How can I get my Final Cut Pro 7 to Work with 10.8 Lion?

I get these two messages and then Final Cut Pro shuts down. Please don't tell me to use FCProX because I don't have time to learn a new system and need to edit a project today. Anyone who has real info on this please help! Thank you SO MUCH! xoxo

Use Disk Utility to repair the permissions on your system disk.
Download Preference Manager (free) from Digital Rebellion
http://www.digitalrebellion.com/prefman/
to trash your FCP preferences.
MtD

Similar Messages

  • How do I transfer my Final Cut Pro X Trial work to my paid full version?

    How do I transfer my Final Cut Pro X Trial work to my paid full version?
    I can't seem to find a way to do this.

    Kriscass wrote:
    I am having issues with this, too.  I currently have both the trial version and the purchased version, and I've done a lot of work in the trial that I MUST get access to, but it's not showing up in the paid version (contrary to what is stated above... that it shows up in the paid automatically).  I am worried that if I delete the trial all my days of work will be trashed.  It is critical that these files transfer...is it truly as simple as deleting the trial?  Why was that not said anywhere in the loading directions? Feeling truly frustrated!
    What version is the trial? Is that a 10.0.*?
    What version is the purchased version?

  • How can I get my HP Officejet Pro 8100 to work. I had HP  on the phone for over two hours and thought it was fixed. Now it just will not print at all.

    How can I get my HP Officejet Pro 8100 to work.
    I'm using an  iMac (21.5-inch, Late 2013) running Yosemite. I spent hours on the phone with HP who did their best and thought they had solved the problem Now it has stopped printing completely. Just says 'idle' or' connecting to printer' but never does.

    Greetings paulr.paulr,
    Welcome to the Apple Support Communities!
    I understand that you are unable to print from your Mac running Yosemite on your HP Officejet Pro 8100. I know that printer issues can be very frustrating, but I believe the information in the attached article will be able to assist you. I would suggest reading over and systematically working your way through the suggested troubleshooting steps located in the following article. If any issues arise as you work your way through the steps, or if you work your way completely to the end and reset the printing system and the issue continues, please let me know. 
    OS X Yosemite: Printing troubleshooting
    Cheers,
    Joe

  • Final Cut Pro does not work with Yosemite. Can it be fixed?

    Final Cut Pro does not work with Yosemite. Can it be fixed?

    Hi Tom, I don't know if you can help me.
    I'm using Final Cut version 10.1.4 with Yosemite 10.10.2 and whenever I open FCP it opens for about 5 seconds (not allowing me to click anywhere) before closing with the message  "Final Cut Pro quit unexpectedly. click reopen to open the application again. This report will be sent to apple automatically." I have tried opening it multiple times and the same thing has been happening over and over again and i've tried everything I could find on the internet and nothing is working.
    HELP.
    Jada.

  • Will final cut Pro 7.0 work with ATI Raedon X1600

    Will Final Cut Pro 7.0 work with a ATI Raedon X1600 Graphics Card

    If you want to check other applications for compatability:
    http://roaringapps.com/apps:table

  • How can I get address book 4.1.2 to work with osx 10.6.7

    How do I get address book 4.1.2 to work with osx 10.6.7

    You probably can't, but you can start by posting your queston in the correct forums...the OS X Mail and Address Book forums, as this forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to your question in any way.

  • How can I get a version of Final Cut Pro X that works on OS Mountain Lion?

    I just downgraded my laptop to its original OS (Lion) and will be upgrading soon to Mountain Lion because this laptop is too old to work with Mavericks or Yosemeti. So far Final Cut Pro X, Motion and Compressor (which I had originally purchased when I first bought the computer) do not work. Will Final Cut Pro X work on Mountain Lion? If not, what can I do to get a version that will work?
    Thanks!

    10.0.9 is the latest version compatible with Mountain Lion.   I found this article which may help you:
    http://thefcpxeditor.tumblr.com/post/70885235923/what-i-can-run-fcp-x-10-1-and-1 0-0-9-on-the-same
    At the time it was written it was apparently possible to download from the app store with a computer running ML.  Maybe this is still the case.
    FCP 10.1. has video requirements which are not met by older machines.  I'm not sue about 10.0.9 but that might possibly be a 'gotcha'
    I'm a bit confused though since if you downgraded you laptop to Lion but Mountain Lion is the latest OS it will run then you must have been running ML already
    Geoff.

  • HT4115 How can I get my Final Cut Express 4 projects into Final Cut Pro X?

    I'm going to be switching to OSX Lion, and will have to update Final Cut, since express won't run on Lion. Thus I have to get X. With the new 64-bit Pro X is there a way to open my past projects? I know that at one time you could open up older versions of FC in higher and newer versions. I've heard about Assisted Editing's 7toX for Final Cut Pro application that allows you to convert your old FCP 7 files to be used in FCP X. Does anyone know of the best way I can assure not loosing all my current work?

    You can't import FCE projects into FCP X but you can import the media.
    You may well find that FCE will work on Lion.
    It seems OK on mine.
    Why do you want to go to Lion? Snow Leopard is probably a better OS in many ways.

  • How can I upgrade from Final Cut Pro X 10.0.4  to 10.0.7

    I need to upgrade from Final Cut Pro X 10.0.4 to 10.0.7 but can not find how to do this. Can anybody help?
    Thanks.

         You might do some web searching on "FCPx  torrent ".  I would think that if you have a legitimate copy of FCPx there would be no legal/moral issue with pulling down a 10.0.7 version via bittorrent, but I'm not a lawyer. And of course there are other issues relating to such software but as Tom implies, you can't get an older version from Apple so you'll have to find somebody, somewhere with a 10.0.7 copy that you can install.

