How can i get message id as file name in Receiver Mail Adapter
Hi All,
We are working on file to mail scenario. Client requirement is " Attached file name should be the message id" How can we achieve this.
Thanks & Regards,
Purshothamm
Hi,
To have the file name as message id, I think the below blogs can help you
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii
Regards,
Vijay N
Similar Messages
-
Renaming attachment file name in receiver mail adapter
Experts,
I have a file to mail scenario where an xml file is picked up and transformed into the target format in XI which has to be sent as an attachement in an email on the receiver side.
I am getting the mail with the attachement. But I would like to rename the attachment as the name of the picked up file.
I am using Adapter specific message attributes on both sides but the attachment is named as untitled.xml.
Please advise. Can this be achieved by using the swap bean or the message transform bean?
Regards,
ShobhitHi Shobhit,
The module tab of your mail adapter will look like this.
Processing Sequence
Module Name Type Module Key
localejbs/AF_Modules/MessageTransformBean rename LocalEnterpriseBean
sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean mail Local EnterpriseBean
Module Configuration
Module Key Parameter Name Parameter Value
rename Transform.ContentDescription File
rename Transform.ContentDescription attachement;filename="yourfilename.ext"
rename Transform.ContentType application/text;name="yourfilename.ext"
Thanks
Amitanshu -
Not renaming attachment xml file name in receiver mail adapter
Hi,
I receive SOAP from GRC and need send to Partner an email.
I have SOAP to MAIL scenario where an xml file is picked up and transformed and zipped into the target format in XI which has to be sent as an attachement in an email on the receiver side.
I am getting the mail with the attachement. But I would like to rename the attachment as the name "NFE.XML" and the ZIP File as the name "nfe.zip"
I am using MAIL adapter with Modules above.
Number Module Name Module Type Module Key
1 AF_Modules/PayloadSwapBean Local Enterprise Bean Transform
2 AF_Modules/MessageTransformBean Local Enterprise Bean ContentType
3 AF_Modules/PayloadZipBean Local Enterprise Bean zip
4 sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean Local Enterprise Bean mail
Module Configuration :
Module Key Parameter Name Parameter Value
Transform swap.keyName payload-name
Transform swap.keyValue NFE
ContentType Transform.ContentType application/xml; name="NFe.xml"
zip zip.filenameKey ContentType
zip zip.mode zip
I am using transport protocol "XIPAYLOAD" and set "KEEP ATTACHMENTS"
I have with result example above :
Name from ZIP : PayloadName.zipu200E(4KB)u200E
Name from attachment : PayloadName
Regards,
RicardoHi Shobhit,
The module tab of your mail adapter will look like this.
Processing Sequence
Module Name Type Module Key
localejbs/AF_Modules/MessageTransformBean rename LocalEnterpriseBean
sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean mail Local EnterpriseBean
Module Configuration
Module Key Parameter Name Parameter Value
rename Transform.ContentDescription File
rename Transform.ContentDescription attachement;filename="yourfilename.ext"
rename Transform.ContentType application/text;name="yourfilename.ext"
Thanks
Amitanshu -
How can I get a single jar file with NetBeans?
How can I get a single jar file with NetBeans?
When I create the project I get these files:
dist/lib/libreria1.jar
dist/lib/libreria2.jar
dist/software.jar
The libraries that have been imported to create the project are in separate folders:
libreria1/libreria1.jar
libreria2/libreria2.jar
libreria1, libreria2, dist folders are all located inside the project folder.
I added the following code to the build.xml:
<target name="-post-jar">
<jar jarfile="dist/software.jar">
<zipfileset src="${dist.jar}" excludes="META-INF/*" />
<zipfileset src="dist/lib/libreria1.jar" excludes="META-INF/*" />
<zipfileset src="dist/lib/libreria2.jar" excludes="META-INF/*" />
<manifest>
<attribute name="Main-Class" value="pacco.classeprincipale"/>
</manifest>
</jar>
</target>
Of course there is also the project folder:
src/pacco/classeprincipale.form
src/pacco/classeprincipale.java
Can you tell me what is wrong? The error message I get is as follows:
C:...\build.xml:75: Problem creating jar: archive is not a ZIP archive BUILD FAILED (total time: 2 seconds)This is not a NetBeans forum, it is a JDeveloper forum. You might want to try http://forums.netbeans.org/. I also saw your other question - try looking in the New to Java forum: New To Java
-
How can I get rid of other files on my mac ?
how can I get rid of other files on my mac ?
Hope this helps.
1. Empty Trash.
http://support.apple.com/kb/PH10677
2. Delete "Recovered Messages", if any.
Hold the option key down and click "Go" menu in the Finder menu bar.
Select "Library" from the dropdown.
Library > Mail > V2 > Mailboxes
Delete "Recovered Messages", if any.
Empty Trash. Restart.
