How can I get Launching report directory in report trigger??

how can I get Launching report directory in report trigger??
pls help me :'<
I can run this function in forms.
"how can I get Launching report directory in report trigger??"
does reports have same function???

Click the little down arrow/+ symbol next the + - in the folders bar.

Similar Messages

How can I get the second group and report totals in Matrix report?

Hi,
I have created a matrix report with 2 break Groups.
Iam getting columns totals for the first group, but not for the second group and the report totals.
How can I get the second group and report totals for each month?
Thanks.
Ram.

Hi Ram,
If you want a total at any group-level, go to the particular group in the data model, insert a summary column in the group, and select
Reset At > appropriate Group Name
For report level summaries, you must create the summary column outside of all groups.
Navneet.

How can I get rid of directory path in front of my folder names in Folder listing in Library mode???

Im using the most recent version of Lightroom 5.3 (updated through CC - even though this has shown up on previous version) on Windows 7 and all the folders in my library are showing up with the directory path in front of my folder names. How can I get rid of this? I do not see any options in preferences to turn this off. I have also turned off preferences in Windows > Folder Options Control Panel "Display full Path in Title bar" option.
I have Lightroom on several computers and have set up preferences the same on each workstation, and this only shows up on one workstation.
Any help would be appreciated.
You can see from the image below how this is showing up.
Thanks
Thanks!

Click the little down arrow/+ symbol next the + - in the folders bar.

How can I get the Tables in my report to update their field lists?

I am working with Crystal Reports 2008, and I have a ReportDocument loaded in a .NET project.
I want to update the field lists of the tables (stored procedures) used in the report. I am calling "VerifyDatabase()", but this does not update the field lists. Through the designer, I accomplish this by going to the Database -> Set Datasource Location..., then clicking on the stored procedure (i.e. table) in the report, clicking on the stored procedure under the database in the bottom pane, and then clicking "Update".
How can I accomplish this in code?
Thanks for any help.

Hello,
You have to use RAS and the replace connection method. The Report Engine does not have the ability.
Search forums for "ReplaceConnection_Click" and you'll find sample code that should work for you.
Thank you
Don

How can I get the working directory of a project from an Annotation Processor in Java

I am writing an annotation processor in Java and in this annotation processor I want to be able to find a file in the Project hierarchy of the project on which I am using this annotation processor. Through the annotation I can pass in the path of the file I am searching for relative to the project root but i cannot retrieve the project's working directory.
Let's say that the processor is MyCustomProcessor and I am using it on the project MyProject. I want to be able to access(read) a file (a properties file) from the project structure of MyProject from the "process" method of MyCustomProcessor.
I have read this link Eclipse - Annotation processor, get project path but when I use their solution I get a null returned from the StandardJavaFileManager.getLocation(StandardLocation.SOURCE_PATH) call.
Some more details regarding the implementation:
MyAnnotationProcessor:
@SupportedAnnotationTypes(value = {"MyAnnotation" })
@SupportedSourceVersion(RELEASE_6)
public class MyCustomProcessor extends AbstractProcessor {
@Override public boolean process(final Set<? extends TypeElement> annotations, final RoundEnvironment roundEnv) {
for (final Element element : roundEnv.getElementsAnnotatedWith(MyAnnotation.class)) {

More details about the testing and development environment: Eclipse Kepler, JRE 1.7.
If you need more details just ask.

There is an identical post with an answer located at this link.

How can I get the remote directory from an FTPActivationSpec header?

The header message generated for the oracle.tip.adapter.ftp.inbound.FTPActivationSpec contains the file name, FTP host and FTP port. Is there any way of getting the remote directory as well?
<schema attributeFormDefault="qualified" elementFormDefault="qualified"
targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/ftp/"
xmlns="http://www.w3.org/2001/XMLSchema"
xmlns:FTPAPP="http://xmlns.oracle.com/pcbpel/adapter/ftp/">
<element name="InboundFTPHeaderType">
<complexType>
<sequence>
<element name="fileName" type="string"/>
<element name="ftpHost" type="string"/>
<element name="ftpPort" type="string"/>
</sequence>
</complexType>
</element>
</schema>
This is already specified in the activation spec parameters:
<activationAgents>
<activationAgent className="oracle.tip.adapter.fw.agent.jca.JCAActivationAgent" partnerLink="ReadFileService">
<property name="ftpRemoteDir" type="LogicalDirectory">out</property>
<property name="portType">Read_ptt</property>
</activationAgent>
</activationAgents>
But I don't want to have to add a separate preference parameter to hold the same thing if I don't have to. Alternatively, is there any way of querying the activation agent parameters from within an xpath expression, similar to "ora:getPreference()"?
Cheers,

