How can I get my Canon i860 to print scale correctly?

The preview looks ok but if I print a page at 100% not all the info gets printed.
iMac G5   Mac OS X (10.4.5)  

Your question is somewhat vague, but if you are not printing the edges of documents, then you probably are using the default "Any Printer" in Page Setup..., rather than Canon i860. The Any Printer option probably has smaller margins than your printer. Once you have made the change, you will probably want to save it as default in the Page Setup... dialog, which you can do in the pop-up menu for Page Attributes.

Similar Messages

  • How can I get my Canon MF8350CDN to print using Airport Express USB on Lion?

    I just installed a new airport express with USB to my MF8350CDN.  When I add the printer, it sees the printer, loads the UFRII driver (from my download from canon) and opens a print que.  However I try to print a test page it gives me "cmjcInitialize Error" , printer is offline, canon CMFP printer driver, check power and connection.  I print from the PC without a problem but I had to connect using IP printing to the airport's IP address.  Is there something that I am missing during the installation? 

    Hi ronthet,
    This is an older post.  Hopefully you have resolved your issue, but just in case you have not.
    I have not personally tested a USB External Printer server for some time.  I would like to look into your IOGEAR Print Server, can you send the model number of the IO Gear PrinterNum?
    Thank you,
    Kaz
    Kazman
    I am an HP Employee
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution

  • E mail bt print very small and i cannot change it. how can I get my e mails to print readable size

    HOW CAN I GET MY E MAILS TO PRINT TO READABLE SIZE. BT YAHOO WINDOWS 7 HOME PREMIUM HP DESKJET F2480
    NO FONT AVAILABLE TO CHANGE SIZE TO PRINT TO READABLE SIZE EG FONT SIZE 12 OR 14. DISPLAYS ON ABOUT SIZE 8
    ALSO HAVE TO CLICK FULL VIEW TO READ. THIS HAS SUDDENLY APPEARED, DID NOT HAVE FULL VIEW ETC BEFORE .

    Go to the following address: https://account.services.mozilla.com/
    If you DO NOT remember your password, press the "Forgot your password?" link and it will be sent to the e-mail address that you used for registration.
    Enter your e-mail address and your password. Follow any additional prompts. '''This should remove your account and all Sync data associated with your account from the servers.'''
    Then, set up a new account.
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

  • How can I get my clock to remain on the correct time when starting bootcamp and windows XP? wireless option is not available.

    How can I get my clock to remain on the correct time when starting bootcamp and windows XP? wireless option is not available.

    Have a look at solutions in here https://discussions.apple.com/message/10689317#10689317
    Regards
    Stefan

  • How can I get adobe reader document to print text?

    How can I get an adobe reader document to print the text not just the formatting?

    Hi sarahjacobs777,
    Please elaborate your issue so that i can assist you better.
    Regards,
    Rahul

  • How can I get my Pro-100 to print 12x12 page size? It won't let me set that size.

    I use 12x12 paper for scrapbooking.  Every time I set the paper size for 12x12, the printer says to choose the A3 size (11 x 16).  But then there's a wide margin of white left over.  How can I get the printer to print edge to edge?

    You need to buy a paper trimer.  Office Depot has several to choose from.  Believe me and save your self a lot of headache and just get the trimmer.  Print what you want on a larger size paper that the Pro-100 accepts and trim away.
    Are you using a post editor like Photoshop Elements?  If not I highly recommend you buy it, too.  There are others, some are even free, but PSE is the best.
    EOS 1Ds Mk III, EOS 1D Mk IV, EF 50mm f1.2 L, EF 24-70mm f2.8 L,
    EF 85mm f1.2 L II USM, EF 70-200mm f2.8 L IS II,
    Sigma 120-300mm f2.8 EX APO, Photoshop CS6, ACR 9, Lightroom 6

  • How can i get my email picture to print from my computer

    how can i get my printer to print from eprinter

    Hi,
    Connect your printer to the network router.
    1. Wireless>Wireless Settings>Wireless Setup Wizard.
    2. Enter the router password to connect your printer.
    or
    1. Run the HP software and select the network/wireless connection method.
    After printer is successfully connected to the network, enable Web Services/ePrint.
    1. Press the ePrint button on the printer or the Web Services icon on the printer front panel.
    2. Press Yes to accept terms of web services.
    3. Press Yes to accept future updates.
    4. A page will printout showing you how to register your printer's new email address which you will use to send your ePrints to.
    Please click the blue Kudos star in the post that helped you.

  • How can I get my HP 6515 to print photos

    How do I get my HP 6515 to print photos on standard paper from the standard bottom tray (8 1/2 x 10). I keep getting messages that my photo tray needs paper, I don't want to use that tray. Thanks.

    Hi there,
    Could you provide the community with a little more information to help narrow troubleshooting? What operating system and what program are we printing from?
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • How can I get my hp 4700seris wifi printer print stuff from my ipad

    How can I get my hp 4700series photosmart wifi printer print stuff from my iPad??????

