListener{
          public MyListener() {}
          public void actionPerformed( ActionEvent e ) {
               System.out.println( "hi!! " + e.getSource() );
               // I need to know a title of the button (which was clicked)...
}The output of the code is something like this:
hi! javax.swing.JButton[,140,5,60x25,alignmentX=0.0,alignmentY=0.5,
border=javax.swing.plaf.BorderUIResource$CompoundBorderUIResource@1ebcda2d,
flags=296,maximumSize=,minimumSize=,preferredSize=,defaultIcon=,disabledIcon=,
disabledSelectedIcon=,margin=javax.swing.plaf.InsetsUIResource[top=2,left=14,bottom=2,
right=14],paintBorder=true,paintFocus=true,pressedIcon=,rolloverEnabled=true,
rolloverIcon=,rolloverSelectedIcon=,selectedIcon=,text=first,defaultCapable=true]
I need this: "first" (from this part: "text=first" of the output above).
Does anyone know how can I get the "text" field from the e.getSource() ?

System.out.println( "hi!! " + ( (JButton) e.getSource() ).getText() );I think the problem is solved..If your need is to know the text of the button, yes.
In a real-world application, no.
In a RW application, a typical need is merely to know the "logical role" of the button (i.e., the button that validates the form, regardless of whether its text is "OK" or "Save", "Go",...). Text tends to vary much more than the structure of the UI over time.
In this case you can get the source's name (+getName()+), which will be the name that you've set to the button at UI construction time. Or you can compare the source for equality with either button ( +if evt.getSource()==okButton) {...}+ ).
All in all, I think the best solution is: don't use the same ActionListener for more than one action (+i.e.+ don't add the same ActionListener to all your buttons, which leads to a big if-then-else series in your actionPerformed() ).
Eventually, if you're listening to a single button's actions, whose text change over time (e.g. "pause"/"resume" in a VCR bar), I still think it's a bad idea to rely on the text of the button - instead, this text corresponds to a logical state (resp. playing/paused), it is more maintainable to base your logic on the state - which is more resilient to the evolutions of the UI (e.g. if you happen to use 2 toggle buttons instead of one single play/pause button).

HT1329 How can I get the songs on my iPod onto my new iTunes library?

I have an iPod that was synced to another iTunes library on another PC. The PC died and I replaced it with a MacBook Pro but it keeps saying the iPod is synced w/ another iTunes library. How can I get the songs on my iPod on the new iTunes library?

Some of the information below has subsequently appeared in a document by turingtest2: Recovering your iTunes library from your iPod or iOS device - https://discussions.apple.com/docs/DOC-3991
Your i-device was not designed for unique storage of your media. It is not a backup device and media transfer was planned with you maintaining a master copy of your media on a computer which is itself properly backed up against loss. Syncing is one way, computer to device, updating the device content to the content on the computer, not updating or restoring content on a computer. The exception is iTunes Store purchases which can be transferred to a computer.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only purchases from iTunes Store
For transferring other items from an i-device to a computer you will have to use third party commercial software. Examples (check the web for others; this is not an exhaustive listing, nor do I have any idea if they are any good):
- Expod (free) - http://www.headlightsoft.com/expod/ - Mac, universal for 104.+ (newer machines try de-Tune)
- deTune (free) - http://www.headlightsoft.com/detune/ - Mac, 10.5+
- Senuti - http://www.fadingred.com/senuti/
- Phoneview - http://www.ecamm.com/mac/phoneview/
- MusicRescue - http://www.kennettnet.co.uk/products/musicrescue/
- Sharepod (free) - http://download.cnet.com/SharePod/3000-2141_4-10794489.html?tag=mncol;2 - Windows
- Snowfox/iMedia - http://www.mac-videoconverter.com/imedia-transfer-mac.html - Mac & PC
- iexplorer (free) - http://www.macroplant.com/iexplorer/ - Mac&PC
- Yamipod (free) - http://www.yamipod.com/main/modules/downloads/ - PC, Linux, Mac [Still updated for use on newer devices? No edits to site since 2010.]
- 2010 Post by Zevoneer: iPod media recovery options - https://discussions.apple.com/message/11624224 - this is an older post and many of the links are also for old posts, so bear this in mind when reading them.
Syncing to a "New" Computer or replacing a "crashed" Hard Drive - https://discussions.apple.com/docs/DOC-3141 - dates from 2008 and some outdated information now.
Copying Content from your iPod to your Computer - The Definitive Guide - http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/ - Information about use in disk mode pertains only to older model iPods.
Get Your Music Off of Your iPod - http://howto.wired.com/wiki/Get_Your_Music_Off_of_Your_iPod - I am not sure but this may only work with some models and not newer Touch, iPhone, or iPad.
Additional information here https://discussions.apple.com/message/18324797

How can I get javax.media.*;

Similar Messages

Maybe you are looking for