How can I get my iMac to turn on?

My iMac is not responding. I left it unplugged overnight. I have changed batteries in both the keyboard and mouse. They are both working but it seems like they can't find their response on the harddrive.

there is a button on the back lower left corner

Similar Messages

How can i get my imac proceed to home page from restarting endlessly? it will start then start booting then chime then bck to step one, not even hitting the start up page.... plssss help!

how can i get my imac proceed to home page from restarting endlessly? it will start then start booting then chime then bck to step one, not even hitting the start up page.... plssss help!

Hi
My Powerbook was the same. Only fix is to reinstall OSX from the install CD but be sure not to pick the Format and install clean. Once you boot with the install CD pick the preserve user data and settings.
On My machine the reinstall looked perfect. My network, email, files and all the programmes were all there. Most apps worked fine but Adobe CS2, Virtual PC and NetBarrier all needed reinastallation as they reported a few files or registration was missing. I went for the 10.4.3 upgrade again and it worked fine.
Good luck
D

How can I get my iMac to work with scanners?

How can I get my iMac to work with scanners? The scanners scan just fine, but not to my iMac. I've tried Epson and HP all-in-ones; it makes no diffference. I'm becoming extremely displeased, but don't know at whom I should be displeased, the printer guys or Apple. Help?

My Epson is able to do scans using Image Capture without any problems at all.
Allan

How can a get my iMAC to recognize a newly installed optical drive?

I recently ordered a new Optical drive for my iMAC 12,1 to replace a damaged one. I followed the instructions online to replace the drive with no issues. I restarted the iMAC and it will not recognize the new optical drive. The optical drive won't accept any disks either. The optical drive is
Model GA11N
Manufacturer: HL
Condition: Brand New never used, without original manufacturer packaging
SATA interface, Slot-in loading, 12.7mm in height, without faceplate, no eject button. 1 Year Warranty
with Apple Logo, Special for Apple iMac Intel 20" EMC 2266 A1224 21.5" 2308 27" 2390 2309 2374 Mac Mini Mid 2010
Write Speed: DVD-RAM :5X DVD+R :8X DVD+R DL :4X DVD-R DL :4X DVD+RW :8X DVD-R :8X DVD-RW :6X CD-R :24X CD-RW :24X Read Speed: DVD-ROM/DL: 6X CD-R:24X CD-RW: 24X CD-ROM: 24X
How can a get the iMAC to recognize this new optical drive?

Here are some sources for Mac compatible optical drives that wiil work with your 2011 iMac.
http://eshop.macsales.com/item/OWC/VLU2SD24XS/
http://eshop.macsales.com/item/OWC/MR3F82SD24S/
http://www.amazon.com/Aluminum-External-Super-Drive-Apple--MacBook/dp/B007FUDKB4 /ref=sr_1_1?s=electronics&ie=UTF8&qid=1392328000&sr=1-1&keywords=mac+compatible+ dvd+drive
http://www.amazon.com/External-Super-Drive-Apple-MacBook/dp/B009XON646/ref=sr_1_ 3?s=electronics&ie=UTF8&qid=1392328066&sr=1-3&keywords=mac+compatible+dvd+drive
http://www.amazon.com/LG-Electronics-Portable-External-GP40NB40/dp/B009DS6OFU/re f=sr_1_8?s=electronics&ie=UTF8&qid=1392328138&sr=1-8&keywords=mac+compatible+dvd +drive

How can I get dock connector to turn off on air play. There is no longer a choice for sound to be displayed on iPad. I do not own outside speakers. Have already reset. Thanks

How can I get dock connector to turn off on air play. There is no longer a choice for sound to be displayed on iPad. I do not own outside speakers. Have already reset. Thanks

Slow, intermittent. Sometimes bootable sometime not. Odd behavior.
Sounds to me like a classic case of your HD failing.
Your SMART status may still show verified, with no errors on the Apple Hardware Test, Disk Utility shows no problems on Disk Repair- this is of no help.
I trust you have a good back-up and a bootable clone.
http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/

How can I get my imac to get valid ip numbers?

how can I get my imac to get valid ip numbers?

Try renewing you DHCP Lease, click on your system preferences and then click network. Select your ethernet connect on the left then click the advance button, when the windows opens make sure the TCP/IP tab is selected then click the Renew DHCP Lease, wait a few minutes and then check your IP address. Also check you DNS by clicking on the DNS tab and taking a look at you DNS servers then should be the same as you other computers.

How can I get my IMac to recognise the scanner part of the HP printer/scanner? It prints!

How can I get my iMac to recognise the scanner part of the HP printer/scanner? It prints!@

I had a similar problem right after the first update to 10.6.7, which happened to quite a few people. It took a couple of software updates and then an HP printer update to fix it. So make sure that all your software updates are up to date. Mine is an older printer: C6280 All-in-one but scans fine now that my mac recoginises it. You might want to check on the HP site also.
It was really frustrating because it had worked fine before.
laverne's mom
Message was edited by: laverne's mom

How can I get my iMac to show videos, such as those on YouTube, again?

How can I get my iMac to show videos, such as those on YouTubes, email, AOL, and others, again.

