How can I get my HP desk jet 3054 to AirPrint with my iPad? It does not recognize any printer
Bought new HP DESKJET 3054 printer, it air prints with my MacBook pro but not my iPad. It reads "no printers found" when I want to print. Can I get some help with this one ? The iPad works on same wifi as printer but does not find printer. However it does work with MacBook pro .please help.
Welcome to Apple Support Communities.
Apparently your DeskJet is not on the 'official' list of AirPrint supported HP printers: http://support.apple.com/kb/HT4356
If you don't mind tweaking OS X a bit, try the tweak in this thread, originally started in November 2010.
https://discussions.apple.com/thread/2658720?threadID=2658720&tstart=0
I'm successfully using it with OS X 10.6.7 and 10.6.8 and an iPad 2 using iOS 4.3.1 to a USB-connected HP LaserJet 1320 and a WiFi-connected Canon MP560.
Note that with this modification, your Mac must be on and awake for iPad printing to occur.
Others in the Support Communities use iPad printing apps such as Printopia. I've found that this tweak meets my needs, so I haven't tried any other apps. Also check for an HP app for your printer, and make certain that your printer has the latest firmware installed.
Similar Messages
-
I have an iTouch with songs that are on there from my CDs as well as purchased songs from iTunes. Currently my iTouch plays all of my music. When I went to sync my new iPhone4S using my PC (Windows with latest upgrade), it only will sync songs I purchases from iTunes. It appears all of the music on iTunes that I put there from my CDs have an ! next to them, and they will not sync to my new phone. How can I get my iTunes account to recognize my CDs as legal muisc that I can put on my iPhone? I do not want to reload all 1,600 songs from my CD collection.
Songs with an exclamation mark against them are songs that iTunes can't find. Possible causes are that you or some third party tool has moved, renamed or deleted the files, or that the drive the live on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2 -
I have MAC OS X 10.6.8 (up-to-date). How can I get screen mirroring to my Apple TV to work? The icon does not appear at top status bar..
Welcome to the Apple Support Communities
See > http://support.apple.com/kb/HT5404 AirPlay Mirroring is compatible with Mid 2011 and newer MacBooks Air, and OS X Mountain Lion.
As you have Mac OS X Snow Leopard, you haven't got a compatible MacBook Air, so you can't use AirPlay Mirroring. However, you can use a third-party app as AirParrot to mirror the MacBook onto your Apple TV > http://www.airparrot.com -
How can i get my hp office jet j4550 to print from word 7?
How can I get my HP Office Jet j4550 to print from the Microsoft Word 7? I downloaded the drivers for the printer and reinstalled Microsoft Word 7.
Do you mean Windows 7?
======================================================================================
* I am an HP employee. *
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
***Click on White “Kudos” STAR to say thanks!*** -
My macbook pro and ipad does not recognize my printer on my wireless network, but my pc does. How can I get my apple products to see it on the network so I can print wirelessly? My printer is a Brother MFC-J270W
try disabling email scanning for incoming mail.
One of the last things that occurs is the mail server and Thunderbird sign off on "where we are up to" and Thunderbird stores this state information in the popstate.dat file in your profile (there is one in each POP mail account folder). If the anti virus, or you for that matter, end the conversation a few seconds early that hand off does not occur and the popstate is not stored. -
How can I get my itunes library back onto my laptop from my ipad
How can I get my itunes library back onto my laptop from my ipad?
Here is one way: http://www.copytrans.net/copytransmanager.php Google for more.
Why isn't the library on your computer? -
How can I get the phone numbers in contacts to appear with dashes between the first 3 numbers, the next 3 numbers, and the last 4 numbers? Until very recently
it did so. Contacts on my macbook pro does show up this way. I do have a mobile me account and in the past syncing was no problem. What setting has changed?The phone number format as well as the date language and format and the time format are controlled by the Region Format setting. Go to Settings > General >International > Region Format. When you change a region format, you can go back one page (to International) and see an example of the date/time/phone number format that your selected region format will produce.
-
We need the Request Restart ability when scheduling a single reoccurring job in Redwood. Most of our jobs are scheduled in CHAINs which offers the Final Status Handler on Step level, and the schedule is "paused" when a job in the CHAIN has failed ( the next instance does not populate until the OP MSG has been Replied to) , and once the OPERATOR message is replied to, the CHAIN can resume running again ( desired ) . But we need this same ability when scheduling a single job not in a CHAIN. In our testing, we set up a job with Request Restart chosen on the Error , Killed and Unknown selections on the Restart Behavior Tab. But we found when a job is scheduled say once a day at 8AM, and when it fails, an OPERATOR msg appears allowing a Restart choice ( desired), but the next day's schedule also populates ( undesired) and we do NOT want the schedule to continue on yet because we need a chance to fix the error before the next insance runs for business reasons. So how can you get the schedule of a single reoccurring job with Restart ability in Redwood to pause when it has failed...?
