How can I get Log Express to recognize my external keyboard? - NEWBIE

I'm using a Lexicon Lambda phantom powered converter (I think that's what it's called) to run my Left and Right 1/4" cables to, from my Kurweil master out. Then the USB cable from the Lexicon out, to the Mac. How do I get Logic Express to recognize the Kurzweil so I can record the Kurzweil's on-board sounds rather than using it as a Midi controller?
Very new to Logic and all of this-any help is appreciated in layman's terms.

OK - got logic to recognize the Kurzweil keyboard on a new track, I can hear the on-board Kurzweil piano sounds, but Logic is not recording it. what gives?

Similar Messages

  • How can I get my MacBook to recognize my external hard drive again?

    Hi,
    I own a 500GB Toshiba external hard drive, and I've been using it for months now, and up until today it's worked flawlessly. I never formatted it, I just used it as a mass storage device so that I wouldn't have compatibility issues with PC's because of the formatting. For some unknown reason, today the hard drive decided it didn't want to work; I can't see it in the Finder. However, I tried it on a PC today and it's just fine there. I've never disconnected it without ejecting it first or anything else that I can think of that might damage the drive. I'm at a total loss, though admittedly I'm a novice, so maybe there's something I'm overlooking here. What can I do to fix this problem?
    Another thing: I just upgraded from 10.5.7 to 10.5.8... could that cause issues?
    Thanks! If this is a topic that's already been discussed, please link me to the thread or article.

    Does it appear in Disk Utility? (located in utilities folder of applications)
    If so is it mountable from there?
    And just to check- you are using the same connection (USB or firewire) to connect the PCs and the Mac?

  • How can I get my iMac to recognize an external web cam?

    My iMac does not see my web cam when plugged into the usb port.  Any ideas?
    Christyute

    imac doesn't.
    Finder / Preferences
    Select the General tab.
    Select:  External disks

  • After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

    After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

    Refer to this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538

  • HT201269 when i back up my iphone 5 so that i have all the info from my 4s on it, it wont put my music on it or let me do anything with it. how can i get my itunes to recognize that it is my new iphone and let me put stuff on it with out completely resett

    when i back up my iphone 5 so that i have all the info from my 4s on it, it wont put my music on it or let me do anything with it. how can i get my itunes to recognize that it is my new iphone and let me put stuff on it with out completely resetting it?

    What version of iTunes are you running on your computer? You need to update to the current version.

  • How can a get my iMAC to recognize a newly installed optical drive?

    I recently ordered a new Optical drive for my iMAC 12,1 to replace a damaged one. I followed the instructions online to replace the drive with no issues. I restarted the iMAC and it will not recognize the new optical drive. The optical drive won't accept any disks either. The optical drive is
    Model GA11N
    Manufacturer: HL
    Condition: Brand New never used, without original manufacturer packaging
    SATA interface, Slot-in loading, 12.7mm in height, without faceplate, no eject button. 1 Year Warranty
    with Apple Logo, Special for Apple iMac Intel 20" EMC 2266 A1224 21.5" 2308 27" 2390 2309 2374 Mac Mini Mid 2010
    Write Speed: DVD-RAM :5X DVD+R :8X DVD+R DL :4X DVD-R DL :4X DVD+RW :8X DVD-R :8X DVD-RW :6X CD-R :24X CD-RW :24X Read Speed: DVD-ROM/DL: 6X CD-R:24X CD-RW: 24X CD-ROM: 24X
    How can a get the iMAC to recognize this new optical drive?

    Here are some sources for Mac compatible optical drives that wiil work with your 2011 iMac.
    http://eshop.macsales.com/item/OWC/VLU2SD24XS/
    http://eshop.macsales.com/item/OWC/MR3F82SD24S/
    http://www.amazon.com/Aluminum-External-Super-Drive-Apple--MacBook/dp/B007FUDKB4 /ref=sr_1_1?s=electronics&ie=UTF8&qid=1392328000&sr=1-1&keywords=mac+compatible+ dvd+drive
    http://www.amazon.com/External-Super-Drive-Apple-MacBook/dp/B009XON646/ref=sr_1_ 3?s=electronics&ie=UTF8&qid=1392328066&sr=1-3&keywords=mac+compatible+dvd+drive
    http://www.amazon.com/LG-Electronics-Portable-External-GP40NB40/dp/B009DS6OFU/re f=sr_1_8?s=electronics&ie=UTF8&qid=1392328138&sr=1-8&keywords=mac+compatible+dvd +drive

  • How can I get the phone to recognize mini SD Card?

    I have a 32G Sandisk SD Card in the G4 mini but one day the phone said the card was blank and unsupported.  I purchased another SD Card and installed it however the phone does not recognize that I have an SD card.  When I try and save music or pics to the card the phone says I have removed the storage.  How can I get the phone to recognize the card storage?