3. Repair Disk
Steps 1 through 7
http://support.apple.com/kb/PH5836
4. For more on this and very helpful tips:
http://pondini.org/OSX/DiskSpace.html
http://pondini.org/OSX/LionStorage.html
5. Disk space / Time Machine ?/ Local Snapshots
http://support.apple.com/kb/ht4878
6 Re-index Macintosh HD
System Preferences > Spotlight > Privacy
http://support.apple.com/kb/ht2409 -
I had renamed my user login name and assumed that there will be no change in the settings and files. When I login with the new profile name everything is gone. How can I get back all my files and settings? Please help. Thanks.
You should have asked this before you tried: Changing username or short name- User Account and Short Name- OS X- How to change user account name or home directory name.
-
How can we get tag of XML file using SAX
Hi ,
I'm parsing one SAX parser , I'have almost done this parsing. i have faced problem for one case, i'e how can we get tag from XML file using SAX parser?
XML file is
<DFProperties>
<AccessType>
<Get/>
</AccessType> <Description>
gdhhd
</Description>
<DFFormat>
<chr/>
</DFFormat>
<Scope>
<Permanent/>
</Scope>
<DFTitle>gsgd</DFTitle>
<DFType>
<MIME>text/plain</MIME>
</DFType>
</DFProperties>
I want out like GET and Permanent... means this one tag which is present inside of another tag.
Handler class like
public void startElement(String namespaceURI, String localName,
String qName, Attributes atts) throws SAXException {
if(_ACCESSTYPE.equals(localName)){
accessTypeElement=ACCESSTYPE;
public void characters(char[] ch, int start, int length)
throws SAXException {
if (_ACCESSTYPE.equals(_accessTypeElement)) {
String strValue = new String(ch, start, length);
System.out.println("Accestype-----------------------------> " + strValue);
//System.out.println(" " + strValue);
public void endElement(String namespaceURI, String localName, String qName)
throws SAXException {
if (_ACCESSTYPE.equals(localName)) {
_accessTypeElement = "";
. please any body help meHi ,
I have one problem,Please help me.
1. How can I'll identify where exactly my Node is ended,means how how can we find corresponding nodename? in partcular place
<Node> .............starttag1
<NodeName>Test</NodeName>
<Node>................starttag2
<nodeName>test1</NodeName>
</Node>..................endtag2
<Node>.....................starttag3
<NodeName><NodeName>
<Node> .........................starttag4
<NodeName>test4</NodeName>
</Node>.......enddtag4
</Node>...........end tag3
</Node>............endtag1
my code is below
private final String _NODENAME = "NodeName";
private final String _NODE = "Node";
private String _nodeElement = "";
private String _NodeNameElement = "";
public void startElement(String namespaceURI, String localName,
String qName, Attributes atts) throws SAXException {
if (_NODENAME.equals(localName)) {
NodeNameElement = NODENAME;
if(_NODE.equals(localName)){
System.out.println("start");
if (_NODENAME.equals(localName)) {
NodeNameElement = NODENAME;
public void characters(char[] ch, int start, int length)
throws SAXException {
if (_NODENAME.equals(_NodeNameElement)) {
String strValue = new String(ch, start, length);
String sttt=strValue;
System.out.println("NODENAME: ************* " + strValue);
if(_NODE.equals(_nodeElement)){
if (_NODENAME.equals(_NodeNameElement)) {
String strValue = new String(ch, start, length);
String sttt=strValue;
System.out.println("nodevalue********** " + strValue);
public void endElement(String namespaceURI, String localName, String qName)
throws SAXException {
if (_NODENAME.equals(localName)) {
_NodeNameElement = "";
if(_NODE.equals(localName)){
System.out.println("NODENAME: %%%%%%%%%");
please help me. How can I figure node ending for particular nodename -
How can I get GV and HDV files imported to Premier Elements 13. I know now that they are not supported. But does it exist ways to get them. I use camera HDR-HS7E?
skjeggi
What is this HDR-HS7E - a miniDV camcorder that lets you do DV and HDV capture firewire?
True, the DV and HDV capture firewire into the Premiere Elements 13 Capture window is gone. But, have you
looked at the workaround suggested by PRE_help in this forum. The workaround is found in the following
Adobe document....
http://helpx.adobe.com/premiere-elements/kb/removed-features-formats-elements.html
When your schedule permits, please let us know if that worked for you.
Thank you.
ATR -
How should we get the out put file-name same as in put file-name in file to
Hi frnds,
having hundreds of files in the sender system with different names, how should we get the out put file-name in the receiver system same as the in put file-name in file to file scenario ?
Thanks in advance.
truly,
snrvakiti.Hi,
In Receiver File Adapter you can set under 'Adapter-Specific Message Properties'
check Use Adapter-Specific Message Properties
check Fail on Missing Adapter Message Properties
Check File Name
Have a look at this link, [File_to_File|http://allsapnetweavernotes.blogspot.com/2008/09/how-can-i-access-filename-from-fileftp.html]
Regards,
P.Rajesh -
How can I get a list of database names from environment
Hi,
How can I get a list of database names from environment.
I had found a method in JE API Docs named Environment.getDatabaseNames(), and i couldn't found the same method in Berkeley DB.
I use java interface, is it supported?
