How can I get my iMac to recognize an external web cam?

My iMac does not see my web cam when plugged into the usb port.  Any ideas?
Christyute

imac doesn't.
Finder / Preferences
Select the General tab.
Select:  External disks

Similar Messages

  • How can a get my iMAC to recognize a newly installed optical drive?

    I recently ordered a new Optical drive for my iMAC 12,1 to replace a damaged one. I followed the instructions online to replace the drive with no issues. I restarted the iMAC and it will not recognize the new optical drive. The optical drive won't accept any disks either. The optical drive is
    Model GA11N
    Manufacturer: HL
    Condition: Brand New never used, without original manufacturer packaging
    SATA interface, Slot-in loading, 12.7mm in height, without faceplate, no eject button. 1 Year Warranty
    with Apple Logo, Special for Apple iMac Intel 20" EMC 2266 A1224 21.5" 2308 27" 2390 2309 2374 Mac Mini Mid 2010
    Write Speed: DVD-RAM :5X DVD+R :8X DVD+R DL :4X DVD-R DL :4X DVD+RW :8X DVD-R :8X DVD-RW :6X CD-R :24X CD-RW :24X Read Speed: DVD-ROM/DL: 6X CD-R:24X CD-RW: 24X CD-ROM: 24X
    How can a get the iMAC to recognize this new optical drive?

    Here are some sources for Mac compatible optical drives that wiil work with your 2011 iMac.
    http://eshop.macsales.com/item/OWC/VLU2SD24XS/
    http://eshop.macsales.com/item/OWC/MR3F82SD24S/
    http://www.amazon.com/Aluminum-External-Super-Drive-Apple--MacBook/dp/B007FUDKB4 /ref=sr_1_1?s=electronics&ie=UTF8&qid=1392328000&sr=1-1&keywords=mac+compatible+ dvd+drive
    http://www.amazon.com/External-Super-Drive-Apple-MacBook/dp/B009XON646/ref=sr_1_ 3?s=electronics&ie=UTF8&qid=1392328066&sr=1-3&keywords=mac+compatible+dvd+drive
    http://www.amazon.com/LG-Electronics-Portable-External-GP40NB40/dp/B009DS6OFU/re f=sr_1_8?s=electronics&ie=UTF8&qid=1392328138&sr=1-8&keywords=mac+compatible+dvd +drive

  • How can I get Log Express to recognize my external keyboard? - NEWBIE

    I'm using a Lexicon Lambda phantom powered converter (I think that's what it's called) to run my Left and Right 1/4" cables to, from my Kurweil master out. Then the USB cable from the Lexicon out, to the Mac. How do I get Logic Express to recognize the Kurzweil so I can record the Kurzweil's on-board sounds rather than using it as a Midi controller?
    Very new to Logic and all of this-any help is appreciated in layman's terms.

    OK - got logic to recognize the Kurzweil keyboard on a new track, I can hear the on-board Kurzweil piano sounds, but Logic is not recording it. what gives?

  • How can i get my imac to recognize the mx870 scanner

    I originally was using the Canon MX870 via Bonjour to print and scan. Last night, imac would not recognize the scanner. After I deleted the device and tried to reinstall, the system preferences are not giving me an option as having a scanner.

    i was able to speak to an apple customer service personnel and was advised to use the MP Navigator to print and scan.  It worked.

  • How can I get my MacBook to recognize my external hard drive again?

    Hi,
    I own a 500GB Toshiba external hard drive, and I've been using it for months now, and up until today it's worked flawlessly. I never formatted it, I just used it as a mass storage device so that I wouldn't have compatibility issues with PC's because of the formatting. For some unknown reason, today the hard drive decided it didn't want to work; I can't see it in the Finder. However, I tried it on a PC today and it's just fine there. I've never disconnected it without ejecting it first or anything else that I can think of that might damage the drive. I'm at a total loss, though admittedly I'm a novice, so maybe there's something I'm overlooking here. What can I do to fix this problem?
    Another thing: I just upgraded from 10.5.7 to 10.5.8... could that cause issues?
    Thanks! If this is a topic that's already been discussed, please link me to the thread or article.

    Does it appear in Disk Utility? (located in utilities folder of applications)
    If so is it mountable from there?
    And just to check- you are using the same connection (USB or firewire) to connect the PCs and the Mac?

  • After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

    After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

    Refer to this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538

  • HT201269 when i back up my iphone 5 so that i have all the info from my 4s on it, it wont put my music on it or let me do anything with it. how can i get my itunes to recognize that it is my new iphone and let me put stuff on it with out completely resett

    when i back up my iphone 5 so that i have all the info from my 4s on it, it wont put my music on it or let me do anything with it. how can i get my itunes to recognize that it is my new iphone and let me put stuff on it with out completely resetting it?

    What version of iTunes are you running on your computer? You need to update to the current version.

  • How can i get my imac proceed to home page from restarting endlessly?  it will start then start booting then chime then bck to step one, not even hitting the start up page.... plssss help!

    how can i get my imac proceed to home page from restarting endlessly?  it will start then start booting then chime then bck to step one, not even hitting the start up page.... plssss help!

