How can I get Mission Control to Unstack all of my Applications?

When I have multiple applications open in the same desktop and I swipe 4 up to access my different applications mission control always stacks my applications on top of each other, this occurs usually when i have 3 or different applications open, Is there is setting where i can get it so it used to be like snow leopard and all my applications are seperated and not stacked on top of each other?
here's a pic of what it looks like. Any help will be appreciated

you mean something like this (see below)?
Now you may have to implement code to check if the destination folder exists and to create it, etc. But if you use the Front Panel Control to select the destination folder, it should be okay.
Not the best implementation, mind you but you'll get the idea..
Message Edited by JoeLabView on 04-18-2007 03:43 PM
Attachments:
copy folder contents.PNG ‏10 KB

Similar Messages

How can one use Mission Control with two monitors? Please bring Spaces back

How can one use Mission Control with two monitors. With Spaces I could treat each space as a single desktop.
SyBB

I use two monitors at work and have no issue. I have my mail set to use Desktop 1 and iTunes set to the second monitor of Desktop 1. I have browsers set to Desktop 2 and Fusion and RDC set to Desktop 3.
Two things that may help you. In System Preferences > Mission Control, disable the setting "Automatically rearrange spaces...". This screwed with assigning applications to certain spaces. And the other thing is don't use full screen on apps that support it. This just makes your second monitor superfluous.

How can I get a file to copy all of the files in a directory except itself and the source of the copy function will be the directory the final program is in?

How can I get a file to copy all of the files in a directory except itself and the source of the copy function will be the directory the final program is in? This application must be in Lab View 8.

you mean something like this (see below)?
Now you may have to implement code to check if the destination folder exists and to create it, etc. But if you use the Front Panel Control to select the destination folder, it should be okay.
Not the best implementation, mind you but you'll get the idea..
Message Edited by JoeLabView on 04-18-2007 03:43 PM
Attachments:
copy folder contents.PNG ‏10 KB

How can i get to itunes to store all data on an external drive

how can i get to itunes to store all data on an external drive rather than the drive ITUnes run off. I can get photos and music off but my apps and movies seem to go to the drive where itunes is run from?

See if this helps:
http://support.apple.com/kb/HT1364

How can I get my Aperture library back from the Photos application?

As stated above, How can I get my Aperture library back from the Photos application? I'm not a fan of Photos right now and haven't used iPhoto in years, so that wasn't a loss... I didn't realize when I gave Photo's access to my Aperture library, I was going to lose it...
I want to get it back, any suggestions?
Thanks again!
MacTeacherMN

what means ..."Once you open the Aperture library back into Aperture..."? What do I need to "klick" in order to getting back my old Aperture Project structure....

I just downloaded iCloud on my PC and noticed that fewer than half of my photo stream photos have transferred over to my PC. Why is this happening and how can I get the remaining photos? All of my devices are charged and have perfect internet signals.

I just downloaded iCloud on my PC and noticed that fewer than half of my photo stream photos have transferred over to my PC. Why is this happening and how can I get the remaining photos? All of my devices are charged and have perfect internet signals. Thanks in advance for any tips and insights!

It's probably happing because photo stream photos only remain in iCloud for 30 days (even though your last 1000 photos will remain on your devices until deleted). When you enabled photo stream on your PC you would have only received photos from the last 30 days.
To transfer older photos to your computer, create a shared photo stream that contains them and invite yourself as a subscriber (see http://help.apple.com/icloud/#mmc0cd7e99).

How can i get ride od duplicates as all my mac has sinced so i have thousends of photos

how can i get ride od duplicates as all my mac has sinced so i have thousends of photos

Katrina...
Try the links posted by Old Toad here > https://discussions.apple.com/thread/3122008

How can I get the host adresses of all computers in a local network

I want to learn that how can I do this with java?
I have a solution as iterating and checking with InetAdress.getHost("iteratedhost"), if no exception such host is reachable.
But I search for better solutions

MulticastSocket is a good option as I shortly
evaluated.
ThanksThis does not allow you to find all the IP address of
all computers on a network. It will enable you to
send information to any computer that is a member of
a particular IP Multicast Group.He doesn't seem to really need to know all the IP addresses. He just seems to want to "find" a server. Looks like MulticastSocket is kinda for that purpose, broadcasting a message out for someone to respond to. That response could be: "I'm the server you want - my IP address is x.y.z.a". Then he would use a normal Socket to bind to that guy. Maybe it's a good solution, maybe not. Just giving him a possible route. MulticastSocket must be good for something.

