How can I get my desktop filterId use PDK?
Hi, Expert
getNavigationfilterId() in NavigationFilter Class can get Navigation's filterId.
I want to get filterId value in desktop that Filtered group.
How can?
Regards,
Honam
getDesktopFilter
String getDesktopFilter(IPortalComponentRequest request)
Returns the value of the Filter ID property for the desktop, associated with the request
Parameters:
request - the portal component request
Returns:
the value of the current desktop Filter ID property, or null, if filtering is disabled
Similar Messages
-
How can I get my desktop display to go to 1440*900?thanks[solved]
I am using KDE 4,My problem is I can't set my graphics display to 1440*900
In my searching
I've found this on the Ubuntu forum, which seems to be my issue. It doesn't matter what I set up in xorg.conf file, it ignores it.
It references a file called "kcmrandrrc", which doesn't seem to exist on my system. I am not sure where KDE is getting the 320x200, 320x240, 400x300,...,640x480, 800x600 and 1024x768 graphics modes. It's not from xorg.conf.
I found this file...
"krandrrc"
Which contains the following...
[Screen_0]
OutputsUnified=false
UnifiedRect=0,0,0,0
UnifiedRotation=1
[Screen_0_Output_CRT1]
Active=true
Rect=0,0,1154,768
RefreshRate=0
Rotation=1
How can I get my desktop display to go to 1440*900
thanks
Last edited by icywalk (2010-01-27 10:18:30)What I was looking for was something along these lines:
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
Option "NvAGP" "3"
Option "Overlay" "False"
Option "ConnectToAcpid" "False"
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Then you put in the 1400x900 that you wanted in the Modes line.
If you are to use Xorg -configure successfully, you will need to do it from a console screen. If you are using like kdm or gdm, I would suggest that you log out, then go to a console screen (<ctrl><alt><f1>) and then log in to an account. You will need to su, and then issue the following command to shut down x: telinit 3 that command should shut down X and your login manager.
After that you can run Xorg -configure and do whatever else you need with it.
Then, to get back to what you had before, the command telinit 5 should restore you back to your gdm or kdm or whatever. (Normally <Ctrl><Alt><F7> will get you back to your login manager, if it doesn't try F6 or F8 until you find it.)
HTH -
How can we get ADFSecurity work when used in OC4J, OID and OAM?
I am getting error in http server log "mod_oc4j: Response status=499 and reason=Oracle SSO, but failed to get mod_osso global context."
But I am not using Oracle SSO and my client doesn't want to use it either, I am using OAM SSO(CoreIDSSO) in my configuration. Please read the details below.
I am using ADFSecurity in an app that is protected by OAM. To migrate ADFSecurity permissions from
system-jazn-data.xml to OID, I used JAZNMigrationTool to populate OID with Grantees and Permissions. OAM gives login page, and authentication works fine.
But ADFSecurity is not working. ADFComponent Delete button is enabled even for roles that dont have permissions for the iterator delete.
- The app works fine when I use without OAM. ADF Security permissions work fine.
- The app works fine when used with OAM, but with ADFSecurity disabled (enforce=false).
- When I enforce ADFSecurity alongwith OAM, ADFSecurity is not working.
In the doc "Oracle Containers for J2EE Security Guide b28957", there is a mention of use of CoreIDPrincipal for permissions. Our OID Permissions entries show
LDAPRealmRole for attribute orcljaznprincipal. I am not sure if this could be the reason.
We have configured AccessServerSDK for the SOA instance and have policy for the urls in the policy manager. We have entries in orion-application.xml, orion-web.xml and system-jazn-data.xml as per the documentations.
How can we get ADFSecurity work when used with OID and OAM?Have you been able to successfully integrate OAS with OAM & OID? We have similar requriement and so far we have not been able to get it working.
We have application specific roles which we map to OID roles using orion-application.xml.
Any pointers to achieve this would be greatly appreciated.
thanks,
Dipal -
Than how can i get java class by using it's class file?
Hi
After compilation of a java program, it creates a class file.
After getting class file suppose class file has been deleted.
Than how can i get java class by using it's class file?
Thanks in advance.get a decompiler and run your class file through it--I'll assume you want the source code back and that you are not trying to recover a missing class file by attempting to use the class file that is missing--if it's missing, then I've not a clue on how to get it back by using what is already missing.
BTW: many of your compilers have source control--if it does, just restore your missing file. -
Hi Experts,
How can i get a file header using this method cl_gui_frontend_services=>gui_download
Thanks
BasuHi,
You can use the FM - GUI_DOWNLOAD to specify the headers. It can be done in the following manner -
TYPES: BEGIN OF ty_head, "Structure for header
h(10) TYPE c,
END OF ty_head.