    First of all do you Mount or Unmount the card from the settings menu before pulling the card out of its slot? Make sure that the option Mount is greyed out in you settings menu when the card is in the phone. If not select it.  If you pull the card out of the phone select Unmount first.  You can also try formatting the card from the same settings menu.  If these two things do not work, then either the card is defective or the card hardware slot is defective.

  • How can i get apple tv2 to recognize more than one computer in my house

    how can i get apple tv2 to recognize more than one computer in my house, I just got it and can only find one of two computers in my home

    Same here. I have 1 ATV2 and 2 computers and each has separate iTunes accounts (mine and my wife's). The ATV menu says "computers" so I presume you can have more than 1 computer on 1 ATV. The big question is how do you set it up?

  • How can I get Acrobat 9 to recognize my new device, epson Workforce 3540 all-in-one.

    How can I get Acrobat 9 to recognize my new device, epson Workforce 3540 all-in-one.

    Hi plichy,
    Are you able to print to your new printer from other applications, or is it just Acrobat that doesn't recognize the printer? This document outlines some printer troubleshooting tips, and is a really great place to start: Troubleshoot PDF printing | Acrobat, Reader
    Please let us know how it goes.
    Best,
    Sara

  • How can I get Lr 5 to recognize my iPhone 4s as a device to copy and import photos?

    How can I get Lr 5 to recognize my iPhone 4s as a device to copy and import photos?

    It does not work! This occurred since I upgraded to the iOS7 software on my iPhone. Apple claims it's an Adobe problem
    Sent from my iPhone

  • I can see my IPhone in my Devices list when I connect with a USB but can't see my IPod when I connect with the USB.  How can I get my computer to recognize my ipod

    I can see my IPhone in my Devices list when I connect with a USB but can't see my IPod when I connect with the USB.  How can I get my computer to recognize my ipod

    iPod not recognized in 'My Computer' and in iTunes for Windows

  • How do I get my computer to recognize my external hard drive

    How do I get my computer to recognize my external hard drive?

    Turning the power on definitely helps!

  • How can I get all Websites to recognize Safari browser?

    It's very frustrating to enter a website and it only recognizes microsoft window browser, I purchased this mac so I didn' have to deal with microsoft any longer or very little now I can't open my own companys web site. How can I get this to work? I'm not a computer wiz just love my mac!

    Unfortunately you can't always do this, since some websites rely on a particular IE bug or weirdness, or use proprietary coding such as that horrid mess known as ActiveX. Sometimes though, the developer just throws in some generic code that checks for IE, even though they don't necessarily need it. In that case, you can enable Safari's Debug Menu and change the User Agent, which will make Safari look like another browser. To enable the debug menu, open a Terminal window and type the following line:
    defaults write com.apple.safari IncludeDebugMenu 1

  • How can I get adobe reader to recognize new nook device

    How can I get my adobe reader to recognize my new nook glowlight reader so I can download library books?  I already have adobe reader installed.

    Moved to Adobe Digital Editions

  • How can I get auto correct to recognize a name used very often? It is in my address book but auto correct does t recognize it?

    How can I get auto correct on my iPhone 4 to recognize a name that is already in my address book? It doesn't recognize it and offers no suggestions.

    The cleanest way to get things straight now and as you proceed into the future with Time Machine is to start over. If the new machine is setup the way you want and has all the data placed onto it I suggest you erase and re-format the TM backup device and start a Full initial TM backup.
    I believe this will pay dividends now and over time and avoid future problems for you. Jst before going to bed crank up the Full TM backup and it will be all done by morning time.

Maybe you are looking for

  • How t print out selected values from a Jlist

    hi iam trying to get the selected values from a list to print out as a string but iam getting ,Invalid cast from java.lang.Object[] to java.lang.String.is there any way to get the selected values t print ut as a string?? import javax.swing.*; import

  • The width tool – and its ghost anchor points

    Hi everybody, i looked up everywhere now, but it seems, the problem hasnt solved yet. A Bug? No way, not with that great tool, they would update it, right?  Soo to my case: I try to use the width tool, and in most of my cases it works perfectly. But

  • Receivables - Invoices & CM's not closing after payment applied

    Hi - I have found that my A/R invoices (transactions) do not automatically close when a payment is applied in full. Is there something in setup to make this occur? Or is there a process that I need to run? My query for open transactions is bringing i

  • Redo error  in window

    Hi Experts, we use oracle 10GR2 in 32 bit window. I got an error mesage as ~Errors in file d:\oracle\product\10.2.0\admin\sale\bdump\sale_arc1_1980.trc:~ORA-16038: log 11 sequence# 15078 cannot be archived~ORA-00333: redo log read error block count~O

  • Purchasing Info Record for Consignment

    Hi When trying to create a PIR thru ME11 for consignment material, we encounter the following msg and the system doesnot save the price in PIR. OMEV setting is active. Kindly suggest "Not possible to determine a condition type for the price" Thanks a