How can i get manual control of my iPod while it's connected to an in-car accessory?

Hey Guys,
I'm hoping you'll be able to help me!
I have a Pioneer stereo system in my car which has an iPod adapter to which I connect my iPod and thus am able to play my iPod tunes through my car stereo.
Now, while to iPod is plugged into the accessory the iPod's manual function (I.e. I am not able to physically press the buttons on the iPod to change tracks) and the iPod can only be accessed through the cars stereo system.
So, my question to you is this;
Is there any way, any jailbreak, any tweak I can do to the iPod or the car stereo that will allow me to gain manual access over the iPod while plugged into the cars accessory?
Many thanks in advance

Many receivers (like my JVC and Alpine receivers) have a "head mode" or "iPod mode" setting that can be selected for the iPod input. Head mode is receiver control while iPod mode lets you control from the iPod although the volume will still be set by the receiver. Check it out. The Pioneer might do the same thing.

How Can I Get SPAM Control On iPad Email?

I have a shared email account on my Mac and iPad. When checking email on the Mac no spam, when checking email on iPad Spam Galore! Is spam control possible on the iPad or is this something your have to live with?

I see, though I would still believe that Verizon would have a similar email address to which you could forward the spam message. As a bit of a longshot o wuld try to call Verizon tech support and see if they have any way to add email addresses to the universal spam filter. Don't give up hope, we all know dealing with any kind of repetitious spam can make our iPad user experience less than exciting. Cheers!

How can I get my controls back on I OS 7

So for some reason after we updated our 4s iPhone and now only one phone has controls for iCloud Facebook imessanger and everything is so slow

All sales are final

How can I get the measured data of a compiled LabView application via active X?

I want use data measured by a compiled labview application in a visual basic program by the way of active x. i your knowledge base is only explained how to do this with a notcompiled vi
or how to call a compiled vi but not how to get the properties.

A. Rafiq's reply / answer is just exactly what I was looking for as well. I'm using it with VBA for an Excel application.
Note that the differences between this and the "not compiled" VI is that the application is the compiled application name, versus LabVIEW.
Additional information:
Remember that when you build the application, it puts the VI(s) in a wrapper app, which requires the Run-Time Engine.
In order to access the VI, you have to get a reference to it. Doing this starts the app.
Now the VI's methods and properties are exposed.
With the GetControlValue and SetControlValue
methods of the VI you can access all of the controls on the front panel.
Remember that the values returned from the GetControlValue method are of type Variant.
If you find you h
ave some trouble getting data in or out of your (LabVIEW) ActiveX server app, you can also easily write a VI to access the server.
Remember that if you want to run these, the ActiveX server (LabVIEW) and the VB client app, on a remote machine you must:
Install on the target machine the LabVIEW RTE (which you can include with Application Builder.
Running the server app once on the remote machine before running the client is a way for the server app to register itself (at least in LV 5.1).

How can I stop the control button from moving the open applications up and exposing the desktop?

It is getting very annoying when I want to use the control button for other functions.
I tried looking in settings under keyboard, but found nothing.
If anybody knows how to change it, I would really appreciate it!
Thanks,
Neel.

Please describe what you are doing and what is happening more fully. I can press the control key all day long and nothing happens.

How can I get a Printed list of 'all' of my playlists and the songs that are in each list

I want to get a printout of 'ALL' of my playlists and the songs that are in each one. All at once.

And you are aware of the possible options for listing the months and having an optional export value for each month.
For listing the months, you can use a number, a 3 character string, or the full name.
For the export value, the full name, the 3 character value, the 1-2 number, or the 0-11 JavaScript value.
I would look at deciding how you want to populate the drop down box and build a one page form with just this field. You can then insert that page into a PDF and copy the field as needed and then delete the inserted page. Or you could create an FDF file to create the drop down box.

How can I get another Installation Disc (DVD) for my CS5 Application

I lost one of my DVD installation discs from my CS5 set. I called Adobe and they said it was an older version and they don't have a link for me. Does anyone know how I can get ahold of the CS5 Application disc???

Welcome to the forum.
Adobe used to offer replacement discs for a minor charge.
However, that was usually for ONLY the current version - nothing available before. Once a version passed into history, the replacement discs were history too.
With the advent of Ps CC, I am not even sure if the Ps CS 6 replacement dics would be available now.
I would contact Adobe Customer Support (not Technical Support), and inquire.
Good luck,
Hunt

How can I get Mission Control to Unstack all of my Applications?

Similar Messages

Maybe you are looking for