Thanks.Hello,
I don't know if it would work for you, but have you checked the db_archive utility at:
http://download.oracle.com/docs/cd/E17076_01/html/api_reference/C/db_archive.html
Check the -s option.
Thanks,
Sandra -
To test how can we use the opt 'logical file name' to name the file based
Hi Sir/Madam,
to test how can we use the opt 'logical file name' to name the file based on the selection made in the dtp run for extracting data as flat file.Hi Vishali,
In the DTP select the file location as application server and give the logical file path. The actual file and logical path can be created using transaction "FILE" and "AL11".
Rest of the process is same as that of extraction from local file.
Regards,
Durgesh. -
I lost all of my artist names and album names for my iTunes library. They are all now on one album. How can I get the album and artist names back?
I have a script called ExportImport for this task, but it only runs in Windows.
In principle something similar should be possible in AppleScript, but I don't currently have access to a Mac to write it myself.
tt2 -
How can I get rid of cache files?
Premiere Pro, can't find cache files on Mac, not in the common folder, clean doesn't work, I know there are Gigs of them on my drive. How can I get rid of them?
I started a premiere project I had worked on before using an external drive but forgot to hook up the external drive. In a few minutes, Premiere loaded 5 gigs of cache files onto my macbook pro drive OSX 10.8.6. I tried the following to free up the space:
Tried to "clean" the cache folder before switch it to the external drive - this only removed a small amount of the 5 gigs created
Tried to find files in the Application Support/Adobe/common folder - no cache files found
Tried searching the web for answers - no new info
Tried searching my drive for the files - can't find them
Tried restarting the MacBook and Premiere with and without the external drive - no luck
Now what?
Message was edited by: Kevin Monahan
Reason: please make a shorter and more concise title next time. Thanks.First off, exactly which version of Premiere are you running? Not simply PPro CC or CC2014 but the version number shown in the About box.
I'm not clear whether you're saying that Premiere can't find the cache files or that you can't find them.
I gather that you're referring to the Clean button on the Media tab of the Preferences dialog, which is also where you set the path for the cache files.
Are you sure you're looking in the correct Library--not the one that's readily accessible under Macintosh HD but the one that Apple, in it's infinite wisdom, hides from users. To access it, open the Go menu and press Option. -
How can I get the directory.xml file for WL6.0?
I have installed the ALBPM Enterprise WL6.01 and started it in my server.But I get the error message when I login.
directory configuration runtime fails to initilize with
resource:/Aqualogic/j2eewl/tomcate/webapps/../../webapps/webconsole/WEB-INF/directory.xml
How can I get the XML file?aaa, ok i misunderstood your first post, i thought you are talking about unable to use the directory.xml from your application.
Ok, well the directory.xml file that ALBPM uses is allways in /albpm6.0/j2eewl/conf/directory.xml if we are not talking about Standalone. And when you start your albpm server it picks up the directory.xml file from there. But it picks him up only when you start it...so if you made any changes to it, you have to restart the server.
You should check the instalation folder of your ALBPM.
If you want to change the user/pass in the directory.xml change it in that folder and restart ALBPM.
If you don't know how to enter new password you have to use this sintax:
<encrypt>newPassword</encrypt>
Because if you open the xml file you have only <encrypted> tags, and you can't change those.
I don't know what the xml file is doing in that tomcat folder though...maybe it get's copied to that location when you start the albpm WL
Hope this helps
Edited by Lex_ at 12/13/2007 10:27 PM -
Today some kind of update happened on Firefox without me even approving it. Suddenly, I no longer have the tabs across the top that I REALLY liked--File/save as, Bookmark, View, etc. I WANT THEM BACK. Yes, I have found the little goofy drop-down icon on the right corner of the screen, but I don't like that. How can I get old view back???
Thank you!
ASM432Right-click on the Tab Bar and select '''Menu Bar'''.
Maybe you are looking for
-
Generate pdf with apex listener 2.0
hi, we would like to generate pdf out of apex. as long as we have text (IRR) WITHOUT special characters (öäü), everything is working fine. when we have this characters in a text-columng (IRR), then we get a .pdf with the following content: javax.xml.
-
Premiere Elements 11 .iso Image für Blu Ray erstellen
Hallo, Kann man mit Premiere Elements 11 ein iso Image für blu rays erstellen? Habe es mit dieser anleitung versucht, aber mir wirt der isoauswahlbereich nicht angezeigt (nur Ordner oder Disk) Adobe Premiere Elements – Hilfe | Freigeben auf DVD oder
-
Unable to reinstall OS X Mountain Lion
I am attempting to reinstall Mountain Lion. My MacBook Pro would not bootup last night, I received a grey screen and then it would just shutdown. 1. I tried removing the battery and keeping it plugged in, and the machine did the same thing. 2. I am u
-
Ok so I've finished my site and ready to publish. It seems muse does this strange thing sometimes. I export the files, i publish it, exept when i look on my site online the text and photos are not there but when i go into the program, everything is t
-
Bubble chart appearance option
hello, on the series window of the appearance tab is an option called current value. one of the options in this drop-down list is "sizes" what is this option suppose to change the size of? i changed the font size option to 72, but did not see anythin