DATA: it_head TYPE TABLE OF ty_head WITH HEADER LINE.
"Adding header details
it_head-h = 'Field1'.
APPEND it_head.
it_head-h = 'Field2'.
APPEND it_head.
it_head-h = 'Field3'.
APPEND it_head.
it_head-h = 'Field4'.
APPEND it_head.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = p_file
filetype = 'ASC'
write_field_separator = 'X'
header = '00' "<= note this
TABLES
data_tab = it_tab
fieldnames = it_head[] "<= Pass your header table here
EXCEPTIONS
OTHERS = 1.
Hope this helps.
Regards,
Himanshu -
How can I get Firefox to NOT use DDE? If I uncheck it in Windows XP "Folder options" it keeps getting re-checked. When checked, it takes minutes to get Firefox to open on a page linked from Outlook.
Open link/bookmark in new tab in same window:
*Middle-click (press the mouse scroll wheel) the link
*Ctrl+left click the link
*right-click the link, choose "Open Link in New Tab"
Open link/bookmark in new window:
* Shift+Enter on the link
* Shift+left click on the link
See: http://www.7is7.com/software/firefox/shortcuts.html -
How can i get apps with out using credit card info because i do not have a card ?
how can i get apps with out using credit card info because i do not have a card ?
Yo Chris. I've been following your answers to different threads and quite frankly, you're very keen in answering everybody regarding this stupidity that Apple has brought upon its customers. Kudos to you. But the problem is, most of the time, in some devices, your solution doesn't work because the NONE option is not there. The same goes for me.
Meanwhile, I found a temporary workaround for the iPhone 4s, iPad 2 and iPod Touch 4th Gen.
Register a free Apple ID from the iCloud Settings.
Go to Settings>iCloud>Account>Tap Payment Information on the Storage Plan Category.
Fill in the other boxes and choose "None" on Credit Card Information.
That's it! Hope I helped those who still couldn't find the "None" Option.
Must be running IOS 5.0.1 though, else there would be no iCloud. -
How can i get getwayed url string using pluggable nav in news portlet?
hi.
How can i get getwayed url string using pluggable nav in news portlet?
A code just like below is what I want.
<param value="param=http://.../portal/server.pt/gateway/PTARGS_.../http/...">
I tryed the following, but didn't work as I wanted.
1.<param value="<pcs:valueexpr='var'/>">
-> transformed. but I want the prefix 'param=' in the enquoted string's too.
2. <param value="param=<pcs:valueexpr='var'/>">
-> not transformed.
Any idea?
HiroyukiHi all,
We have HPROF functionality in our latest roadmap, so you will see that feature in our next major release called JRockit R28.
I recommend, above from the MemLeak documentation suggested by Makiey, the following information on how to use JRockit tools.
Performance Tuning & Profiling:
http://download.oracle.com/docs/cd/E13150_01/jrockit_jvm/jrockit/geninfo/diagnos/part_02.html
Using JRockit tools:
http://download.oracle.com/docs/cd/E13150_01/jrockit_jvm/jrockit/geninfo/diagnos/part_03.html
Diagnostics & Troubleshooting
http://download.oracle.com/docs/cd/E13150_01/jrockit_jvm/jrockit/geninfo/diagnos/part_04.html
Best Regards,
Tuva
JRockit PM -
How can I get Colorful Tabs to use separate colors for 2 different gmail accounts?
Running Firefox 29.0.1 on iMac OSX 10.9.3. I have multiple Google accounts: 2 gmail accounts and 1 Google Calendar. The Add-on Colorful Tabs will allow me to choose a color for one gmail account , but it also uses that same color for the other gmail account. How can I get different colors on 2 different gmail accounts?
Also, Colorful Tabs is also doing the same thing for my homepage (google.com) and my google calendar. How can I get different colors on these 2?I personally use "Fabtabs" for my mozilla FireFox.
https://addons.mozilla.org/en-US/firefox/addon/fabtabs/
This add-on doesn't have any issues like that when I use it. -
How can I get Sender Display Name using Get-MessageTrackingLog?
Hi, could you please help me. We have got a monitoring system at work which monitors some devices, so if something wrong happening with these devices email is sent from MASTER email (Customer Name <[email protected]>) to us. I'm trying to get a list
of all emails of that monitoring mailbox using PoweShell command
Get-MessageTrackingLog and export them to CSV file. In the end of the day I need CSV file with 3 columns: TimeStamp, MessageSubject and SenderDisplayName! Yes, I need Sender Display Name cause all emails are sent from one MASTER email
(Customer Name <[email protected]>) and only difference between them is sender Display Name which is cexactly what I need.
