How can I get my downloads folder to appear in the docking station

How can I get the download folder to remain on the docking station

Note if you don't have any folders on your Dock, note the trashcan is on one side of the dock with a divider between it and applications.  Minimized windows (with the yellow button on the upper left corner) will go between the trash and that divider.  You can drag folders into the section between the minimized windows and the trash.

Similar Messages

  • How can I get google groups mail to appear in the Mail application on my iPhone 5?

    How can I get google groups mail to appear in the Mail application on my iPhone 5?

    Try to use the SearchReset extension to reset some preferences to the default values.
    *https://addons.mozilla.org/firefox/addon/searchreset/
    Note that the SearchReset extension only runs once and then uninstalls automatically, so it won't show on the "Firefox > Add-ons" page (about:addons).
    If you do not keep changes after a restart then see:
    *http://kb.mozillazine.org/Preferences_not_saved

  • How can I get Apple Mobile Device to appear in the Administrative Tools\Services folder?

    My iPhine still won't sync with iTunes. I was instructed to go to Control Panel\Administrative Tools\Services to locate Apple Mobile Devices, but it isn't there. How can I get it there?

    See Here...
    AMDS for Windows
    http://support.apple.com/kb/TS1567

  • How can I get sent emails to NOT appear in the Sent mailbox?  Thanks!

    OS X 10.8.3
    Mail 6.3 (1503)

    mbusa6,
    I agree with what you are saying. He made an assumption without getting all the data.
    You can start with this applescript. She could select the mail that was sent and run this applescript and file them in another mailbox for her to later individually file. Maybe that will help organize it better.
    Good luck.
    tell application "Mail"
              set the_selection to (get selection)
              if class of the_selection is not list then
                        return
              else if (count of the_selection) is 0 then
                        return
              else if class of item 1 of the_selection is not message then
                        return
              end if
              set target_mailbox to "To File"
              try
                        get mailbox target_mailbox
              on error
      activate
                        set the_mailboxes to name of mailboxes
                        set target_mailbox to (choose from list the_mailboxes) as string
                        if target_mailbox = "false" then return
              end try
      move the_selection to mailbox target_mailbox
    end tell

  • How can I get my iPod nano to work on SONY docking station?

    I have a 5th gen iPod nano. I bought a SONY dock and for a couple days it worked fine. I put it on a few days later and no music. When I try to play, it goes to pause. The nano works on my clock radio dock and with my ear buds, but not on this docking station. I've reset the nano but no luck. any thoughts?

    Docking station new and Nano connector is clean

  • I accidently moved my Documents folder to Trash (which was on my Dock, right next to Trash).  Now I cannot get it back!  How can I get my Documents Folder back on my dock?

    I accidently moved my Documents folder to Trash (which was on my Dock, right next to Trash).  Now I cannot get it back!  How can I get my Documents Folder back on my dock?

    Choose Home from the Finder's Go menu and drag it back from there.
    (102536)

  • How can I get a downloaded ringtone/song to appear in the settings/sounds/Ringtones menu area on Iphone 4?

    How can I get a downloaded ringtone/song to appear in the settings/sounds/Ringtones menu area on Iphone 4? Thanks

    You must create the ringtones.  google will find several free ways to do this.
    It will then appear in the "Ringtones" section of your itunes "Library".
    Then you select it to sync under the ringtones tab.

  • Getting as message that says"The folder "Desktop" could not be opened because you do not have sufficient access privileges". How can I get into this folder?

    Getting as message that says"The folder "Desktop" could not be opened because you do not have sufficient access privileges". How can I get into this folder?

    OPen your Users folder, Highlight the Desktop Folder, do a Get Info or CMD+i on it, see if it's locked or if you have Rights & Privileges at the bottom.

  • My iPhone was stolen. How can I get my downloaded music which had not been transferred to my laptop

    My iPhone was stolen.  How can I get my downloaded music if I had not transferred it to my laptop (not an iMac so no iCloud )

    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • How can i get or download the apple hardware test for a macbook pro made in 2012 running Mavericks 10.9.3

    Does anyone know how can i get or download the apple hardware test for a macbook pro made in 2012 running Mavericks 10.9.3. Thanks.