Hello Fran,
You can wrap the job chain in a master job chain in the first step and set the final status handler there.
You can also set the Restart Behavior to 'Stop Submit Frame', in that case you will have to resubmit the job once you are finished troubleshooting.
Regards Gerben -
Why I'm lost my Bookmarks Bar when I upgrade my mobile me to icloud? How can I get it back to my iMac, iPhone 4, iPhone 4S, iPad, iPad2?
last thing you can try would be go to settings, general, settings, reset all settings
if that does not work, a factory restore will be needed... -
Hi ,how can I get a list of all laptops or users with folder direction enabled or offline files enabled, be it sccm
or poerwshell . i have struggled for a week
tchocrHi,
There is no such PowerShell command can achiev this. Maybe you can use a script to get the user name with folder redirection enabled. However, I am not familiar with writing script, and it would be better for you to ask in script forum below for professional
assistance:
http://social.technet.microsoft.com/Forums/en-US/home?forum=ITCG&filter=alltypes&sort=lastpostdesc
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
How can I get a list of all laptops or users with folder direction enabled or offline files enabled, be it sccm or poerwshell . i have struggled for a week.
Hi,
There is no such PowerShell command can achiev this. Maybe you can use a script to get the user name with folder redirection enabled. However, I am not familiar with writing script, and it would be better for you to ask in script forum below for professional
assistance:
http://social.technet.microsoft.com/Forums/en-US/home?forum=ITCG&filter=alltypes&sort=lastpostdesc
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
How can i get Google maps back on, i lost them with the ios6 update, the new maps are terrible
how can i get Google maps back on, i lost them with the ios6 update, the new maps are terrible
It's still not known if and when Google Maps becomes available in the AppStore. This is today's story: http://www.macrumors.com/2012/09/25/google-has-not-yet-submitted-a-google-maps-a pp-to-apple/
-
After copying a movie to the harddisk of my MacBook I wanted to also copy it to my iPad, but for this you first have to copy it to the library in iTunes, but this doesn't seem to be working. So how can I get this movie to the library ? And to the iPad ?
How is it not working? And how are you doing it? Drag the movie onto the iTunes icon on the Dock... what happens?
-
I keep getting the message: "what should Firefox do with this file" in Windows XP every time I want to download a file, e.g., adobe, excel, etc. How can this annoying message be deleted? The check box to "open file automatically" does not work!
cor-el,
Thanks for your prompt reply. However, the sources you gave do not seem to apply exactly to my situation. I have attached some screenshots that show what the dialogue box looks like for a pdf download, and what my settings in the Apps panel of Options are. You will note in the first screenshot that I have checked the box to handle this file type automatically; however, the next time I try to download a file of that type, the same dialogue box appears looking exactly like the one shown, so checking the "automatic" option appears to do nothing. The files to be downloaded from my Gmail messages are not generic or altered file types - they are shown as pdf, doc, docx, etc. So while your intent was good, your post did not help. Thanks anyway. -
How can I get the same candy crush level on my phone and iPad?
How can I get the same candy crush level on my phone and iPad?
The only way to synchronize is connecting to FaceBook. I just set up my girl friend's iPhone to connect with FaceBook, which then updated the phone's level; then I downloaded the app (again) on her iPad and selected connect to Facebook. I'm not sure what the downfall of synchronizing through FaceBook is.... all I can tell you is it worked and now her iPad shows the same level as her iPhone. Good luck!
Maybe you are looking for
-
How can I create an application in MSVC 6.0 to access my FieldPoint modules with CVI 5.0 libraries?
I have an application in CVI 5.0 that works. I am trying to export that so I can develop in MSVC. I need none of the UI provided in CVI, all I need are the simple FieldPoint commands provided in FieldPoint.obj. I have been stumped on this for weeks.
-
Query to insert file in Oracle database 9.2.0.1.0
how can I can reafear to a file field of an oracle database 9.2.0.1.0 in a query? Thanks
-
Adding another attribute in jspx page
hi how can i add another attributes in jspx page.In the empdetails Data Controls Palette i expand the application module to locate the lastname column and i h Drag the lastname column into the Structure window before the FirstName. When prompted for
-
Creating a daemon process with processBuilder
Hello, This is our problem, we are creating a new process from a java application, with the processBuilder methods. The idea is to launch this process and when the java application is closed the process continues running. But the problem is that when
-
Deleting consecutive duplicates
hi, i have the below requirements: 1)my table consisits of below records: id, code 1,A 1,A 2,B 1,A i want to remove consecutive duplictaes and my o/p should be 1,A 2,B 1,A 2)second requirement is id,code 1,A 2,A 3,B 4,A i want to remove the duplicate