How can i get my ipod starting again???

so i clicked a game then i waited for the game to load but it wasnt loading and then i click the home botton and the screen went black! and i plugged it my computer and nothing happened plain black! wat do i do!

Basics from the manual are restart, reset, restore.
Try each of these.

Similar Messages

  • HT201413 I have restored and updated my ipod from recovery mode however I still have the usb cord and itunes icon on the ipod when it is switched on. How can I get my ipod to work again?

    I have restored and updated my ipod from recovery mode, however I still have the usb cord and itunes icon on the ipod when it is switched on. How can I get my ipod to work again? I have updated and restored 5 times! When connected to itunes it only shows the summary page saying ipod in recovery mode.

    Fixed it!
    1. Made sure itunes software was up to date
    2. Pressed and held 'home' button and 'on-off' button at the same time for about 10 seconds till ipod reset (I hadn't done this step previously)
    3. Connected to itunes
    4. Pressed restore and update ipod
    Update successful and ipod taken out of recovery mode

  • IPod Nano 2nd Generation is requesting 4 digit code. I have never set a lock code. What is this and how can I get my Nano running again?

    iPod Nano 2nd Generation is requesting 4 digit code. I have never set a lock code. What is this and how can I get my Nano running again?

    There is no other way to bypass the combintation lock other than to connect the nano to iTunes and restore it to factory settings, erasing all content and settings from the iPod.
    B-rock

  • TS2771 How can i get my Ipod touch 4g to charge again??

    My Ipod Touch 4th Generation wont charge. It worked perfectly fine on saturday night, when i last plugged it in. I took my ipod off the charger in the morning, and then that night, it would not charge, and then it died. I've tried plugging it in all night and all day, no luck. I've tried plugging it into different plugs around my house, and using different cords, etc. , With no luck. How can i get it to work again????

    Not Charge
    - See:      
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable. .
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar                          

  • My sent messages in outlook for mac suddenly stopped syncing with my iPhone and iPad, all other folders work correctly. How can I get them to start syncing again?

    My sent messages in outlook for mac suddenly stopped syncing with my iPhone and iPad, all other folders work correctly. How can I get them to start syncing again?

    You can disable the Adobe Reader plugin in Firefox (Tools > Add-ons > Plugins) and use the external Adobe Reader application or Preview application instead.
    *Firefox > Preferences > Applications > Adobe PDF document : Use Adobe Reader
    PDF files may also be found under another entry like Portable document.
    *https://support.mozilla.org/kb/change-firefox-behavior-when-open-file

  • One laptop died.  I have a new laptop now.  How can I get my Ipod song list on the new laptop without downloading each c.d.?

    My first laptop died.  I have a new laptop now.  How can I get my Ipod song list on the new laptop without downloading each c.d.?

    See this older post from another forum member Zevoneer covering the different ways to copy content from your iPod to your PC.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • How can I get my ipod to work with itunes?

    When I connect my ipod classic into my new computer it seems that itunes does not recognize it. How can I get my ipod to work with itunes? I'm afraid to disconnect my ipod because the display is saying Do Not Disconnect.

    1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
    2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
    3. Check the USB cable
    4 Verify that Apple Mobile Device Support is installed
    5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
    6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
    7. Check for third-party software conflicts.
    <Link Edited By Host>

  • How can I get my ipod touch to turn on or to charge?

    How can I get my ipod touch to turn on or charge?

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • ICal on my Macbook has always grayed the current date. iCal on my MacMini (both 10.5.8) never has until a few days ago but has since stopped. How can I get it to "shade" again?

    iCal on my Macbook has always grayed the current date. iCal on my MacMini (both 10.5.8) never has until a few days ago but has since stopped. How can I get it to "shade" again?

    At this point I think you should get Applejack...
    http://www.macupdate.com/info.php/id/15667/applejack
    After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
    applejack AUTO
    Then let it do all 6 of it's things.
    At least it'll eliminate some questions if it doesn't fix it.
    The 6 things it does are...
    Correct any Disk problems.
    Repair Permissions.
    Clear out Cache Files.
    Repair/check several plist files.
    Dump the VM files for a fresh start.
    Trash old Log files.
    First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
    Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.

  • I cannot get itunes to download.  I have a PC with windows 7.  I had itunes but got a message that told me to uninstall and reinstall intunes.  I uninstalled but now can't reinstall. How can I get itunes to install again?