    Sean and Andy -
    I have to agree with Andy here. I am having the same problem on a mid 2010 MBP (6,2). I have already read the AHT info provided by Sean's link, and they are less than helpful. I'm sure they will be helpful to those who find that they work, but they are confusing if this is not the case. For example, my MBP(6,2) came with ONE (not two) installation disks, so the instructions don't work for me. Another issue is the instructions confound the descriptions related to the MBP, the original (delivered) software (OS X version), and the current installed OS X upgrade software.
    So here's what does NOT work for me... 
         (A) I cannot install 'Disk 2', since I never received this with my original (new) purchase in mid 2010.
         (B) I have checked my firmware versions and they are all up to date, as per Apple's information.
         (C) As suggested in another thread, I looked for /Library/Core Services/.diagnostics and it was NOT present. I followed his instructions, downloaded the correct (I believe) dmg, and installed it. It is in the correct place, and I can see all the invisible files using Pathfinder.
         (D) When I re-start holding down the D key (immediately), it just goes through the normal boot routine; no evidence of AHT.
         (E.1) When I re-start holding down OPT-D, I get a spinning globe, and then it prompts me for a network (wi-fi) connection.
         (E.2) For some unknown reason, the prompt identifies between 2 and 5 of my --neighbors'--  routers, but does not show mine. (??!!)
         (E.3) The routers are listed alphabetically; however, my router SHOULD be at the top of the list by this criterion, but it is nowhere to be seen.
         (E.4) The 'internet recovery' process then allows me to enter a network name AND password. I do this, for my current wi-fi router, and the process rejects it as an incorrect login ID. It is NOT an incorrect login ID! 
    So, now asking Sean and Andy (or anyone else) for further suggestions... ???  As Andy suggested, many people ask questions here because they have -already- worked through the 'official' recommendations, and have found them to be inadequate.
    Any advice would be appreciated!  TIA.
    Ed

  • HT201303 how can i get songs downloaded from other apple products on my shared apple id on to my ipod nano?

    how can i get songs downloaded from other apple products on my shared apple id on to my ipod nano? my daughter just got a new ipod nano for her birthday and we redeemed the shared apple account our family uses and when we went to go buy music it says we need to redeem another card for us to buy the music so i was wondering if i could just let my older daughter download the music onto her phone via itunes app and see if that music would go on my younger daughter's ipod nano but i am looking on the itunes and i don't see an option for that for ipod nanos. thanks so much.

    You should always make sure that you put all of your music on your computer.  From there you can sync it to whatever device you like

  • TS1702 How can I get my downloaded apps to stop crashing after I try to access them?

    How can I get my downloaded apps to stop crashing after I try to access them?

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • How can I get all tracks from an album into the album in my library?

    When importing the albums from a folder, the tracks for some of the albums were split up.  How can I get them in one?

    Hello JudyD276
    The article below will give the steps to get the songs grouped together for you.
    Why aren't songs with the same album art grouped together?
    http://support.apple.com/kb/TS1468
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • How can I get a file to copy all of the files in a directory except itself and the source of the copy function will be the directory the final program is in?

    How can I get a file to copy all of the files in a directory except itself and the source of the copy function will be the directory the final program is in? This application must be in Lab View 8.

    you mean something like this (see below)?
    Now you may have to implement code to check if the destination folder exists and to create it, etc.  But if you use the Front Panel Control to select the destination folder, it should be okay.
    Not the best implementation, mind you but you'll get the idea..
    Message Edited by JoeLabView on 04-18-2007 03:43 PM
    Attachments:
    copy folder contents.PNG ‏10 KB

  • How can I Publish to a Folder just one of the several websites I have created using iWeb?

    How can I Publish to a Folder just one of the several websites I have created using iWeb?
    it drives me nuts having to emove all the other websites when I want to upload one. 
    Sparrow

    For iWeb, I like to do only one site per domain file.  I move domain files out of the Application Support folder and place them inside project or client folders, or in DropBox. Once you duplicate a domain file and begin customizing it, it will load and behave as a separate project/site.
    I publish each iWeb domain/project direct to a server via FTP. Sometime I publish to a folder, then upload via FTP manually.
    iWeb is a remarkable tool, especially when you work from scratch with blank tamplates
    Here are a few of my iWeb sites:
    http://www.newcovenant.org
    http://www.visionmultimedia.org
    http://www.visioncomsolutions.com

Maybe you are looking for