How can I get my graph to stop auto-scaling?

I am not a new programmer and I know how to make a graph auto-scale... IF I want it to.  However, I have a cluster of graphs (strip charts and waveform graphs act the same) that take in values and update each time.  My issue is that I have a static window size and all of the graph start out 'square' with each other.  Then based on how large the y-axis numbers of each different graph get the whole graph grows and shrinks accordingly.  So it kind of makes my graphs look like a sideways equilizer settings type thing from my stereo.
I'd like to keep the x-axis from changing size based on the y-axis number size.  If anyone can help it would be greatly appreciated.  I can send a sample of the problem if necessary.
Thanks,
Barney

This link was ok... but it still did not solve my problem.  I saw the 'Advanced... Reset Scale Layout' but that made my graphs larger than I'd like them.  So when I resized them the problem persisted.  Also, I don't really have the option to swap sides on my y-axis. 
It worked fine in LabVIEW version 6.1 but since the upgrade to LabVIEW 7.1 it hasn't worked.
I've attached a VI.  Note how the left side of the graph grows and shrinks as the graph progresses. 
Any ideas?
Attachments:
TestGraphProb.vi ‏140 KB

Similar Messages

  • How can I get my iphone to stop losing the signal?

    How can I get my iphone to stop losing the signal?

    Thanks for the tip.  If only I could find somewhere where I did not lose the signal.
    I am based in the United Kingdom. The carrier is Orange.
    I lose the signal inside buildings and outside of buildings.  It happens at work and at home.  It happens in Centarl London in the open air and inside.  It happens in small towns.. It happens in the countryside.  It happens in motor cars.  It happens in airports.  It happens when the battery is fully charged, when it is half charged and when it's low on charge.  It happens using the phone, when reading messages and when using the internet.
    Hope this helps.

  • I have 2 games Words with Friends and Cityville that receives a Pop-up message form iTunes...  "Connect to iTunes to use Push Notifications" and will not allow me to exit out of the app or play.  How can I get this message to STOP?

    I have 2 games Words with Friends and Cityville that receives a Pop-up message form iTunes...  "Connect to iTunes to use Push Notifications" and will not allow me to exit out of the app or play.  How can I get this message to STOP?

    Yes - I connected my phone to my computer / Itunes and went into the apps section, but from there I have no idea how to manage the push notifications.  I even tryied going into itunes that is installed on my phone.  I still cannot find anyplace to manage these popups.  I have also gone into settings - notifiations - and tried turning all notifications for these apps all off but that didnt work either.  Any guidance is MUCH appreciated - Im not sure where to go from here.

  • I tried to encrypt using file vault but it froze slowing my macbook pro, how can i get things moving or stop the encryption

    i tried to encrypt using file vault but it froze slowing my macbook pro, how can i get things moving or stop the encryption

    Back up all data before proceeding. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    Start up in Recovery mode. When the OS X Utilities screen appears, select Disk Utility.
    In the Disk Utility window, select the icon of the startup volume from the list on the left. It will be nested below another disk icon, usually with the same name. Click the Unlock button in the toolbar. When prompted, enter the login password of a user authorized to unlock the volume, or the alternate decryption key that was generated when you activated FileVault.
    Then, from the menu bar, select
              File ▹ Turn Off Encryption
    Enter the password again.
    You can then restart as usual, if the system is working. Decryption will be completed in the background. It may take several hours, and during that time performance will be reduced.
    If you can't turn off encryption in Disk Utility because the menu item is grayed out, you'll have to erase the volume and then restore the data from a backup. Select the Erase tab, and then select
              Mac OS Extended (Journaled)
    from the Format menu.
    You can then quit to be returned to the main Recovery screen. Follow these instructions if you back up with Time Machine. If you use other backup software, follow its developer's instructions.
    Don't erase the volume unless you have at least two complete, independent backups. One is not enough to be safe.

  • HT5129 I keep getting the message MobileMe has been discontinued - iPhoto willmove albums you have published to MobileMe Gallery. . .  but I have not knowingly published any photos to MobileMe.  How can I get this message to stop.  It's getting annoying.

    I keep getting the message MobileMe has been discontinued - iPhoto willmove albums you have published to MobileMe Gallery. . .  but I have not knowingly published any photos to MobileMe.  How can I get this message to stop.  It's getting annoying.
    Also, how can I remove duplicate photos in an album without doing it manually?
    Thanks!

    When the prompt pops up next time you start iPhoto select Learn more. Then click on iPhoto preferences and select the Accounts tab. Delete your MM account and the quit iPhoto. Next time you open iPhoto the problem should be eliminated.

  • Outlook closes and will not download a particular message.How can i get that message to stop coming to my inbox?

    outlook closes and will not download a particular message.How can i get that message to stop coming to my inbox?

    Hi,
    May I ask your intention by doing this? Is the particular message harmful to your computer?
    Which type of email account are you using? If you want to prevent a particular message from being downloaded to Outlook, we can login to the web interface of your email account and then remove the particular email from your Inbox.
    If I've misunderstood something, please feel free to let me know.
    Regards,
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • How can I get my graph to plot vs. my data points instead of vs. time?

    how can I get my graph to plot vs. my data points instead of vs. time?

    Maybe you could exaplin in a few more words what "my data" is. Are the values equally or randomly spaced?
    If they are equally spaced, just adjust offset and multiplier, and axis label.
    If they are randomly spaced you are probably looking for an X-Y graph. Check the shipping examples.
    LabVIEW Champion . Do more with less code and in less time .

  • How can I get iTunes 11 to stop showing iTunes Match songs on a computer for which iTunes Match is not enabled?

    How can I get iTunes 11 to stop showing iTunes Match songs on a computer for which iTunes Match is not enabled?