    I cannot get itunes to download.  I have a PC with windows 7.  I had itunes but got a message that told me to uninstall and reinstall intunes.  I uninstalled but now can't reinstall. How can I get itunes to install again?  I click on the download itunes button and it immediatly takes me to the page that says thank you for installing itunes.  But it doesn't install.  I'm getting so frustrated!!  Can anyone tell me how to install itunes????  Thanks.

    This iPod Classic Community forum is a bad place to post your problem with iTunes,  phone support wouild be good. but if you like to talk to support people, post your iTunes problem to the iTunes community forum.
    Or you can read this Apple Support Article on Re-installing iTunes
    Have a nice day!

  • How can i get my ipod toout of the white screen

    how can i get my ipod off the white screen

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • How can you get your ipod touch serial number from apple beacause my ipod was stolen

    how can i get my ipod serial number from apple

    http://support.apple.com/kb/HT2526?viewlocale=en_US
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • On my Mac Pro how can I get voiceover to start reading at a specific point on a document?, on my Mac Pro how can I get voiceover to start reading at a specific point on a document?

    On my Mac Pro how can I get voiceover to start reading at a specific point in a document, and then continue on to the next paragraph and so on?  Thank you.  Ed

    Welcome to the Apple family!!!! 
    How can I cause the VO cursor(box) show-up/start?
    Press Control-Option and F5.   The F5 key is located on the top row of keys 6th key over.  This is a toggling "Keyboard Shortcut" for turning VoiceOver on and off.
    How can I move the VO cursor to various sentences or paragraphs of an article and have it start reading ... and perhaps even continue reading on to the next paragraph(s) ... even to the end of the article?
    How to read a website with VoiceOver
    Step 1:  Go to the Website
    A quick keyboard shortcut is Command-L.  This will jump you up to the address bar.  Start typing where you want to go.  i.e "www.thewebsite.com"
    Step 2:  Working with Webpage
    VoiceOver will automatically start reading the website.  You can pause the speech by hitting the 'Control Button'. 
    If VoiceOver does not being reading the webpage, then you might have to "Interact" with it.  If VoiceOver say "HTML Content" then press Control-Option-Space-Down Arrow to interact with the webpage.
    Use Control-Option-Right Arrow to move throught the website.  This will speak "EVERYTHING" on the page.
    Most website that I've found have their articles labeled as 'Heading'.  You can jump from heading to heading, by pressing Control-Option-Shift-H.
    If you'd like an itemized alphabetical listing of the site, press Control-Option-I 
    Press Control-Option-Space on the link or article you want to view.
    Step 3.  Reading from Top to Bottom
    Once you found and clicked on the the article/link, use the same 'Heading' command, Control-Option-Shift-H to find the title. 
    After finding the title, press Control-Option-A will start reading from the title on. 
    Note:  If there are any other items (ads, pictures, etc) it will read those too. 
    Tip:  You might be able to activate a feature called the 'Reader'.  The Reader isolates the article and elimanates the ads  The keyboard command is Shift-Command-R.  You can also find it in the Menu Bar (Command-Option-M) under the word 'View' then 'Show Reader'. 
    I am using a MACPro with OSX, probably Mavericks 10.9 (where would I look to see if that is the correct information?)
    You can find this information under the 'Apple menu' in the Menu Bar.  To access the Menu Bar, press Control-Option-M. 
    Go to Apple Menu > About This Mac.  This will open up another window.  Use Control-Option-Right Arrow until you hear 'Version'.  If you purchased it brand new from Apple within the last six month, more than likely you have Mavericks. 
    Recommanded Articles. 
    AppleVis- Commonly used Keyboard Commands
    Chapter 2: Learning VoiceOver Basics
    Chapter 6: Browsing the internet
    Apple Accessibility Resource Page
    The  'Commands Help' Voiceover Menu. Control-Option-H-H.  (hit H twice)  is my best friend.  It's a searchable VoiceOver Menu with most of the VoiceOver command.  Example:  You are looking for the 'Read Current Paragraph' keyboard command.   Press Control-Option-H-H and then type Paragraph.  It will then bring up all the commands with the word paragraph.  I believe there are three.   
    As from the Trackpad Commands, I've copied and pasted below from Appendix A: Commands and Gestures
    VoiceOver standard gestures