    Hi
    My Powerbook was the same. Only fix is to reinstall OSX from the install CD but be sure not to pick the Format and install clean. Once you boot with the install CD pick the preserve user data and settings.
    On My machine the reinstall looked perfect. My network, email, files and all the programmes were all there. Most apps worked fine but Adobe CS2, Virtual PC and NetBarrier all needed reinastallation as they reported a few files or registration was missing. I went for the 10.4.3 upgrade again and it worked fine.
    Good luck
    D

  • How can I get my iMac to work with scanners?

    How can I get my iMac to work with scanners? The scanners scan just fine, but not to my iMac. I've tried Epson and HP all-in-ones; it makes no diffference. I'm becoming extremely displeased, but don't know at whom I should be displeased, the printer guys or Apple. Help?

    My Epson is able to do scans using Image Capture without any problems at all.
    Allan

  • How can I get my imac to get valid ip numbers?

    how can I get my imac to get valid ip numbers?

    Try renewing you DHCP Lease, click on your system preferences and then click network.  Select your ethernet connect on the left then click the advance button, when the windows opens make sure the TCP/IP tab is selected then click the Renew DHCP Lease, wait a few minutes and then check your IP address.  Also check you DNS by clicking on the DNS tab and taking a look at you DNS servers then should be the same as you other computers. 

  • How can I get my IMac to recognise the scanner part of the HP printer/scanner?  It prints!

    How can I get my iMac to recognise the scanner part of the HP printer/scanner?  It prints!@

    I had a similar problem right after the first update to 10.6.7, which happened to quite a few people.  It took a couple of software updates and then an HP printer update to fix it.  So make sure that all your software updates are up to date.   Mine is an older printer: C6280 All-in-one but scans fine now that my mac recoginises it.  You might want to check on the HP site also.
    It was really frustrating because it had worked fine before.
    laverne's mom
    Message was edited by: laverne's mom

  • How can I get my iMac to show videos, such as those on YouTube, again?

    How can I get my iMac to show videos, such as those on YouTubes, email, AOL, and others, again.

    OK. What happens when you try?
    Have you updated your Flash to the latest video? Worth trying again, just in case you haven't.
    http://get.adobe.com/flashplayer/
    Click Install Now, download, and run the installer from your Downloads folder. Make sure you install it all the way (it'll ask you to quit Safari). Then re-launch Safari and try the video sites again. If that doesn't work, download and run Firefox, and try there - let us know if one browser works and one doesn't.
    Matt

  • How can I get the phone to recognize mini SD Card?

    I have a 32G Sandisk SD Card in the G4 mini but one day the phone said the card was blank and unsupported.  I purchased another SD Card and installed it however the phone does not recognize that I have an SD card.  When I try and save music or pics to the card the phone says I have removed the storage.  How can I get the phone to recognize the card storage?

    First of all do you Mount or Unmount the card from the settings menu before pulling the card out of its slot? Make sure that the option Mount is greyed out in you settings menu when the card is in the phone. If not select it.  If you pull the card out of the phone select Unmount first.  You can also try formatting the card from the same settings menu.  If these two things do not work, then either the card is defective or the card hardware slot is defective.

  • How can i get apple tv2 to recognize more than one computer in my house

    how can i get apple tv2 to recognize more than one computer in my house, I just got it and can only find one of two computers in my home

    Same here. I have 1 ATV2 and 2 computers and each has separate iTunes accounts (mine and my wife's). The ATV menu says "computers" so I presume you can have more than 1 computer on 1 ATV. The big question is how do you set it up?

  • How can I get Acrobat 9 to recognize my new device, epson Workforce 3540 all-in-one.

    How can I get Acrobat 9 to recognize my new device, epson Workforce 3540 all-in-one.

    Hi plichy,
    Are you able to print to your new printer from other applications, or is it just Acrobat that doesn't recognize the printer? This document outlines some printer troubleshooting tips, and is a really great place to start: Troubleshoot PDF printing | Acrobat, Reader
    Please let us know how it goes.
    Best,
    Sara

Maybe you are looking for

  • Unbelievably appalling service from BT - cannot re...

    Please can anyone help me? I moved in to a new house a month ago. I then had a botched broadband installation by an engineer who told me when he came that he didn't really have enough time to do the job. He identified the wrong junction box then stap

  • Updater 7 issue

    I applied the Updater7 to one of our test boxes and am now receiving these errors. We are unable to access the application we have deployed in the application it says page not found. This ear works fine on our non up7 versions. Any ideas? java.lang.A

  • Pagenumber and totalpagecount is always shown 1/1 for .txt format.

    When I export my report in .txt format somehow the pagenumber/totalpagecount is always shown 1/1.So I had placed formulae as page_num :- whileprintingrecords; if recordnumber  = 1  then 1 else if recordnumber mod 10 = 0 then int ( recordnumber / 10 )

  • Deleted app appears in updates page from App Store

    I had installed an app from store named Who is the killer. I deleted the app and now shows as an update and i can't get rid of it. I do not have any back up disks attached. How can i remove this from app store's update section?

  • How do I change background in Elements 12

    I've used Adobe PhotoDeluxe 2.0 for years then had to get a new computer and the old 2.0 won't work on it. In the 2.0 it was EASY to change backgrounds in photos. I haven't been able to figure out how to do that with the layers in Elements 12 and it'