    Try the HP print application, Printopia, Print n Share or Airprint Activator.
    http://support.apple.com/kb/HT4356?viewlocale=en_US&locale=en_US
    Message was edited by: deggie

  • How can I get my Officejet 4500 to print from my ipad

    Can someone please help me. I can only get my Officejet 4500 to print while I am in the app eprint.

    Hello,
    You may only print via the HP ePrint app indeed.
    As you may find listed below, the specific model do not support Apple's Airprint:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02814760&cc=us&dlc=en&lc=en&product=3919449&tmp...
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • How can I get my Canon 885 to work on my Macbook Air - no software download from Apple?

    I have a Canon 885 printer, and can't get a download from Apple for it.
    I hacve downloaded the file from Canon, but the computer doesn't seem to want to see it.
    Can anyone help?

    I didn't see that your printer was supported, but since you didn't supply the full model (letters), you can check to see:
    http://support.apple.com/kb/HT3669
    If it is supported, here is a link to Canon drivers:
    Canon: http://support.apple.com/kb/DL899
    Printer setup:
    http://support.apple.com/kb/PH11145?viewlocale=en_US

  • HT3771 how can i get my canon mg2100 to only print in grayscale/black i have an mac os x10.6.8

    I have a canon mg2100 i want to have it print in only grayscale for somethings. However, there is no place I can find to select this option.
    It is connected to my mac desktop with an os x 10.6.8 operating system. How can I fix this?

    The only way I know is to have yor doc  ready to print, command P, then when the printer window comes up, select >presets>fast plane paper black and white.   Hope this helps.

  • How can I get my HP 6525 to print double-sided?

    When I try to print from a Word Document, I do not get the choice to print double-sided. How can I make that happen?

    Do you get an option for two-sided printing in other programs?  What is your operating system?  
    The driver may need to have the duplexer set as "installed", see the Vista/Win 7 Duplex Printing Troubleshooting Guide here.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • HOW can I get a STATUS OF TRIGGERs  TO FIRE CORRECTLY ???

    Hi all,
    I had trouble with a migrated DB (7.3.4 -> 9.2.04) why all important TRIGGER did not fire (Business Rules).
    I could see all TRIGGERS WAS VALID with:
    SELECT a.object_name FROM all_objects a
    WHERE a.object_type = 'TRIGGER'
    AND a.status = 'INVALID'
    AND a.owner = Decode(Upper('SCHEMA'), 'ALL',a.owner, Upper('SCHEMA'));
    but they DID NOT FIRE !!! (After recompiling all works well)
    This is a production DB and I must:
    - simulate this state - HOW can I do it ?
    - HOW can I select this TRIGGER STATE in my PRODUCTION
    system to re-compile this triggers ???
    I must prevent this state on triggers before the user writes data from Forms to the Database:
    if NOT TRIGGER_FIRE('Trigger') then RECOMPILE('Trigger'); end if;
    Has anyone a good solution ?
    Thanks in advance
    Friedhold

    Are you sure the triggers have been correctly imported? That they have been imported in the right user schema?
    I remember having some problems with triggers when importing in an Oracle 8.0.5 database: the triggers got to be on tables in another schema.
    And are they enabled?
    Check the sys.all_triggers view:
    select * from all_triggers where owner = &my_schema
    and see the status column if it is "ENABLED".

  • How can I get my outlook 2011 to print a list of attachments to a message

    I can't get my Outlook to print a list of attachments when I print a message.

    Outlook is a Microsoft product. The forum is here:
    http://www.office-outlook.com/outlook-forum/

Maybe you are looking for

  • Go to Bookmark target is hidden. Is it possible to show when the action is triggered?

    Hi all, Per the Title, I have an SSRS report with a summary tablix at the top. The body cell has the Action: Go to BookMark. The target is a second tablix set up with drilldown. The groups are hidden by default. When the action occurs, the report jum

  • AP Discount on Vendor Payment

    Hi FI Gurus, Can you please help with the below.... When I run Payment program for Vendor (Transaction F110), system is taking/considering the discount amount even after the expiry of the cash discount period (as per vendor/invoice payment terms). Id

  • Broken pipe error in plugin log

    Hello All, Any help will be much appreciated. Currently we have a webserver and weblogic servers(two) in the same box. The webserver is IPlanet and it communicates with weblogic(7.0 SP2) using the weblogic plug-in. Normally the webserver connects to

  • Notes app malfunctioning?

    Has anyone else experienced extreme malfunction in the Notes app? I lost 1/2 of my notes in the new upgrade. And now, the app is not useable. When I attempt to type in a new note, it creates a new copy each time it does a save. So every 10 seconds or

  • I can't get my ipad3 to backup using iCloud.. It times out right at the end of backup

    I can't get my ipad3 to backup using iCloud.. It times out right at the end of backup. The blue bar nearly fills up and right at the end a message pops up saying the backup could not be completed.