This is the code I'm using:
Get-MessageTrackingLog -EventId Receive | Select Timestamp, MessageSubject, Sender | Export-CSV C:\NagiosAlerts.csv
–NoTypeInformation
So how can I get sender Display Name(Customer Name) using Get-MessageTrackingLog insted of Sender email (<[email protected]>)?The DisplayName is not recorded in the Logs only the EmailAddresses are so there Is nothing you can do with Message Tracking to get this the way you want. You need to look at another property may soureIP or include something in the Subject
of the Email (eg a customerId in the Subject is a much better option) to give you some differentiation. Otherwise you need to access the Email directly from the Mailbox it was sent to and then extract the DisplayName from the message (or use a journaling
on those emails etc)
Cheers
Glen -
How can I get list of columns used of specific table in all stored procedure?
How can I get used column list of a specific table in among all stored procedure?
Suppose that,
I have a table(VendorMaster) which has 100 columns just I want to know how many columns used in among all stored procedure.We have solved by below query...
IF OBJECT_ID('tempdb.dbo.#SPDependencyDetails') IS NOT NULL
DROP TABLE #SPDependencyDetails
CREATE TABLE #SPDependencyDetails
Or_Object_Database NVARCHAR(128)
,Or_Object_Name NVARCHAR(128)
,Ref_Database_Name NVARCHAR(128)
,Ref_Schema_Name NVARCHAR(128)
,Ref_Object_Name NVARCHAR(128)
,Ref_Column_Name NVARCHAR(128)
,Is_Selected BIT
,Is_Updated BIT
,Is_Select_All BIT
,Is_All_Columns_Found BIT
DECLARE @database_name VARCHAR(100)
DECLARE database_cursor CURSOR
FOR
SELECT name
FROM sys.databases
WHERE database_id =8
OPEN database_cursor
FETCH NEXT FROM database_cursor
INTO @database_name
WHILE @@FETCH_STATUS = 0 --Outer Loop begin
BEGIN
DECLARE @WholeLotofSQL NVARCHAR(MAX) = '
DECLARE @object_name VARCHAR(150)
,@sqlstatement NVARCHAR(2500)
DECLARE object_cursor CURSOR --Inner cursor, iterates list of objects that match type
FOR
SELECT name
FROM '+@database_name+'.sys.objects AS o
WHERE o.type = ''P'' --Change Object type to find dependencies of Functions, Views and etc.
ORDER BY 1
OPEN object_cursor
FETCH NEXT FROM object_cursor INTO @object_name
WHILE @@FETCH_STATUS = 0 --Inner Loop Begin
BEGIN
SET @sqlstatement = ''USE '+@database_name+';
INSERT INTO #SPDependencyDetails
SELECT DB_NAME() AS Or_Object_Database
,'''''' + @object_name + '''''' AS Or_Object_Name
,CASE WHEN referenced_database_name IS NULL THEN DB_NAME()
ELSE referenced_database_name
END AS Ref_Database_Name
,referenced_schema_name AS Ref_Schema_Name
,referenced_entity_name AS Ref_Object_Name
,referenced_minor_name AS Ref_Column_Name
,is_selected
,is_updated
,is_select_all
,is_all_columns_found
FROM sys.dm_sql_referenced_entities(''''dbo.'' + @object_name + '''''', ''''OBJECT'''');''
EXEC sys.sp_executesql @sqlstatement
FETCH NEXT FROM object_cursor INTO @object_name
END
CLOSE object_cursor
DEALLOCATE object_cursor'
EXEC sys.sp_executesql @WholeLotofSQL
FETCH NEXT FROM database_cursor INTO @database_name
END
CLOSE database_cursor;
DEALLOCATE database_cursor;
SELECT Or_Object_Database as 'Database'
,Or_Object_Name as 'Procedure'
,Ref_Object_Name as 'Table'
,Ref_Column_Name as 'Column'
FROM #SPDependencyDetails -
How can I get Genius back. Using 6.1.2
I downloaded update 6.1.2 and noticed that my genius feature is gone when listening to music. How can I get it back??
YOu need to get the videos into the photos app.
So either add the videos to iPhoto, or in a folder.
Plug in the iPad to your computer.
fire up iTunes.
Go to the iPad options, and then to the Photos tab.
Select the folder with videos, or an album with the videos from iPhoto.
MAke sure to tick the include videos tab.
