How can i get macbook pro to recognize my samsung fascinate to transfer music?

I want to transfer the music already on my samsung fascinate phone onto my new macbook pro using the usb mass storage device option.  when i plug the phone into the usb port the computer recognizes that its there, but i am unable to do anything with it.  shouldnt i be able to open the files on the phone and transfer them to the computer?  any help would be great so i can get my music back

Contact Samsung's tech support and/or read its user manual. 

Similar Messages

  • Can't get MacBook Pro to recognize Motorola H500 Bluetooth headset

    Hello all,
    I am trying to get my MacBook Pro to recognize a Motorola H500 Bluetooth headset. Bluetooth is ON and "discoverable" on my mac. When I go to system preferences and click "bluetooth", then "devices", the headset won't show up (it is turned ON). I tried clicking "Set up new device..." and won't work either.
    Any tips on how i can make this work?
    Thanks a lot!

    You need to put the H500 into discoverable mode:
    turn it off
    hold "call button" for 5 seconds or until the sold blue circle light appears
    now go do the bluetooth set up on your Mac....your H500 will show up and then just click thru continue....

  • How can I get MacBook Pro trackpad to recognize 4 finger tap as app switcher?

    On my Bluetooth trackpad I have it configured so that a 4 finger tap is the app switcher.
    I want to configure the trackpad on my new macBook Pro to do the same, so that when I am away from my desk and using only the laptop I can have a 4 finger tap be the gateway to an app switcher.
    Do I need to download some new capabilities to enable this 4 finger tap?
    The MBP trackpad does not seem to accept any 4 finger tap commands.
    Steve

    http://magicprefs.com/faq.html

  • How do i get MacBook Pro to recognize an iRig as an input device?

    I have a Mid 2012 MacBook Pro Retina running Mavericks with the combo headphone-out/mic-in port.  I am trying to connect an iRig using this port to track guitar in Logic or GarageBand but when i plug in the iRig it is only seen by the computer as a headphone out (there is no line input or external mic detected). This same iRig works flawlessly on my iPhone so i know it is not broken.  Similarly, i plugged my iPhone earbuds-with-microphone into the port on the MacBook Pro and it recognizes both the headphones and external mic so the port seems to work ok.
    Any ideas????

    Make sure the power is off the irig and then plug it in.  
    took me a few tries, restarting the computer etc.  brand new Mavericks 13"
    Now it seems to recognize it on the computer as an input.
    Logic seems to be listening to it (when I jiggle the cable)
    but I still can't get a mic to work....
    I'll let you know...

  • How can i get logic pro x on my n ew imac i have it on my macbook pro

    how can i get logic pro x on my n ew imac i have it on macbook pro

    What do you mean, it's not installing?
    Give more details please... We cannot mind read or see your screen here

  • How can a get my iMAC to recognize a newly installed optical drive?

    I recently ordered a new Optical drive for my iMAC 12,1 to replace a damaged one. I followed the instructions online to replace the drive with no issues. I restarted the iMAC and it will not recognize the new optical drive. The optical drive won't accept any disks either. The optical drive is
    Model GA11N
    Manufacturer: HL
    Condition: Brand New never used, without original manufacturer packaging
    SATA interface, Slot-in loading, 12.7mm in height, without faceplate, no eject button. 1 Year Warranty
    with Apple Logo, Special for Apple iMac Intel 20" EMC 2266 A1224 21.5" 2308 27" 2390 2309 2374 Mac Mini Mid 2010
    Write Speed: DVD-RAM :5X DVD+R :8X DVD+R DL :4X DVD-R DL :4X DVD+RW :8X DVD-R :8X DVD-RW :6X CD-R :24X CD-RW :24X Read Speed: DVD-ROM/DL: 6X CD-R:24X CD-RW: 24X CD-ROM: 24X
    How can a get the iMAC to recognize this new optical drive?

    Here are some sources for Mac compatible optical drives that wiil work with your 2011 iMac.
    http://eshop.macsales.com/item/OWC/VLU2SD24XS/
    http://eshop.macsales.com/item/OWC/MR3F82SD24S/
    http://www.amazon.com/Aluminum-External-Super-Drive-Apple--MacBook/dp/B007FUDKB4 /ref=sr_1_1?s=electronics&ie=UTF8&qid=1392328000&sr=1-1&keywords=mac+compatible+ dvd+drive
    http://www.amazon.com/External-Super-Drive-Apple-MacBook/dp/B009XON646/ref=sr_1_ 3?s=electronics&ie=UTF8&qid=1392328066&sr=1-3&keywords=mac+compatible+dvd+drive
    http://www.amazon.com/LG-Electronics-Portable-External-GP40NB40/dp/B009DS6OFU/re f=sr_1_8?s=electronics&ie=UTF8&qid=1392328138&sr=1-8&keywords=mac+compatible+dvd +drive

  • After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

    After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

    Refer to this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538

  • How can connect my macbook pro mid 2012 to my imac 21.5 inch mid 2010 ?? I want to use imac like a display for macbook.

    How can connect my macbook pro mid 2012 to my imac 21.5 inch mid 2010 ?? I want to use imac like a display for macbook.