    If you’re using a Multi-Touch trackpad, you can use VoiceOver gestures. VoiceOver provides a set of standard gestures for navigating and interacting with items on the screen. You can’t modify this set of gestures.
    NOTE:Gestures that don’t mention a specific number of fingers are single-finger gestures.
    General
    Enable the Trackpad Commander and VoiceOver gestures
    VO-Two-finger rotate clockwise
    Disable the Trackpad Commander and VoiceOver gestures
    VO-Two-finger rotate counterclockwise
    Turn the screen curtain on or off
    Three-finger triple-tap
    Mute or unmute VoiceOver
    Three-finger double-tap
    Navigation
    Force the VoiceOver cursor into a horizontal or vertical line when you drag a finger across the trackpad
    Hold down the Shift key and drag a finger horizontally or vertically
    Move the VoiceOver cursor to the next item
    Flick right
    Move the VoiceOver cursor to the previous item
    Flick left
    Move content or the scroll bar (depending on the Trackpad Commander setting)
    Three-finger flick in any direction
    Go to the Dock
    This gesture moves the VoiceOver cursor to the Dock wherever it’s positioned on the screen
    Two-finger double-tap near the bottom of the trackpad
    Go to the menu bar
    Two-finger double-tap near the top of the trackpad
    Open the Application Chooser
    Two-finger double-tap on the left side of the trackpad
    Open the Window Chooser
    Two-finger double-tap on the right side of the trackpad
    Jump to another area of the current application
    Press Control while touching a finger on the trackpad
    Interaction
    Speak the item in the VoiceOver cursor or, if there isn’t an item, play a sound effect to indicate a blank area
    Touch (includes tap or dragging)
    Select an item
    Double-tap anywhere on the trackpad
    You can also split-tap (touch one finger and then tap with a second finger on the trackpad)
    Start interacting with the item in the VoiceOver cursor
    Two-finger flick right
    Stop interacting with the item in the VoiceOver cursor
    Two-finger flick left
    Scroll one page up or down
    Three-finger flick up or down
    Escape (close a menu without making a selection)
    Two-finger scrub back and forth
    Increase or decrease the value of a slider, splitter, stepper, or other control
    Flick up (increase) or flick down (decrease)
    Text
    Read the current page, starting at the top
    Two-finger flick up
    Read from the VoiceOver cursor to the end of the current page
    Two-finger flick down
    Pause or resume speaking
    Two-finger tap
    Describe what’s in the VoiceOver cursor
    Three-finger tap
    Change how VoiceOver reads text (by word, line, sentence, or paragraph)
    Press the Command key while touching a finger on the trackpad
    Rotor
    Change the rotor settings
    Two-finger rotate
    Move to the previous item based on the rotor setting
    Flick up
    Move to the next item based on the rotor setting
    Flick down
    To customize other gestures by assigning VoiceOver commands to them, use the Trackpad Commander.
    Assigning VoiceOver commands to gestures
    If you need a reminder about what a gesture does, press VO-K to start keyboard help, and then use the gesture on the trackpad and listen to the description.
    Learning about keys, keyboard shortcuts, and gestures
    Sorry lots of information.  Enjoy.  You

  • I am a new ipod touch user; have gone through all the dowload/install stuff, plugged the device into my computer but ipod screen still shows plug in to tunes.  I am totally computer useless - how can I get my ipod to work, please?  Charles Jones.

    I am a new ipod touch user; have gone through all the dowload/install stuff, plugged the device into my computer but ipod screen still shows plug in to tunes.  I am totally computer useless - how can I get my ipod to work, please?  Charles Jones.

    You did install the latest iTunes (10.5) right?  If the problem was that iTunes does not see the iPod try:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    or
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • When I try to download anything from iTunes or the app store on my iPod touch, my sister's Apple ID comes up instead of my Apple ID. How can I get my iPod touch to ask for the password for my Apple ID rather that of my sister's.

    When I try to download anything from iTunes or the App Store on my iPod Touch, my sister's Apple ID pops up instead of mine. How can I get my iPod Touch to display my Apple ID and ask for my password rather than display my sister's Apple ID?

    You can try to tell the iPod to use yours:
    1. Tap Settings
    2. Navigate to "iTunes & App Store"
    3. Tap Apple ID:
    4. Tap "Sign Out"
    5. Sign in to your account.

Maybe you are looking for