    Found it: PREFERENCES --> STORE --> uncheck "Show iTunes in the Cloud Purchases."

  • How can I get my iPhone to stop promting me to enter my wife's Apple ID when updating apps? I've checked settings for iTunes

    How can I get my iPhone 6 to stop prompting me to enter my wife's Apple ID when updating apps? I have verified in settings that my acct is listed in itunes & App Store, as well as icloud. i can download new apps fine. Have shut down phone and re-powered, have tried plugging into my iMac while signed into my iTunes acct. Can't figure out what to do next?

    Is the comp a synced device to your apple ID and approved as an active device for this synchronization?
    Just cloud the sync once, activate the comp to your apple I'd in iTunes, ensure all software is up to date, turn on home sharing between the devices and you can reinstall the apps from the apple id purchase history via download.
    You basically cleaned out the canonical data apple uses to validate all that, which was backup data. Like iOS devices have the purchased option on the App Store now, syncing the devices via the home sharing and properly activating them will give your comp the purchased cloud and free up 10gs of space on the precious solid states smaller drives.
    Hope that helps...
    If you need to know the menu to find this info, let me know. But the info is easily accessible in the help menu.

  • How can I get the tabs to stop showing the pages I just visited

    I don't want the sites/pages I visited to show up in thumbnails. How can I get this to stop?

    Hello mtroop24, you mean the thumbnails when you open a new tab ?
    see: [https://support.mozilla.org/en-US/kb/new-tab-page-show-hide-and-customize-top-sites#w_how-do-i-turn-the-new-tab-page-off How do I turn the new tab page off?]
    thank you

  • OSX sometimes places 31 character limit on file names. How can I get this error to stop?

    This error notice doesn't make sense, since many of my file names exceed 31 char. This error message pops up when saving documents, esp. web pages. As a consequence, OSX will refuse to let me save the file, until I shorten the name and so remove informative identifying features of the file name. But most of the time, OSX is perfectly happy to save files with names longer than 31 char. How can I get this error notice and block to turn off?

    I have also seen this issue it occurs regularly when transferring word documents files from my Macbook Pro running OSX 10.5.8 to my iMac running 10.9.4.
    My iMac HD should be formatted to factory standards as well since I have not mucked around with it since I bought it.

  • How can I get "Canceling sync" to stop?

    How can I stop "Canceling sync" to stop?  My iphone and ipad both got stuck on this step after syncing.  How can I stop it?

    Thanks for the tip.  If only I could find somewhere where I did not lose the signal.
    I am based in the United Kingdom. The carrier is Orange.
    I lose the signal inside buildings and outside of buildings.  It happens at work and at home.  It happens in Centarl London in the open air and inside.  It happens in small towns.. It happens in the countryside.  It happens in motor cars.  It happens in airports.  It happens when the battery is fully charged, when it is half charged and when it's low on charge.  It happens using the phone, when reading messages and when using the internet.
    Hope this helps.

  • My daughter put my sim card in and loged into my itunes acount but now she has put her own sim in and deleted my contacts that showed up on her phone and it has deleted all the contacts of my phone too, how can i get them back and stop it happening again.

    My daughter but in my sim card and loged into my iunes account to get apps untill she got her own sim but my contacts appeared on her phone so when she got her own sim she deleted the contacts of her phone it deleted them of mine too. how do i get them back?

    The SIM has nothing to do with that. She used your Apple ID to buy apps/music, thus your contacts that were synched with iCloud got replicated on her phone. Any changes she made got reeplicated on her phone. There is no way to recover the deleted contacts unless you backed up your phone.
    Your daughter needs to get her own Apple ID.

  • How can I get a .swf to stop playing using a button?

    I've placed two .swf files inside my InDesign CC doc. and would like to control them using specifically created 'play' and 'stop' buttons. My InDesign file will be / is exported as a .swf also, as it has animations and interactivity.
    One .swf is a looping animation (created in a separate InDesign doc.) and the other is a Captivate file published as a .swf.
    When I create a 'play' button to play the .swf it works as expected, however when I create a 'stop' button and assign the Action 'Stop' or 'Stop All' it does not work and the .swf continues to play on the page.
    When I change page within my InDesign document the two .swf's continue to play; I know this because despite not being able to see them still playing (as I'm on a new page now), one of the .swf's - the Captivate file - has audio and continues to play on the new page I'm viewing.
    When I return to the page where the two .swf files are located they appear to have stopped and can be re-played, but what is actually happening is that the .swf's are still playing in the background with the option to press play for the same two .swf's - meaning I'll have a total of 4 .swf's playing at the same time - two behind the original two.
    I know there is a similar 'unload' issue when playing a .swf inside a swf. in Flash and that you can create ActionScipt to either unloadAll or killAudio but I don't know how to resolve this with InDesign as I'm not aware of either being able to access the InDesign code or there being an actual fix for this.
    Would appreciate some help, if possible.
    Thanks.
    James.

    Hmmm. Behind the safari window? Try command-tab for quicktime X and bring to the front?  Quit all apps and start over?

  • How can I get XY graph look like that picture

    Hi everyone
          They are two picture (one name is "I want "(call picture 1),other is "I have""(call picture 2),) in the attach.  I want get the form of the picture 1.
    They are a lot of different.
    1 The background color is different. I want get the color as picture (white).
    2 The y legend in the picture 1 have different position, but I can do it.
    Someone can give me any suggestion?Can  I  using other method ?
    Attachments:
    i want.jpg ‏53 KB
    i have.jpg ‏41 KB

    Hello,
    This attached file might help you.
    Might be this graph will fulfill your need.
    Regards
    Prabhakant Patil
    Attachments:
    Graph.vi ‏8 KB

Maybe you are looking for