  • How can i uninstall the final cut pro x trial version after installing final cut pro x

    How can I unintall the trial version of the final cut pro x after installing the new updated final cut pro x 10.2

    I have the same issue. There are now two version of FCP X: the trial one and the purchased one. Problem is, the first hasn't been overwritten by the second, and all my projects are only visible on Final Cut Pro X Trial, and nothing on FCP X.
    How and where do I get a fast answer from customer support?
    Thank you

  • HT5127 how do i get the final cut pro X trial for an additional 30 days

    My trail 30days for Final Cut Pro X expired but I remember reading that you can get it for an additional 30days is this true?

    There are 2 ways  .............   you buy a new Mac (or use a different one) and the trial will work for a further 30 days.
    This way you can keep using the trial forever, but it will cost you around £1000 every month to renew your computer.
    The other  way that is free  ............  at the end of each month you completely erase the hard drive and reinstall the OS and all the apps etc.

  • How can I convert my Final Cut Pro 5 projects to Final Cut Pro X using XML via 7 to X?

    I have been using Final Cut Pro 5 for years and I was considering upgrading to FINAL CUT PRO X.  But I soon learned about the compatibility issues which leaves me with a bit of a dilemma.  Then I learned about 7 to X, which apparently can convert FCP7 projects via XML to FCPX.  That made me wonder if I can XML all my FCP 5 projects and have FCPX open them.  Is this possible?

    Best to post this question in the FCPX forum.
    x

  • Final Cut Pro 5 not working with JVC BR-HD50/HD-100U

    The footage was shot in 720/30p on the HD-100U which is supposed to work with FCP5. I am using the HD50 deck. I can log the footage but only see black going to the Log & Capture window. I have checked all the settings on the deck and in FCP with no luck. I did get it to capture 853x480 footage that was uncontrollable. FCP does not recognize it on the timeline but does in the viewer. Any suggestions?

    welcome to the forum!
    You'll get good advice here and it's worth a visit even if you don't have a problem - you'll learn a lot from reading the posts.
    This is a good workaround for curing your camera recognition problem:
    First, check that your Easy Setup / Timeline / Camera or Deck Settings are all exactly the same, then making sure your camera or deck is in VTR mode, try to capture again.
    FCP uses a different form of QT than iMovie for capturing, so if the camera works in iMovie (or if it's listed in System Profiler) but not FCP, it obviously means your Mac can see the VTR but FCP can't, so you need to do this QuickTime fix.
    http://docs.info.apple.com/article.html?artnum=301852
    Follow the instructions carefully and you should have things running in no time but note that if you have QT Pro, you’ll have to re-purchase it.
    If the Camera / Deck isn't recognised by iMovie or System Profiler, try resetting the Firewire Bus . . . Turn off the Mac and disconnect the power and all Firewire cables. Leave it for 30 mins then connect back up.
    Still not working? Try a different Firewire cable.
    Failing all this, try resetting the PMU (Power Management Unit). The method varies from machine to machine, so visit the Apple site and search for it in support.
    Don't use iMovie for capturing - it doesn't give you a timecode and that's very important.
    Let us know how you get on!
    Andy
    G5 Quad 8GB. 250+500 GB HDs. G-Raid 1TB. FCP 5.1.1. Shake 4.1. Sony HVR Z1E   Mac OS X (10.4.7)  
    "I've taught you all I know, and still you know nothing".

  • How can I get an old Casio CTK-593 to work with Logic Express?

    Title pretty much says it all.
    I have a Fast Track USB from M-Audio to connect it to my pc but I don't know how to get it working with Logic.
    Thanks in advance.

    Did you check your connection with the audio-midi-setup.app in the programs/utilities folder of your MAC (not "pc" pls)?
    If you have a working MIDI connection, you'll need to open up a software instrument track within Logic to play Logic's instruments via your keyboard.
    Fox

  • How can I get my Toshiba fingerprint password utility to work with ff4?

    My tosiba laptop has a utility that would remember usernames and passwords, so that I could just swipe my finger and the details would prepopulate - this worked in previous version of ff but not ff4

    Take a look at this page to determine if your model is compatible:
    http://help.apple.com/imovie/cameras/en/index.html?lang=en_US
    If you can't get it to work, post back - as long as you can get your memory card to appear on the desktop, you can use something like MPEG Streamclip to convert the video to a format iMovie can work with.

Maybe you are looking for

  • Can't combine InDesign files to single PDF file

    I'm using Windows XP, Acrobat 8 Professional, InDesign (CS3). Here is the problem: When trying to combine three InDesign files into one single PDF file with Acrobat 8, I get an error message saying something about expecting PDF default presents but g

  • Roll back when trying to install iTunes with the version higher than 10.5

    I insall successfully with the iTunes with the version under 10.5. But my iPhone is not supported with those version. So I tried the new versions that are higher than 10.5 but a problem occurred during the installation. "An error occurred during the

  • BI 7 Portal - BEx Web Analyzer- URL used is not fully qualified.

    Hi folks, I have a problem while accessing BEx Web Analyzer on BI 7 Portal. When I select "Business Intelligence"  ->  "BEx Web Analyzer". This is ending up with a 500 Internal Server Error Error Description com.sap.ip.bi.base.exception.BIBaseRuntime

  • Log a user activity

    Hi. I want, for certain users, to log all activity within my database. I want to know every object they've accessed, every query issued, etc. Anyone know how to do this? I'm running 9i. Thanks KH

  • JTable Java 1.6 Bug Progress ??? Work Around ?

    I was just wondering if there was a work around for the following bug on java 1.6 ??? http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6568959 This has been really annoying me because it's a requirement to use JInternalFrame and of course they want