add:
<element name="directory" type="string"/>
to the FTP adapter header WSDL

How can I get query filter dates in report heading?

Hello everybody.I'm pretty new at this so I hope this is the place to ask this question.I'm trying to create a report in WebI where I want a number of cases sorted by a number of categories and between different dates. The dates are supposed to be selceted at the time you are running the report (like "I want all cases between 2006-03-13 and 2006-05-30). And this is ofcourse done by using the "Finished date" object that I've created in the universe as a filter. The dates selected in the query is supposed to be included in the report heading (like "Results of cases between {date 1} and {date 2}". I have been reading the documentation about free cells, but the only thing I've found was about last refresh date and drill level. Anyone who understand what I'm talking about <img src="/modules/tinymce/tinymce/jscripts/tiny_mce/plugins/emotions/images/smiley-smile.gif" alt="Smile" title="Smile" width="18" height="18" />and know how I can accomplish this?Thanks in advance!

UserResponse(DataProvider([date 1]); "Start date?")

How can i get data from standard report 'PP_ORDER_PROGRESS'?

When I have a sales order,i want get Production Orders & Plan Order related to this SO.
The same as result of standard report 'PP_ORDER_PROGRESS'~~
How can I get the same data like report 'PP_ORDER_PROGRESS'~~
TKS very very much~~

Lorry,
I hope you are looking for an option similar to CO46 transaction.
You can use transaction COOIS, activate "Production orders" and "Planned orders" check box and in header level selection input your Sales order number to get a report you wanted.
Regards,
Prasobh

How can I get the gps coordinates on my ipad which was stolen today?

My ipad was stolen today, how can I get the gps coordinates to report to the sherriff?

If Find My iPhone (iPad) was turned on on your iPad and the iPad is on and connected to the Internet you will be able to locate it. Go to iCloud.com and sign in with your Apple ID and password. If the device is off or not connected to the Internet you can send a signal to lock or erase the iPad but that action will not complete until the iPad is connected to the Internet.
If you did not have find my iPhone turned on there is no way to track your iPad.

I am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier

i am having macbook air recently my iphotos did not open and was showing report apple and reopen but i came to know that by pressing alt and iphotos i open an new photo library and stored the pics but now how can i get the pics which i had in the earlier photo please help me to recover my photos

Well I'll guess you're using iPhoto 11:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

How can I get file list for a given directory?

Hi,
How can I get file list for a given directory? Is there a function?
Thanks.

Hi friend,
Try this sample report. It displays all files in a directory.
While executing give some directory name in input. ex: C:\
Mention file type in filter parameter. ex: *.DOC
REPORT ztests.
DATA : file_table LIKE TABLE OF sdokpath WITH HEADER LINE .
DATA : dir_table LIKE TABLE OF sdokpath WITH HEADER LINE .
PARAMETERS:p_dir(50) TYPE c.
CALL FUNCTION 'TMP_GUI_DIRECTORY_LIST_FILES'
EXPORTING
    directory = p_dir
    filter     = '*.DOC'
TABLES
    file_table = file_table
    dir_table = dir_table
EXCEPTIONS
    cntl_error = 1
    OTHERS     = 2.
LOOP AT file_table .
WRITE:/ file_table-pathname.
ENDLOOP.
Might be helpful...
Thanks.....
Edited by: Guest77 on Feb 11, 2009 5:30 AM

How can i get also the files in the root directory and how can i for testing add items of IEnumerable FTPListDetail to List string ?