OK. What happens when you try?
Have you updated your Flash to the latest video? Worth trying again, just in case you haven't.
http://get.adobe.com/flashplayer/
Click Install Now, download, and run the installer from your Downloads folder. Make sure you install it all the way (it'll ask you to quit Safari). Then re-launch Safari and try the video sites again. If that doesn't work, download and run Firefox, and try there - let us know if one browser works and one doesn't.
Matt

How can I get my iMAC (10.7 Lion) to display all users at start-up?

How can I get my iMac ( 10.7 Lion ) to display all users icons at startup/login?

Hi..
Open System Preferences > Users & Groups
Click the gold padlock icon to make changes. You may be prompted for your admin password.
Now select: List of users next to: Display login window as
Select Off from the pop up menu next to: Automatic login
edited by: cs

How can I get my iMac screen to divide into sections? I'm using OS X 9.2. Thanks.

How can I get my iMac screen to divide into sections? I'm using Maverick OS X 9.2. Thanks.

You cannot split a monitor up into sections in Mac OS X.
You can have separate monitor spaces or desktops that you can access using the Spaces or Mission Control functionality in OS X Mavericks.
You cannot split monitor views into seperate sections
There is no such way to do this in Mac OS X.
Do a search for an app called Cinch OR another app called A Better Snap Tool. Both of these apps are in the Mac App Store.
These may work for you.
http://www.irradiatedsoftware.com/cinch/

How can i get my imac to sync ical from icloud

my iphone and ipad 2 have the correct ical, icloud also has the correct ical, how can i get my imac to sync from them?

Use iCloud to sync the calendar between your MacBookPro and your iPad.
See Settings > iCloud on the iPad and the OS X control panel.
See here: https://www.apple.com/icloud/setup/pc.html

How can I get my wifi to turn on. It remains greyed out

How do I get my wifi to turn on? It remains greyed out. I have tried Network reset. Can anybody help please?

Hello POLLYMER,
Thanks for the question. I understand that your Wi-Fi option on an iPhone 4S is greyed out. The following article explains this issue and potential resolution:
iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/TS1559
Follow these steps to resolve the issue:
1. Verify that airplane mode is off by tapping Settings > Airplane Mode.
2. Reset the network settings by tapping Settings > General > Reset > Reset Network Settings.
Note: This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings
3. Ensure that your device is using the latest software. To do so, connect your device to your computer and check for updates in iTunes.
4. If your issue is still unresolved, perform a software restore in iTunes.
If you are still unable to turn Wi-Fi on, please contact Apple for support and service options.
Thanks,
Matt M.

My ipod touch g2 was fulling charged last night and this morning the screen is completely black and I cant get it open and when I charge it nothing changes.how can i get my ipod to turn back on

my ipod touch g2 was fully charged last night and on. I think i fell asleep on it and this morning the screen is blank and I cant get it to power up. charged it again and still nothing. How can i get it to power back up

have you tried holding the power button and the home button for 30sec till you see the apple logo?

How can I get my iMac to be the primary screen again?

Hi everyone!!
A couple days ago I was watching a movie on my tv, which is my ''external monitor" for my iMac. I used VLC and it was full screen on my tv, I never had any problems with it. After the movie ended, I couldn't get my iMac screen to work. I restarted, and it flashes a white screen and it does make the apple startup sound. Also everything seems to be working just fine. When I hook it up to my TV, I can use my tv as the ''main monitor" but my iMacs screen remains black. (I have it in mirroring mode now) When I restart by pressing the on and off switch, I do get a flash of my current screen, but it fades to black quite soon after. Even if I wake my iMac up, it shows me the log in screen for about half a secodn and also fades to black. So it's not the screen itself that has any issues.
I think I accidentally clicked something in the display settings, but I have no idea how I can get my iMacs screen to work again. Does anybody know how to get my iMac back to functioning as a primary monitor? When I unplug the thunderbolt cable, it doesn't switch back either.
I already tried dragging the apple top bar from one screen to another, but it doesn't work. When I reset the PRAM, it does restart, but right after I hear the second chime the screen still remains black and it boots like it did before, still no functioning iMac screen.
Thanks in advance!

The screen is all black, so it's not the backlight. It's weird because when I get the computer off of sleep mode, it shows the log in screen really quickly. So my LCD isn't broken either. It just switches back to the wrong resolution I guess. Which makes the screen black again.

How Can I get My iMac Running again when its stuck in the Loading boot up Screen?

My 2010 21.5 Imac wont stop loading, The wheel just keeps spinning and it doesn't even boot in safe mode. the only thing i can do is get into single user mode. My Mac doesn't respond to command + r. I am able to pull up a disk to boot from but it doesn't show a recovery disk, only "Macintosh HD", when i click it I'm back at the apple logo screen with spinning wheel.At this point i want to do one thing and that is factory reset the computer. a fresh install, delete everything, NO BACK UPS. I don't have the install CD (This Computer had a previous owner). If i were to buy a copy of the OS X from the apple store (I believe my computer was running 10.6.8, Im not 100%sure and i dont now how to find out at this point) would i be able to even put the CD in the disc drive? would it read the CD even though its stuck in the boot up(loading) screen? How would i get it out if the Drive doesn't read the disk? Do I have Other options? Thanks guys!

You are using Snow Leopard. There is no COMMAND-R for a startup. That's for Lion or later.
Call Apple and purchase replacement discs for your model. You cannot use the retail version of Snow Leopard on your model. You have no other options unless you have the original discs that came with the computer. When you get the discs:
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

How can I get my iMac to turn on?

Similar Messages

Maybe you are looking for