IMovie will be able to delink to the videos again. -
hello :
I have the same question as before.. 4generation Ipod Touch.. That has locked me out.. It says i have to go to itunes to unlock... I didnt think i had a account.. So how can you help me use this..UNLOCK and get it working again.Forgotten Screen-Lock Passcode
Connect the iOS device to your computer and try to make a backup
iOS: How to back up
Then restore via iTunes. The iPod will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
How can I get a report to use a DSN instead of a database name?
DSNs are great things. By using a DSN in a database connection string, you don't have to worry about what happens if you have to look at a different database, or if a database name changes. All you have to do is change the database the DSN points to, and everything that was built using that DSN still works.
Everything, that is, except Crystal Reports.
I am using CR XI. Our customer's database is named "Anneal", and it uses PostgreSQL. I have several copies of that database, taken at different times and for different purposes, on my machine: "Anneal", "AnnealTest", "Anneal_2_8_10", and on and on. I also have a DSN named "WinCaps". The reorts I have developed for this customer were set up to use an ODBC connection based on the WinCaps DSN. But if WinCaps pointed to the "AnnealTest" database when it the report was created, and then I delete the AnnealTest database and change the WinCaps DSN to point to a database named "Anneal", and then try to open the report, I get a complaint that the AnnealTest database does not exist! Yes, I know it doesn't exist. I am expecting CR to use the DSN I told it to use, which should get me to the Anneal database.
The fact that CR complains about the AnnealTest database tells me that internally, CR is retrieving the actual name of the database and storing that instead of storing the DSN name, completely defeating the purpose of the DSN.
Is there any way I can set up my report to use whatever database the DSN happens to be pointing to, instead of the database the DSN pointed to at design time?
Thanks very much!
Rob RichardsonHi Rob,
Crystal assumes you are setting location to the database and it stays that way when run. Yes we do keep the connection info in the RPT file.
There's a few options that may help. First, can you upgrade to CR XI R2? It' still supported...
Go to this link: http://www.sdn.sap.com/irj/boc and download the trial version of CR XI R2 and use your XI keycode, then apply the patches which you can get to by clicking on the BusinessObjects tab above, then Downloads.
Direct link to the Trial version: http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx
Second, in the report itself check on the Verify on first refresh, save the report and then test it on another PC connecting another database.
Next option to to try these registry key changes, usual warnign about altering the registry:
HKEY_CURRENT_USERSoftwareBusiness ObjectsSuite 11.0Crystal ReportsDatabaseOptions - VerifyWhenDBDriverUpgraded = Yes
And try changing this one also - DontAutoConvertODBC = Yes
Close the Designer first or your changes won't stay.
THey may have to simply verify the data manually and then save the report so the updated location info is saved in the Report.
Crystal is very database dependant obviously so asumming changes made to the DSN are automatically updated can cause a lot of issues for the end user also but it depends on your point of view. We consider this working as expected.
Thank you
Don -
How can i get google instead yahoo using firefox 4
every since i updated to ff4 when i search for something it uses
yahoo instead google how can i change it back and the refresh
button does not work any moreOn this computer, it seems impossible to set Google as the default search engine. If I open a new tab and type in a search it always brings up this damn skinny yahoo page that says 'AVG' in the top left corner. The URL says:
http://search.yahoo.com/search?fr=yhs-avg-chrome&type=yahoo_avg_hs2-tb-web_chrome_us&p=Some%20search
Even though I've changed the Keyword.URL in about:config and used Manage Search Engines to delete all other engines except for Google, it is still using Yahoo!
WTF? Is it hard coded somewhere?
[edit]I've uninstalled all Yahoo crap from this XP computer and it still does it! ARG!!!
Maybe you are looking for
-
Post Author: [email protected] CA Forum: .NET I'm having a problem with a linked subreport that I can't get around, so I'm going to finally throw up the flag and ask for help. I'm using VS.NET 2005, and the Crystal Report was originally written
-
How to read the value of Inputfield in WAD in JAVA script?
Hi Experts, I have a requirement in WAD . I have put an Input Field (text box), a button and a script control in the web template. In my script control function , I want to read the value entered in the input field using java script. How do I achiev
-
Problem creation of accounting document impossible
Dear Gurus, I created a new Material Type in reference to "DIEN" Material Type. I have created a Sales Order -> Delivery -> Invoice flow (yes the delivery isn't useful but needed for some flat file sending...). After the creation of the Invoice, the
-
iCloud emails me to say I have exceeded my iCloud storage but Settings tells me I have 18 out of 25gbs available. I can't understand this.... can anyone explain?
-
Session Variable - System/non system
anybody explain me about the system and non system variables? i am very confusing with the documents available in google. can you please provide me with small example? in which case we use system variable and which case we use non system variable? Ed