What i get is only the directories and files that in other nodes. But i have also files on the root directory and i never
get them. This is a screenshot of my program after i got the content of my ftp. I'm using treeView to display my ftp content:
You can see two directories from the root but no files on the root it self. And in my ftp server host i have files in the root direcory.
This is the method i'm using to get the directory listing:
public IEnumerable<FTPListDetail> GetDirectoryListing(string rootUri)
var CurrentRemoteDirectory = rootUri;
var result = new StringBuilder();
var request = GetWebRequest(WebRequestMethods.Ftp.ListDirectoryDetails, CurrentRemoteDirectory);
using (var response = request.GetResponse())
using (var reader = new StreamReader(response.GetResponseStream()))
string line = reader.ReadLine();
while (line != null)
result.Append(line);
result.Append("\n");
line = reader.ReadLine();
if (string.IsNullOrEmpty(result.ToString()))
return new List<FTPListDetail>();
result.Remove(result.ToString().LastIndexOf("\n"), 1);
var results = result.ToString().Split('\n');
string regex =
@"^" + //# Start of line
@"(?<dir>[\-ld])" + //# File size
@"(?<permission>[\-rwx]{9})" + //# Whitespace \n
@"\s+" + //# Whitespace \n
@"(?<filecode>\d+)" +
@"\s+" + //# Whitespace \n
@"(?<owner>\w+)" +
@"\s+" + //# Whitespace \n
@"(?<group>\w+)" +
@"\s+" + //# Whitespace \n
@"(?<size>\d+)" +
@"\s+" + //# Whitespace \n
@"(?<month>\w{3})" + //# Month (3 letters) \n
@"\s+" + //# Whitespace \n
@"(?<day>\d{1,2})" + //# Day (1 or 2 digits) \n
@"\s+" + //# Whitespace \n
@"(?<timeyear>[\d:]{4,5})" + //# Time or year \n
@"\s+" + //# Whitespace \n
@"(?<filename>(.*))" + //# Filename \n
@"$"; //# End of line
var myresult = new List<FTPListDetail>();
foreach (var parsed in results)
var split = new Regex(regex)
.Match(parsed);
var dir = split.Groups["dir"].ToString();
var permission = split.Groups["permission"].ToString();
var filecode = split.Groups["filecode"].ToString();
var owner = split.Groups["owner"].ToString();
var group = split.Groups["group"].ToString();
var filename = split.Groups["filename"].ToString();
var size = split.Groups["size"].Length;
myresult.Add(new FTPListDetail()
Dir = dir,
Filecode = filecode,
Group = group,
FullPath = CurrentRemoteDirectory + "/" + filename,
Name = filename,
Owner = owner,
Permission = permission,
return myresult;
And then this method to loop over and listing :
private int total_dirs;
private int searched_until_now_dirs;
private int max_percentage;
private TreeNode directories_real_time;
private string SummaryText;
private TreeNode CreateDirectoryNode(string path, string name , int recursive_levl )
var directoryNode = new TreeNode(name);
var directoryListing = GetDirectoryListing(path);
var directories = directoryListing.Where(d => d.IsDirectory);
var files = directoryListing.Where(d => !d.IsDirectory);
total_dirs += directories.Count<FTPListDetail>();
searched_until_now_dirs++;
int percentage = 0;
foreach (var dir in directories)
directoryNode.Nodes.Add(CreateDirectoryNode(dir.FullPath, dir.Name, recursive_levl+1));
if (recursive_levl == 1)
TreeNode temp_tn = (TreeNode)directoryNode.Clone();
this.BeginInvoke(new MethodInvoker( delegate
UpdateList(temp_tn);
percentage = (searched_until_now_dirs * 100) / total_dirs;
if (percentage > max_percentage)
SummaryText = String.Format("Searched dirs {0} / Total dirs {1}", searched_until_now_dirs, total_dirs);
max_percentage = percentage;
backgroundWorker1.ReportProgress(percentage, SummaryText);
percentage = (searched_until_now_dirs * 100) / total_dirs;
if (percentage > max_percentage)
SummaryText = String.Format("Searched dirs {0} / Total dirs {1}", searched_until_now_dirs, total_dirs);
max_percentage = percentage;
backgroundWorker1.ReportProgress(percentage, SummaryText);
foreach (var file in files)
TreeNode file_tree_node = new TreeNode(file.Name);
file_tree_node.Tag = "file" ;
directoryNode.Nodes.Add(file_tree_node);
numberOfFiles.Add(file.FullPath);
return directoryNode;
Then updating the treeView:
DateTime last_update;
private void UpdateList(TreeNode tn_rt)
TimeSpan ts = DateTime.Now - last_update;
if (ts.TotalMilliseconds > 200)
last_update = DateTime.Now;
treeViewMS1.BeginUpdate();
treeViewMS1.Nodes.Clear();
treeViewMS1.Nodes.Add(tn_rt);
ExpandToLevel(treeViewMS1.Nodes, 1);
treeViewMS1.EndUpdate();
And inside a backgroundworker do work how i'm using it:
var root = Convert.ToString(e.Argument);
var dirNode = CreateDirectoryNode(root, "root", 1);
e.Result = dirNode;
And last the FTPListDetail class:
public class FTPListDetail
public bool IsDirectory
get
return !string.IsNullOrWhiteSpace(Dir) && Dir.ToLower().Equals("d");
internal string Dir { get; set; }
public string Permission { get; set; }
public string Filecode { get; set; }
public string Owner { get; set; }
public string Group { get; set; }
public string Name { get; set; }
public string FullPath { get; set; }
Now the main problem is that when i list the files and directories and display them in the treeView it dosen't get/display
the files in the root directory. Only in the sub nodes.
I will see the files inside hello and stats but i need also to see the files in the root directory.
1. How can i get and list/display the files of the root directory ?
2. For the test i tried to add to a List<string> the items in var files to see if i get the root files at all.
This is what i tried in the CreateDirectoryNode before it i added:
private List<string> testfiles = new List<string>();
Then after var files i did:
testfiles.Add(files.ToList()
But this is wrong. I just wanted to see in testfiles what items i'm getting in var files in the end of the process.
Both var files and directoryListing are IEnumerable<FTPListDetail> type.
The most important is to make the number 1 i mentioned and then to do number 2.