    Target Display Mode: Frequently Asked Questions (FAQ)
    with a mini display to mini display cable. Attach it to the Thunderbolt port on your MBP and to the mini display port on your iMac.
    How do I enable TDM?
    Make sure both computers are turned on and awake. 
    Connect a male-to-male Mini DisplayPort or ThunderBolt cable to each computer.
    Press Command-F2 on the keyboard of the iMac being used as a display to enable TDM.
    Note: In Keyboard System Preferences, if the checkbox is enabled for "Use all F1, F2, etc. keys as standard functions keys," the key combination changes to Command-Fn-F2.

  • HT201269 when i back up my iphone 5 so that i have all the info from my 4s on it, it wont put my music on it or let me do anything with it. how can i get my itunes to recognize that it is my new iphone and let me put stuff on it with out completely resett

    when i back up my iphone 5 so that i have all the info from my 4s on it, it wont put my music on it or let me do anything with it. how can i get my itunes to recognize that it is my new iphone and let me put stuff on it with out completely resetting it?

    What version of iTunes are you running on your computer? You need to update to the current version.

  • How can I get quicktime pro 7 running

    I bought quicktime pro 7 a couple of years ago and have a registration code.  At the time I used the program to make some time lapse movies.  I'd like to make a couple of time lapse movies again but quicktime pro 7 is no where to be found.  This probably ha something to do with updating the os between then and now.  The question is how can I get quicktime pro 7 running again?  The unlocking instructions I have for quicktime pro 7 that I received with the key do not correspond with what the system preferences now show.  Any assistance would be appreciated.  I am currently running OS X version 10.9.5 on an older iMac.

    Open the QuickTime 7 player(if it’s not installed, click here), choose Registration from the QuickTime Player 7 menu, and supply your key there.
    (115130)

  • How can I get the phone to recognize mini SD Card?

    I have a 32G Sandisk SD Card in the G4 mini but one day the phone said the card was blank and unsupported.  I purchased another SD Card and installed it however the phone does not recognize that I have an SD card.  When I try and save music or pics to the card the phone says I have removed the storage.  How can I get the phone to recognize the card storage?

    First of all do you Mount or Unmount the card from the settings menu before pulling the card out of its slot? Make sure that the option Mount is greyed out in you settings menu when the card is in the phone. If not select it.  If you pull the card out of the phone select Unmount first.  You can also try formatting the card from the same settings menu.  If these two things do not work, then either the card is defective or the card hardware slot is defective.

  • How can i get apple tv2 to recognize more than one computer in my house

    how can i get apple tv2 to recognize more than one computer in my house, I just got it and can only find one of two computers in my home

    Same here. I have 1 ATV2 and 2 computers and each has separate iTunes accounts (mine and my wife's). The ATV menu says "computers" so I presume you can have more than 1 computer on 1 ATV. The big question is how do you set it up?

  • How can I get Acrobat 9 to recognize my new device, epson Workforce 3540 all-in-one.

    How can I get Acrobat 9 to recognize my new device, epson Workforce 3540 all-in-one.

    Hi plichy,
    Are you able to print to your new printer from other applications, or is it just Acrobat that doesn't recognize the printer? This document outlines some printer troubleshooting tips, and is a really great place to start: Troubleshoot PDF printing | Acrobat, Reader
    Please let us know how it goes.
    Best,
    Sara

  • How can I get Lr 5 to recognize my iPhone 4s as a device to copy and import photos?

    How can I get Lr 5 to recognize my iPhone 4s as a device to copy and import photos?

    It does not work! This occurred since I upgraded to the iOS7 software on my iPhone. Apple claims it's an Adobe problem
    Sent from my iPhone

  • I can see my IPhone in my Devices list when I connect with a USB but can't see my IPod when I connect with the USB.  How can I get my computer to recognize my ipod

    I can see my IPhone in my Devices list when I connect with a USB but can't see my IPod when I connect with the USB.  How can I get my computer to recognize my ipod

    iPod not recognized in 'My Computer' and in iTunes for Windows

Maybe you are looking for

  • Printing the Name and State of Servers

    Hi, Please can somebody help in executing the below mentioned code which will print the name and state of the servers. Below Java file taken from the following location : http://docs.oracle.com/cd/E23943_01/apirefs.1111/e13951/core/index.html import

  • Flex With Drools

    Does anyone have any pointers on how I can integrate Flex with Drools. I want to build a sample app (for my own learning experience) that will integrate Flex with this Open Source Rule Engine. Can anyone point me to a website or book? Thanks!

  • Delivery address in the PO

    Hi, I have changed the plant address in SPRO. This has updation in T001W & ADRC But still while creating PO, Old address is being displayed in Delivery address Tab. Checked the Table T001W, took the Address number ADRNR. When I give the address numbe

  • Upd vhdx file size problem

    Problem: User profile disk is full! 'Disk management' reports 7MB free. Config: we use user profile disks (vhdx file) on Windows 2012 we limit user profile disk size to 1GB (in the Collection settings) when i SUM the directory sizes in my user profil

  • Adobe After Effects not downloading... keep getting an Error 107

    Adobe Download Assistant keeps giving me an Error 107 when I try to download Adobe After Effects. I restart ADA and try to download AE again but it keeps giving me the error. What is weird is that it will download the other software, but just not Aft