Risa no.
What i mean is this. This is a screenshot of my ftp server at my host(ipage.com).
Now this is a screenshot of my program and you can see that in my program i have only the directories hello stats test but i don't have the files in the root: htaccess.config swp txt 1.txt 2.png....all this files i don't have it on my treeView.
What i want it to be is that on my program on the treeView i will also display the files like in my ftp server.
I see in my program only the directories and the files in the directories but i don't see the files on the root directory/node.
I need it to be like in my ftp server i need to see in my program the htaccess 1.txt 2.png and so on.
So what i wrote in my main question is that in the var files i see this files of the root directory i just don't know to add and display them in my treeView(my treeView is treeViewMS1).
I know i checked in my program in the method CreateDirectoryNode i see in the first iteration of the recursive that var files contain this root files i just dont know how to add and display them in my treeView.
On the next iterations when it does the recursive it's adding the directories hello stats test and the files in this directories but i need it to first add the root files.

How can I get a file to copy all of the files in a directory except itself and the source of the copy function will be the directory the final program is in?

How can I get a file to copy all of the files in a directory except itself and the source of the copy function will be the directory the final program is in? This application must be in Lab View 8.

you mean something like this (see below)?
Now you may have to implement code to check if the destination folder exists and to create it, etc. But if you use the Front Panel Control to select the destination folder, it should be okay.
Not the best implementation, mind you but you'll get the idea..
Message Edited by JoeLabView on 04-18-2007 03:43 PM
Attachments:
copy folder contents.PNG ‏10 KB

How can i get dyanamic image in report template

How can i get image dynamically in report template

the report forum is the best place for such questions
Reports

How can I get the chapter numbering in automatic directory

How can I get the new pages to take over the chapter numbering in automatic directory.

Hi Peter,
thank you for the quick answer.
I'm new in the community therefor I have a additional question is there somebody reading who will take this as an feature for further updates of pages?
I think this is a"must" for professionell work.
Marcus

How can I get Launching report directory in report trigger??

Similar Messages

Maybe you are looking for